542b839ec7
node, p2p: move network config out of Server
...
This silences a go vet message about copying p2p.Server in package node.
2016-05-18 12:19:04 +02:00
32bb280179
p2p: improve readability of dial task scheduling code
2016-05-02 18:50:15 +02:00
04c6369a09
p2p, p2p/discover: track bootstrap state in p2p/discover
...
This change simplifies the dial scheduling logic because it
no longer needs to track whether the discovery table has been
bootstrapped.
2015-12-17 23:38:54 +01:00
abb53644c6
p2p: always allow dynamic dials if network not disabled
2015-12-03 11:45:35 +02:00
e46ab3bdcd
eth, p2p, rpc/api: polish protocol info gathering
2015-10-28 12:44:15 +02:00
e2d44814a5
Merge pull request #1694 from obscuren/hide-fdtrack
...
fdtrack: hide message
2015-08-19 13:50:54 -07:00
269c5c7107
Revert "fdtrack: temporary hack for tracking file descriptor usage"
...
This reverts commit 5c949d3b3b
2015-08-19 21:46:01 +02:00
edccc7ae34
p2p: continue listening after temporary errors
2015-08-19 14:39:04 +02:00
5c949d3b3b
fdtrack: temporary hack for tracking file descriptor usage
...
Package fdtrack logs statistics about open file descriptors.
This should help identify the source of #1549 .
2015-08-04 03:10:27 +02:00
bfbcfbe4a9
all: fix license headers one more time
...
I forgot to update one instance of "go-ethereum" in commit 3f047be5a
2015-07-23 18:35:11 +02:00
3f047be5aa
all: update license headers to distiguish GPL/LGPL
...
All code outside of cmd/ is licensed as LGPL. The headers
now reflect this by calling the whole work "the go-ethereum library".
2015-07-22 18:51:45 +02:00
bdae4fd573
all: add some godoc synopsis comments
2015-07-07 14:12:45 +02:00
ea54283b30
all: update license information
2015-07-07 14:12:44 +02:00
6994a3daaa
p2p: instrument P2P networking layer
2015-06-24 18:33:33 +03:00
6fb810adaa
p2p: throttle all discovery lookups
...
Lookup calls would spin out of control when network connectivity was
lost. The throttling that was in place only took effect when the table
returned zero results, which doesn't happen very often.
The new throttling should not have a negative impact when the host is
online. Lookups against the network take some time and dials for all
results must complete or hit the cache before a new one is started. This
usually takes longer than four seconds, leaving online lookups
unaffected.
Fixes #1296
2015-06-22 01:07:58 +02:00
3239aca69b
p2p: bump global write timeout to 20s
...
The previous value of 5 seconds causes timeouts for legitimate messages
if large messages are sent.
2015-06-09 17:07:10 +02:00
68898a4d6b
p2p: fix Self() panic if listening is disabled
2015-05-26 19:16:05 +03:00
e1a0ee8fc5
cmd/geth, cmd/utils, eth, p2p: pass and honor a no discovery flag
2015-05-26 19:07:24 +03:00
278183c7e7
eth, p2p: start the p2p server even if maxpeers == 0
2015-05-26 17:49:37 +03:00
9e1fd70b50
p2p: decrease frameReadTimeout to 30s
...
This detects hanging connections sooner. We send a ping every 15s and
other implementation have similar limits.
2015-05-25 01:17:14 +02:00
1440f9a37a
p2p: new dialer, peer management without locks
...
The most visible change is event-based dialing, which should be an
improvement over the timer-based system that we have at the moment.
The dialer gets a chance to compute new tasks whenever peers change or
dials complete. This is better than checking peers on a timer because
dials happen faster. The dialer can now make more precise decisions
about whom to dial based on the peer set and we can test those
decisions without actually opening any sockets.
Peer management is easier to test because the tests can inject
connections at checkpoints (after enc handshake, after protocol
handshake).
Most of the handshake stuff is now part of the RLPx code. It could be
exported or move to its own package because it is no longer entangled
with Server logic.
2015-05-25 01:17:14 +02:00
dbdc5fd4b3
p2p: delete Server.Broadcast
2015-05-25 01:17:14 +02:00
7efeb4bd96
p2p: bump maxAcceptConns and defaultDialTimout
...
On the test network, we've seen that it becomes harder to connect
if the queues are so short.
2015-05-14 03:48:28 +02:00
d4f0a67323
p2p: drop connections with no matching protocols
2015-05-08 16:09:55 +02:00
9c0f36c46d
p2p: use maxDialingConns instead of maxAcceptConns as dial limit
2015-05-08 16:09:55 +02:00
914e57e49b
p2p: fix disconnect at capacity
...
With the introduction of static/trusted nodes, the peer count
can go above MaxPeers. Update the capacity check to handle this.
While here, decouple the trusted nodes check from the handshake
by passing a function instead.
2015-05-08 16:09:54 +02:00
4d5a719f25
cmd, eth, p2p: introduce pending peer cli arg, add tests
2015-05-07 15:30:56 +03:00
af93217775
p2p: reduce the concurrent handshakes to 10/10 in/out
2015-05-07 15:22:09 +03:00
2060bc8bac
p2p: fix dial throttling race condition
2015-05-07 15:22:08 +03:00
29fef349ef
p2p: fix a dialing race in the throttler
2015-05-07 15:22:08 +03:00
3953bf0031
p2p: limit the outbound dialing too
2015-05-07 15:22:08 +03:00
a0cb1945ae
Merge pull request #866 from fjl/p2p-last-minute
...
Last minute p2p fixes
2015-05-06 14:49:52 -07:00
3e2a928caa
p2p: stop dialing at half the maximum peer count
2015-05-06 23:44:51 +02:00
062fa049d0
fixed merge issue
2015-05-06 22:54:21 +02:00
4accc187d5
eth, p2p: add trusted node list beside static list
2015-05-04 13:59:51 +03:00
54db54931e
p2p: add static node dialing test
2015-05-04 13:08:42 +03:00
e82ddd9198
p2p: correct a leftover trusted -> static
2015-04-30 19:34:33 +03:00
413ace37d3
eth, p2p: rename trusted nodes to static, drop inbound extra slots
2015-04-30 19:32:48 +03:00
701591b403
cmd, eth, p2p: fix review issues enumerated by Felix
2015-04-30 16:15:29 +03:00
1528dbc171
p2p: add trust check to handshake, test privileged connectivity
...
Conflicts:
p2p/server_test.go
2015-04-30 16:06:47 +03:00
14f32a0c3a
p2p: reduce the severity of a debug log
2015-04-30 16:04:09 +03:00
de0549fabb
cmd/geth, cmd/mist, cmd/utils, eth, p2p: support trusted peers
2015-04-30 16:03:10 +03:00
fc747ef4a6
p2p/discover: new endpoint format
...
This commit changes the discovery protocol to use the new "v4" endpoint
format, which allows for separate UDP and TCP ports and makes it
possible to discover the UDP address after NAT.
2015-04-30 14:57:33 +02:00
8646365b42
cmd/bootnode, eth, p2p, p2p/discover: use a fancier db design
2015-04-24 18:04:41 +03:00
6def110c37
cmd/bootnode, eth, p2p, p2p/discover: clean up the seeder and mesh into eth.
2015-04-24 11:33:55 +03:00
5f735d6fce
cmd, eth, p2p, p2p/discover: init and clean up the seed cache
2015-04-24 11:23:20 +03:00
635b66acdc
p2p: return zero node from Self if the server is not running
...
This helps with fixing the tests for cmd/geth to run without networking.
2015-04-22 12:31:19 +02:00
5528abc795
p2p: fix the dial timer
...
The dial timer was not reset properly when the peer count reached
MaxPeers.
2015-04-17 08:17:01 +02:00
474aa924ca
p2p: added limiter function to limit package broadcasting
2015-04-14 12:47:31 +02:00
b9929d289d
p2p: fix unsynchronized map access during Server shutdown
...
removePeer can be called even after listenLoop and dialLoop have returned.
2015-04-13 17:37:32 +02:00
