Add efacf056cd

dockerdoom/trunk/opl/dbopl.h

@@ -0,0 +1,206 @@
+/*
+ *  Copyright (C) 2002-2010  The DOSBox Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <inttypes.h>
+
+//Use 8 handlers based on a small logatirmic wavetabe and an exponential table for volume
+#define WAVE_HANDLER	10
+//Use a logarithmic wavetable with an exponential table for volume
+#define WAVE_TABLELOG	11
+//Use a linear wavetable with a multiply table for volume
+#define WAVE_TABLEMUL	12
+
+//Select the type of wave generator routine
+#define DBOPL_WAVE WAVE_TABLEMUL
+
+typedef struct _Chip Chip;
+typedef struct _Operator Operator;
+typedef struct _Channel Channel;
+
+typedef uintptr_t       Bitu;
+typedef intptr_t        Bits;
+typedef uint32_t        Bit32u;
+typedef int32_t         Bit32s;
+typedef uint16_t        Bit16u;
+typedef int16_t         Bit16s;
+typedef uint8_t         Bit8u;
+typedef int8_t          Bit8s;
+
+#if (DBOPL_WAVE == WAVE_HANDLER)
+typedef Bits ( DB_FASTCALL *WaveHandler) ( Bitu i, Bitu volume );
+#endif
+
+#define DB_FASTCALL
+
+typedef Bits (*VolumeHandler)(Operator *self);
+typedef Channel* (*SynthHandler)(Channel *self, Chip* chip, Bit32u samples, Bit32s* output );
+
+//Different synth modes that can generate blocks of data
+typedef enum {
+	sm2AM,
+	sm2FM,
+	sm3AM,
+	sm3FM,
+	sm4Start,
+	sm3FMFM,
+	sm3AMFM,
+	sm3FMAM,
+	sm3AMAM,
+	sm6Start,
+	sm2Percussion,
+	sm3Percussion,
+} SynthMode;
+
+//Shifts for the values contained in chandata variable
+enum {
+	SHIFT_KSLBASE = 16,
+	SHIFT_KEYCODE = 24,
+};
+
+//Masks for operator 20 values
+enum {
+        MASK_KSR = 0x10,
+        MASK_SUSTAIN = 0x20,
+        MASK_VIBRATO = 0x40,
+        MASK_TREMOLO = 0x80,
+};
+
+typedef enum {
+        OFF,
+        RELEASE,
+        SUSTAIN,
+        DECAY,
+        ATTACK,
+} OperatorState;
+
+struct _Operator {
+	VolumeHandler volHandler;
+
+#if (DBOPL_WAVE == WAVE_HANDLER)
+	WaveHandler waveHandler;	//Routine that generate a wave 
+#else
+	Bit16s* waveBase;
+	Bit32u waveMask;
+	Bit32u waveStart;
+#endif
+	Bit32u waveIndex;			//WAVE_BITS shifted counter of the frequency index
+	Bit32u waveAdd;				//The base frequency without vibrato
+	Bit32u waveCurrent;			//waveAdd + vibratao
+
+	Bit32u chanData;			//Frequency/octave and derived data coming from whatever channel controls this
+	Bit32u freqMul;				//Scale channel frequency with this, TODO maybe remove?
+	Bit32u vibrato;				//Scaled up vibrato strength
+	Bit32s sustainLevel;		//When stopping at sustain level stop here
+	Bit32s totalLevel;			//totalLevel is added to every generated volume
+	Bit32u currentLevel;		//totalLevel + tremolo
+	Bit32s volume;				//The currently active volume
+	
+	Bit32u attackAdd;			//Timers for the different states of the envelope
+	Bit32u decayAdd;
+	Bit32u releaseAdd;
+	Bit32u rateIndex;			//Current position of the evenlope
+
+	Bit8u rateZero;				//Bits for the different states of the envelope having no changes
+	Bit8u keyOn;				//Bitmask of different values that can generate keyon
+	//Registers, also used to check for changes
+	Bit8u reg20, reg40, reg60, reg80, regE0;
+	//Active part of the envelope we're in
+	Bit8u state;
+	//0xff when tremolo is enabled
+	Bit8u tremoloMask;
+	//Strength of the vibrato
+	Bit8u vibStrength;
+	//Keep track of the calculated KSR so we can check for changes
+	Bit8u ksr;
+};
+
+struct _Channel {
+	Operator op[2];
+	SynthHandler synthHandler;
+	Bit32u chanData;		//Frequency/octave and derived values
+	Bit32s old[2];			//Old data for feedback
+
+	Bit8u feedback;			//Feedback shift
+	Bit8u regB0;			//Register values to check for changes
+	Bit8u regC0;
+	//This should correspond with reg104, bit 6 indicates a Percussion channel, bit 7 indicates a silent channel
+	Bit8u fourMask;
+	Bit8s maskLeft;		//Sign extended values for both channel's panning
+	Bit8s maskRight;
+
+};
+
+struct _Chip {
+	//This is used as the base counter for vibrato and tremolo
+	Bit32u lfoCounter;
+	Bit32u lfoAdd;
+	
+
+	Bit32u noiseCounter;
+	Bit32u noiseAdd;
+	Bit32u noiseValue;
+
+	//Frequency scales for the different multiplications
+	Bit32u freqMul[16];
+	//Rates for decay and release for rate of this chip
+	Bit32u linearRates[76];
+	//Best match attack rates for the rate of this chip
+	Bit32u attackRates[76];
+
+	//18 channels with 2 operators each
+	Channel chan[18];
+
+	Bit8u reg104;
+	Bit8u reg08;
+	Bit8u reg04;
+	Bit8u regBD;
+	Bit8u vibratoIndex;
+	Bit8u tremoloIndex;
+	Bit8s vibratoSign;
+	Bit8u vibratoShift;
+	Bit8u tremoloValue;
+	Bit8u vibratoStrength;
+	Bit8u tremoloStrength;
+	//Mask for allowed wave forms
+	Bit8u waveFormMask;
+	//0 or -1 when enabled
+	Bit8s opl3Active;
+
+};
+
+/*
+struct Handler : public Adlib::Handler {
+	DBOPL::Chip chip;
+	virtual Bit32u WriteAddr( Bit32u port, Bit8u val );
+	virtual void WriteReg( Bit32u addr, Bit8u val );
+	virtual void Generate( MixerChannel* chan, Bitu samples );
+	virtual void Init( Bitu rate );
+};
+*/
+
+
+void Chip__Setup(Chip *self, Bit32u rate );
+void DBOPL_InitTables( void );
+void Chip__Chip(Chip *self);
+void Chip__WriteReg(Chip *self, Bit32u reg, Bit8u val );
+void Chip__GenerateBlock2(Chip *self, Bitu total, Bit32s* output );
+
+// haleyjd 09/09/10: Not standard C.
+#ifdef _MSC_VER
+#define inline __inline
+#endif