psDooM is a process monitor and manager for *nix systems.
It could be considered a graphical interface to the 'ps', 'renice', and
'kill' commands.
psDooM is based on XDoom, which is based on id Software's 'Doom'.
This project started out as a proof-of-concept program for the web page
"Doom as a tool for system administration" at
http://www.cs.unm.edu/~dlchao/flake/doom by Dennis Chao at the University
of New Mexico. Dennis took the GPL'd sources of XDoom and added code so
that processes running on the system would be instantiated as monsters,
and wounding and killing them corresponds to renicing and killing the
processes.
I (David Koppenhofer) loved the idea of combining two of my favorite
computer subjects (Linux and Doom). Therefore, I began to enhance and
customize the program.
Goals of this project include:
1) Add even more functionality to the process manager such as the ability
to send various kill signals and a way to shut down the machine
_cleanly_ from the program.
2) Add networking support so multiple admins can work the machine at the
same time and/or remotely administer a machine.
3) Everything else in the TODO file.
4) Possibly make other interfaces besides one to 'ps', such as a file
management module.
5) Make psDooM the de-facto standard for graphical process manipulation
on the *nix platform. :-)
------------------------------------------------------------------------
Supported Platforms
------------------------------------------------------------------------
psDooM has been tested on the following platforms:
Linux x86 2.0.x, X11, and [S]VGA
Solaris SPARC 2.6, X11
psDooM can probably be made to work on any version of UNIX which runs
XDoom. It uses several system commands in order to do its work: 'ps',
'renice', and 'kill'. Formats of the commands _must_ be as follows:
*** LINUX 'ps' ***
ps h a x u OT == no header, list other user's processes, list processes
without a controlling terminal, in 'user format',
sorted by process start time. example output follows:
root 1 0.0 0.9 764 388 ? S 18:39 0:01 init
root 2 0.0 0.0 0 0 ? SW 18:39 0:00 (kflushd)
root 3 0.0 0.0 0 0 ? SW< 18:39 0:00 (kswapd)
root 28 0.0 0.8 736 348 ? S 18:39 0:00 /sbin/kerneld
root 143 0.0 1.2 816 472 ? S 18:39 0:00 syslogd
root 152 0.0 1.3 896 528 ? S 18:39 0:00 klogd
daemon 163 0.0 1.0 784 404 ? S 18:39 0:00 /usr/sbin/atd
david 218 0.0 2.1 1280 856 1 S 18:39 0:00 -bash
root 221 0.0 0.7 724 296 4 S 18:39 0:00 /sbin/mingetty tty4
david 598 0.0 1.2 844 472 2 R 22:14 0:00 ps h a x u OT
*** SOLARIS 'ps' ***
/usr/bin/ps -A -o user= -o pid= -o tty= -o comm=
list all processes, show username, show process id, show terminal,
show user's command, suppress headers. example output follows:
root 1 ? init
root 28 ? /sbin/kerneld
root 2 ? (kflushd)
root 3 ? (kswapd)
root 152 ? klogd
root 143 ? syslogd
daemon 163 ? /usr/sbin/atd
david 598 2 ps
david 218 1 -bash
root 221 4 /sbin/mingetty
renice +5 <pid> == renices process number <pid> to +5 priority.
kill -9 <pid> == sends a SIGKILL to process number <pid>.
------------------------------------------------------------------------
Obtaining the Source
------------------------------------------------------------------------
The latest version of psDooM can be found on the homepage at:
http://psdoom.sourceforge.net/
------------------------------------------------------------------------
Problem Reports
------------------------------------------------------------------------
If you find a problem with psDooM, you can e-mail me at
djk@users.sourceforge.net. You could also go to the psDooM SourceForge
Project Page at http://sourceforge.net/project/?group_id=3418
and use the facilities there (like 'bug report', 'support request', etc).
However, please be sure that it is a psDooM problem rather than an XDoom
issue. The easiest way to tell the difference is to run XDoom with the
same level and options (if at all possible). If the problem occurs there
as well, it's XDoom's fault, not psDooM's. Obviously, if the problem
involves any of the psDooM-specific command line flags or 'pid monsters',
it is a psDooM-related issue. :-) I cannot guarantee that I can solve
your problem. I'm doing this in my spare time for the fun of it; this
software is provided on AS IS basis.
------------------------------------------------------------------------
Building psDooM from Source
------------------------------------------------------------------------
If you're reading this file from the binary distribution, you don't need
to know how to build psDooM from source. Go on to the next section. :-)
If you're intrested in building psDooM from source and you're reading
this file, you've either untarred the psDooM sources or have successfully
applied the psDooM patch to XDoom.
See Udo's "INSTALL" file in ../xdoomsrc/doc for details on building from
here on.
Changes to the XDoom code are generally denoted by '*** PID BEGIN ***'
and '*** PID END ***' in the source files. The files pr_process.c and
pr_process.h are new files for psDooM.
------------------------------------------------------------------------
Executing psDooM
------------------------------------------------------------------------
NOTE: Throughout the explanation, I'll refer to the program as 'psDooM',
even though the executable you actually run will likely be called
something else (like ps-sxdoom).
If you can run XDoom, you're well on your way to running psDooM.
Be sure to see the XDoom docs (and other Doom-related material) in
../xdoomsrc/doc/ (or ../xdoomdoc/ if you're using the binary
distribution), as it applies to psDooM also, with a few cavaets:
* I have yet to test demo recording compatability with XDoom and other
Doom ports.
* Save games aren't compatable with XDoom (and other ports, I imagine).
* Netgames won't work on levels that have pid monsters in them, due to
consistancy check errors. Netgames on levels without pid monsters
should work, but this is untested as well.
* psDooM is installed into the directory /usr/local/games/psdoom rather
than /usr/local/games/xdoom. Shell scripts are still installed in
/usr/local/bin.
* psDooM looks for its default configuration files (.doomrc, .xdlaunchrc)
and savegame files (doomsav?.dsg) in ~/.psdoom rather than in ~/.xdoom.
Now, with those out of the way, we can get to the good stuff. :-)
psDooM can monitor processes with shareware Doom 1, registered Doom 1,
Ultimate Doom, or Doom 2. 'Plutonia Experiment' and 'TNT - Evilution'
will run, but no process monitoring will be done.
The first level (either E1M1 or MAP01), and only the first level, will
contain monsters that represent processes currently running on the machine
('pid monsters'). The machine's process list is checked at regular
intervals. Processes that are new since the last check are spawned as new
monsters, while processes no longer running on the machine are removed
from the level. Process monitoring is not done if playing on a level
other than the first one or while recording/playing a demo.
A 'pid monster' is identified by the text 'floating' in front of it. This
text denotes its process id number and the last 7 characters of the
process name. The text is not shown if the monster is too far away from
the player or too close to the edge of the screen.
Wounding a 'pid monster' corresponds to executing a 'renice +5' on the
associated process. Killing a 'pid monster' sends a 'kill -9' to the
associated process. Since the renice and kill actions are done by a
system call, they are governed by the permissions of the user running
psDooM. For example, if a normal user, 'jschmoe', kills a 'pid monster'
whose real process is owned by 'jdoe', nothing would happen to the
underlying process on the machine because jschmoe doesn't have the rights
to alter jdoe's processes. The 'pid monster' that jschmoe killed will be
resurrected in psDooM during the next process check. The resurrection
denotes that the process on the machine never really went away; its Doom
representation was only temporarily stopped from moving around.
In the original implementation of the program, 'pid monsters' could be
killed not only by the program's user, but also by other 'pid monsters'
and normal Doom monsters on the level. The reasoning behind this behavior
was that "on very heavily-loaded machines, it is not uncommon for the
OS to kill random processes." Unfortunately, the number of monsters
in a given area must be depressingly small in order for them to avoid both
intentional infighting and friendly fire. Since monsters would tend to
kill each other off until only a few remained in the area, the user was
severely hampered in the ability to orderly control processes on the
machine. Therefore, the default behavior of psDooM is to ensure the
player is the only character in the game who can wound and kill 'pid
monsters'. This avoids accidental process deaths from monster infighting.
Unfortunately, it doesn't prevent accidental process deaths from a user's
poor aim. ;-} The original behavior of 'pid monsters' being as vunerable
as other monsters may be enabled with the command line flag:
-nopssafety
Causes the 'pid monsters' to not be protected against damage from each
other, normal Doom monsters, and the environment. Normally, only the
player may inflict damage on 'pid monsters'.
Which processes are represented by default depends on whether you're
running psDooM as the root user or not. If you are root, then all
processes are shown. Normal users see only their own processes by
default. The current username is determined by looking at the environment
variables PSDOOMUSER, LOGNAME, USER, and USERNAME (in that order).
Changing these variables will _not_ change the permissions of your
username with regard to process renicing and killing; they're just used to
determine username for the 'userlist'-related options. The default
'userlist' behavior may be nullified by giving some command line arguments
to psDooM.
NOTE: specifying _any_ of these options will cause psDooM to ignore the
default settings for the current username. The list of users whose
processes to show will start out empty.
-psallusers
Effectively adds every username to the list of users whose processes
to show.
-psuser [username [username]...]
Adds username(s) to the list of users whose processes to show. If no
username is specified, the current username (as determined by the
environment variables listed above) is added to this list.
-psnotuser [username [username]...]
Adds username(s) to the list of users whose processes NOT to show. If
no username is specified, the current username (as determined by the
environment variables listed above) is added to this list.
Examples of 'userlist' command line flags:
%ps-xdoom -psallusers
This command will show every user's processes.
%ps-xdoom -psallusers -psuser jschmoe jdoe
The '-psuser jschmoe jdoe' is extraneous here; users jschmoe and jdoe
are included in '-psallusers'.
%ps-xdoom -psallusers -psnotuser
This will show everybody's processes except your own. Remember, your
username is determined automatically by psDooM according to what
PSDOOMUSER, LOGNAME, USER, or USERNAME is set to in the environment.
%ps-xdoom -psnotuser jdoe
This will show no processes, even if you're running psDooM as root.
Remember, specifying any 'userlist' command line option causes the
defaults to not be used; the list of users whose processes to show
starts out empty.
The 'pid monster' locations depend on what version of Doom you're using
and whether you have the custom process management levels (available on
the psDooM web site).
If you have registered Doom 1, Ultimite Doom, or Doom 2, you can use a
custom level designed for process management. There is one level designed
for Doom 1 (psdoom1.wad) and another designed for Doom 2 (psdoom2.wad).
If those files are present (or linked to) in the program's directory and
have the correct name (as given above), the level will automatically load
as E1M1 or MAP01, unless suppressed with the command line flag:
-nopslev
Suppresses the automatic loading of the custom level psdoom*.wad and
makes psDooM assume pid monster coordinates for the stock E1M1 or
MAP01. It has no effect if you don't have the custom level or if
you're using shareware Doom 1.
NOTE: The command 'ps-xdoom -nopslev -file psdoom1.wad' will not work for
process management. While the custom level will be loaded, psDooM would
assume E1M1 coordinates for the 'pid monster' placement. The E1M1
coordinates do not correlate to anywhere meaningful on the psdoom*.wad
maps.
Locations of the 'pid monsters' within the levels are as follows:
For shareware Doom 1, and registered Doom 1 or Ultimite Doom without the
custom level:
psDooM spawns the 'pid monsters' in the 'hidden' courtyard on E1M1.
To get there, go through the room with the zig-zag floor with poison
around it and open the miscolored wall on the right, before the door to
leave that room.
For Doom 2 without the custom level:
psDooM spawns the 'pid monsters' in the 'hidden' courtyard on MAP01.
To get there, activate the switch to (and get on) the lift in the room
before the exit. Then, once the lift raises, activate the rear wall and
walk into that secret alcove. When you leave the lift, a door to the
courtyard will have opened on the right side of the room, past the
window on the right.
For the custom levels:
psDooM spawns you in a room with equiptment and weapons. The switch
ahead of you exits the level, and the three doors take you to rooms
containing 'pid monsters'.
There are several other command line flags that affect how psDooM runs:
-nopsmon
Disables process monitoring entirely. Nice if you want to play an E1M1
or MAP01 level that isn't set up for process monitoring.
-nopsact
Disables the system calls to 'renice' and 'kill' when 'pid monsters'
are wounded and killed. This is good if you only want to monitor
processes, not manage them.
-nomonsters.
Yes, there is a period at the end of this command. It does the same
thing as the '-nomonsters' flag, but is persistant across new games and
level warps.
NOTE: 'pid monsters' are NOT affected by the '-nomonsters' and
'-nomonsters.' flags; use -nopsmon to turn them off instead.
-respawnitems
Like you think it may work, this flag causes items to respawn as they
do in '-altdeath' games (Invun, Invis, and dropped items don't
respawn; everything else does). This flag has no effect when recording
or playing a demo because it messes up timing.
The XDoom distribution includes a graphical front-end to xdoom, called
xdlaunch. It allows the user to specify XDoom command line flags by
clicking option boxes and using dropdown lists. This utility has been
renamed to ps-xdlaunch and modified to run psDooM. Also, a place in the
front-end was added so a user can manually type additional command line
flags to pass to ps-xdoom. psDooM-specific options can be shown by
pressing a button in ps-xdlaunch. This utility requires TCL/TK.
