fixes #145

A much more elegant way to get the screen size.

README.md

@@ -1,45 +1,74 @@
-# Raspberry Pi Ad Blocker 
+# Automated Install 
-**A black hole for ads, hence Pi-hole**
+#### Designed For Raspberry Pi B, B+, 2,
-
+##### and Zero (with an Ethernet adapter)
-![Pi-hole](http://i.imgur.com/wd5ltCU.png)
-
-The Pi-hole is a DNS/Web server that will **block ads for any device on your network**.
-
-## Coverage
-Featured on [MakeUseOf](http://www.makeuseof.com/tag/adblock-everywhere-raspberry-pi-hole-way/) and [Lifehacker](http://lifehacker.com/turn-a-raspberry-pi-into-an-ad-blocker-with-a-single-co-1686093533)!
-
-## Automated Install
 
 1. Install Raspbian 
-2. Set a **static** IP address
+2. Run the command below
-3. Run the command below
 
-```curl -s "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/basic-install.sh" | bash```
+### ```curl -L install.pi-hole.net | bash```
+
+![Pi-hole automated installation](http://i.imgur.com/Un7lBlj.png)
 
 Once installed, **configure any device to use the Raspberry Pi as its DNS server and the ads will be blocked**.  You can also configure your router's DHCP options to assign the Pi as clients DNS server so they do not need to do it manually.  
 
-A more detailed explanation of the installation can be found [here](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
-
 [![Donate](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif "AdminLTE Presentation")](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY "Donate")
 
+# How Does It Work?
+**Watch the 60-second video below to get a quick overview**
+
+[![Pi-hole exlplained](http://i.imgur.com/wd5ltCU.png)](https://vimeo.com/135965232)
+
+## Video Coverage
+
+### TekThing
+
+Pi-hole is mentioned at the two minute mark
+
+[![Pi-hole on TekThing](http://img.youtube.com/vi/8Co59HU2gY0/0.jpg)](https://youtu.be/8Co59HU2gY0?t=2m)
+
+### Security Now! Podcast
+Pi-hole is mentioned at 100 minutes and 26 seconds (the link brings you right there)
+[![Pi-hole on Security Now!](http://img.youtube.com/vi/p7-osq_y8i8/0.jpg)](http://www.youtube.com/watch?v=p7-osq_y8i8&t=100m26s)
+
+### Tech Blogs
+
+Pi-hole has been written about on:
+
+- [Medium](https://medium.com/@robleathern/block-ads-on-all-home-devices-for-53-18-a5f1ec139693#.gj1xpgr5d)
+- [MakeUseOf](http://www.makeuseof.com/tag/adblock-everywhere-raspberry-pi-hole-way/)
+- [Lifehacker](http://lifehacker.com/turn-a-raspberry-pi-into-an-ad-blocker-with-a-single-co-1686093533)!
+
+## Partnering With Optimal.com
+
+Pi-hole will be teaming up with [Rob Leathern's subscription service to avoid ads](https://medium.com/@robleathern/block-ads-on-all-home-devices-for-53-18-a5f1ec139693#.gj1xpgr5d).  This service is unique and will help content-creators and publishers [still make money from visitors who are using an ad ablocker](http://techcrunch.com/2015/12/17/the-new-optimal/).
+
+
+## Technical Details
+
+A more detailed explanation of the installation can be found [here](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
+
 ## Gravity
-The [gravity.sh](https://github.com/jacobsalmela/pi-hole/blob/master/gravity.sh) does most of the magic.  The script pulls in ad domains from many sources and compiles them into a single list of [over 900,000 entries](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
+The [gravity.sh](https://github.com/jacobsalmela/pi-hole/blob/master/gravity.sh) does most of the magic.  The script pulls in ad domains from many sources and compiles them into a single list of [over 1.6 million entries](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
 
 ## Whitelist and blacklist
 You can add a `whitelist.txt` or `blacklist.txt` in `/etc/pihole/` and the script will apply those files automatically.
 
 ## Web Interface
-I am also working on a [Web interface](https://github.com/jacobsalmela/AdminLTE#pi-hole-admin-dashboard) so you can view stats and change settings.
+The [Web interface](https://github.com/jacobsalmela/AdminLTE#pi-hole-admin-dashboard) will be installed automatically so you can view stats and change settings.  You can find it at:
+
+`http://192.168.1.x/admin/index.php`
+
+![Web](http://i.imgur.com/m114SCn.png)
 
 ##  Custom Config File
 If you want to use your own variables for the gravity script (i.e. storing the files in a different location) and don't want to have to change them every time there is an update to the script, create a file called `/etc/pihole/pihole.conf`. In it, you should add your own variables in a similar fashion as shown below:
 
 ```
-origin=/var/run/pihole
+piholeDir=/var/run/pihole
 adList=/etc/dnsmasq.d/adList
 ```
 
-See [this PR](https://github.com/jacobsalmela/pi-hole/pull/20) for more details.
+See the [Wiki](https://github.com/jacobsalmela/pi-hole/wiki/Customization) entry for more details.
 
 ### How It Works
 A technical and detailed description can be found [here](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0)!
@@ -47,4 +76,9 @@ A technical and detailed description can be found [here](http://jacobsalmela.com
 ## Other Operating Systems
 This script will work for other UNIX-like systems with some slight **modifications**.  As long as you can install `dnsmasq` and a Webserver, it should work OK.  The automated install only works for a clean install of Raspiban right now since that is how the project originated.
 
+### Examples Of The Pi-hole On Other Operating Systems
+- [Sky-Hole](http://dlaa.me/blog/post/skyhole)
+- [Pi-hole in the Cloud!](http://blog.codybunch.com/2015/07/28/Pi-Hole-in-the-cloud/)
+- [unRaid-hole](https://github.com/spants/unraidtemplates/blob/master/Spants/unRaid-hole.xml#L13)--[Repo and more info](http://lime-technology.com/forum/index.php?PHPSESSID=c0eae3e5ef7e521f7866034a3336489d&topic=38486.0)
+
 [![Donate](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif "AdminLTE Presentation")](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY "Donate")

advanced/Scripts/chronometer.sh

@@ -1,6 +1,13 @@
-#!/bin/bash
+#!/usr/bin/env bash
 # Displays Pi-hole stats on the Adafruit PiTFT 2.8" touch screen
 # Set the pi user to log in automatically and run this script from /etc/profile
+# (c) 2015 by Jacob Salmela
+# This file is part of Pi-hole.
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
 for (( ; ; ))
 do
 	clear

advanced/Scripts/piholeLogFlush.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+# Flushes /var/log/pihole.log
+# (c) 2015 by Jacob Salmela
+# This file is part of Pi-hole.
+#
+#Pi-hole is free software: you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation, either version 2 of the License, or
+#(at your option) any later version.
+
+truncate -s 0 /var/log/pihole.log

advanced/Scripts/whitelist.sh

@@ -1,13 +1,57 @@
-#!/bin/bash
+#!/usr/bin/env bash
+# (c) 2015 by Jacob Salmela
+# This file is part of Pi-hole.
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+whitelist=/etc/pihole/whitelist.txt
+adList=/etc/pihole/gravity.list
+if [[ ! -f $whitelist ]];then
+    touch $whitelist
+fi
+
+if [[ $# = 0 ]]; then
+    echo "Immediately whitelists one or more domains."
+    echo "Usage: whitelist.sh domain1 [domain2 ...]"
+fi
+
+combopattern=""
+
 # For each argument passed to this script
 for var in "$@"
 do
   echo "Whitelisting $var..."
-        # Use sed to search for the domain in /etc/pihole/gravity.list and remove it using an in-place edit
+
-        sed -i "/$var/d" /etc/pihole/gravity.list
+  # Construct basic pattern to match domain name.
-        # Also add the domain to the whitelist.txt in /etc/pihole
+  basicpattern=$(echo $var | awk -F '[# \t]' 'NF>0&&$1!="" {print ""$1""}' | sed 's/\./\\./g')
-        echo "$var" >> /etc/pihole/whitelist.txt
+
+  if [[ "$basicpattern" != "" ]]; then
+    # Add to the combination pattern that will be used below
+    if [[ "$combopattern" != "" ]]; then combopattern="$combopattern|"; fi
+    combopattern="$combopattern$basicpattern"
+
+    # Also add the domain to the whitelist but only if it's not already present
+    grep -E -q "^$basicpattern$" $whitelist \
+    || echo "$var" >> $whitelist
+  fi
 done
-echo "** $# domain(s) whitelisted."
+
-# Force dnsmasq to reload /etc/pihole/gravity.list
+# Now report on and remove matched domains
-kill -HUP $(pidof dnsmasq)
+if [[ "$combopattern" != "" ]]; then
+  echo "Modifying hosts file..."
+
+  # Construct pattern to match entry in hosts file.
+  # This consists of one or more IP addresses followed by the domain name.
+  pattern=$(echo $combopattern | awk -F '[# \t]' '{printf "%s", "^(([0-9]+\.){3}[0-9]+ +)+("$1")$"}')
+
+  # Output what will be removed and then actually remove
+  sed -r -n 's/'"$pattern"'/  Removed: \3/p' $adList
+  sed -r -i '/'"$pattern"'/d' $adList
+
+  echo "** $# domain(s) whitelisted."
+  # Force dnsmasq to reload /etc/pihole/gravity.list
+  kill -HUP $(pidof dnsmasq)
+fi

advanced/dnsmasq.conf

@@ -1,12 +1,50 @@
+# If you want dnsmasq to read another file, as well as /etc/hosts, use
+# this.
 addn-hosts=/etc/pihole/gravity.list
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# unnecessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link unnecessarily.
+
+# Never forward plain names (without a dot or domain part)
 domain-needed
+# Never forward addresses in the non-routed address spaces.
 bogus-priv
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this.
 no-resolv
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
 server=8.8.8.8
 server=8.8.4.4
-interface=eth0
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+interface=@INT@
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
 listen-address=127.0.0.1
+
+# Set the cachesize here.
 cache-size=10000
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
 log-queries
 log-facility=/var/log/pihole.log
+
+# Normally responses which come from /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
 local-ttl=300
+
+# This allows it to continue functioning without being blocked by syslog, and allows syslog to use dnsmasq for DNS queries without risking deadlock
+log-async

advanced/dphys-swapfile

@@ -0,0 +1 @@
+CONF_SWAPSIZE=500

advanced/lighttpd.conf

@@ -1,17 +1,23 @@
 server.modules = (
+	"mod_access",
+	"mod_accesslog",
 	"mod_expire",
 	"mod_compress",
  	"mod_redirect",
+	"mod_setenv",
 	"mod_rewrite"
 )
 
-server.document-root        = "/var/www"
+server.document-root        = "/var/www/html"
+server.error-handler-404	= "pihole/index.html"
 server.upload-dirs          = ( "/var/cache/lighttpd/uploads" )
 server.errorlog             = "/var/log/lighttpd/error.log"
 server.pid-file             = "/var/run/lighttpd.pid"
 server.username             = "www-data"
 server.groupname            = "www-data"
 server.port                 = 80
+accesslog.filename			= "/var/log/lighttpd/access.log"
+accesslog.format			= "%{%s}t|%V|%r|%s|%b"
 
 
 index-file.names            = ( "index.php", "index.html", "index.lighttpd.html" )
@@ -26,13 +32,20 @@ include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port
 include_shell "/usr/share/lighttpd/create-mime.assign.pl"
 include_shell "/usr/share/lighttpd/include-conf-enabled.pl"
 
-# Set access to 1 day for better query performance when the list gets so large
+# If the URL starts with /admin, it is the Web interface
-# http://jacobsalmela.com/raspberry-pi-block-ads-adtrap/#comment-2013820434
+$HTTP["url"] =~ "^/admin/" {
-$HTTP["url"] =~ "^/pihole/" {
+	# Create a response header for debugging using curl -I
-        expire.url = ("" => "access plus 1 days")
+	setenv.add-response-header = ( "X-Pi-hole" => "The Pi-hole Web interface is working!" )
 }
 
-# Rewrites all URLs to the /var/www/pihole/index.html
+# If the URL does not start with /admin, then it is a query for an ad domain
-$HTTP["host"] =~ ".*" {
+$HTTP["url"] =~ "^(?!/admin)/.*" {
-     url.rewrite = (".*" => "pihole/index.html")
+	# Create a response header for debugging using curl -I
+	setenv.add-response-header = ( "X-Pi-hole" => "A black hole for Internet advertisements." )
+
+	# Set the cache to 1 day for better performance
+	expire.url = ("" => "access plus 1 days")
+
+	# Send the query into the black hole
+	url.rewrite = (".*" => "pihole/index.html" )
 }

advanced/pihole.cron

@@ -0,0 +1,26 @@
+# /etc/crontab: system-wide crontab
+# Unlike any other crontab you don't have to run the `crontab'
+# command to install the new version when you edit this file
+# and files in /etc/cron.d. These files also have username fields,
+# that none of the other crontabs do.
+
+SHELL=/bin/sh
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+
+# m h dom mon dow user  command
+17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
+25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
+47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
+52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
+
+# Pi-hole: Update the ad sources once a week on Sunday at 01:59
+#          Download any updates from the ad lists
+59 1    * * 7   root    /usr/local/bin/gravity.sh
+
+# Pi-hole: Parse the log file before it is flushed and save the stats to a database
+#          This will be used for a historical view of your Pi-hole's performance
+#50 11  * * *   root    /usr/local/bin/dailyLog.sh
+
+# Pi-hole: Flush the log daily at 11:58 so it doesn't get out of control
+#          Stats will be viewable in the Web interface thanks to the cron job above
+58 11   * * *   root    /usr/local/bin/piholeLogFlush.sh

automated install/basic-install.sh

@@ -1,77 +1,325 @@
-#!/bin/bash
+#!/usr/bin/env bash
-# Pi-hole automated install
+# Pi-hole: A black hole for Internet advertisements
-# Raspberry Pi Ad-blocker
+# by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
 #
-# Install with this command (from the Pi):
+# (c) 2015 by Jacob Salmela
+# This file is part of Pi-hole.
 #
-# curl -s "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/basic-install.sh" | bash
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+# pi-hole.net/donate
 #
-# Or run the commands below in order
+# Install with this command (from your Pi):
+#
+# curl -L install.pi-hole.net | bash
 
-clear
+######## VARIABLES #########
-echo "  _____ _        _           _      "
+tmpLog=/tmp/pihole-install.log
-echo " |  __ (_)      | |         | |     "
+instalLogLoc=/etc/pihole/install.log
-echo " | |__) |   __  | |__   ___ | | ___ "
-echo " |  ___/ | |__| | '_ \ / _ \| |/ _ \ "
-echo " | |   | |      | | | | (_) | |  __/ "
-echo " |_|   |_|      |_| |_|\___/|_|\___| "
-echo "                                    "
-echo "      Raspberry Pi Ad-blocker       "
-echo "									  "
-echo "Set a static IP before running this!"
-echo "			             			  "
-echo "	    Press Enter when ready        "
-echo "									  "
-read
 
+# Find the rows and columns
+rows=$(tput lines)
+columns=$(tput cols)
+
+# Divide by two so the dialogs take up half of the screen, which looks nice.
+r=$(( rows / 2 ))
+c=$(( columns / 2 ))
+
+# Find IP used to route to outside world
+IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}')
+IPv4addr=$(ip -o -f inet addr show dev $IPv4dev | awk '{print $4}' | awk 'END {print}')
+IPv4gw=$(ip route get 8.8.8.8 | awk '{print $3}')
+
+availableInterfaces=$(ip -o link | awk '{print $2}' | grep -v "lo" | cut -d':' -f1)
+dhcpcdFile=/etc/dhcpcd.conf
+
+####### FUCNTIONS ##########
+backupLegacyPihole()
+{
 if [[ -f /etc/dnsmasq.d/adList.conf ]];then
-	echo "Original Pi-hole detected.  Initiating sub space transport..."
+	echo "Original Pi-hole detected.  Initiating sub space transport"
 	sudo mkdir -p /etc/pihole/original/
-	mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
+	sudo mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
-	mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
+	sudo mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
-	mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
+	sudo mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
-	mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
+	sudo mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
-	mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
+	sudo mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
-	mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
+	sudo mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
 else
 	:
 fi
+}
 
-echo "Updating the Pi..."
+welcomeDialogs()
-sudo apt-get update
+{
-sudo apt-get -y upgrade
+# Display the welcome dialog
+whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
 
-echo "Installing DNS..."
+# Support for a part-time dev
-sudo apt-get -y install dnsmasq
+whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations:  http://pi-hole.net/donate" $r $c
-sudo update-rc.d dnsmasq enable
 
-echo "Installing a Web server"
+# Explain the need for a static address
-sudo apt-get -y install lighttpd
+whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
-sudo chown www-data:www-data /var/www
-sudo chmod 775 /var/www
-sudo usermod -a -G www-data pi
 
-echo "Stopping services to modify them..."
+In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
-sudo service dnsmasq stop
+}
-sudo service lighttpd stop
 
-echo "Backing up original config files and downloading Pi-hole ones..."
+chooseInterface()
+{
+# Turn the available interfaces into an array so it can be used with a whiptail dialog
+interfacesArray=()
+firstloop=1
+
+while read -r line
+do
+mode="OFF"
+if [[ $firstloop -eq 1 ]]; then
+  firstloop=0
+  mode="ON"
+fi
+interfacesArray+=("$line" "available" "$mode")
+done <<< "$availableInterfaces"
+
+# Find out how many interfaces are available to choose from
+interfaceCount=$(echo "$availableInterfaces" | wc -l)
+chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount)
+chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty)
+for desiredInterface in $chooseInterfaceOptions
+do
+	piholeInterface=$desiredInterface
+	echo "Using interface: $piholeInterface"
+	echo ${piholeInterface} > /tmp/piholeINT
+done
+}
+
+use4andor6()
+{
+# Let use select IPv4 and/or IPv6
+cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
+options=(IPv4 "Block ads over IPv4" on
+         IPv6 "Block ads over IPv6" off)
+choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
+for choice in $choices
+do
+    case $choice in
+        IPv4)
+            echo "IPv4 selected."
+			useIPv4=true
+            ;;
+        IPv6)
+			echo "IPv6 selected."
+			useIPv6=true
+            ;;
+    esac
+done
+}
+
+useIPv6dialog()
+{
+piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
+whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." $r $c
+sudo mkdir -p /etc/pihole/
+sudo touch /etc/pihole/.useIPv6
+}
+
+getStaticIPv4Settings()
+{
+# Ask if the user wannts to use DHCP settings as their static IP
+if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
+
+								IP address:    $IPv4addr
+								Gateway:       $IPv4gw" $r $c) then
+	# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
+	whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
+
+	If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
+
+	It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
+	# Nothing else to do since the variables are already set above
+else
+	# Otherwise, we need to ask the user to input their desired settings.
+	# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
+	# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
+	until [[ $ipSettingsCorrect = True ]]
+	do
+	# Ask for the IPv4 address
+	IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
+	if [[ $? = 0 ]];then
+    	echo "Your static IPv4 address:    $IPv4addr"
+		# Ask for the gateway
+			IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
+			if [[ $? = 0 ]];then
+				echo "Your static IPv4 gateway:    $IPv4gw"
+				# Give the user a chance to review their settings before moving on
+				if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
+					IP address:    $IPv4addr
+					Gateway:       $IPv4gw" $r $c)then
+					# If the settings are correct, then we need to set the piholeIP
+					# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
+					echo ${IPv4addr%/*} > /tmp/piholeIP
+					echo $piholeInterface > /tmp/piholeINT
+					# After that's done, the loop ends and we move on
+					ipSettingsCorrect=True
+				else
+					# If the settings are wrong, the loop continues
+					ipSettingsCorrect=False
+				fi
+			else
+				# Cancelling gateway settings window
+				ipSettingsCorrect=False
+				echo "User canceled."
+				exit
+			fi
+		else
+		# Cancelling IPv4 settings window
+		ipSettingsCorrect=False
+		echo "User canceled."
+		exit
+	fi
+done
+# End the if statement for DHCP vs. static
+fi
+}
+
+setDHCPCD(){
+# Append these lines to dhcpcd.conf to enable a static IP
+echo "interface $piholeInterface
+static ip_address=$IPv4addr
+static routers=$IPv4gw
+static domain_name_servers=$IPv4gw" | sudo tee -a $dhcpcdFile >/dev/null
+}
+
+setStaticIPv4(){
+if grep -q $IPv4addr $dhcpcdFile; then
+	# address already set, noop
+	:
+else
+	setDHCPCD
+	sudo ip addr replace dev $piholeInterface $IPv4addr
+	echo "Setting IP to $IPv4addr.  You may need to restart after the install is complete."
+fi
+}
+
+installScripts(){
+sudo curl -o /usr/local/bin/gravity.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh
+sudo curl -o /usr/local/bin/chronometer.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh
+sudo curl -o /usr/local/bin/whitelist.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/whitelist.sh
+sudo curl -o /usr/local/bin/piholeLogFlush.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/piholeLogFlush.sh
+sudo chmod 755 /usr/local/bin/{gravity,chronometer,whitelist,piholeLogFlush}.sh
+}
+
+installConfigs(){
 sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
 sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
-sudo mv /var/www/index.lighttpd.html /var/www/index.lighttpd.orig
+sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf
-sudo curl -o /etc/dnsmasq.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf"
+sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf
-sudo curl -o /etc/lighttpd/lighttpd.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf"
+sudo sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.conf
-sudo mkdir /var/www/pihole
+}
-sudo curl -o /var/www/pihole/index.html "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html"
 
-echo "Locating the Pi-hole..."
+stopServices(){
-sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh"
+sudo service dnsmasq stop || true
-sudo curl -o /usr/local/bin/chronometer.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh"
+sudo service lighttpd stop || true
-sudo chmod 755 /usr/local/bin/gravity.sh
+}
-sudo chmod 755 /usr/local/bin/chronometer.sh
 
-echo "Entering the event horizon..."
+installDependencies(){
+sudo apt-get update
+sudo apt-get -y upgrade
+sudo apt-get -y install dnsutils bc toilet
+sudo apt-get -y install dnsmasq
+sudo apt-get -y install lighttpd php5-common php5-cgi php5
+}
+
+installWebAdmin(){
+sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip
+sudo unzip -oq /var/www/master.zip -d /var/www/html/
+sudo mv /var/www/html/AdminLTE-master /var/www/html/admin
+sudo rm /var/www/master.zip 2>/dev/null
+sudo touch /var/log/pihole.log
+sudo chmod 644 /var/log/pihole.log
+sudo chown dnsmasq:root /var/log/pihole.log
+}
+
+installPiholeWeb(){
+sudo mkdir /var/www/html/pihole
+sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
+sudo curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html
+}
+
+installCron(){
+sudo mv /etc/crontab /etc/crontab.orig
+sudo curl -o /etc/crontab https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/pihole.cron
+}
+
+installPihole()
+{
+installDependencies
+stopServices
+sudo chown www-data:www-data /var/www/html
+sudo chmod 775 /var/www/html
+sudo usermod -a -G www-data pi
+sudo lighty-enable-mod fastcgi fastcgi-php
+installScripts
+installConfigs
+installWebAdmin
+installPiholeWeb
+installCron
 sudo /usr/local/bin/gravity.sh
+}
 
-echo "Restarting..."
+displayFinalMessage(){
-sudo shutdown -r now
+	whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
+
+						$IPv4addr
+						$piholeIPv6
+
+If you set a new IP address, you should restart the Pi.
+
+The install log is in /etc/pihole." $r $c
+}
+
+######## SCRIPT ############
+# Start the installer
+welcomeDialogs
+
+# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
+backupLegacyPihole
+
+# Find interfaces and let the user choose one
+chooseInterface
+
+# Let the user decide if they want to block ads over IPv4 and/or IPv6
+use4andor6
+
+# Decide is IPv4 will be used
+if [[ "$useIPv4" = true ]];then
+	echo "Using IPv4"
+	getStaticIPv4Settings
+	setStaticIPv4
+else
+	useIPv4=false
+	echo "IPv4 will NOT be used."
+fi
+
+# Decide is IPv6 will be used
+if [[ "$useIPv6" = true ]];then
+	useIPv6dialog
+	echo "Using IPv6."
+	echo "Your IPv6 address is: $piholeIPv6"
+else
+	useIPv6=false
+	echo "IPv6 will NOT be used."
+fi
+
+# Install and log everything to a file
+installPihole | tee $tmpLog
+
+# Move the log file into /etc/pihole for storage
+sudo mv $tmpLog $instalLogLoc
+
+displayFinalMessage
+
+sudo service dnsmasq start
+sudo service lighttpd start

automated install/uninstall.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+# Completely uninstalls the Pi-hole
+# (c) 2015 by Jacob Salmela
+# This file is part of Pi-hole.
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+
+######### SCRIPT ###########
+sudo apt-get -y remove --purge dnsutils bc toilet
+sudo apt-get -y remove --purge dnsmasq
+sudo apt-get -y remove --purge lighttpd php5-common php5-cgi php5
+sudo rm -rf /var/www/html
+sudo rm /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
+sudo rm /etc/crontab
+sudo mv /etc/crontab.orig /etc/crontab
+sudo rm /etc/dnsmasq.conf
+sudo rm -rf /etc/lighttpd/
+sudo rm /var/log/pihole.log
+sudo rm /usr/local/bin/gravity.sh
+sudo rm /usr/local/bin/chronometer.sh
+sudo rm /usr/local/bin/whitelist.sh
+sudo rm /usr/local/bin/piholeLogFlush.sh
+sudo rm -rf /etc/pihole/

gravity.sh

@@ -1,122 +1,278 @@
-#!/bin/bash
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
 # http://pi-hole.net
 # Compiles a list of ad-serving domains by downloading them from multiple sources
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
 
-# This script should only be run after you have a static IP address set on the Pi
+piholeIPfile=/tmp/piholeIP
-piholeIP=$(hostname -I)
+piholeIPv6file=/etc/pihole/.useIPv6
+if [[ -f $piholeIPfile ]];then
+    # If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
+    piholeIP=$(cat $piholeIPfile)
+    rm $piholeIPfile
+else
+    # Otherwise, the IP address can be taken directly from the machine, which will happen when the script is run by the user and not the installation script
+    IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}')
+    piholeIPCIDR=$(ip -o -f inet addr show dev $IPv4dev | awk '{print $4}' | awk 'END {print}')
+    piholeIP=${piholeIPCIDR%/*}
+fi
+
+if [[ -f $piholeIPv6file ]];then
+    # If the file exists, then the user previously chose to use IPv6 in the automated installer
+    piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
+fi
 
 # Ad-list sources--one per line in single quotes
+# The mahakala source is commented out due to many users having issues with it blocking legitimate domains.
+# Uncomment at your own risk
 sources=('https://adaway.org/hosts.txt'
 'http://adblock.gjtech.net/?format=unix-hosts'
-'http://adblock.mahakala.is/'
+#'http://adblock.mahakala.is/'
-'http://hosts-file.net/.%5Cad_servers.txt'
+'http://hosts-file.net/ad_servers.txt'
 'http://www.malwaredomainlist.com/hostslist/hosts.txt'
 'http://pgl.yoyo.org/adservers/serverlist.php?'
 'http://someonewhocares.org/hosts/hosts'
 'http://winhelp2002.mvps.org/hosts.txt')
 
 # Variables for various stages of downloading and formatting the list
-adList=/etc/pihole/gravity.list
+basename=pihole
-origin=/etc/pihole
+piholeDir=/etc/$basename
-piholeDir=/etc/pihole
+adList=$piholeDir/gravity.list
-if [[ -f $piholeDir/pihole.conf ]];then
+blacklist=$piholeDir/blacklist.txt
+whitelist=$piholeDir/whitelist.txt
+latentWhitelist=$piholeDir/latentWhitelist.txt
+justDomainsExtension=domains
+matter=$basename.0.matter.txt
+andLight=$basename.1.andLight.txt
+supernova=$basename.2.supernova.txt
+eventHorizon=$basename.3.eventHorizon.txt
+accretionDisc=$basename.4.accretionDisc.txt
+eyeOfTheNeedle=$basename.5.wormhole.txt
+
+# After setting defaults, check if there's local overrides
+if [[ -r $piholeDir/pihole.conf ]];then
+    echo "** Local calibration requested..."
         . $piholeDir/pihole.conf
 fi
-justDomainsExtension=domains
-matter=pihole.0.matter.txt
-andLight=pihole.1.andLight.txt
-supernova=pihole.2.supernova.txt
-eventHorizon=pihole.3.eventHorizon.txt
-accretionDisc=pihole.4.accretionDisc.txt
-eyeOfTheNeedle=pihole.5.wormhole.txt
-blacklist=$piholeDir/blacklist.txt
-latentBlacklist=$origin/latentBlacklist.txt
-whitelist=$piholeDir/whitelist.txt
-latentWhitelist=$origin/latentWhitelist.txt
 
-echo "** Neutrino emissions detected..."
+###########################
+# collapse - begin formation of pihole
+function gravity_collapse() {
+	echo "** Neutrino emissions detected..."
 
-# Create the pihole resource directory if it doesn't exist.  Future files will be stored here
+	# Create the pihole resource directory if it doesn't exist.  Future files will be stored here
-if [[ -d $piholeDir ]];then
+	if [[ -d $piholeDir ]];then
-	:
+        # Temporary hack to allow non-root access to pihole directory
-else
+        # Will update later, needed for existing installs, new installs should
+        # create this directory as non-root
+        sudo chmod 777 $piholeDir
+        find "$piholeDir" -type f -exec sudo chmod 666 {} \;
+	else
         echo "** Creating pihole directory..."
-	sudo mkdir $piholeDir
+        mkdir $piholeDir
-fi
+	fi
+}
 
-# Loop through domain list.  Download each one and remove commented lines (lines beginning with '# 'or '/') and blank lines
+# patternCheck - check to see if curl downloaded any new files.
-for ((i = 0; i < "${#sources[@]}"; i++))
+function gravity_patternCheck() {
-do
+	patternBuffer=$1
+	# check if the patternbuffer is a non-zero length file
+	if [[ -s "$patternBuffer" ]];then
+		# Some of the blocklists are copyright, they need to be downloaded
+		# and stored as is. They can be processed for content after they
+		# have been saved.
+		cp $patternBuffer $saveLocation
+		echo "List updated, transport successful..."
+	else
+		# curl didn't download any host files, probably because of the date check
+		echo "No changes detected, transport skipped..."
+	fi
+}
+
+# transport - curl the specified url with any needed command extentions
+function gravity_transport() {
+	url=$1
+	cmd_ext=$2
+	agent=$3
+
+	# tmp file, so we don't have to store the (long!) lists in RAM
+	patternBuffer=$(mktemp)
+	heisenbergCompensator=""
+	if [[ -r $saveLocation ]]; then
+		# if domain has been saved, add file for date check to only download newer
+		heisenbergCompensator="-z $saveLocation"
+	fi
+
+	# Silently curl url
+	curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
+	# Check for list updates
+	gravity_patternCheck $patternBuffer
+
+	# Cleanup
+	rm -f $patternBuffer
+}
+
+# spinup - main gravity function
+function gravity_spinup() {
+
+	# Loop through domain list.  Download each one and remove commented lines (lines beginning with '# 'or '/') and	 		# blank lines
+	for ((i = 0; i < "${#sources[@]}"; i++))
+	do
+        url=${sources[$i]}
         # Get just the domain from the URL
-	domain=$(echo "${sources[$i]}" | cut -d'/' -f3)
+        domain=$(echo "$url" | cut -d'/' -f3)
 
         # Save the file as list.#.domain
-	saveLocation=$origin/"list"."$i"."$domain"
+        saveLocation=$piholeDir/list.$i.$domain.$justDomainsExtension
+        activeDomains[$i]=$saveLocation
 
-	# Use a case statement to download lists that need special cURL commands to complete properly
+        agent="Mozilla/10.0"
+
+        echo -n "  Getting $domain list: "
+
+        # Use a case statement to download lists that need special cURL commands
+        # to complete properly and reset the user agent when required
         case "$domain" in
-		"adblock.mahakala.is") data=$(curl -s -A 'Mozilla/5.0 (X11; Linux x86_64; rv:30.0) Gecko/20100101 Firefox/30.0' -e http://forum.xda-developers.com/ -z $saveLocation."$justDomainsExtension" "${sources[$i]}");;
+                "adblock.mahakala.is")
+                        agent='Mozilla/5.0 (X11; Linux x86_64; rv:30.0) Gecko/20100101 Firefox/30.0'
+                        cmd_ext="-e http://forum.xda-developers.com/"
+                        ;;
 
-		"pgl.yoyo.org") data=$(curl -s -d mimetype=plaintext -d hostformat=hosts -z $saveLocation."$justDomainsExtension" "${sources[$i]}");;
+                "pgl.yoyo.org")
+                        cmd_ext="-d mimetype=plaintext -d hostformat=hosts"
+                        ;;
 
-		*) data=$(curl -s -z $saveLocation."$justDomainsExtension" -A "Mozilla/10.0" "${sources[$i]}");;
+                # Default is a simple request
+                *) cmd_ext=""
         esac
+        gravity_transport $url $cmd_ext $agent
+	done
+}
 
-	if [[ -n "$data" ]];then
+# Schwarzchild - aggregate domains to one list and add blacklisted domains
-		echo "Getting $domain list..."
+function gravity_Schwarzchild() {
+
+	# Find all active domains and compile them into one file and remove CRs
+	echo "** Aggregating list of domains..."
+	truncate -s 0 $piholeDir/$matter
+	for i in "${activeDomains[@]}"
+	do
+   		cat $i |tr -d '\r' >> $piholeDir/$matter
+	done
+}
+
+# Pulsar - White/blacklist application
+function gravity_pulsar() {
+
+	# Append blacklist entries if they exist
+	if [[ -r $blacklist ]];then
+        numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
+        echo "** Blacklisting $numberOf domain(s)..."
+        cat $blacklist >> $piholeDir/$matter
+	fi
+
+	# Whitelist (if applicable) domains
+	if [[ -r $whitelist ]];then
+        # Remove whitelist entries
+        numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
+        plural=; [[ "$numberOf" != "1" ]] && plural=s
+        echo "** Whitelisting $numberOf domain${plural}..."
+
+        # Append a "$" to the end, prepend a "^" to the beginning, and
+        # replace "." with "\." of each line to turn each entry into a
+        # regexp so it can be parsed out with grep -x
+        awk -F '[# \t]' 'NF>0&&$1!="" {print "^"$1"$"}' $whitelist | sed 's/\./\\./g' > $latentWhitelist
+	else
+        rm $latentWhitelist 2>/dev/null
+	fi
+
+	# Prevent our sources from being pulled into the hole
+	plural=; [[ "${#sources[@]}" != "1" ]] && plural=s
+	echo "** Whitelisting ${#sources[@]} ad list source${plural}..."
+	for url in ${sources[@]}
+	do
+        echo "$url" | awk -F '/' '{print "^"$3"$"}' | sed 's/\./\\./g' >> $latentWhitelist
+	done
+
+	# Remove whitelist entries from list
+	grep -vxf $latentWhitelist $piholeDir/$matter > $piholeDir/$andLight
+}
+
+function gravity_unique() {
+	# Sort and remove duplicates
+	sort -u  $piholeDir/$supernova > $piholeDir/$eventHorizon
+	numberOf=$(wc -l < $piholeDir/$eventHorizon)
+	echo "** $numberOf unique domains trapped in the event horizon."
+}
+
+function gravity_hostFormat() {
+	# Format domain list as "192.168.x.x domain.com"
+	echo "** Formatting domains into a HOSTS file..."
+  # If there is a value in the $piholeIPv6, then IPv6 will be used, so the awk command modified to create a line for both protocols
+  if [[ -n $piholeIPv6 ]];then
+    cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' > $piholeDir/$accretionDisc
+  else
+    # Otherwise, just create gravity.list as normal using IPv4
+    cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' > $piholeDir/$accretionDisc
+  fi
+	# Copy the file over as /etc/pihole/gravity.list so dnsmasq can use it
+	cp $piholeDir/$accretionDisc $adList
+}
+
+# blackbody - remove any remnant files from script processes
+function gravity_blackbody() {
+	# Loop through list files
+	for file in $piholeDir/*.$justDomainsExtension
+	do
+		# If list is in active array then leave it (noop) else rm the list
+		if [[ " ${activeDomains[@]} " =~ " ${file} " ]]; then
+			:
+		else
+			rm -f $file
+		fi
+	done
+}
+
+function gravity_advanced() {
 	# Remove comments and print only the domain name
 	# Most of the lists downloaded are already in hosts file format but the spacing/formating is not contigious
 	# This helps with that and makes it easier to read
 	# It also helps with debugging so each stage of the script can be researched more in depth
-		echo "$data" | awk 'NF {if ($1 !~ "#") { if (NF>1) {print $2} else {print $1}}}' > $saveLocation."$justDomainsExtension"
+	awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$andLight | \
-	else
+		sed -nr -e 's/\.{2,}/./g' -e '/\./p' >  $piholeDir/$supernova
-		echo "Skipping $domain list because it does not have any new entries..."
-	fi
-done
 
-# Find all files with the .domains extension and compile them into one file and remove CRs
+	numberOf=$(wc -l < $piholeDir/$supernova)
-echo "** Aggregating list of domains..."
-find $origin/ -type f -name "*.$justDomainsExtension" -exec cat {} \; | tr -d '\r' > $origin/$matter
-
-# Append blacklist entries if they exist
-if [[ -f $blacklist ]];then
-        numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
-        echo "** Blacklisting $numberOf domain(s)..."
-        cat $blacklist >> $origin/$matter
-else
-        :
-fi
-
-function gravity_advanced()
-###########################
-	{
-	numberOf=$(cat $origin/$andLight | sed '/^\s*$/d' | wc -l)
 	echo "** $numberOf domains being pulled in by gravity..."
-	# Remove carriage returns and preceding whitespace
-	cat $origin/$andLight | sed $'s/\r$//' | sed '/^\s*$/d' > $origin/$supernova
-	# Sort and remove duplicates
-	cat $origin/$supernova | sort | uniq > $origin/$eventHorizon
-	numberOf=$(cat $origin/$eventHorizon | sed '/^\s*$/d' | wc -l)
-	echo "** $numberOf unique domains trapped in the event horizon."
-	# Format domain list as "192.168.x.x domain.com"
-	echo "** Formatting domains into a HOSTS file..."
-	cat $origin/$eventHorizon | awk '{sub(/\r$/,""); print "'"$piholeIP"'" $0}' > $origin/$accretionDisc
-	# Copy the file over as /etc/pihole/gravity.list so dnsmasq can use it
-	sudo cp $origin/$accretionDisc $adList
-	kill -HUP $(pidof dnsmasq)
-	}
 
-# Whitelist (if applicable) then remove duplicates and format for dnsmasq
+	gravity_unique
-if [[ -f $whitelist ]];then
+}
-	# Remove whitelist entries
+
-	numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
+function gravity_reload() {
-	echo "** Whitelisting $numberOf domain(s)..."
+	# Reload hosts file
-	# Append a "$" to the end of each line so it can be parsed out with grep -w
+	echo "** Refresh lists in dnsmasq..."
-	echo -n "^$" > $latentWhitelist
+
-	awk -F '[# \t]' 'NF>0&&$1!="" {print $1"$"}' $whitelist > $latentWhitelist
+	dnsmasqPid=$(pidof dnsmasq)
-	cat $origin/$matter | grep -vwf $latentWhitelist > $origin/$andLight
+
-	gravity_advanced
+	if [[ $dnsmasqPid ]]; then
-else
+		# service already running - reload config
-	cat $origin/$matter > $origin/$andLight
+		sudo kill -HUP $dnsmasqPid
-	gravity_advanced
+	else
-fi
+		# service not running, start it up
+		sudo service dnsmasq start
+	fi
+}
+
+gravity_collapse
+gravity_spinup
+gravity_Schwarzchild
+gravity_pulsar
+gravity_advanced
+gravity_hostFormat
+gravity_blackbody
+gravity_reload