Print details when adding status to adlist table

Signed-off-by: DL6ER <dl6er@dl6er.de>

.github/dependabot.yml

@@ -0,0 +1,10 @@
+version: 2
+updates:
+- package-ecosystem: github-actions
+  directory: "/"
+  schedule:
+    interval: weekly
+    day: saturday
+    time: "10:00"
+  open-pull-requests-limit: 10
+  target-branch: developement

.github/release.yml

@@ -0,0 +1,7 @@
+changelog:
+  exclude:
+    labels:
+      - internal
+    authors:
+      - dependabot
+      - github-actions

.github/workflows/codeql-analysis.yml

@@ -0,0 +1,40 @@
+name: "CodeQL"
+
+on:
+  push:
+    branches:
+      - master
+      - development
+  pull_request:
+    branches:
+      - master
+      - development
+  schedule:
+    - cron: '32 11 * * 6'
+
+jobs:
+  analyze:
+    name: Analyze
+    runs-on: ubuntu-latest
+
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    steps:
+    -
+      name: Checkout repository
+      uses: actions/checkout@v2
+    # Initializes the CodeQL tools for scanning.
+    -
+      name: Initialize CodeQL
+      uses: github/codeql-action/init@v1
+      with:
+        languages: 'python'
+    -
+      name: Autobuild
+      uses: github/codeql-action/autobuild@v1
+    -
+      name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v1

.github/workflows/stale.yml

@@ -0,0 +1,25 @@
+name: Mark stale issues
+
+on:
+  schedule:
+  - cron: '0 * * * *'
+  workflow_dispatch:
+
+jobs:
+  stale:
+
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+
+    steps:
+    - uses: actions/stale@v4
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        days-before-stale: 30
+        days-before-close: 5
+        stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Please comment or update this issue or it will be closed in 5 days.'
+        stale-issue-label: 'Submitter Attention Required'
+        exempt-issue-labels: 'Internal, Fixed in next release, Bug: Confirmed'
+        exempt-all-issue-assignees: true
+        operations-per-run: 300

.github/workflows/sync-back-to-dev.yml

@@ -0,0 +1,28 @@
+name: Sync Back to Development
+
+on:
+  push:
+    branches:
+      - master
+
+jobs:
+  sync-branches:
+    runs-on: ubuntu-latest
+    name: Syncing branches
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+      - name: Opening pull request
+        id: pull
+        uses: tretuna/sync-branches@1.4.0
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          FROM_BRANCH: 'master'
+          TO_BRANCH: 'development'
+          CONTENT_COMPARISON: true
+      - name: Label the pull request to ignore for release note generation
+        uses: actions-ecosystem/action-add-labels@v1
+        with:
+          labels: internal
+          repo: ${{ github.repository }}
+          number: ${{ steps.pull.outputs.PULL_REQUEST_NUMBER }}

.github/workflows/test.yml

@@ -5,21 +5,44 @@ on:
     types: [opened, synchronize, reopened, ready_for_review]
 
 jobs:
+  smoke-test:
+    if: github.event.pull_request.draft == false
+    runs-on: ubuntu-latest
+    steps:
+    -
+      name: Checkout repository
+      uses: actions/checkout@v2
+    -
+      name: Run Smoke Tests
+      run: |
+        # Ensure scripts in repository are executable
+        IFS=$'\n';
+        for f in $(find . -name '*.sh'); do if [[ ! -x $f ]]; then echo "$f is not executable" && FAIL=1; fi ;done
+        unset IFS;
+        # If FAIL is 1 then we fail.
+        [[ $FAIL == 1 ]] && exit 1 || echo "Smoke Tests Passed"
+
   distro-test:
     if: github.event.pull_request.draft == false
     runs-on: ubuntu-latest
+    needs: smoke-test
     strategy:
       matrix:
-        distro: [debian_9, debian_10, ubuntu_16, ubuntu_18, ubuntu_20, centos_7, centos_8, fedora_32, fedora_33]
+        distro: [debian_9, debian_10, debian_11, ubuntu_16, ubuntu_18, ubuntu_20, ubuntu_21, centos_7, centos_8, fedora_33, fedora_34]
     env:
       DISTRO: ${{matrix.distro}}
     steps:
-    - uses: actions/checkout@v1
-    - name: Set up Python 3.7
+    -
+      name: Checkout repository
+      uses: actions/checkout@v2
+    -
+      name: Set up Python 3.8
       uses: actions/setup-python@v2
       with:
-        python-version: 3.7
-    - name: Install dependencies
+        python-version: 3.8
+    -
+      name: Install dependencies
       run: pip install -r test/requirements.txt
-    - name: Test with tox
+    -
+      name: Test with tox
       run: tox -c test/tox.${DISTRO}.ini

.gitignore

@@ -7,70 +7,6 @@ __pycache__
 .tox
 .eggs
 *.egg-info
-
-
-# Created by https://www.gitignore.io/api/jetbrains+iml
-
-### JetBrains+iml ###
-# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and Webstorm
-# Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
-
-# All idea files, with exceptions
-.idea
-!.idea/codeStyles/*
-!.idea/codeStyleSettings.xml
-
-
-# Sensitive or high-churn files:
-.idea/**/dataSources/
-.idea/**/dataSources.ids
-.idea/**/dataSources.xml
-.idea/**/dataSources.local.xml
-.idea/**/sqlDataSources.xml
-.idea/**/dynamic.xml
-.idea/**/uiDesigner.xml
-
-# Gradle:
-.idea/**/gradle.xml
-.idea/**/libraries
-
-# CMake
-cmake-build-debug/
-
-# Mongo Explorer plugin:
-.idea/**/mongoSettings.xml
-
-## File-based project format:
-*.iws
-
-## Plugin-specific files:
-
-# IntelliJ
-/out/
-
-# mpeltonen/sbt-idea plugin
-.idea_modules/
-
-# JIRA plugin
-atlassian-ide-plugin.xml
-
-# Cursive Clojure plugin
-.idea/replstate.xml
-
-# Ruby plugin and RubyMine
-/.rakeTasks
-
-# Crashlytics plugin (for Android Studio and IntelliJ)
-com_crashlytics_export_strings.xml
-crashlytics.properties
-crashlytics-build.properties
-fabric.properties
-
-### JetBrains+iml Patch ###
-# Reason: https://github.com/joeblau/gitignore.io/issues/186#issuecomment-249601023
-
+.idea/
 *.iml
-.idea/misc.xml
-*.ipr
-
-# End of https://www.gitignore.io/api/jetbrains+iml
+.vscode/

.idea/codeStyleSettings.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-    <component name="ProjectCodeStyleSettingsManager">
-        <option name="PER_PROJECT_SETTINGS">
-            <value>
-                <option name="OTHER_INDENT_OPTIONS">
-                    <value>
-                        <option name="INDENT_SIZE" value="2" />
-                        <option name="CONTINUATION_INDENT_SIZE" value="8" />
-                        <option name="TAB_SIZE" value="2" />
-                        <option name="USE_TAB_CHARACTER" value="false" />
-                        <option name="SMART_TABS" value="false" />
-                        <option name="LABEL_INDENT_SIZE" value="0" />
-                        <option name="LABEL_INDENT_ABSOLUTE" value="false" />
-                        <option name="USE_RELATIVE_INDENTS" value="false" />
-                    </value>
-                </option>
-                <MarkdownNavigatorCodeStyleSettings>
-                    <option name="RIGHT_MARGIN" value="72" />
-                </MarkdownNavigatorCodeStyleSettings>
-            </value>
-        </option>
-        <option name="USE_PER_PROJECT_SETTINGS" value="true" />
-    </component>
-</project>

.idea/codeStyles/Project.xml

@@ -1,7 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <MarkdownNavigatorCodeStyleSettings>
-      <option name="RIGHT_MARGIN" value="72" />
-    </MarkdownNavigatorCodeStyleSettings>
-  </code_scheme>
-</component>

.idea/codeStyles/codeStyleConfig.xml

@@ -1,5 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <state>
-    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
-  </state>
-</component>

CONTRIBUTING.md

@@ -2,111 +2,6 @@
 
 Please read and understand the contribution guide before creating an issue or pull request.
 
-## Etiquette
+The guide can be found here: [https://docs.pi-hole.net/guides/github/contributing/](https://docs.pi-hole.net/guides/github/contributing/)
 
-- Our goal for Pi-hole is **stability before features**. This means we focus on squashing critical bugs before adding new features. Often, we can do both in tandem, but bugs will take priority over a new feature.
-- Pi-hole is open source and [powered by donations](https://pi-hole.net/donate/), and as such, we give our **free time** to build, maintain, and **provide user support** for this project. It would be extremely unfair for us to suffer abuse or anger for our hard work, so please take a moment to consider that.
-- Please be considerate towards the developers and other users when raising issues or presenting pull requests.
-- Respect our decision(s), and do not be upset or abusive if your submission is not used.
 
-## Viability
-
-When requesting or submitting new features, first consider whether it might be useful to others. Open source projects are used by many people, who may have entirely different needs to your own. Think about whether or not your feature is likely to be used by other users of the project.
-
-## Procedure
-
-**Before filing an issue:**
-
-- Attempt to replicate and **document** the problem, to ensure that it wasn't a coincidental incident.
-- Check to make sure your feature suggestion isn't already present within the project.
-- Check the pull requests tab to ensure that the bug doesn't have a fix in progress.
-- Check the pull requests tab to ensure that the feature isn't already in progress.
-
-**Before submitting a pull request:**
-
-- Check the codebase to ensure that your feature doesn't already exist.
-- Check the pull requests to ensure that another person hasn't already submitted the feature or fix.
-- Read and understand the [DCO guidelines](https://docs.pi-hole.net/guides/github/contributing/) for the project.
-
-## Technical Requirements
-
-- Submit Pull Requests to the **development branch only**.
-- Before Submitting your Pull Request, merge `development` with your new branch and fix any conflicts. (Make sure you don't break anything in development!)
-- Please use the [Google Style Guide for Shell](https://google.github.io/styleguide/shell.xml) for your code submission styles.
-- Commit Unix line endings.
-- Please use the Pi-hole brand: **Pi-hole** (Take a special look at the capitalized 'P' and a low 'h' with a hyphen)
-- (Optional fun) keep to the theme of Star Trek/black holes/gravity.
-
-## Forking and Cloning from GitHub to GitHub
-
-1. Fork <https://github.com/pi-hole/pi-hole/> to a repo under a namespace you control, or have permission to use, for example: `https://github.com/<your_namespace>/<your_repo_name>/`. You can do this from the github.com website.
-2. Clone `https://github.com/<your_namespace>/<your_repo_name>/` with the tool of you choice.
-3. To keep your fork in sync with our repo, add an upstream remote for pi-hole/pi-hole to your repo.
-
-    ```bash
-    git remote add upstream https://github.com/pi-hole/pi-hole.git
-    ```
-
-4. Checkout the `development` branch from your fork `https://github.com/<your_namespace>/<your_repo_name>/`.
-5. Create a topic/branch, based on the `development` branch code. *Bonus fun to keep to the theme of Star Trek/black holes/gravity.*
-6. Make your changes and commit to your topic branch in your repo.
-7. Rebase your commits and squash any insignificant commits. See the notes below for an example.
-8. Merge `development` your branch and fix any conflicts.
-9. Open a Pull Request to merge your topic branch into our repo's `development` branch.
-
-- Keep in mind the technical requirements from above.
-
-## Forking and Cloning from GitHub to other code hosting sites
-
-- Forking is a GitHub concept and cannot be done from GitHub to other git-based code hosting sites. However, those sites may be able to mirror a GitHub repo.
-
-1. To contribute from another code hosting site, you must first complete the steps above to fork our repo to a GitHub namespace you have permission to use, for example: `https://github.com/<your_namespace>/<your_repo_name>/`.
-2. Create a repo in your code hosting site, for example: `https://gitlab.com/<your_namespace>/<your_repo_name>/`
-3. Follow the instructions from your code hosting site to create a mirror between `https://github.com/<your_namespace>/<your_repo_name>/` and `https://gitlab.com/<your_namespace>/<your_repo_name>/`.
-4. When you are ready to create a Pull Request (PR), follow the steps `(starting at step #6)` from [Forking and Cloning from GitHub to GitHub](#forking-and-cloning-from-github-to-github) and create the PR from `https://github.com/<your_namespace>/<your_repo_name>/`.
-
-## Notes for squashing commits with rebase
-
-- To rebase your commits and squash previous commits, you can use:
-
-    ```bash
-    git rebase -i your_topic_branch~(number of commits to combine)
-    ```
-
-- For more details visit [gitready.com](http://gitready.com/advanced/2009/02/10/squashing-commits-with-rebase.html)
-
-1. The following would combine the last four commits in the branch `mytopic`.
-
-    ```bash
-    git rebase -i mytopic~4
-    ```
-
-2. An editor window opens with the most recent commits indicated: (edit the commands to the left of the commit ID)
-
-    ```gitattributes
-    pick 9dff55b2 existing commit comments
-    squash ebb1a730 existing commit comments
-    squash 07cc5b50 existing commit comments
-    reword 9dff55b2 existing commit comments
-    ```
-
-3. Save and close the editor. The next editor window opens: (edit the new commit message). *If you select reword for a commit, an additional editor window will open for you to edit the comment.*
-
-    ```bash
-    new commit comments
-    Signed-off-by: yourname <your email address>
-    ```
-
-4. Save and close the editor for the rebase process to execute. The terminal output should say something like the following:
-
-    ```bash
-    Successfully rebased and updated refs/heads/mytopic.
-    ```
-
-5. Once you have a successful rebase, and before you sync your local clone, you have to force push origin to update your repo:
-
-    ```bash
-    git push -f origin
-    ```
-
-6. Continue on from step #7 from [Forking and Cloning from GitHub to GitHub](#forking-and-cloning-from-github-to-github)

README.md

@@ -11,9 +11,9 @@
 </p>
 <!-- markdownlint-enable MD033 -->
 
-The Pi-hole® is a [DNS sinkhole](https://en.wikipedia.org/wiki/DNS_Sinkhole) that protects your devices from unwanted content, without installing any client-side software.
+The Pi-hole® is a [DNS sinkhole](https://en.wikipedia.org/wiki/DNS_Sinkhole) that protects your devices from unwanted content without installing any client-side software.
 
-- **Easy-to-install**: our versatile installer walks you through the process, and takes less than ten minutes
+- **Easy-to-install**: our versatile installer walks you through the process and takes less than ten minutes
 - **Resolute**: content is blocked in _non-browser locations_, such as ad-laden mobile apps and smart TVs
 - **Responsive**: seamlessly speeds up the feel of everyday browsing by caching DNS queries
 - **Lightweight**: runs smoothly with [minimal hardware and software requirements](https://docs.pi-hole.net/main/prerequisites/)
@@ -22,7 +22,7 @@ The Pi-hole® is a [DNS sinkhole](https://en.wikipedia.org/wiki/DNS_Sinkhole) th
 - **Versatile**: can optionally function as a [DHCP server](https://discourse.pi-hole.net/t/how-do-i-use-pi-holes-built-in-dhcp-server-and-why-would-i-want-to/3026), ensuring *all* your devices are protected automatically
 - **Scalable**: [capable of handling hundreds of millions of queries](https://pi-hole.net/2017/05/24/how-much-traffic-can-pi-hole-handle/) when installed on server-grade hardware
 - **Modern**: blocks ads over both IPv4 and IPv6
-- **Free**: open source software which helps ensure _you_ are the sole person in control of your privacy
+- **Free**: open source software that helps ensure _you_ are the sole person in control of your privacy
 
 -----
 
@@ -57,21 +57,21 @@ Please refer to the [Pi-hole docker repo](https://github.com/pi-hole/docker-pi-h
 
 Once the installer has been run, you will need to [configure your router to have **DHCP clients use Pi-hole as their DNS server**](https://discourse.pi-hole.net/t/how-do-i-configure-my-devices-to-use-pi-hole-as-their-dns-server/245) which ensures that all devices connecting to your network will have content blocked without any further intervention.
 
-If your router does not support setting the DNS server, you can [use Pi-hole's built-in DHCP server](https://discourse.pi-hole.net/t/how-do-i-use-pi-holes-built-in-dhcp-server-and-why-would-i-want-to/3026); just be sure to disable DHCP on your router first (if it has that feature available).
+If your router does not support setting the DNS server, you can [use Pi-hole's built-in DHCP server](https://discourse.pi-hole.net/t/how-do-i-use-pi-holes-built-in-dhcp-server-and-why-would-i-want-to/3026); be sure to disable DHCP on your router first (if it has that feature available).
 
-As a last resort, you can always manually set each device to use Pi-hole as their DNS server.
+As a last resort, you can manually set each device to use Pi-hole as their DNS server.
 
 -----
 
-## Pi-hole is free, but powered by your support
+## Pi-hole is free but powered by your support
 
-There are many reoccurring costs involved with maintaining free, open source, and privacy-respecting software; expenses which [our volunteer developers](https://github.com/orgs/pi-hole/people) pitch in to cover out-of-pocket. This is just one example of how strongly we feel about our software, as well as the importance of keeping it maintained.
+There are many reoccurring costs involved with maintaining free, open source, and privacy-respecting software; expenses which [our volunteer developers](https://github.com/orgs/pi-hole/people) pitch in to cover out-of-pocket. This is just one example of how strongly we feel about our software and the importance of keeping it maintained.
 
 Make no mistake: **your support is absolutely vital to help keep us innovating!**
 
 ### [Donations](https://pi-hole.net/donate)
 
-Sending a donation using our Sponsor Button is **extremely helpful** in offsetting a portion of our monthly expenses and rewarding our dedicated development team:
+Donating using our Sponsor Button is **extremely helpful** in offsetting a portion of our monthly expenses:
 
 ### Alternative support
 
@@ -83,13 +83,13 @@ If you'd rather not donate (_which is okay!_), there are other ways you can help
 - [Digital Ocean](https://www.digitalocean.com/?refcode=344d234950e1) _affiliate link_
 - [Stickermule](https://www.stickermule.com/unlock?ref_id=9127301701&utm_medium=link&utm_source=invite) _earn a $10 credit after your first purchase_
 - [Amazon US](http://www.amazon.com/exec/obidos/redirect-home/pihole09-20) _affiliate link_
-- Spreading the word about our software, and how you have benefited from it
+- Spreading the word about our software and how you have benefited from it
 
 ### Contributing via GitHub
 
 We welcome _everyone_ to contribute to issue reports, suggest new features, and create pull requests.
 
-If you have something to add - anything from a typo through to a whole new feature, we're happy to check it out! Just make sure to fill out our template when submitting your request; the questions that it asks will help the volunteers quickly understand what you're aiming to achieve.
+If you have something to add - anything from a typo through to a whole new feature, we're happy to check it out! Just make sure to fill out our template when submitting your request; the questions it asks will help the volunteers quickly understand what you're aiming to achieve.
 
 You'll find that the [install script](https://github.com/pi-hole/pi-hole/blob/master/automated%20install/basic-install.sh) and the [debug script](https://github.com/pi-hole/pi-hole/blob/master/advanced/Scripts/piholeDebug.sh) have an abundance of comments, which will help you better understand how Pi-hole works. They're also a valuable resource to those who want to learn how to write scripts or code a program! We encourage anyone who likes to tinker to read through it and submit a pull request for us to review.
 
@@ -97,9 +97,9 @@ You'll find that the [install script](https://github.com/pi-hole/pi-hole/blob/ma
 
 ## Getting in touch with us
 
-While we are primarily reachable on our [Discourse User Forum](https://discourse.pi-hole.net/), we can also be found on a variety of social media outlets.
+While we are primarily reachable on our [Discourse User Forum](https://discourse.pi-hole.net/), we can also be found on various social media outlets.
 
-**Please be sure to check the FAQ's** before starting a new discussion. Many user questions already have answers and can be solved without any additional assistance.
+**Please be sure to check the FAQs** before starting a new discussion, as we do not have the spare time to reply to every request for assistance.
 
 - [Frequently Asked Questions](https://discourse.pi-hole.net/c/faqs)
 - [Feature Requests](https://discourse.pi-hole.net/c/feature-requests?order=votes)
@@ -125,15 +125,15 @@ Some of the statistics you can integrate include:
 - Queries cached
 - Unique clients
 
-The API can be accessed via [`telnet`](https://github.com/pi-hole/FTL), the Web (`admin/api.php`) and Command Line (`pihole -c -j`). You can find out [more details over here](https://discourse.pi-hole.net/t/pi-hole-api/1863).
+Access the API via [`telnet`](https://github.com/pi-hole/FTL), the Web (`admin/api.php`) and Command Line (`pihole -c -j`). You can find out [more details over here](https://discourse.pi-hole.net/t/pi-hole-api/1863).
 
 ### The Command Line Interface
 
-The [pihole](https://docs.pi-hole.net/core/pihole-command/) command has all the functionality necessary to be able to fully administer the Pi-hole, without the need of the Web Interface. It's fast, user-friendly, and auditable by anyone with an understanding of `bash`.
+The [pihole](https://docs.pi-hole.net/core/pihole-command/) command has all the functionality necessary to fully administer the Pi-hole, without the need of the Web Interface. It's fast, user-friendly, and auditable by anyone with an understanding of `bash`.
 
 Some notable features include:
 
-- [Whitelisting, Blacklisting and Regex](https://docs.pi-hole.net/core/pihole-command/#whitelisting-blacklisting-and-regex)
+- [Whitelisting, Blacklisting, and Regex](https://docs.pi-hole.net/core/pihole-command/#whitelisting-blacklisting-and-regex)
 - [Debugging utility](https://docs.pi-hole.net/core/pihole-command/#debugger)
 - [Viewing the live log file](https://docs.pi-hole.net/core/pihole-command/#tail)
 - [Updating Ad Lists](https://docs.pi-hole.net/core/pihole-command/#gravity)
@@ -149,7 +149,7 @@ This [optional dashboard](https://github.com/pi-hole/AdminLTE) allows you to vie
 
 Some notable features include:
 
-- Mobile friendly interface
+- Mobile-friendly interface
 - Password protection
 - Detailed graphs and doughnut charts
 - Top lists of domains and clients

advanced/01-pihole.conf

@@ -39,6 +39,4 @@ cache-size=@CACHE_SIZE@
 log-queries
 log-facility=/var/log/pihole.log
 
-local-ttl=2
-
 log-async

advanced/06-rfc6761.conf

@@ -0,0 +1,42 @@
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2021 Pi-hole, LLC (https://pi-hole.net)
+# Network-wide ad blocking via your own hardware.
+#
+# RFC 6761 config file for Pi-hole
+#
+# This file is copyright under the latest version of the EUPL.
+# Please see LICENSE file for your rights under this license.
+
+###############################################################################
+#      FILE AUTOMATICALLY POPULATED BY PI-HOLE INSTALL/UPDATE PROCEDURE.      #
+# ANY CHANGES MADE TO THIS FILE AFTER INSTALL WILL BE LOST ON THE NEXT UPDATE #
+#                                                                             #
+#             CHANGES SHOULD BE MADE IN A SEPARATE CONFIG FILE                #
+#                    WITHIN /etc/dnsmasq.d/yourname.conf                      #
+###############################################################################
+
+# RFC 6761: Caching DNS servers SHOULD recognize
+#     test, localhost, invalid
+# names as special and SHOULD NOT attempt to look up NS records for them, or
+# otherwise query authoritative DNS servers in an attempt to resolve these
+# names.
+server=/test/
+server=/localhost/
+server=/invalid/
+
+# The same RFC requests something similar for
+#     10.in-addr.arpa.      21.172.in-addr.arpa.  27.172.in-addr.arpa.
+#     16.172.in-addr.arpa.  22.172.in-addr.arpa.  28.172.in-addr.arpa.
+#     17.172.in-addr.arpa.  23.172.in-addr.arpa.  29.172.in-addr.arpa.
+#     18.172.in-addr.arpa.  24.172.in-addr.arpa.  30.172.in-addr.arpa.
+#     19.172.in-addr.arpa.  25.172.in-addr.arpa.  31.172.in-addr.arpa.
+#     20.172.in-addr.arpa.  26.172.in-addr.arpa.  168.192.in-addr.arpa.
+# Pi-hole implements this via the dnsmasq option "bogus-priv" (see
+# 01-pihole.conf) because this also covers IPv6.
+
+# OpenWRT furthermore blocks    bind, local, onion    domains
+# see https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob_plain;f=package/network/services/dnsmasq/files/rfc6761.conf;hb=HEAD
+# and https://www.iana.org/assignments/special-use-domain-names/special-use-domain-names.xhtml
+# We do not include the ".local" rule ourselves, see https://github.com/pi-hole/pi-hole/pull/4282#discussion_r689112972
+server=/bind/
+server=/onion/

advanced/Scripts/chronometer.sh

@@ -357,7 +357,7 @@ get_sys_stats() {
     ram_used="${ram_raw[1]}"
     ram_total="${ram_raw[2]}"
 
-    if [[ "$(pihole status web 2> /dev/null)" == "1" ]]; then
+    if [[ "$(pihole status web 2> /dev/null)" -ge "1" ]]; then
         ph_status="${COL_LIGHT_GREEN}Active"
     else
         ph_status="${COL_LIGHT_RED}Offline"

advanced/Scripts/database_migration/gravity-db.sh

@@ -122,4 +122,10 @@ upgrade_gravityDB(){
 		sqlite3 "${database}" < "${scriptPath}/13_to_14.sql"
 		version=14
 	fi
+	if [[ "$version" == "14" ]]; then
+		# Changes the vw_adlist created in 5_to_6
+		echo -e "  ${INFO} Upgrading gravity database from version 14 to 15"
+		sqlite3 "${database}" < "${scriptPath}/14_to_15.sql"
+		version=15
+	fi
 }

advanced/Scripts/database_migration/gravity/14_to_15.sql

@@ -0,0 +1,15 @@
+.timeout 30000
+
+PRAGMA FOREIGN_KEYS=OFF;
+
+BEGIN TRANSACTION;
+DROP VIEW vw_adlist;
+
+CREATE VIEW vw_adlist AS SELECT DISTINCT address, id
+    FROM adlist
+    WHERE enabled = 1
+    ORDER BY id;
+
+UPDATE info SET value = 15 WHERE property = 'version';
+
+COMMIT;

advanced/Scripts/list.sh

@@ -23,7 +23,7 @@ fi
 # have changed
 gravityDBfile="${GRAVITYDB}"
 
-reload=false
+noReloadRequested=false
 addmode=true
 verbose=true
 wildcard=false
@@ -35,6 +35,7 @@ typeId=""
 comment=""
 declare -i domaincount
 domaincount=0
+reload=false
 
 colfile="/opt/pihole/COL_TABLE"
 source ${colfile}
@@ -90,7 +91,8 @@ Options:
   -q, --quiet         Make output less verbose
   -h, --help          Show this help dialog
   -l, --list          Display all your ${listname}listed domains
-  --nuke              Removes all entries in a list"
+  --nuke              Removes all entries in a list
+  --comment \"text\"    Add a comment to the domain. If adding multiple domains the same comment will be used for all"
 
   exit 0
 }
@@ -268,7 +270,7 @@ while (( "$#" )); do
         "--white-wild" | "white-wild" ) typeId=2; wildcard=true;;
         "--wild" | "wildcard" ) typeId=3; wildcard=true;;
         "--regex" | "regex"   ) typeId=3;;
-        "-nr"| "--noreload"  ) reload=false;;
+        "-nr"| "--noreload"  ) noReloadRequested=true;;
         "-d" | "--delmode"   ) addmode=false;;
         "-q" | "--quiet"     ) verbose=false;;
         "-h" | "--help"      ) helpFunc;;
@@ -294,6 +296,6 @@ if $web; then
     echo "DONE"
 fi
 
-if [[ "${reload}" != false ]]; then
+if [[ ${reload} == true && ${noReloadRequested} == false ]]; then
     pihole restartdns reload-lists
 fi

advanced/Scripts/piholeCheckout.sh

@@ -166,12 +166,15 @@ checkout() {
         checkout_pull_branch "${webInterfaceDir}" "${2}"
     elif [[ "${1}" == "ftl" ]] ; then
         local path
+        local oldbranch
         path="${2}/${binary}"
+        oldbranch="$(pihole-FTL -b)"
 
         if check_download_exists "$path"; then
             echo "  ${TICK} Branch ${2} exists"
             echo "${2}" > /etc/pihole/ftlbranch
             chmod 644 /etc/pihole/ftlbranch
+            echo -e "  ${INFO} Switching to branch: \"${2}\" from \"${oldbranch}\""
             FTLinstall "${binary}"
             restart_service pihole-FTL
             enable_service pihole-FTL

advanced/Scripts/piholeDebug.sh

@@ -56,11 +56,6 @@ FAQ_BAD_ADDRESS="${COL_CYAN}https://discourse.pi-hole.net/t/why-do-i-see-bad-add
 
 # Other URLs we may use
 FORUMS_URL="${COL_CYAN}https://discourse.pi-hole.net${COL_NC}"
-TRICORDER_CONTEST="${COL_CYAN}https://pi-hole.net/2016/11/07/crack-our-medical-tricorder-win-a-raspberry-pi-3/${COL_NC}"
-
-# Port numbers used for uploading the debug log
-TRICORDER_NC_PORT_NUMBER=9999
-TRICORDER_SSL_PORT_NUMBER=9998
 
 # Directories required by Pi-hole
 # https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684
@@ -78,15 +73,12 @@ HTML_DIRECTORY="/var/www/html"
 WEB_GIT_DIRECTORY="${HTML_DIRECTORY}/admin"
 #BLOCK_PAGE_DIRECTORY="${HTML_DIRECTORY}/pihole"
 SHM_DIRECTORY="/dev/shm"
+ETC="/etc"
 
 # Files required by Pi-hole
 # https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684
 PIHOLE_CRON_FILE="${CRON_D_DIRECTORY}/pihole"
 
-PIHOLE_DNS_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/01-pihole.conf"
-PIHOLE_DHCP_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/02-pihole-dhcp.conf"
-PIHOLE_WILDCARD_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/03-wildcard.conf"
-
 WEB_SERVER_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/lighttpd.conf"
 WEB_SERVER_CUSTOM_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/external.conf"
 
@@ -96,6 +88,7 @@ PIHOLE_LOCAL_HOSTS_FILE="${PIHOLE_DIRECTORY}/local.list"
 PIHOLE_LOGROTATE_FILE="${PIHOLE_DIRECTORY}/logrotate"
 PIHOLE_SETUP_VARS_FILE="${PIHOLE_DIRECTORY}/setupVars.conf"
 PIHOLE_FTL_CONF_FILE="${PIHOLE_DIRECTORY}/pihole-FTL.conf"
+PIHOLE_CUSTOM_HOSTS_FILE="${PIHOLE_DIRECTORY}/custom.list"
 
 # Read the value of an FTL config key. The value is printed to stdout.
 #
@@ -141,6 +134,9 @@ PIHOLE_FTL_LOG="$(get_ftl_conf_value "LOGFILE" "${LOG_DIRECTORY}/pihole-FTL.log"
 PIHOLE_WEB_SERVER_ACCESS_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/access.log"
 PIHOLE_WEB_SERVER_ERROR_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/error.log"
 
+RESOLVCONF="${ETC}/resolv.conf"
+DNSMASQ_CONF="${ETC}/dnsmasq.conf"
+
 # An array of operating system "pretty names" that we officially support
 # We can loop through the array at any time to see if it matches a value
 #SUPPORTED_OS=("Raspbian" "Ubuntu" "Fedora" "Debian" "CentOS")
@@ -165,9 +161,6 @@ PIHOLE_PROCESSES=( "lighttpd" "pihole-FTL" )
 
 # Store the required directories in an array so it can be parsed through
 REQUIRED_FILES=("${PIHOLE_CRON_FILE}"
-"${PIHOLE_DNS_CONFIG_FILE}"
-"${PIHOLE_DHCP_CONFIG_FILE}"
-"${PIHOLE_WILDCARD_CONFIG_FILE}"
 "${WEB_SERVER_CONFIG_FILE}"
 "${WEB_SERVER_CUSTOM_CONFIG_FILE}"
 "${PIHOLE_INSTALL_LOG_FILE}"
@@ -185,7 +178,10 @@ REQUIRED_FILES=("${PIHOLE_CRON_FILE}"
 "${PIHOLE_DEBUG_LOG}"
 "${PIHOLE_FTL_LOG}"
 "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}"
-"${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}")
+"${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}"
+"${RESOLVCONF}"
+"${DNSMASQ_CONF}"
+"${PIHOLE_CUSTOM_HOSTS_FILE}")
 
 DISCLAIMER="This process collects information from your Pi-hole, and optionally uploads it to a unique and random directory on tricorder.pi-hole.net.
 
@@ -235,6 +231,7 @@ copy_to_debug_log() {
 }
 
 initialize_debug() {
+    local system_uptime
     # Clear the screen so the debug log is readable
     clear
     show_disclaimer
@@ -242,6 +239,10 @@ initialize_debug() {
     log_write "${COL_PURPLE}*** [ INITIALIZING ]${COL_NC}"
     # Timestamp the start of the log
     log_write "${INFO} $(date "+%Y-%m-%d:%H:%M:%S") debug log has been initialized."
+    # Uptime of the system
+    # credits to https://stackoverflow.com/questions/28353409/bash-format-uptime-to-show-days-hours-minutes
+    system_uptime=$(uptime | awk -F'( |,|:)+' '{if ($7=="min") m=$6; else {if ($7~/^day/){if ($9=="min") {d=$6;m=$8} else {d=$6;h=$8;m=$9}} else {h=$6;m=$7}}} {print d+0,"days,",h+0,"hours,",m+0,"minutes"}')
+    log_write "${INFO} System has been running for ${system_uptime}"
 }
 
 # This is a function for visually displaying the current test that is being run.
@@ -410,12 +411,12 @@ os_check() {
     # This function gets a list of supported OS versions from a TXT record at versions.pi-hole.net
     # and determines whether or not the script is running on one of those systems
     local remote_os_domain valid_os valid_version detected_os detected_version cmdResult digReturnCode response
-    remote_os_domain="versions.pi-hole.net"
+    remote_os_domain=${OS_CHECK_DOMAIN_NAME:-"versions.pi-hole.net"}
 
     detected_os=$(grep "\bID\b" /etc/os-release | cut -d '=' -f2 | tr -d '"')
     detected_version=$(grep VERSION_ID /etc/os-release | cut -d '=' -f2 | tr -d '"')
 
-    cmdResult="$(dig +short -t txt ${remote_os_domain} @ns1.pi-hole.net 2>&1; echo $?)"
+    cmdResult="$(dig +short -t txt "${remote_os_domain}" @ns1.pi-hole.net 2>&1; echo $?)"
     #Get the return code of the previous command (last line)
     digReturnCode="${cmdResult##*$'\n'}"
 
@@ -466,6 +467,9 @@ diagnose_operating_system() {
     # Display the current test that is running
     echo_current_diagnostic "Operating system"
 
+    # If the PIHOLE_DOCKER_TAG variable is set, include this information in the debug output
+    [ -n "${PIHOLE_DOCKER_TAG}" ] && log_write "${INFO} Pi-hole Docker Container: ${PIHOLE_DOCKER_TAG}"
+
     # If there is a /etc/*release file, it's probably a supported operating system, so we can
     if ls /etc/*release 1> /dev/null 2>&1; then
         # display the attributes to the user from the function made earlier
@@ -586,6 +590,27 @@ processor_check() {
     fi
 }
 
+disk_usage() {
+    local file_system
+    local hide
+
+    echo_current_diagnostic "Disk usage"
+    mapfile -t file_system < <(df -h)
+
+    # Some lines of df might contain sensitive information like usernames and passwords.
+    # E.g. curlftpfs filesystems (https://www.looklinux.com/mount-ftp-share-on-linux-using-curlftps/)
+    # We are not interested in those lines so we collect keyword, to remove them from the output
+    # Additinal keywords can be added, separated by "|"
+    hide="curlftpfs"
+
+    # only show those lines not containg a sensitive phrase
+    for line in "${file_system[@]}"; do
+      if [[ ! $line =~ $hide ]]; then
+        log_write "   ${line}"
+      fi
+    done
+}
+
 parse_setup_vars() {
     echo_current_diagnostic "Setup variables"
     # If the file exists,
@@ -605,38 +630,6 @@ parse_locale() {
     parse_file "${pihole_locale}"
 }
 
-does_ip_match_setup_vars() {
-    # Check for IPv4 or 6
-    local protocol="${1}"
-    # IP address to check for
-    local ip_address="${2}"
-    # See what IP is in the setupVars.conf file
-    local setup_vars_ip
-    setup_vars_ip=$(< ${PIHOLE_SETUP_VARS_FILE} grep IPV"${protocol}"_ADDRESS | cut -d '=' -f2)
-    # If it's an IPv6 address
-    if [[ "${protocol}" == "6" ]]; then
-        # Strip off the / (CIDR notation)
-        if [[ "${ip_address%/*}" == "${setup_vars_ip%/*}" ]]; then
-            # if it matches, show it in green
-            log_write "   ${COL_GREEN}${ip_address%/*}${COL_NC} matches the IP found in ${PIHOLE_SETUP_VARS_FILE}"
-        else
-            # otherwise show it in red with an FAQ URL
-            log_write "   ${COL_RED}${ip_address%/*}${COL_NC} does not match the IP found in ${PIHOLE_SETUP_VARS_FILE} (${FAQ_ULA})"
-        fi
-
-    else
-        # if the protocol isn't 6, it's 4 so no need to strip the CIDR notation
-        # since it exists in the setupVars.conf that way
-        if [[ "${ip_address}" == "${setup_vars_ip}" ]]; then
-            # show in green if it matches
-            log_write "   ${COL_GREEN}${ip_address}${COL_NC} matches the IP found in ${PIHOLE_SETUP_VARS_FILE}"
-        else
-            # otherwise show it in red
-            log_write "   ${COL_RED}${ip_address}${COL_NC} does not match the IP found in ${PIHOLE_SETUP_VARS_FILE} (${FAQ_ULA})"
-        fi
-    fi
-}
-
 detect_ip_addresses() {
     # First argument should be a 4 or a 6
     local protocol=${1}
@@ -653,8 +646,7 @@ detect_ip_addresses() {
         log_write "${TICK} IPv${protocol} address(es) bound to the ${PIHOLE_INTERFACE} interface:"
         # Since there may be more than one IP address, store them in an array
         for i in "${!ip_addr_list[@]}"; do
-            # For each one in the list, print it out
-            does_ip_match_setup_vars "${protocol}" "${ip_addr_list[$i]}"
+            log_write "    ${ip_addr_list[$i]}"
         done
         # Print a blank line just for formatting
         log_write ""
@@ -663,13 +655,6 @@ detect_ip_addresses() {
         log_write "${CROSS} ${COL_RED}No IPv${protocol} address(es) found on the ${PIHOLE_INTERFACE}${COL_NC} interface.\\n"
         return 1
     fi
-    # If the protocol is v6
-    if [[ "${protocol}" == "6" ]]; then
-        # let the user know that as long as there is one green address, things should be ok
-        log_write "   ^ Please note that you may have more than one IP address listed."
-        log_write "   As long as one of them is green, and it matches what is in ${PIHOLE_SETUP_VARS_FILE}, there is no need for concern.\\n"
-        log_write "   The link to the FAQ is for an issue that sometimes occurs when the IPv6 address changes, which is why we check for it.\\n"
-    fi
 }
 
 ping_ipv4_or_ipv6() {
@@ -748,11 +733,11 @@ compare_port_to_service_assigned() {
 
     # If the service is a Pi-hole service, highlight it in green
     if [[ "${service_name}" == "${expected_service}" ]]; then
-        log_write "[${COL_GREEN}${port}${COL_NC}] is in use by ${COL_GREEN}${service_name}${COL_NC}"
+        log_write "${TICK} ${COL_GREEN}${port}${COL_NC} is in use by ${COL_GREEN}${service_name}${COL_NC}"
     # Otherwise,
     else
         # Show the service name in red since it's non-standard
-        log_write "[${COL_RED}${port}${COL_NC}] is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
+        log_write "${CROSS} ${COL_RED}${port}${COL_NC} is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
     fi
 }
 
@@ -768,36 +753,47 @@ check_required_ports() {
     # Sort the addresses and remove duplicates
     while IFS= read -r line; do
         ports_in_use+=( "$line" )
-    done < <( lsof -iTCP -sTCP:LISTEN -P -n +c 10 )
+    done < <( ss --listening --numeric --tcp --udp --processes --no-header )
 
     # Now that we have the values stored,
     for i in "${!ports_in_use[@]}"; do
         # loop through them and assign some local variables
         local service_name
-        service_name=$(echo "${ports_in_use[$i]}" | awk '{print $1}')
+        service_name=$(echo "${ports_in_use[$i]}" | awk '{gsub(/users:\(\("/,"",$7);gsub(/".*/,"",$7);print $7}')
         local protocol_type
-        protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $5}')
+        protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $1}')
         local port_number
-        port_number="$(echo "${ports_in_use[$i]}" | awk '{print $9}')"
+        port_number="$(echo "${ports_in_use[$i]}" | awk '{print $5}')" #  | awk '{gsub(/^.*:/,"",$5);print $5}')
 
-        # Skip the line if it's the titles of the columns the lsof command produces
-        if [[ "${service_name}" == COMMAND ]]; then
-            continue
-        fi
         # Use a case statement to determine if the right services are using the right ports
-        case "$(echo "$port_number" | rev | cut -d: -f1 | rev)" in
-            53) compare_port_to_service_assigned  "${resolver}" "${service_name}" 53
+        case "$(echo "${port_number}" | rev | cut -d: -f1 | rev)" in
+            53) compare_port_to_service_assigned  "${resolver}" "${service_name}" "${protocol_type}:${port_number}"
                 ;;
-            80) compare_port_to_service_assigned  "${web_server}" "${service_name}" 80
+            80) compare_port_to_service_assigned  "${web_server}" "${service_name}" "${protocol_type}:${port_number}"
                 ;;
-            4711) compare_port_to_service_assigned  "${ftl}" "${service_name}" 4711
+            4711) compare_port_to_service_assigned  "${ftl}" "${service_name}" "${protocol_type}:${port_number}"
                 ;;
             # If it's not a default port that Pi-hole needs, just print it out for the user to see
-            *) log_write "${port_number} ${service_name} (${protocol_type})";
+            *) log_write "    ${protocol_type}:${port_number} is in use by ${service_name:=<unknown>}";
         esac
     done
 }
 
+ip_command() {
+    # Obtain and log information from "ip XYZ show" commands
+    echo_current_diagnostic "${2}"
+    local entries=()
+    mapfile -t entries < <(ip "${1}" show)
+    for line in "${entries[@]}"; do
+        log_write "   ${line}"
+    done
+}
+
+check_ip_command() {
+    ip_command "addr" "Network interfaces and addresses"
+    ip_command "route" "Network routing table"
+}
+
 check_networking() {
     # Runs through several of the functions made earlier; we just clump them
     # together since they are all related to the networking aspect of things
@@ -806,7 +802,9 @@ check_networking() {
     detect_ip_addresses "6"
     ping_gateway "4"
     ping_gateway "6"
-    check_required_ports
+    # Skip the following check if installed in docker container. Unpriv'ed containers do not have access to the information required
+    # to resolve the service name listening - and the container should not start if there was a port conflict anyway
+    [ -z "${PIHOLE_DOCKER_TAG}" ] && check_required_ports
 }
 
 check_x_headers() {
@@ -922,6 +920,7 @@ dig_at() {
         #     s/\/.*$//g;
         #          Removes CIDR and everything thereafter (e.g., scope properties)
         addresses="$(ip address show dev "${iface}" | sed "/${sed_selector} /!d;s/^.*${sed_selector} //g;s/\/.*$//g;")"
+        if [ -n "${addresses}" ]; then
           while IFS= read -r local_address ; do
               # Check if Pi-hole can use itself to block a domain
               if local_dig=$(dig +tries=1 +time=2 -"${protocol}" "${random_url}" @"${local_address}" +short "${record_type}"); then
@@ -932,6 +931,9 @@ dig_at() {
                   log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${random_url} on ${COL_RED}${iface}${COL_NC} (${COL_RED}${local_address}${COL_NC})"
               fi
           done <<< "${addresses}"
+        else
+          log_write "${TICK} No IPv${protocol} address available on ${COL_CYAN}${iface}${COL_NC}"
+        fi
     done <<< "${interfaces}"
 
     # Finally, we need to make sure legitimate queries can out to the Internet using an external, public DNS server
@@ -1109,13 +1111,17 @@ list_files_in_dir() {
             :
         elif [[ "${dir_to_parse}" == "${SHM_DIRECTORY}" ]]; then
             # SHM file - we do not want to see the content, but we want to see the files and their sizes
-            log_write "$(ls -ld "${dir_to_parse}"/"${each_file}")"
+            log_write "$(ls -lhd "${dir_to_parse}"/"${each_file}")"
+        elif [[ "${dir_to_parse}" == "${DNSMASQ_D_DIRECTORY}" ]]; then
+            # in case of the dnsmasq directory inlcuede all files in the debug output
+            log_write "\\n${COL_GREEN}$(ls -lhd "${dir_to_parse}"/"${each_file}")${COL_NC}"
+            make_array_from_file "${dir_to_parse}/${each_file}"
         else
             # Then, parse the file's content into an array so each line can be analyzed if need be
             for i in "${!REQUIRED_FILES[@]}"; do
                 if [[ "${dir_to_parse}/${each_file}" == "${REQUIRED_FILES[$i]}" ]]; then
                     # display the filename
-                    log_write "\\n${COL_GREEN}$(ls -ld "${dir_to_parse}"/"${each_file}")${COL_NC}"
+                    log_write "\\n${COL_GREEN}$(ls -lhd "${dir_to_parse}"/"${each_file}")${COL_NC}"
                     # Check if the file we want to view has a limit (because sometimes we just need a little bit of info from the file, not the entire thing)
                     case "${dir_to_parse}/${each_file}" in
                         # If it's Web server error log, give the first and last 25 lines
@@ -1154,6 +1160,7 @@ show_content_of_pihole_files() {
     show_content_of_files_in_dir "${WEB_SERVER_LOG_DIRECTORY}"
     show_content_of_files_in_dir "${LOG_DIRECTORY}"
     show_content_of_files_in_dir "${SHM_DIRECTORY}"
+    show_content_of_files_in_dir "${ETC}"
 }
 
 head_tail_log() {
@@ -1254,11 +1261,11 @@ show_groups() {
 }
 
 show_adlists() {
-    show_db_entries "Adlists" "SELECT id,CASE enabled WHEN '0' THEN '   0' WHEN '1' THEN '      1' ELSE enabled END enabled,GROUP_CONCAT(adlist_by_group.group_id) group_ids,address,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM adlist LEFT JOIN adlist_by_group ON adlist.id = adlist_by_group.adlist_id GROUP BY id;" "4 7 12 100 19 19 50"
+    show_db_entries "Adlists" "SELECT id,CASE enabled WHEN '0' THEN '   0' WHEN '1' THEN '      1' ELSE enabled END enabled,GROUP_CONCAT(adlist_by_group.group_id) group_ids,address,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM adlist LEFT JOIN adlist_by_group ON adlist.id = adlist_by_group.adlist_id GROUP BY id;" "5 7 12 100 19 19 50"
 }
 
 show_domainlist() {
-    show_db_entries "Domainlist (0/1 = exact white-/blacklist, 2/3 = regex white-/blacklist)" "SELECT id,CASE type WHEN '0' THEN '0   ' WHEN '1' THEN ' 1  ' WHEN '2' THEN '  2 ' WHEN '3' THEN '   3' ELSE type END type,CASE enabled WHEN '0' THEN '   0' WHEN '1' THEN '      1' ELSE enabled END enabled,GROUP_CONCAT(domainlist_by_group.group_id) group_ids,domain,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM domainlist LEFT JOIN domainlist_by_group ON domainlist.id = domainlist_by_group.domainlist_id GROUP BY id;" "4 4 7 12 100 19 19 50"
+    show_db_entries "Domainlist (0/1 = exact white-/blacklist, 2/3 = regex white-/blacklist)" "SELECT id,CASE type WHEN '0' THEN '0   ' WHEN '1' THEN ' 1  ' WHEN '2' THEN '  2 ' WHEN '3' THEN '   3' ELSE type END type,CASE enabled WHEN '0' THEN '   0' WHEN '1' THEN '      1' ELSE enabled END enabled,GROUP_CONCAT(domainlist_by_group.group_id) group_ids,domain,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM domainlist LEFT JOIN domainlist_by_group ON domainlist.id = domainlist_by_group.domainlist_id GROUP BY id;" "5 4 7 12 100 19 19 50"
 }
 
 show_clients() {
@@ -1270,10 +1277,10 @@ show_messages() {
 }
 
 analyze_gravity_list() {
-    echo_current_diagnostic "Gravity List and Database"
+    echo_current_diagnostic "Gravity Database"
 
     local gravity_permissions
-    gravity_permissions=$(ls -ld "${PIHOLE_GRAVITY_DB_FILE}")
+    gravity_permissions=$(ls -lhd "${PIHOLE_GRAVITY_DB_FILE}")
     log_write "${COL_GREEN}${gravity_permissions}${COL_NC}"
 
     show_db_entries "Info table" "SELECT property,value FROM info" "20 40"
@@ -1352,7 +1359,7 @@ analyze_pihole_log() {
   OLD_IFS="$IFS"
   # Get the lines that are in the file(s) and store them in an array for parsing later
   IFS=$'\r\n'
-  pihole_log_permissions=$(ls -ld "${PIHOLE_LOG}")
+  pihole_log_permissions=$(ls -lhd "${PIHOLE_LOG}")
   log_write "${COL_GREEN}${pihole_log_permissions}${COL_NC}"
   mapfile -t pihole_log_head < <(head -n 20 ${PIHOLE_LOG})
   log_write "   ${COL_CYAN}-----head of $(basename ${PIHOLE_LOG})------${COL_NC}"
@@ -1366,25 +1373,18 @@ analyze_pihole_log() {
   IFS="$OLD_IFS"
 }
 
-tricorder_use_nc_or_curl() {
-    # Users can submit their debug logs using nc (unencrypted) or curl (encrypted) if available
-    # Check for curl first since encryption is a good thing
-    if command -v curl &> /dev/null; then
-        # If the command exists,
+curl_to_tricorder() {
+    # Users can submit their debug logs using curl (encrypted)
     log_write "    * Using ${COL_GREEN}curl${COL_NC} for transmission."
-        # transmit he log via TLS and store the token returned in a variable
-        tricorder_token=$(curl --silent --upload-file ${PIHOLE_DEBUG_LOG} https://tricorder.pi-hole.net:${TRICORDER_SSL_PORT_NUMBER})
-        if [ -z "${tricorder_token}" ]; then
-         # curl failed, fallback to nc
-         log_write "    * ${COL_GREEN}curl${COL_NC} failed, falling back to ${COL_YELLOW}netcat${COL_NC} for transmission."
-         tricorder_token=$(< ${PIHOLE_DEBUG_LOG} nc tricorder.pi-hole.net ${TRICORDER_NC_PORT_NUMBER})
+    # transmit the log via TLS and store the token returned in a variable
+    tricorder_token=$(curl --silent --fail --show-error --upload-file ${PIHOLE_DEBUG_LOG} https://tricorder.pi-hole.net 2>&1)
+    if [[ "${tricorder_token}" != "https://tricorder.pi-hole.net/"* ]]; then
+        log_write "    * ${COL_GREEN}curl${COL_NC} failed, contact Pi-hole support for assistance."
+        # Log curl error (if available)
+        if [ -n "${tricorder_token}" ]; then
+            log_write "    * Error message: ${COL_RED}${tricorder_token}${COL_NC}\\n"
+            tricorder_token=""
         fi
-    # Otherwise,
-    else
-        # use net cat
-        log_write "${INFO} Using ${COL_YELLOW}netcat${COL_NC} for transmission."
-        # Save the token returned by our server in a variable
-        tricorder_token=$(< ${PIHOLE_DEBUG_LOG} nc tricorder.pi-hole.net ${TRICORDER_NC_PORT_NUMBER})
     fi
 }
 
@@ -1403,48 +1403,55 @@ upload_to_tricorder() {
 
     # Provide information on what they should do with their token
     log_write "   * The debug log can be uploaded to tricorder.pi-hole.net for sharing with developers only."
-    log_write "    * For more information, see: ${TRICORDER_CONTEST}"
-    log_write "    * If available, we'll use openssl to upload the log, otherwise it will fall back to netcat."
-    # If pihole -d is running automatically (usually through the dashboard)
+
+    # If pihole -d is running automatically
     if [[ "${AUTOMATED}" ]]; then
         # let the user know
         log_write "${INFO} Debug script running in automated mode"
         # and then decide again which tool to use to submit it
-        tricorder_use_nc_or_curl
+        curl_to_tricorder
         # If we're not running in automated mode,
     else
+        # if not being called from the web interface
+        if [[ ! "${WEBCALL}" ]]; then
             echo ""
             # give the user a choice of uploading it or not
             # Users can review the log file locally (or the output of the script since they are the same) and try to self-diagnose their problem
             read -r -p "[?] Would you like to upload the log? [y/N] " response
             case ${response} in
                 # If they say yes, run our function for uploading the log
-            [yY][eE][sS]|[yY]) tricorder_use_nc_or_curl;;
+                [yY][eE][sS]|[yY]) curl_to_tricorder;;
                 # If they choose no, just exit out of the script
                 *) log_write "    * Log will ${COL_GREEN}NOT${COL_NC} be uploaded to tricorder.\\n    * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n";exit;
             esac
         fi
+    fi
     # Check if tricorder.pi-hole.net is reachable and provide token
     # along with some additional useful information
     if [[ -n "${tricorder_token}" ]]; then
         # Again, try to make this visually striking so the user realizes they need to do something with this information
         # Namely, provide the Pi-hole devs with the token
         log_write ""
-        log_write "${COL_PURPLE}***********************************${COL_NC}"
-        log_write "${COL_PURPLE}***********************************${COL_NC}"
+        log_write "${COL_PURPLE}*****************************************************************${COL_NC}"
+        log_write "${COL_PURPLE}*****************************************************************${COL_NC}\\n"
         log_write "${TICK} Your debug token is: ${COL_GREEN}${tricorder_token}${COL_NC}"
-        log_write "${COL_PURPLE}***********************************${COL_NC}"
-        log_write "${COL_PURPLE}***********************************${COL_NC}"
+        log_write "${INFO}${COL_RED} Logs are deleted 48 hours after upload.${COL_NC}\\n"
+        log_write "${COL_PURPLE}*****************************************************************${COL_NC}"
+        log_write "${COL_PURPLE}*****************************************************************${COL_NC}"
         log_write ""
-        log_write "   * Provide the token above to the Pi-hole team for assistance at"
-        log_write "   * ${FORUMS_URL}"
-        log_write "   * Your log will self-destruct on our server after ${COL_RED}48 hours${COL_NC}."
+        log_write "   * Provide the token above to the Pi-hole team for assistance at ${FORUMS_URL}"
+
     # If no token was generated
     else
         # Show an error and some help instructions
+        # Skip this if being called from web interface and autmatic mode was not chosen (users opt-out to upload)
+        if [[ "${WEBCALL}" ]] && [[ ! "${AUTOMATED}" ]]; then
+            :
+        else
             log_write "${CROSS}  ${COL_RED}There was an error uploading your debug log.${COL_NC}"
             log_write "   * Please try again or contact the Pi-hole team for assistance."
         fi
+    fi
     # Finally, show where the log file is no matter the outcome of the function so users can look at it
     log_write "   * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n"
 }
@@ -1461,6 +1468,8 @@ diagnose_operating_system
 check_selinux
 check_firewalld
 processor_check
+disk_usage
+check_ip_command
 check_networking
 check_name_resolution
 check_dhcp_servers

advanced/Scripts/piholeLogFlush.sh

@@ -11,6 +11,11 @@
 colfile="/opt/pihole/COL_TABLE"
 source ${colfile}
 
+# In case we're running at the same time as a system logrotate, use a
+# separate logrotate state file to prevent stepping on each other's
+# toes.
+STATEFILE="/var/lib/logrotate/pihole"
+
 # Determine database location
 # Obtain DBFILE=... setting from pihole-FTL.db
 # Constructed to return nothing when
@@ -32,7 +37,7 @@ if [[ "$@" == *"once"* ]]; then
     # Nightly logrotation
     if command -v /usr/sbin/logrotate >/dev/null; then
         # Logrotate once
-        /usr/sbin/logrotate --force /etc/pihole/logrotate
+        /usr/sbin/logrotate --force --state "${STATEFILE}" /etc/pihole/logrotate
     else
         # Copy pihole.log over to pihole.log.1
         # and empty out pihole.log
@@ -47,8 +52,8 @@ else
     # Manual flushing
     if command -v /usr/sbin/logrotate >/dev/null; then
         # Logrotate twice to move all data out of sight of FTL
-        /usr/sbin/logrotate --force /etc/pihole/logrotate; sleep 3
-        /usr/sbin/logrotate --force /etc/pihole/logrotate
+        /usr/sbin/logrotate --force --state "${STATEFILE}" /etc/pihole/logrotate; sleep 3
+        /usr/sbin/logrotate --force --state "${STATEFILE}" /etc/pihole/logrotate
     else
         # Flush both pihole.log and pihole.log.1 (if existing)
         echo " " > /var/log/pihole.log

advanced/Scripts/update.sh

@@ -35,13 +35,23 @@ source "/opt/pihole/COL_TABLE"
 
 GitCheckUpdateAvail() {
     local directory
+    local curBranch
     directory="${1}"
     curdir=$PWD
     cd "${directory}" || return
 
     # Fetch latest changes in this repo
-    git fetch --quiet origin
+    git fetch --tags --quiet origin
 
+    # Check current branch. If it is master, then check for the latest available tag instead of latest commit.
+    curBranch=$(git rev-parse --abbrev-ref HEAD)
+    if [[ "${curBranch}" == "master" ]]; then
+        # get the latest local tag
+        LOCAL=$(git describe --abbrev=0 --tags master)
+        # get the latest tag from remote
+        REMOTE=$(git describe --abbrev=0 --tags origin/master)
+
+    else
         # @ alone is a shortcut for HEAD. Older versions of git
         # need @{0}
         LOCAL="$(git rev-parse "@{0}")"
@@ -54,6 +64,8 @@ GitCheckUpdateAvail() {
         # branch.<name>.merge). A missing branchname
         # defaults to the current one.
         REMOTE="$(git rev-parse "@{upstream}")"
+    fi
+
 
     if [[ "${#LOCAL}" == 0 ]]; then
         echo -e "\\n  ${COL_LIGHT_RED}Error: Local revision could not be obtained, please contact Pi-hole Support"
@@ -95,6 +107,10 @@ main() {
     # shellcheck disable=1090,2154
     source "${setupVars}"
 
+    # Install packages used by this installation script (necessary if users have removed e.g. git from their systems)
+    package_manager_detect
+    install_dependent_packages "${INSTALLER_DEPS[@]}"
+
     # This is unlikely
     if ! is_repo "${PI_HOLE_FILES_DIR}" ; then
         echo -e "\\n  ${COL_LIGHT_RED}Error: Core Pi-hole repo is missing from system!"

advanced/Scripts/version.sh

@@ -13,6 +13,10 @@ DEFAULT="-1"
 COREGITDIR="/etc/.pihole/"
 WEBGITDIR="/var/www/html/admin/"
 
+# Source the setupvars config file
+# shellcheck disable=SC1091
+source /etc/pihole/setupVars.conf
+
 getLocalVersion() {
     # FTL requires a different method
     if [[ "$1" == "FTL" ]]; then
@@ -91,10 +95,11 @@ getRemoteVersion(){
     #If the above file exists, then we can read from that. Prevents overuse of GitHub API
     if [[ -f "$cachedVersions" ]]; then
         IFS=' ' read -r -a arrCache < "$cachedVersions"
+
         case $daemon in
             "pi-hole"   )  echo "${arrCache[0]}";;
-          "AdminLTE"  )  echo "${arrCache[1]}";;
-          "FTL"       )  echo "${arrCache[2]}";;
+            "AdminLTE"  )  [[ "${INSTALL_WEB_INTERFACE}" == true ]] && echo "${arrCache[1]}";;
+            "FTL"       )  [[ "${INSTALL_WEB_INTERFACE}" == true ]] && echo "${arrCache[2]}" || echo "${arrCache[1]}";;
         esac
 
         return 0
@@ -140,6 +145,11 @@ getLocalBranch(){
 }
 
 versionOutput() {
+    if [[ "$1" == "AdminLTE" && "${INSTALL_WEB_INTERFACE}" != true ]]; then
+        echo "  WebAdmin not installed"
+        return 1
+    fi
+
     [[ "$1" == "pi-hole" ]] && GITDIR=$COREGITDIR
     [[ "$1" == "AdminLTE" ]] && GITDIR=$WEBGITDIR
     [[ "$1" == "FTL" ]] && GITDIR="FTL"
@@ -166,6 +176,7 @@ versionOutput() {
         output="Latest ${1^} hash is $latHash"
     else
         errorOutput
+        return 1
     fi
 
     [[ -n "$output" ]] && echo "  $output"
@@ -177,10 +188,6 @@ errorOutput() {
 }
 
 defaultOutput() {
-    # Source the setupvars config file
-    # shellcheck disable=SC1091
-    source /etc/pihole/setupVars.conf
-
     versionOutput "pi-hole" "$@"
 
     if [[ "${INSTALL_WEB_INTERFACE}" == true ]]; then

advanced/Scripts/webpage.sh

@@ -44,7 +44,8 @@ Options:
   -e, email           Set an administrative contact address for the Block Page
   -h, --help          Show this help dialog
   -i, interface       Specify dnsmasq's interface listening behavior
-  -l, privacylevel    Set privacy level (0 = lowest, 3 = highest)"
+  -l, privacylevel    Set privacy level (0 = lowest, 3 = highest)
+  -t, teleporter      Backup configuration as an archive"
     exit 0
 }
 
@@ -53,7 +54,7 @@ add_setting() {
 }
 
 delete_setting() {
-    sed -i "/${1}/d" "${setupVars}"
+    sed -i "/^${1}/d" "${setupVars}"
 }
 
 change_setting() {
@@ -66,7 +67,7 @@ addFTLsetting() {
 }
 
 deleteFTLsetting() {
-    sed -i "/${1}/d" "${FTLconf}"
+    sed -i "/^${1}/d" "${FTLconf}"
 }
 
 changeFTLsetting() {
@@ -83,7 +84,7 @@ add_dnsmasq_setting() {
 }
 
 delete_dnsmasq_setting() {
-    sed -i "/${1}/d" "${dnsmasqconfig}"
+    sed -i "/^${1}/d" "${dnsmasqconfig}"
 }
 
 SetTemperatureUnit() {
@@ -198,6 +199,8 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
     # Setup interface listening behavior of dnsmasq
     delete_dnsmasq_setting "interface"
     delete_dnsmasq_setting "local-service"
+    delete_dnsmasq_setting "except-interface"
+    delete_dnsmasq_setting "bind-interfaces"
 
     if [[ "${DNSMASQ_LISTENING}" == "all" ]]; then
         # Listen on all interfaces, permit all origins
@@ -206,6 +209,7 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
         # Listen only on all interfaces, but only local subnets
         add_dnsmasq_setting "local-service"
     else
+        # Options "bind" and "single"
         # Listen only on one interface
         # Use eth0 as fallback interface if interface is missing in setupVars.conf
         if [ -z "${PIHOLE_INTERFACE}" ]; then
@@ -213,6 +217,11 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
         fi
 
         add_dnsmasq_setting "interface" "${PIHOLE_INTERFACE}"
+
+        if [[ "${DNSMASQ_LISTENING}" == "bind" ]]; then
+            # Really bind to interface
+            add_dnsmasq_setting "bind-interfaces"
+        fi
     fi
 
     if [[ "${CONDITIONAL_FORWARDING}" == true ]]; then
@@ -266,11 +275,21 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
         delete_setting "CONDITIONAL_FORWARDING_IP"
     fi
 
+    delete_dnsmasq_setting "rev-server"
+
     if [[ "${REV_SERVER}" == true ]]; then
         add_dnsmasq_setting "rev-server=${REV_SERVER_CIDR},${REV_SERVER_TARGET}"
         if [ -n "${REV_SERVER_DOMAIN}" ]; then
+            # Forward local domain names to the CF target, too
             add_dnsmasq_setting "server=/${REV_SERVER_DOMAIN}/${REV_SERVER_TARGET}"
         fi
+
+        if [[ "${DNS_FQDN_REQUIRED}" != true ]]; then
+            # Forward unqualified names to the CF target only when the "never
+            # forward non-FQDN" option is unticked
+            add_dnsmasq_setting "server=//${REV_SERVER_TARGET}"
+        fi
+
     fi
 
     # We need to process DHCP settings here as well to account for possible
@@ -521,25 +540,6 @@ CustomizeAdLists() {
     fi
 }
 
-SetPrivacyMode() {
-    if [[ "${args[2]}" == "true" ]]; then
-        change_setting "API_PRIVACY_MODE" "true"
-    else
-        change_setting "API_PRIVACY_MODE" "false"
-    fi
-}
-
-ResolutionSettings() {
-    typ="${args[2]}"
-    state="${args[3]}"
-
-    if [[ "${typ}" == "forward" ]]; then
-        change_setting "API_GET_UPSTREAM_DNS_HOSTNAME" "${state}"
-    elif [[ "${typ}" == "clients" ]]; then
-        change_setting "API_GET_CLIENT_HOSTNAME" "${state}"
-    fi
-}
-
 AddDHCPStaticAddress() {
     mac="${args[2]}"
     ip="${args[3]}"
@@ -608,9 +608,10 @@ Example: 'pihole -a -i local'
 Specify dnsmasq's network interface listening behavior
 
 Interfaces:
-  local               Listen on all interfaces, but only allow queries from
-                      devices that are at most one hop away (local devices)
-  single              Listen only on ${PIHOLE_INTERFACE} interface
+  local               Only respond to queries from devices that
+                      are at most one hop away (local devices)
+  single              Respond only on interface ${PIHOLE_INTERFACE}
+  bind                Bind only on interface ${PIHOLE_INTERFACE}
   all                 Listen on all interfaces, permit all origins"
         exit 0
     fi
@@ -621,6 +622,9 @@ Interfaces:
     elif [[ "${args[2]}" == "local" ]]; then
         echo -e "  ${INFO} Listening on all interfaces, permitting origins from one hop away (LAN)"
         change_setting "DNSMASQ_LISTENING" "local"
+    elif [[ "${args[2]}" == "bind" ]]; then
+        echo -e "  ${INFO} Binding on interface ${PIHOLE_INTERFACE}"
+        change_setting "DNSMASQ_LISTENING" "bind"
     else
         echo -e "  ${INFO} Listening only on interface ${PIHOLE_INTERFACE}"
         change_setting "DNSMASQ_LISTENING" "single"
@@ -698,10 +702,25 @@ AddCustomDNSAddress() {
 
     ip="${args[2]}"
     host="${args[3]}"
-	echo "${ip} ${host}" >> "${dnscustomfile}"
+    reload="${args[4]}"
 
-    # Restart dnsmasq to load new custom DNS entries
+    validHost="$(checkDomain "${host}")"
+    if [[ -n "${validHost}" ]]; then
+        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
+            echo "${ip} ${validHost}" >> "${dnscustomfile}"
+        else
+            echo -e "  ${CROSS} Invalid IP has been passed"
+            exit 1
+        fi
+    else
+        echo "  ${CROSS} Invalid Domain passed!"
+        exit 1
+    fi
+
+    # Restart dnsmasq to load new custom DNS entries only if $reload not false
+    if [[ ! $reload == "false" ]]; then
         RestartDNS
+    fi
 }
 
 RemoveCustomDNSAddress() {
@@ -709,16 +728,25 @@ RemoveCustomDNSAddress() {
 
     ip="${args[2]}"
     host="${args[3]}"
+    reload="${args[4]}"
 
+    validHost="$(checkDomain "${host}")"
+    if [[ -n "${validHost}" ]]; then
         if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
-        sed -i "/^${ip} ${host}$/d" "${dnscustomfile}"
+            sed -i "/^${ip} ${validHost}$/d" "${dnscustomfile}"
         else
             echo -e "  ${CROSS} Invalid IP has been passed"
             exit 1
         fi
+    else
+        echo "  ${CROSS} Invalid Domain passed!"
+        exit 1
+    fi
 
-    # Restart dnsmasq to update removed custom DNS entries
+    # Restart dnsmasq to load new custom DNS entries only if reload is not false
+    if [[ ! $reload == "false" ]]; then
         RestartDNS
+    fi
 }
 
 AddCustomCNAMERecord() {
@@ -726,11 +754,25 @@ AddCustomCNAMERecord() {
 
     domain="${args[2]}"
     target="${args[3]}"
+    reload="${args[4]}"
 
-    echo "cname=${domain},${target}" >> "${dnscustomcnamefile}"
-
-    # Restart dnsmasq to load new custom CNAME records
+    validDomain="$(checkDomain "${domain}")"
+    if [[ -n "${validDomain}" ]]; then
+        validTarget="$(checkDomain "${target}")"
+        if [[ -n "${validTarget}" ]]; then
+            echo "cname=${validDomain},${validTarget}" >> "${dnscustomcnamefile}"
+        else
+            echo "  ${CROSS} Invalid Target Passed!"
+            exit 1
+        fi
+    else
+        echo "  ${CROSS} Invalid Domain passed!"
+        exit 1
+    fi
+    # Restart dnsmasq to load new custom CNAME records only if reload is not false
+    if [[ ! $reload == "false" ]]; then
         RestartDNS
+    fi
 }
 
 RemoveCustomCNAMERecord() {
@@ -738,11 +780,12 @@ RemoveCustomCNAMERecord() {
 
     domain="${args[2]}"
     target="${args[3]}"
+    reload="${args[4]}"
 
     validDomain="$(checkDomain "${domain}")"
     if [[ -n "${validDomain}" ]]; then
         validTarget="$(checkDomain "${target}")"
-        if [[ -n "${validDomain}" ]]; then
+        if [[ -n "${validTarget}" ]]; then
             sed -i "/cname=${validDomain},${validTarget}$/d" "${dnscustomcnamefile}"
         else
             echo "  ${CROSS} Invalid Target Passed!"
@@ -753,8 +796,10 @@ RemoveCustomCNAMERecord() {
         exit 1
     fi
 
-    # Restart dnsmasq to update removed custom CNAME records
+    # Restart dnsmasq to update removed custom CNAME records only if $reload not false
+    if [[ ! $reload == "false" ]]; then
         RestartDNS
+    fi
 }
 
 main() {
@@ -777,8 +822,6 @@ main() {
         "layout"              ) SetWebUILayout;;
         "theme"               ) SetWebUITheme;;
         "-h" | "--help"       ) helpFunc;;
-        "privacymode"         ) SetPrivacyMode;;
-        "resolve"             ) ResolutionSettings;;
         "addstaticdhcp"       ) AddDHCPStaticAddress;;
         "removestaticdhcp"    ) RemoveDHCPStaticAddress;;
         "-e" | "email"        ) SetAdminEmail "$3";;

advanced/Scripts/wildcard_regex_converter.sh

@@ -1,28 +0,0 @@
-#!/usr/bin/env bash
-# Pi-hole: A black hole for Internet advertisements
-# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
-# Network-wide ad blocking via your own hardware.
-#
-# Provides an automated migration subroutine to convert Pi-hole v3.x wildcard domains to Pi-hole v4.x regex filters
-#
-# This file is copyright under the latest version of the EUPL.
-# Please see LICENSE file for your rights under this license.
-
-# regexFile set in gravity.sh
-
-wildcardFile="/etc/dnsmasq.d/03-pihole-wildcard.conf"
-
-convert_wildcard_to_regex() {
-    if [ ! -f "${wildcardFile}" ]; then
-        return
-    fi
-    local addrlines domains uniquedomains
-    # Obtain wildcard domains from old file
-    addrlines="$(grep -oE "/.*/" ${wildcardFile})"
-    # Strip "/" from domain names and convert "." to regex-compatible "\."
-    domains="$(sed 's/\///g;s/\./\\./g' <<< "${addrlines}")"
-    # Remove repeated domains (may have been inserted two times due to A and AAAA blocking)
-    uniquedomains="$(uniq <<< "${domains}")"
-    # Automatically generate regex filters and remove old wildcards file
-    awk '{print "(^|\\.)"$0"$"}' <<< "${uniquedomains}" >> "${regexFile:?}" && rm "${wildcardFile}"
-}

advanced/Templates/gravity.db.sql

@@ -57,7 +57,7 @@ CREATE TABLE info
 	value TEXT NOT NULL
 );
 
-INSERT INTO "info" VALUES('version','14');
+INSERT INTO "info" VALUES('version','15');
 
 CREATE TABLE domain_audit
 (
@@ -143,12 +143,10 @@ CREATE VIEW vw_gravity AS SELECT domain, adlist_by_group.group_id AS group_id
     LEFT JOIN "group" ON "group".id = adlist_by_group.group_id
     WHERE adlist.enabled = 1 AND (adlist_by_group.group_id IS NULL OR "group".enabled = 1);
 
-CREATE VIEW vw_adlist AS SELECT DISTINCT address, adlist.id AS id
+CREATE VIEW vw_adlist AS SELECT DISTINCT address, id
     FROM adlist
-    LEFT JOIN adlist_by_group ON adlist_by_group.adlist_id = adlist.id
-    LEFT JOIN "group" ON "group".id = adlist_by_group.group_id
-    WHERE adlist.enabled = 1 AND (adlist_by_group.group_id IS NULL OR "group".enabled = 1)
-    ORDER BY adlist.id;
+    WHERE enabled = 1
+    ORDER BY id;
 
 CREATE TRIGGER tr_domainlist_add AFTER INSERT ON domainlist
     BEGIN

advanced/Templates/pihole-FTL.conf

@@ -0,0 +1,2 @@
+#; Pi-hole FTL config file
+#; Comments should start with #; to avoid issues with PHP and bash reading this file

advanced/Templates/pihole-FTL.service

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/usr/bin/env sh
 ### BEGIN INIT INFO
 # Provides:          pihole-FTL
 # Required-Start:    $remote_fs $syslog $network
@@ -9,11 +9,8 @@
 # Description:       Enable service provided by pihole-FTL daemon
 ### END INIT INFO
 
-FTLUSER=pihole
-PIDFILE=/run/pihole-FTL.pid
-
 is_running() {
-    pgrep -o "pihole-FTL" > /dev/null 2>&1
+  pgrep -xo "pihole-FTL" > /dev/null
 }
 
 
@@ -23,27 +20,22 @@ start() {
     echo "pihole-FTL is already running"
   else
     # Touch files to ensure they exist (create if non-existing, preserve if existing)
-    touch /var/log/pihole-FTL.log /var/log/pihole.log
-    touch /run/pihole-FTL.pid /run/pihole-FTL.port
-    touch /etc/pihole/dhcp.leases
-    mkdir -p /run/pihole
-    mkdir -p /var/log/pihole
-    chown pihole:pihole /run/pihole /var/log/pihole
-    # Remove possible leftovers from previous pihole-FTL processes
-    rm -f /dev/shm/FTL-* 2> /dev/null
-    rm /run/pihole/FTL.sock 2> /dev/null
+    mkdir -pm 0755 /run/pihole
+    touch /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases
     # Ensure that permissions are set so that pihole-FTL can edit all necessary files
-    chown pihole:pihole /run/pihole-FTL.pid /run/pihole-FTL.port
-    chown pihole:pihole /etc/pihole /etc/pihole/dhcp.leases 2> /dev/null
-    chown pihole:pihole /var/log/pihole-FTL.log /var/log/pihole.log
-    chmod 0644 /var/log/pihole-FTL.log /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole.log
+    chown pihole:pihole /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases /run/pihole /etc/pihole
+    chmod 0644 /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases
+    # Ensure that permissions are set so that pihole-FTL can edit the files. We ignore errors as the file may not (yet) exist
+    chmod -f 0644 /etc/pihole/macvendor.db
     # Chown database files to the user FTL runs as. We ignore errors as the files may not (yet) exist
-    chown pihole:pihole /etc/pihole/pihole-FTL.db /etc/pihole/gravity.db 2> /dev/null
-    if setcap CAP_NET_BIND_SERVICE,CAP_NET_RAW,CAP_NET_ADMIN,CAP_SYS_NICE+eip "$(which pihole-FTL)"; then
-      su -s /bin/sh -c "/usr/bin/pihole-FTL" "$FTLUSER"
+    chown -f pihole:pihole /etc/pihole/pihole-FTL.db /etc/pihole/gravity.db /etc/pihole/macvendor.db
+    # Chown database file permissions so that the pihole group (web interface) can edit the file. We ignore errors as the files may not (yet) exist
+    chmod -f 0664 /etc/pihole/pihole-FTL.db
+    if setcap CAP_NET_BIND_SERVICE,CAP_NET_RAW,CAP_NET_ADMIN,CAP_SYS_NICE,CAP_IPC_LOCK,CAP_CHOWN+eip "/usr/bin/pihole-FTL"; then
+      su -s /bin/sh -c "/usr/bin/pihole-FTL" pihole
     else
       echo "Warning: Starting pihole-FTL as root because setting capabilities is not supported on this system"
-      pihole-FTL
+      /usr/bin/pihole-FTL
     fi
     echo
   fi
@@ -52,20 +44,20 @@ start() {
 # Stop the service
 stop() {
   if is_running; then
-    pkill -o pihole-FTL
-    for i in {1..5}; do
+    pkill -xo "pihole-FTL"
+    for i in 1 2 3 4 5; do
       if ! is_running; then
         break
       fi
 
-      echo -n "."
+      printf "."
       sleep 1
     done
     echo
 
     if is_running; then
       echo "Not stopped; may still be shutting down or shutdown may have failed, killing now"
-      pkill -o -9 pihole-FTL
+      pkill -xo -9 "pihole-FTL"
       exit 1
     else
       echo "Stopped"
@@ -73,6 +65,8 @@ stop() {
   else
     echo "Not running"
   fi
+  # Cleanup
+  rm -f /run/pihole/FTL.sock /dev/shm/FTL-*
   echo
 }
 
@@ -101,7 +95,7 @@ case "$1" in
         start
         ;;
   *)
-        echo $"Usage: $0 {start|stop|restart|reload|status}"
+        echo "Usage: $0 {start|stop|restart|reload|status}"
         exit 1
 esac
 

advanced/Templates/pihole.cron

@@ -26,7 +26,7 @@
 #          parameter "quiet": don't print messages
 00 00   * * *   root    PATH="$PATH:/usr/sbin:/usr/local/bin/" pihole flush once quiet
 
-@reboot root /usr/sbin/logrotate /etc/pihole/logrotate
+@reboot root /usr/sbin/logrotate --state /var/lib/logrotate/pihole /etc/pihole/logrotate
 
 # Pi-hole: Grab local version and branch every 10 minutes
 */10 *  * * *   root    PATH="$PATH:/usr/sbin:/usr/local/bin/" pihole updatechecker local

advanced/index.php

@@ -73,12 +73,12 @@ if ($serverName === "pi.hole"
             <meta charset='utf-8'>
             $viewPort
             <title>● $serverName</title>
-            <link rel='stylesheet' href='pihole/blockingpage.css'>
-            <link rel='shortcut icon' href='admin/img/favicons/favicon.ico' type='image/x-icon'>
+            <link rel='stylesheet' href='/pihole/blockingpage.css'>
+            <link rel='shortcut icon' href='/admin/img/favicons/favicon.ico' type='image/x-icon'>
         </head>
         <body id='splashpage'>
             <div id="pihole_card">
-              <img src='admin/img/logo.svg' alt='Pi-hole logo' id="pihole_logo_splash" />
+              <img src='/admin/img/logo.svg' alt='Pi-hole logo' id="pihole_logo_splash" />
               <p>Pi-<strong>hole</strong>: Your black hole for Internet advertisements</p>
               <a href='/admin'>Did you mean to go to the admin panel?</a>
             </div>

advanced/lighttpd.conf.debian

@@ -20,7 +20,6 @@ server.modules = (
     "mod_accesslog",
     "mod_auth",
     "mod_expire",
-    "mod_compress",
     "mod_redirect",
     "mod_setenv",
     "mod_rewrite"
@@ -41,26 +40,6 @@ index-file.names            = ( "index.php", "index.html", "index.lighttpd.html"
 url.access-deny             = ( "~", ".inc", ".md", ".yml", ".ini" )
 static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
 
-compress.cache-dir = "/var/cache/lighttpd/compress/"
-compress.filetype  = (
-    "application/json",
-    "application/vnd.ms-fontobject",
-    "application/xml",
-    "font/eot",
-    "font/opentype",
-    "font/otf",
-    "font/ttf",
-    "image/bmp",
-    "image/svg+xml",
-    "image/vnd.microsoft.icon",
-    "image/x-icon",
-    "text/css",
-    "text/html",
-    "text/javascript",
-    "text/plain",
-    "text/xml"
-)
-
 mimetype.assign = (
     ".ico"   => "image/x-icon",
     ".jpeg"  => "image/jpeg",
@@ -99,11 +78,6 @@ $HTTP["url"] =~ "^/admin/" {
         "X-Pi-hole" => "The Pi-hole Web interface is working!",
         "X-Frame-Options" => "DENY"
     )
-
-    $HTTP["url"] =~ "\.(eot|otf|tt[cf]|woff2?)$" {
-        # Allow Block Page access to local fonts
-        setenv.add-response-header = ( "Access-Control-Allow-Origin" => "*" )
-    }
 }
 
 # Block . files from being served, such as .git, .github, .gitignore
@@ -111,5 +85,12 @@ $HTTP["url"] =~ "^/admin/\.(.*)" {
     url.access-deny = ("")
 }
 
+# allow teleporter and API qr code iframe on settings page
+$HTTP["url"] =~ "/(teleporter|api_token)\.php$" {
+    $HTTP["referer"] =~ "/admin/settings\.php" {
+        setenv.add-response-header = ( "X-Frame-Options" => "SAMEORIGIN" )
+    }
+}
+
 # Default expire header
 expire.url = ( "" => "access plus 0 seconds" )

advanced/lighttpd.conf.fedora

@@ -21,7 +21,6 @@ server.modules = (
     "mod_expire",
     "mod_fastcgi",
     "mod_accesslog",
-    "mod_compress",
     "mod_redirect",
     "mod_setenv",
     "mod_rewrite"
@@ -42,26 +41,6 @@ index-file.names            = ( "index.php", "index.html", "index.lighttpd.html"
 url.access-deny             = ( "~", ".inc", ".md", ".yml", ".ini" )
 static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
 
-compress.cache-dir = "/var/cache/lighttpd/compress/"
-compress.filetype  = (
-    "application/json",
-    "application/vnd.ms-fontobject",
-    "application/xml",
-    "font/eot",
-    "font/opentype",
-    "font/otf",
-    "font/ttf",
-    "image/bmp",
-    "image/svg+xml",
-    "image/vnd.microsoft.icon",
-    "image/x-icon",
-    "text/css",
-    "text/html",
-    "text/javascript",
-    "text/plain",
-    "text/xml"
-)
-
 mimetype.assign = (
     ".ico"   => "image/x-icon",
     ".jpeg"  => "image/jpeg",
@@ -107,11 +86,6 @@ $HTTP["url"] =~ "^/admin/" {
         "X-Pi-hole" => "The Pi-hole Web interface is working!",
         "X-Frame-Options" => "DENY"
     )
-
-    $HTTP["url"] =~ "\.(eot|otf|tt[cf]|woff2?)$" {
-        # Allow Block Page access to local fonts
-        setenv.add-response-header = ( "Access-Control-Allow-Origin" => "*" )
-    }
 }
 
 # Block . files from being served, such as .git, .github, .gitignore
@@ -119,5 +93,12 @@ $HTTP["url"] =~ "^/admin/\.(.*)" {
     url.access-deny = ("")
 }
 
+# allow teleporter and API qr code iframe on settings page
+$HTTP["url"] =~ "/(teleporter|api_token)\.php$" {
+    $HTTP["referer"] =~ "/admin/settings\.php" {
+        setenv.add-response-header = ( "X-Frame-Options" => "SAMEORIGIN" )
+    }
+}
+
 # Default expire header
 expire.url = ( "" => "access plus 0 seconds" )

automated install/basic-install.sh

@@ -2,7 +2,7 @@
 # shellcheck disable=SC1090
 
 # Pi-hole: A black hole for Internet advertisements
-# (c) 2017-2018 Pi-hole, LLC (https://pi-hole.net)
+# (c) 2017-2021 Pi-hole, LLC (https://pi-hole.net)
 # Network-wide ad blocking via your own hardware.
 #
 # Installs and Updates Pi-hole
@@ -34,27 +34,26 @@ export PATH+=':/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin'
 
 # List of supported DNS servers
 DNS_SERVERS=$(cat << EOM
-Google (ECS);8.8.8.8;8.8.4.4;2001:4860:4860:0:0:0:0:8888;2001:4860:4860:0:0:0:0:8844
+Google (ECS, DNSSEC);8.8.8.8;8.8.4.4;2001:4860:4860:0:0:0:0:8888;2001:4860:4860:0:0:0:0:8844
 OpenDNS (ECS, DNSSEC);208.67.222.222;208.67.220.220;2620:119:35::35;2620:119:53::53
 Level3;4.2.2.1;4.2.2.2;;
 Comodo;8.26.56.26;8.20.247.20;;
-DNS.WATCH;84.200.69.80;84.200.70.40;2001:1608:10:25:0:0:1c04:b12f;2001:1608:10:25:0:0:9249:d69b
+DNS.WATCH (DNSSEC);84.200.69.80;84.200.70.40;2001:1608:10:25:0:0:1c04:b12f;2001:1608:10:25:0:0:9249:d69b
 Quad9 (filtered, DNSSEC);9.9.9.9;149.112.112.112;2620:fe::fe;2620:fe::9
 Quad9 (unfiltered, no DNSSEC);9.9.9.10;149.112.112.10;2620:fe::10;2620:fe::fe:10
-Quad9 (filtered + ECS);9.9.9.11;149.112.112.11;2620:fe::11;2620:fe::fe:11
-Cloudflare;1.1.1.1;1.0.0.1;2606:4700:4700::1111;2606:4700:4700::1001
+Quad9 (filtered, ECS, DNSSEC);9.9.9.11;149.112.112.11;2620:fe::11;2620:fe::fe:11
+Cloudflare (DNSSEC);1.1.1.1;1.0.0.1;2606:4700:4700::1111;2606:4700:4700::1001
 EOM
 )
 
 # Location for final installation log storage
-installLogLoc=/etc/pihole/install.log
+installLogLoc="/etc/pihole/install.log"
 # This is an important file as it contains information specific to the machine it's being installed on
-setupVars=/etc/pihole/setupVars.conf
+setupVars="/etc/pihole/setupVars.conf"
 # Pi-hole uses lighttpd as a Web server, and this is the config file for it
-# shellcheck disable=SC2034
-lighttpdConfig=/etc/lighttpd/lighttpd.conf
+lighttpdConfig="/etc/lighttpd/lighttpd.conf"
 # This is a file used for the colorized output
-coltable=/opt/pihole/COL_TABLE
+coltable="/opt/pihole/COL_TABLE"
 
 # Root of the web server
 webroot="/var/www/html"
@@ -94,24 +93,9 @@ if [ -z "${USER}" ]; then
     USER="$(id -un)"
 fi
 
-
-# Check if we are running on a real terminal and find the rows and columns
-# If there is no real terminal, we will default to 80x24
-if [ -t 0 ] ; then
-  screen_size=$(stty size)
-else
-  screen_size="24 80"
-fi
-# Determine terminal rows and columns by parsing screen_size
-printf -v rows '%d' "${screen_size%% *}"
-printf -v columns '%d' "${screen_size##* }"
-
-# Divide by two so the dialogs take up half of the screen, which looks nice.
-r=$(( rows / 2 ))
-c=$(( columns / 2 ))
-# Unless the screen is tiny
-r=$(( r < 20 ? 20 : r ))
-c=$(( c < 70 ? 70 : c ))
+# whiptail dialog dimensions: 20 rows and 70 chars width assures to fit on small screens and is known to hold all content.
+r=20
+c=70
 
 ######## Undocumented Flags. Shhh ########
 # These are undocumented flags; some of which we can use when repairing an installation
@@ -186,12 +170,12 @@ os_check() {
         # This function gets a list of supported OS versions from a TXT record at versions.pi-hole.net
         # and determines whether or not the script is running on one of those systems
         local remote_os_domain valid_os valid_version valid_response detected_os detected_version display_warning cmdResult digReturnCode response
-        remote_os_domain="versions.pi-hole.net"
+        remote_os_domain=${OS_CHECK_DOMAIN_NAME:-"versions.pi-hole.net"}
 
-        detected_os=$(grep "\bID\b" /etc/os-release | cut -d '=' -f2 | tr -d '"')
+        detected_os=$(grep '^ID=' /etc/os-release | cut -d '=' -f2 | tr -d '"')
         detected_version=$(grep VERSION_ID /etc/os-release | cut -d '=' -f2 | tr -d '"')
 
-        cmdResult="$(dig +short -t txt ${remote_os_domain} @ns1.pi-hole.net 2>&1; echo $?)"
+        cmdResult="$(dig +short -t txt "${remote_os_domain}" @ns1.pi-hole.net 2>&1; echo $?)"
         # Gets the return code of the previous command (last line)
         digReturnCode="${cmdResult##*$'\n'}"
 
@@ -276,11 +260,11 @@ os_check() {
 }
 
 # Compatibility
-distro_check() {
-# If apt-get is installed, then we know it's part of the Debian family
+package_manager_detect() {
+    # First check to see if apt-get is installed.
     if is_command apt-get ; then
         # Set some global variables here
-    # We don't set them earlier since the family might be Red Hat, so these values would be different
+        # We don't set them earlier since the installed package manager might be rpm, so these values would be different
         PKG_MANAGER="apt-get"
         # A variable to store the command used to update the package cache
         UPDATE_PKG_CACHE="${PKG_MANAGER} update"
@@ -288,81 +272,27 @@ if is_command apt-get ; then
         PKG_INSTALL=("${PKG_MANAGER}" -qq --no-install-recommends install)
         # grep -c will return 1 if there are no matches. This is an acceptable condition, so we OR TRUE to prevent set -e exiting the script.
         PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"
-    # Some distros vary slightly so these fixes for dependencies may apply
-    # on Ubuntu 18.04.1 LTS we need to add the universe repository to gain access to dhcpcd5
-    APT_SOURCES="/etc/apt/sources.list"
-    if awk 'BEGIN{a=1;b=0}/bionic main/{a=0}/bionic.*universe/{b=1}END{exit a + b}' ${APT_SOURCES}; then
-        if ! whiptail --defaultno --title "Dependencies Require Update to Allowed Repositories" --yesno "Would you like to enable 'universe' repository?\\n\\nThis repository is required by the following packages:\\n\\n- dhcpcd5" "${r}" "${c}"; then
-            printf "  %b Aborting installation: Dependencies could not be installed.\\n" "${CROSS}"
-            exit 1
-        else
-            printf "  %b Enabling universe package repository for Ubuntu Bionic\\n" "${INFO}"
-            cp -p ${APT_SOURCES} ${APT_SOURCES}.backup # Backup current repo list
-            printf "  %b Backed up current configuration to %s\\n" "${TICK}" "${APT_SOURCES}.backup"
-            add-apt-repository universe
-            printf "  %b Enabled %s\\n" "${TICK}" "'universe' repository"
-        fi
-    fi
-    # Update package cache. This is required already here to assure apt-cache calls have package lists available.
+        # Update package cache
         update_package_cache || exit 1
-    # Debian 7 doesn't have iproute2 so check if it's available first
-    if apt-cache show iproute2 > /dev/null 2>&1; then
-        iproute_pkg="iproute2"
-    # Otherwise, check if iproute is available
-    elif apt-cache show iproute > /dev/null 2>&1; then
-        iproute_pkg="iproute"
-    # Else print error and exit
-    else
-        printf "  %b Aborting installation: iproute2 and iproute packages were not found in APT repository.\\n" "${CROSS}"
-        exit 1
-    fi
         # Check for and determine version number (major and minor) of current php install
+        local phpVer="php"
         if is_command php ; then
             printf "  %b Existing PHP installation detected : PHP version %s\\n" "${INFO}" "$(php <<< "<?php echo PHP_VERSION ?>")"
             printf -v phpInsMajor "%d" "$(php <<< "<?php echo PHP_MAJOR_VERSION ?>")"
             printf -v phpInsMinor "%d" "$(php <<< "<?php echo PHP_MINOR_VERSION ?>")"
-        # Is installed php version 7.0 or greater
-        if [ "${phpInsMajor}" -ge 7 ]; then
-            phpInsNewer=true
-        fi
-    fi
-    # Several other packages depend on the version of PHP. If PHP is not installed, or an insufficient version,
-    # those packages should fall back to the default (latest?)
-    if [[ "$phpInsNewer" != true ]]; then
-        # Prefer the php metapackage if it's there
-        if apt-cache show php > /dev/null 2>&1; then
-            phpVer="php"
-        # Else fall back on the php5 package if it's there
-        elif apt-cache show php5 > /dev/null 2>&1; then
-            phpVer="php5"
-        # Else print error and exit
-        else
-            printf "  %b Aborting installation: No PHP packages were found in APT repository.\\n" "${CROSS}"
-            exit 1
-        fi
-    else
-        # Else, PHP is already installed at a version beyond v7.0, so the additional packages
-        # should match version with the current PHP version.
             phpVer="php$phpInsMajor.$phpInsMinor"
         fi
-    # We also need the correct version for `php-sqlite` (which differs across distros)
-    if apt-cache show "${phpVer}-sqlite3" > /dev/null 2>&1; then
-        phpSqlite="sqlite3"
-    elif apt-cache show "${phpVer}-sqlite" > /dev/null 2>&1; then
-        phpSqlite="sqlite"
-    else
-        printf "  %b Aborting installation: No SQLite PHP module was found in APT repository.\\n" "${CROSS}"
-        exit 1
-    fi
+        # Packages required to perfom the os_check (stored as an array)
+        OS_CHECK_DEPS=(grep dnsutils)
         # Packages required to run this install script (stored as an array)
-    INSTALLER_DEPS=(dhcpcd5 git "${iproute_pkg}" whiptail dnsutils)
+        INSTALLER_DEPS=(git iproute2 whiptail ca-certificates)
         # Packages required to run Pi-hole (stored as an array)
-    PIHOLE_DEPS=(cron curl iputils-ping lsof netcat psmisc sudo unzip idn2 sqlite3 libcap2-bin dns-root-data libcap2)
+        PIHOLE_DEPS=(cron curl iputils-ping psmisc sudo unzip idn2 sqlite3 libcap2-bin dns-root-data libcap2 netcat-openbsd)
         # Packages required for the Web admin interface (stored as an array)
         # It's useful to separate this from Pi-hole, since the two repos are also setup separately
-    PIHOLE_WEB_DEPS=(lighttpd "${phpVer}-common" "${phpVer}-cgi" "${phpVer}-${phpSqlite}" "${phpVer}-xml" "${phpVer}-intl")
+        PIHOLE_WEB_DEPS=(lighttpd "${phpVer}-common" "${phpVer}-cgi" "${phpVer}-sqlite3" "${phpVer}-xml" "${phpVer}-intl")
         # Prior to PHP8.0, JSON functionality is provided as dedicated module, required by Pi-hole AdminLTE: https://www.php.net/manual/json.installation.php
-    if [[ "${phpInsNewer}" != true || "${phpInsMajor}" -lt 8 ]]; then
+        if [[ -z "${phpInsMajor}" || "${phpInsMajor}" -lt 8 ]]; then
             PIHOLE_WEB_DEPS+=("${phpVer}-json")
         fi
         # The Web server user,
@@ -388,7 +318,7 @@ if is_command apt-get ; then
             return 0
         }
 
-# If apt-get is not found, check for rpm to see if it's a Red Hat family OS
+    # If apt-get is not found, check for rpm.
     elif is_command rpm ; then
         # Then check if dnf or yum is the package manager
         if is_command dnf ; then
@@ -397,15 +327,27 @@ elif is_command rpm ; then
             PKG_MANAGER="yum"
         fi
 
-    # These variable names match the ones in the Debian family. See above for an explanation of what they are for.
+        # These variable names match the ones for apt-get. See above for an explanation of what they are for.
         PKG_INSTALL=("${PKG_MANAGER}" install -y)
         PKG_COUNT="${PKG_MANAGER} check-update | egrep '(.i686|.x86|.noarch|.arm|.src)' | wc -l"
-    INSTALLER_DEPS=(git iproute newt procps-ng which chkconfig bind-utils)
-    PIHOLE_DEPS=(cronie curl findutils nmap-ncat sudo unzip libidn2 psmisc sqlite libcap lsof)
+        OS_CHECK_DEPS=(grep bind-utils)
+        INSTALLER_DEPS=(git iproute newt procps-ng which chkconfig ca-certificates)
+        PIHOLE_DEPS=(cronie curl findutils sudo unzip libidn2 psmisc sqlite libcap nmap-ncat)
         PIHOLE_WEB_DEPS=(lighttpd lighttpd-fastcgi php-common php-cli php-pdo php-xml php-json php-intl)
         LIGHTTPD_USER="lighttpd"
         LIGHTTPD_GROUP="lighttpd"
         LIGHTTPD_CFG="lighttpd.conf.fedora"
+
+    # If neither apt-get or yum/dnf package managers were found
+    else
+        # we cannot install required packages
+        printf "  %b No supported package manager found\\n" "${CROSS}"
+        # so exit the installer
+        exit
+    fi
+}
+
+select_rpm_php(){
     # If the host OS is Fedora,
     if grep -qiE 'fedora|fedberry' /etc/redhat-release; then
         # all required packages should be available by default with the latest fedora release
@@ -478,10 +420,7 @@ elif is_command rpm ; then
                         exit 1
                     fi
                 fi
-        fi
-    fi
-    else
-        # Warn user of unsupported version of Fedora or CentOS
+            fi    # Warn user of unsupported version of Fedora or CentOS
             if ! whiptail --defaultno --title "Unsupported RPM based distribution" --yesno "Would you like to continue installation on an unsupported RPM based distribution?\\n\\nPlease ensure the following packages have been installed manually:\\n\\n- lighttpd\\n- lighttpd-fastcgi\\n- PHP version 7+" "${r}" "${c}"; then
                 printf "  %b Aborting installation due to unsupported RPM based distribution\\n" "${CROSS}"
                 exit
@@ -489,13 +428,6 @@ elif is_command rpm ; then
                 printf "  %b Continuing installation with unsupported RPM based distribution\\n" "${INFO}"
             fi
         fi
-
-# If neither apt-get or yum/dnf package managers were found
-else
-    # it's not an OS we can support,
-    printf "  %b OS distribution not supported\\n" "${CROSS}"
-    # so exit the installer
-    exit
     fi
 }
 
@@ -582,7 +514,7 @@ update_repo() {
     git stash --all --quiet &> /dev/null || true # Okay for stash failure
     git clean --quiet --force -d || true # Okay for already clean directory
     # Pull the latest commits
-    git pull --quiet &> /dev/null || return $?
+    git pull --no-rebase --quiet &> /dev/null || return $?
     # Check current branch. If it is master, then reset to the latest available tag.
     # In case extra commits have been added after tagging/release (i.e in case of metadata updates/README.MD tweaks)
     curBranch=$(git rev-parse --abbrev-ref HEAD)
@@ -692,9 +624,17 @@ welcomeDialogs() {
     whiptail --msgbox --backtitle "Plea" --title "Free and open source" "\\n\\nThe Pi-hole is free, but powered by your donations:  https://pi-hole.net/donate/" "${r}" "${c}"
 
     # Explain the need for a static address
-    whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "\\n\\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
+    if whiptail --defaultno --backtitle "Initiating network interface" --title "Static IP Needed" --yesno "\\n\\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
 
-In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." "${r}" "${c}"
+IMPORTANT: If you have not already done so, you must ensure that this device has a static IP. Either through DHCP reservation, or by manually assigning one. Depending on your operating system, there are many ways to achieve this.
+
+Choose yes to indicate that you have understood this message, and wish to continue" "${r}" "${c}"; then
+        #Nothing to do, continue
+        echo
+    else
+        printf "  %b Installer exited at static IP message.\\n" "${INFO}"
+        exit 1
+    fi
 }
 
 # A function that lets the user pick an interface to use with Pi-hole
@@ -734,7 +674,7 @@ chooseInterface() {
         # Feed the available interfaces into this while loop
         done <<< "${availableInterfaces}"
         # The whiptail command that will be run, stored in a variable
-        chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface (press space to toggle selection)" "${r}" "${c}" "${interfaceCount}")
+        chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface (press space to toggle selection)" "${r}" "${c}" 6)
         # Now run the command using the interfaces saved into the array
         chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) || \
         # If the user chooses Cancel, exit
@@ -776,9 +716,8 @@ testIPv6() {
     fi
 }
 
-# A dialog for showing the user about IPv6 blocking
-useIPv6dialog() {
-    # Determine the IPv6 address used for blocking
+find_IPv6_information() {
+    # Detects IPv6 address used for communication to WAN addresses.
     IPV6_ADDRESSES=($(ip -6 address | grep 'scope global' | awk '{print $2}'))
 
     # For each address in the array above, determine the type of IPv6 address it is
@@ -798,89 +737,60 @@ useIPv6dialog() {
         # set the IPv6 address to the ULA address
         IPV6_ADDRESS="${ULA_ADDRESS}"
         # Show this info to the user
-        printf "  %b Found IPv6 ULA address, using it for blocking IPv6 ads\\n" "${INFO}"
+        printf "  %b Found IPv6 ULA address\\n" "${INFO}"
     # Otherwise, if the GUA_ADDRESS has a value,
     elif [[ ! -z "${GUA_ADDRESS}" ]]; then
         # Let the user know
-        printf "  %b Found IPv6 GUA address, using it for blocking IPv6 ads\\n" "${INFO}"
+        printf "  %b Found IPv6 GUA address\\n" "${INFO}"
         # And assign it to the global variable
         IPV6_ADDRESS="${GUA_ADDRESS}"
     # If none of those work,
     else
-        # explain that IPv6 blocking will not be used
-        printf "  %b Unable to find IPv6 ULA/GUA address, IPv6 adblocking will not be enabled\\n" "${INFO}"
+        printf "  %b Unable to find IPv6 ULA/GUA address\\n" "${INFO}"
         # So set the variable to be empty
         IPV6_ADDRESS=""
     fi
-
-    # If the IPV6_ADDRESS contains a value
-    if [[ ! -z "${IPV6_ADDRESS}" ]]; then
-        # Display that IPv6 is supported and will be used
-        whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$IPV6_ADDRESS will be used to block ads." "${r}" "${c}"
-    fi
 }
 
-# A function to check if we should use IPv4 and/or IPv6 for blocking ads
-use4andor6() {
-    # Named local variables
-    local useIPv4
-    local useIPv6
-    # Let user choose IPv4 and/or IPv6 via a checklist
-    cmd=(whiptail --separate-output --checklist "Select Protocols (press space to toggle selection)" "${r}" "${c}" 2)
-    # In an array, show the options available:
-    # IPv4 (on by default)
-    options=(IPv4 "Block ads over IPv4" on
-    # or IPv6 (on by default if available)
-    IPv6 "Block ads over IPv6" on)
-    # In a variable, show the choices available; exit if Cancel is selected
-    choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty) || { printf "  %bCancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"; exit 1; }
-    # For each choice available,
-    for choice in ${choices}
-    do
-        # Set the values to true
-        case ${choice} in
-        IPv4  )   useIPv4=true;;
-        IPv6  )   useIPv6=true;;
-        esac
-    done
-    # If IPv4 is to be used,
-    if [[ "${useIPv4}" ]]; then
-        # Run our function to get the information we need
+# A function to collect IPv4 and IPv6 information of the device
+collect_v4andv6_information() {
     find_IPv4_information
-        getStaticIPv4Settings
-        setStaticIPv4
-    fi
-    # If IPv6 is to be used,
-    if [[ "${useIPv6}" ]]; then
-        # Run our function to get this information
-        useIPv6dialog
-    fi
     # Echo the information to the user
     printf "  %b IPv4 address: %s\\n" "${INFO}" "${IPV4_ADDRESS}"
-    printf "  %b IPv6 address: %s\\n" "${INFO}" "${IPV6_ADDRESS}"
-    # If neither protocol is selected,
-    if [[ ! "${useIPv4}" ]] && [[ ! "${useIPv6}" ]]; then
-        # Show an error in red
-        printf "  %bError: Neither IPv4 or IPv6 selected%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"
-        # and exit with an error
-        exit 1
+    # if `dhcpcd` is used offer to set this as static IP for the device
+    if [[ -f "/etc/dhcpcd.conf" ]]; then
+        # configure networking via dhcpcd
+        getStaticIPv4Settings
     fi
+    find_IPv6_information
+    printf "  %b IPv6 address: %s\\n" "${INFO}" "${IPV6_ADDRESS}"
 }
 
 getStaticIPv4Settings() {
     # Local, named variables
     local ipSettingsCorrect
+    local DHCPChoice
     # Ask if the user wants to use DHCP settings as their static IP
     # This is useful for users that are using DHCP reservations; then we can just use the information gathered via our functions
-    if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
-          IP address:    ${IPV4_ADDRESS}
-          Gateway:       ${IPv4gw}" "${r}" "${c}"; then
+    DHCPChoice=$(whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --menu --separate-output "Do you want to use your current network settings as a static address? \\n
+          IP address:    ${IPV4_ADDRESS} \\n
+          Gateway:       ${IPv4gw} \\n" "${r}" "${c}" 3\
+          "Yes" "Set static IP using current values" \
+          "No" "Set static IP using custom values" \
+          "Skip" "I will set a static IP later, or have already done so" 3>&2 2>&1 1>&3) || \
+          { printf "  %bCancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"; exit 1; }
+
+    case ${DHCPChoice} in
+        "Yes")
         # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
         whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
         If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
         It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." "${r}" "${c}"
         # Nothing else to do since the variables are already set above
-    else
+        setDHCPCD
+        ;;
+
+        "No")
         # Otherwise, we need to ask the user to input their desired settings.
         # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
         # Start a loop to let the user enter their information with the chance to go back and edit it if necessary
@@ -909,8 +819,9 @@ It is also possible to use a DHCP reservation, but if you are going to do that,
                     ipSettingsCorrect=False
                 fi
             done
-    # End the if statement for DHCP vs. static
-    fi
+        setDHCPCD
+        ;;
+    esac
 }
 
 # Configure networking via dhcpcd
@@ -933,93 +844,6 @@ setDHCPCD() {
     fi
 }
 
-# Configure networking ifcfg-xxxx file found at /etc/sysconfig/network-scripts/
-# This function requires the full path of an ifcfg file passed as an argument
-setIFCFG() {
-    # Local, named variables
-    local IFCFG_FILE
-    local IPADDR
-    local CIDR
-    IFCFG_FILE=$1
-    printf -v IPADDR "%s" "${IPV4_ADDRESS%%/*}"
-    # Check if the desired IP is already set
-    if grep -Eq "${IPADDR}(\\b|\\/)" "${IFCFG_FILE}"; then
-        printf "  %b Static IP already configured\\n" "${INFO}"
-    else
-        # Otherwise, put the IP in variables without the CIDR notation
-        printf -v CIDR "%s" "${IPV4_ADDRESS##*/}"
-        # Backup existing interface configuration:
-        cp -p "${IFCFG_FILE}" "${IFCFG_FILE}".pihole.orig
-        # Build Interface configuration file using the GLOBAL variables we have
-        {
-        echo "# Configured via Pi-hole installer"
-        echo "DEVICE=$PIHOLE_INTERFACE"
-        echo "BOOTPROTO=none"
-        echo "ONBOOT=yes"
-        echo "IPADDR=$IPADDR"
-        echo "PREFIX=$CIDR"
-        echo "GATEWAY=$IPv4gw"
-        echo "DNS1=$PIHOLE_DNS_1"
-        echo "DNS2=$PIHOLE_DNS_2"
-        echo "USERCTL=no"
-        }> "${IFCFG_FILE}"
-        chmod 644 "${IFCFG_FILE}"
-        chown root:root "${IFCFG_FILE}"
-        # Use ip to immediately set the new address
-        ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}"
-        # If NetworkMangler command line interface exists and ready to mangle,
-        if is_command nmcli && nmcli general status &> /dev/null; then
-            # Tell NetworkManagler to read our new sysconfig file
-            nmcli con load "${IFCFG_FILE}" > /dev/null
-        fi
-        # Show a warning that the user may need to restart
-        printf "  %b Set IP address to %s\\n  You may need to restart after the install is complete\\n" "${TICK}" "${IPV4_ADDRESS%%/*}"
-    fi
-}
-
-setStaticIPv4() {
-    # Local, named variables
-    local IFCFG_FILE
-    local CONNECTION_NAME
-
-    # If a static interface is already configured, we are done.
-    if [[ -r "/etc/sysconfig/network/ifcfg-${PIHOLE_INTERFACE}" ]]; then
-        if grep -q '^BOOTPROTO=.static.' "/etc/sysconfig/network/ifcfg-${PIHOLE_INTERFACE}"; then
-            return 0
-        fi
-    fi
-    # For the Debian family, if dhcpcd.conf exists then we can just configure using DHCPD.
-    if [[ -f "/etc/dhcpcd.conf" ]]; then
-        setDHCPCD
-        return 0
-    fi
-    # If a DHCPCD config file was not found, check for an ifcfg config file based on the interface name
-    if [[ -f "/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}" ]];then
-        # If it exists, then we can configure using IFCFG
-        IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}
-        setIFCFG "${IFCFG_FILE}"
-        return 0
-    fi
-    # If an ifcfg config does not exists for the interface name, search for one based on the connection name via network manager
-    if is_command nmcli && nmcli general status &> /dev/null; then
-        CONNECTION_NAME=$(nmcli dev show "${PIHOLE_INTERFACE}" | grep 'GENERAL.CONNECTION' | cut -d: -f2 | sed 's/^System//' | xargs | tr ' ' '_')
-        IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${CONNECTION_NAME}
-        if [[ -f "${IFCFG_FILE}" ]];then
-            # If it exists,
-            setIFCFG "${IFCFG_FILE}"
-            return 0
-        else
-            printf "  %b Warning: sysconfig network script not found. Creating ${IFCFG_FILE}\\n" "${INFO}"
-            touch "${IFCFG_FILE}"
-            setIFCFG "${IFCFG_FILE}"
-            return 0
-        fi
-    fi
-    # If previous conditions failed, show an error and exit
-    printf "  %b Warning: Unable to locate configuration file to set static IPv4 address\\n" "${INFO}"
-    exit 1
-}
-
 # Check an IP address to see if it is a valid one
 valid_ip() {
     # Local, named variables
@@ -1032,7 +856,7 @@ valid_ip() {
     # Regex matching an optional port (starting with '#') range of 1-65536
     local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
     # Build a full IPv4 regex from the above subexpressions
-    local regex="^${ipv4elem}\.${ipv4elem}\.${ipv4elem}\.${ipv4elem}${portelem}$"
+    local regex="^${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}${portelem}$"
 
     # Evaluate the regex, and return the result
     [[ $ip =~ ${regex} ]]
@@ -1335,8 +1159,10 @@ version_check_dnsmasq() {
     local dnsmasq_pihole_id_string="addn-hosts=/etc/pihole/gravity.list"
     local dnsmasq_pihole_id_string2="# Dnsmasq config for Pi-hole's FTLDNS"
     local dnsmasq_original_config="${PI_HOLE_LOCAL_REPO}/advanced/dnsmasq.conf.original"
-    local dnsmasq_pihole_01_snippet="${PI_HOLE_LOCAL_REPO}/advanced/01-pihole.conf"
-    local dnsmasq_pihole_01_location="/etc/dnsmasq.d/01-pihole.conf"
+    local dnsmasq_pihole_01_source="${PI_HOLE_LOCAL_REPO}/advanced/01-pihole.conf"
+    local dnsmasq_pihole_01_target="/etc/dnsmasq.d/01-pihole.conf"
+    local dnsmasq_rfc6761_06_source="${PI_HOLE_LOCAL_REPO}/advanced/06-rfc6761.conf"
+    local dnsmasq_rfc6761_06_target="/etc/dnsmasq.d/06-rfc6761.conf"
 
     # If the dnsmasq config file exists
     if [[ -f "${dnsmasq_conf}" ]]; then
@@ -1365,44 +1191,48 @@ version_check_dnsmasq() {
         printf "%b  %b No dnsmasq.conf found... restoring default dnsmasq.conf...\\n" "${OVER}"  "${TICK}"
     fi
 
-    printf "  %b Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..." "${INFO}"
+    printf "  %b Installing %s..." "${INFO}" "${dnsmasq_pihole_01_target}"
     # Check to see if dnsmasq directory exists (it may not due to being a fresh install and dnsmasq no longer being a dependency)
     if [[ ! -d "/etc/dnsmasq.d"  ]];then
         install -d -m 755 "/etc/dnsmasq.d"
     fi
     # Copy the new Pi-hole DNS config file into the dnsmasq.d directory
-    install -D -m 644 -T "${dnsmasq_pihole_01_snippet}" "${dnsmasq_pihole_01_location}"
-    printf "%b  %b Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf\\n" "${OVER}"  "${TICK}"
+    install -D -m 644 -T "${dnsmasq_pihole_01_source}" "${dnsmasq_pihole_01_target}"
+    printf "%b  %b Installed %s\n" "${OVER}"  "${TICK}" "${dnsmasq_pihole_01_target}"
     # Replace our placeholder values with the GLOBAL DNS variables that we populated earlier
     # First, swap in the interface to listen on,
-    sed -i "s/@INT@/$PIHOLE_INTERFACE/" "${dnsmasq_pihole_01_location}"
+    sed -i "s/@INT@/$PIHOLE_INTERFACE/" "${dnsmasq_pihole_01_target}"
     if [[ "${PIHOLE_DNS_1}" != "" ]]; then
         # then swap in the primary DNS server.
-        sed -i "s/@DNS1@/$PIHOLE_DNS_1/" "${dnsmasq_pihole_01_location}"
+        sed -i "s/@DNS1@/$PIHOLE_DNS_1/" "${dnsmasq_pihole_01_target}"
     else
         # Otherwise, remove the line which sets DNS1.
-        sed -i '/^server=@DNS1@/d' "${dnsmasq_pihole_01_location}"
+        sed -i '/^server=@DNS1@/d' "${dnsmasq_pihole_01_target}"
     fi
     # Ditto if DNS2 is not empty
     if [[ "${PIHOLE_DNS_2}" != "" ]]; then
-        sed -i "s/@DNS2@/$PIHOLE_DNS_2/" "${dnsmasq_pihole_01_location}"
+        sed -i "s/@DNS2@/$PIHOLE_DNS_2/" "${dnsmasq_pihole_01_target}"
     else
-        sed -i '/^server=@DNS2@/d' "${dnsmasq_pihole_01_location}"
+        sed -i '/^server=@DNS2@/d' "${dnsmasq_pihole_01_target}"
     fi
 
     # Set the cache size
-	sed -i "s/@CACHE_SIZE@/$CACHE_SIZE/" ${dnsmasq_pihole_01_location}
+    sed -i "s/@CACHE_SIZE@/$CACHE_SIZE/" "${dnsmasq_pihole_01_target}"
 
     sed -i 's/^#conf-dir=\/etc\/dnsmasq.d$/conf-dir=\/etc\/dnsmasq.d/' "${dnsmasq_conf}"
 
     # If the user does not want to enable logging,
     if [[ "${QUERY_LOGGING}" == false ]] ; then
         # disable it by commenting out the directive in the DNS config file
-        sed -i 's/^log-queries/#log-queries/' "${dnsmasq_pihole_01_location}"
+        sed -i 's/^log-queries/#log-queries/' "${dnsmasq_pihole_01_target}"
     else
         # Otherwise, enable it by uncommenting the directive in the DNS config file
-        sed -i 's/^#log-queries/log-queries/' "${dnsmasq_pihole_01_location}"
+        sed -i 's/^#log-queries/log-queries/' "${dnsmasq_pihole_01_target}"
     fi
+
+    printf "  %b Installing %s..." "${INFO}" "${dnsmasq_rfc6761_06_source}"
+    install -D -m 644 -T "${dnsmasq_rfc6761_06_source}" "${dnsmasq_rfc6761_06_target}"
+    printf "%b  %b Installed %s\n" "${OVER}"  "${TICK}" "${dnsmasq_rfc6761_06_target}"
 }
 
 # Clean an existing installation to prepare for upgrade/reinstall
@@ -1469,10 +1299,10 @@ installConfigs() {
     echo "${DNS_SERVERS}" > "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
     chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
 
-    # Install empty file if it does not exist
+    # Install template file if it does not exist
     if [[ ! -r "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" ]]; then
         install -d -m 0755 ${PI_HOLE_CONFIG_DIR}
-        if ! install -o pihole -m 664 /dev/null "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" &>/dev/null; then
+        if ! install -T -o pihole -m 664 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.conf" "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" &>/dev/null; then
             printf "  %bError: Unable to initialize configuration file %s/pihole-FTL.conf\\n" "${COL_LIGHT_RED}" "${PI_HOLE_CONFIG_DIR}"
             return 1
         fi
@@ -1493,18 +1323,18 @@ installConfigs() {
             # make it and set the owners
             install -d -m 755 -o "${USER}" -g root /etc/lighttpd
         # Otherwise, if the config file already exists
-        elif [[ -f "/etc/lighttpd/lighttpd.conf" ]]; then
+        elif [[ -f "${lighttpdConfig}" ]]; then
             # back up the original
-            mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
+            mv "${lighttpdConfig}"{,.orig}
         fi
         # and copy in the config file Pi-hole needs
-        install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/advanced/${LIGHTTPD_CFG} /etc/lighttpd/lighttpd.conf
+        install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/advanced/${LIGHTTPD_CFG} "${lighttpdConfig}"
         # Make sure the external.conf file exists, as lighttpd v1.4.50 crashes without it
         touch /etc/lighttpd/external.conf
         chmod 644 /etc/lighttpd/external.conf
         # If there is a custom block page in the html/pihole directory, replace 404 handler in lighttpd config
         if [[ -f "${PI_HOLE_BLOCKPAGE_DIR}/custom.php" ]]; then
-            sed -i 's/^\(server\.error-handler-404\s*=\s*\).*$/\1"pihole\/custom\.php"/' /etc/lighttpd/lighttpd.conf
+            sed -i 's/^\(server\.error-handler-404\s*=\s*\).*$/\1"\/pihole\/custom\.php"/' "${lighttpdConfig}"
         fi
         # Make the directories if they do not exist and set the owners
         mkdir -p /run/lighttpd
@@ -1651,9 +1481,6 @@ disable_resolved_stublistener() {
 }
 
 update_package_cache() {
-    # Running apt-get update/upgrade with minimal output can cause some issues with
-    # requiring user input (e.g password for phpmyadmin see #218)
-
     # Update package cache on apt based OSes. Do this every time since
     # it's quick and packages can be updated at any time.
 
@@ -1665,8 +1492,14 @@ update_package_cache() {
         printf "%b  %b %s\\n" "${OVER}" "${TICK}" "${str}"
     else
         # Otherwise, show an error and exit
+
+        # In case we used apt-get and apt is also available, we use this as recommendation as we have seen it
+        # gives more user-friendly (interactive) advice
+        if [[ ${PKG_MANAGER} == "apt-get" ]] && is_command apt ; then
+            UPDATE_PKG_CACHE="apt update"
+        fi
         printf "%b  %b %s\\n" "${OVER}" "${CROSS}" "${str}"
-        printf "  %bError: Unable to update package cache. Please try \"%s\"%b" "${COL_LIGHT_RED}" "${UPDATE_PKG_CACHE}" "${COL_NC}"
+        printf "  %bError: Unable to update package cache. Please try \"%s\"%b\\n" "${COL_LIGHT_RED}" "sudo ${UPDATE_PKG_CACHE}" "${COL_NC}"
         return 1
     fi
 }
@@ -1693,20 +1526,7 @@ notify_package_updates_available() {
     fi
 }
 
-# This counter is outside of install_dependent_packages so that it can count the number of times the function is called.
-counter=0
-
 install_dependent_packages() {
-    # Local, named variables should be used here, especially for an iterator
-    # Add one to the counter
-    counter=$((counter+1))
-    if [[ "${counter}" == 1 ]]; then
-        # On the first loop, print a special message
-        printf "  %b Installer Dependency checks...\\n" "${INFO}"
-    else
-        # On all subsequent loops, print a generic message.
-        printf "  %b Main Dependency checks...\\n" "${INFO}"
-    fi
 
     # Install packages passed in via argument array
     # No spinner - conflicts with set -e
@@ -1731,6 +1551,8 @@ install_dependent_packages() {
         # If there's anything to install, install everything in the list.
         if [[ "${#installArray[@]}" -gt 0 ]]; then
             test_dpkg_lock
+            # Running apt-get install with minimal output can cause some issues with
+            # requiring user input (e.g password for phpmyadmin see #218)
             printf "  %b Processing %s install(s) for: %s, please wait...\\n" "${INFO}" "${PKG_MANAGER}" "${installArray[*]}"
             printf '%*s\n' "$columns" '' | tr " " -;
             "${PKG_INSTALL[@]}" "${installArray[@]}"
@@ -1909,7 +1731,7 @@ finalExports() {
     # If the setup variable file exists,
     if [[ -e "${setupVars}" ]]; then
         # update the variables in the file
-        sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1\b/d;/PIHOLE_DNS_2\b/d;/QUERY_LOGGING/d;/INSTALL_WEB_SERVER/d;/INSTALL_WEB_INTERFACE/d;/LIGHTTPD_ENABLED/d;/CACHE_SIZE/d;' "${setupVars}"
+        sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1\b/d;/PIHOLE_DNS_2\b/d;/QUERY_LOGGING/d;/INSTALL_WEB_SERVER/d;/INSTALL_WEB_INTERFACE/d;/LIGHTTPD_ENABLED/d;/CACHE_SIZE/d;/DNS_FQDN_REQUIRED/d;/DNS_BOGUS_PRIV/d;/DNSMASQ_LISTENING/d;' "${setupVars}"
     fi
     # echo the information to the user
     {
@@ -1923,6 +1745,9 @@ finalExports() {
         echo "INSTALL_WEB_INTERFACE=${INSTALL_WEB_INTERFACE}"
         echo "LIGHTTPD_ENABLED=${LIGHTTPD_ENABLED}"
         echo "CACHE_SIZE=${CACHE_SIZE}"
+        echo "DNS_FQDN_REQUIRED=${DNS_FQDN_REQUIRED:-true}"
+        echo "DNS_BOGUS_PRIV=${DNS_BOGUS_PRIV:-true}"
+        echo "DNSMASQ_LISTENING=${DNSMASQ_LISTENING:-local}"
     }>> "${setupVars}"
     chmod 644 "${setupVars}"
 
@@ -1970,27 +1795,6 @@ installLogrotate() {
     printf "%b  %b %s\\n" "${OVER}" "${TICK}" "${str}"
 }
 
-# At some point in the future this list can be pruned, for now we'll need it to ensure updates don't break.
-# Refactoring of install script has changed the name of a couple of variables. Sort them out here.
-accountForRefactor() {
-    sed -i 's/piholeInterface/PIHOLE_INTERFACE/g' "${setupVars}"
-    sed -i 's/IPv4_address/IPV4_ADDRESS/g' "${setupVars}"
-    sed -i 's/IPv4addr/IPV4_ADDRESS/g' "${setupVars}"
-    sed -i 's/IPv6_address/IPV6_ADDRESS/g' "${setupVars}"
-    sed -i 's/piholeIPv6/IPV6_ADDRESS/g' "${setupVars}"
-    sed -i 's/piholeDNS1/PIHOLE_DNS_1/g' "${setupVars}"
-    sed -i 's/piholeDNS2/PIHOLE_DNS_2/g' "${setupVars}"
-    sed -i 's/^INSTALL_WEB=/INSTALL_WEB_INTERFACE=/' "${setupVars}"
-    # Add 'INSTALL_WEB_SERVER', if its not been applied already: https://github.com/pi-hole/pi-hole/pull/2115
-    if ! grep -q '^INSTALL_WEB_SERVER=' ${setupVars}; then
-        local webserver_installed=false
-        if grep -q '^INSTALL_WEB_INTERFACE=true' ${setupVars}; then
-            webserver_installed=true
-        fi
-        echo -e "INSTALL_WEB_SERVER=$webserver_installed" >> "${setupVars}"
-    fi
-}
-
 # Install base files and web interface
 installPihole() {
     # If the user wants to install the Web interface,
@@ -2021,10 +1825,6 @@ installPihole() {
             fi
         fi
     fi
-    # For updates and unattended install.
-    if [[ "${useUpdateVars}" == true ]]; then
-        accountForRefactor
-    fi
     # Install base files and web interface
     if ! installScripts; then
         printf "  %b Failure in dependent script copy function.\\n" "${CROSS}"
@@ -2042,8 +1842,10 @@ installPihole() {
     fi
     # Install the cron file
     installCron
+
     # Install the logrotate file
-    installLogrotate
+    installLogrotate || true
+
     # Check if dnsmasq is present. If so, disable it and back up any possible
     # config file
     disable_dnsmasq
@@ -2061,7 +1863,7 @@ checkSelinux() {
     local CURRENT_SELINUX
     local SELINUX_ENFORCING=0
     # Check for SELinux configuration file and getenforce command
-    if [[ -f /etc/selinux/config ]] && command -v getenforce &> /dev/null; then
+    if [[ -f /etc/selinux/config ]] && is_command getenforce; then
         # Check the default SELinux mode
         DEFAULT_SELINUX=$(awk -F= '/^SELINUX=/ {print $2}' /etc/selinux/config)
         case "${DEFAULT_SELINUX,,}" in
@@ -2107,7 +1909,7 @@ displayFinalMessage() {
     if [[ "${#1}" -gt 0 ]] ; then
         # set the password to the first argument.
         pwstring="$1"
-    elif [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) -gt 0 ]]; then
+    elif [[ $(grep 'WEBPASSWORD' -c "${setupVars}") -gt 0 ]]; then
         # Else if the password exists from previous setup, we'll load it later
         pwstring="unchanged"
     else
@@ -2128,9 +1930,7 @@ Your Admin Webpage login password is ${pwstring}"
 IPv4:	${IPV4_ADDRESS%/*}
 IPv6:	${IPV6_ADDRESS:-"Not Configured"}
 
-If you set a new IP address, you should restart the Pi.
-
-The install log is in /etc/pihole.
+If you have not done so already, the above IP should be set to static.
 
 ${additional}" "${r}" "${c}"
 }
@@ -2149,7 +1949,7 @@ update_dialogs() {
         strAdd="You will be updated to the latest version."
     fi
     opt2a="Reconfigure"
-    opt2b="This will reset your Pi-hole and allow you to enter new settings."
+    opt2b="Resets Pi-hole and allows re-selecting settings."
 
     # Display the information to the user
     UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\\n\\nWe have detected an existing install.\\n\\nPlease choose from the following options: \\n($strAdd)" "${r}" "${c}" 2 \
@@ -2244,7 +2044,7 @@ checkout_pull_branch() {
     # Data in the repositories is public anyway so we can make it readable by everyone (+r to keep executable permission if already set by git)
     chmod -R a+rX "${directory}"
 
-    git_pull=$(git pull || return 1)
+    git_pull=$(git pull --no-rebase || return 1)
 
     if [[ "$git_pull" == *"up-to-date"* ]]; then
         printf "  %b %s\\n" "${INFO}" "${git_pull}"
@@ -2295,7 +2095,6 @@ clone_or_update_repos() {
 # shellcheck disable=SC2120
 FTLinstall() {
     # Local, named variables
-    local latesttag
     local str="Downloading and Installing FTL"
     printf "  %b %s..." "${INFO}" "${str}"
 
@@ -2334,8 +2133,6 @@ FTLinstall() {
 
             # Before stopping FTL, we download the macvendor database
             curl -sSL "https://ftl.pi-hole.net/macvendor.db" -o "${PI_HOLE_CONFIG_DIR}/macvendor.db" || true
-            chmod 644 "${PI_HOLE_CONFIG_DIR}/macvendor.db"
-            chown pihole:pihole "${PI_HOLE_CONFIG_DIR}/macvendor.db"
 
             # Stop pihole-FTL service if available
             stop_service pihole-FTL &> /dev/null
@@ -2368,7 +2165,7 @@ FTLinstall() {
 
 disable_dnsmasq() {
     # dnsmasq can now be stopped and disabled if it exists
-    if which dnsmasq &> /dev/null; then
+    if is_command dnsmasq; then
         if check_service_active "dnsmasq";then
             printf "  %b FTL can now resolve DNS Queries without dnsmasq running separately\\n" "${INFO}"
             stop_service dnsmasq
@@ -2481,7 +2278,7 @@ FTLcheckUpdate() {
     printf "  %b Checking for existing FTL binary...\\n" "${INFO}"
 
     local ftlLoc
-    ftlLoc=$(which pihole-FTL 2>/dev/null)
+    ftlLoc=$(command -v pihole-FTL 2>/dev/null)
 
     local ftlBranch
 
@@ -2498,7 +2295,7 @@ FTLcheckUpdate() {
     local localSha1
 
     # if dnsmasq exists and is running at this point, force reinstall of FTL Binary
-    if which dnsmasq &> /dev/null; then
+    if is_command dnsmasq; then
         if check_service_active "dnsmasq";then
             return 0
         fi
@@ -2519,7 +2316,7 @@ FTLcheckUpdate() {
             # We already have a pihole-FTL binary downloaded.
             # Alt branches don't have a tagged version against them, so just confirm the checksum of the local vs remote to decide whether we download or not
             remoteSha1=$(curl -sSL --fail "https://ftl.pi-hole.net/${ftlBranch}/${binary}.sha1" | cut -d ' ' -f 1)
-            localSha1=$(sha1sum "$(which pihole-FTL)" | cut -d ' ' -f 1)
+            localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
 
             if [[ "${remoteSha1}" != "${localSha1}" ]]; then
                 printf "  %b Checksums do not match, downloading from ftl.pi-hole.net.\\n" "${INFO}"
@@ -2549,7 +2346,7 @@ FTLcheckUpdate() {
                 printf "  %b Latest FTL Binary already installed (%s). Confirming Checksum...\\n" "${INFO}" "${FTLlatesttag}"
 
                 remoteSha1=$(curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${FTLversion%$'\r'}/${binary}.sha1" | cut -d ' ' -f 1)
-                localSha1=$(sha1sum "$(which pihole-FTL)" | cut -d ' ' -f 1)
+                localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
 
                 if [[ "${remoteSha1}" != "${localSha1}" ]]; then
                     printf "  %b Corruption detected...\\n" "${INFO}"
@@ -2640,8 +2437,30 @@ main() {
         fi
     fi
 
-    # Check for supported distribution
-    distro_check
+    # Check for supported package managers so that we may install dependencies
+    package_manager_detect
+
+    # Notify user of package availability
+    notify_package_updates_available
+
+    # Install packages necessary to perform os_check
+    printf "  %b Checking for / installing Required dependencies for OS Check...\\n" "${INFO}"
+    install_dependent_packages "${OS_CHECK_DEPS[@]}"
+
+    # Check that the installed OS is officially supported - display warning if not
+    os_check
+
+    # Install packages used by this installation script
+    printf "  %b Checking for / installing Required dependencies for this install script...\\n" "${INFO}"
+    install_dependent_packages "${INSTALLER_DEPS[@]}"
+
+    #In case of RPM based distro, select the proper PHP version
+    if [[ "$PKG_MANAGER" == "yum" || "$PKG_MANAGER" == "dnf" ]] ; then
+        select_rpm_php
+    fi
+
+    # Check if SELinux is Enforcing
+    checkSelinux
 
     # If the setup variable file exists,
     if [[ -f "${setupVars}" ]]; then
@@ -2658,19 +2477,6 @@ main() {
         fi
     fi
 
-    # Start the installer
-    # Notify user of package availability
-    notify_package_updates_available
-
-    # Install packages used by this installation script
-    install_dependent_packages "${INSTALLER_DEPS[@]}"
-
-    # Check that the installed OS is officially supported - display warning if not
-    os_check
-
-    # Check if SELinux is Enforcing
-    checkSelinux
-
     if [[ "${useUpdateVars}" == false ]]; then
         # Display welcome dialogs
         welcomeDialogs
@@ -2680,12 +2486,12 @@ main() {
         get_available_interfaces
         # Find interfaces and let the user choose one
         chooseInterface
+        # find IPv4 and IPv6 information of the device
+        collect_v4andv6_information
         # Decide what upstream DNS Servers to use
         setDNS
         # Give the user a choice of blocklists to include in their install. Or not.
         chooseBlocklists
-        # Let the user decide if they want to block ads over IPv4 and/or IPv6
-        use4andor6
         # Let the user decide if they want the web interface to be installed automatically
         setAdminFlag
         # Let the user decide if they want query logging enabled...
@@ -2717,6 +2523,8 @@ main() {
         dep_install_list+=("${PIHOLE_WEB_DEPS[@]}")
     fi
 
+    # Install packages used by the actual software
+    printf "  %b Checking for / installing Required dependencies for Pi-hole software...\\n" "${INFO}"
     install_dependent_packages "${dep_install_list[@]}"
     unset dep_install_list
 
@@ -2756,7 +2564,7 @@ main() {
         # Add password to web UI if there is none
         pw=""
         # If no password is set,
-        if [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) == 0 ]] ; then
+        if [[ $(grep 'WEBPASSWORD' -c "${setupVars}") == 0 ]] ; then
             # generate a random password
             pw=$(tr -dc _A-Z-a-z-0-9 < /dev/urandom | head -c 8)
             # shellcheck disable=SC1091
@@ -2821,7 +2629,7 @@ main() {
         printf "  %b You may now configure your devices to use the Pi-hole as their DNS server\\n" "${INFO}"
         [[ -n "${IPV4_ADDRESS%/*}" ]] && printf "  %b Pi-hole DNS (IPv4): %s\\n" "${INFO}" "${IPV4_ADDRESS%/*}"
         [[ -n "${IPV6_ADDRESS}" ]] && printf "  %b Pi-hole DNS (IPv6): %s\\n" "${INFO}" "${IPV6_ADDRESS}"
-        printf "  %b If you set a new IP address, please restart the server running the Pi-hole\\n" "${INFO}"
+        printf "  %b If you have not done so already, the above IP should be set to static.\\n" "${INFO}"
         INSTALL_TYPE="Installation"
     else
         INSTALL_TYPE="Update"

automated install/uninstall.sh

@@ -42,8 +42,8 @@ source "${PI_HOLE_FILES_DIR}/automated install/basic-install.sh"
 # setupVars set in basic-install.sh
 source "${setupVars}"
 
-# distro_check() sourced from basic-install.sh
-distro_check
+# package_manager_detect() sourced from basic-install.sh
+package_manager_detect
 
 # Install packages used by the Pi-hole
 DEPS=("${INSTALLER_DEPS[@]}" "${PIHOLE_DEPS[@]}")
@@ -145,6 +145,7 @@ removeNoPurge() {
 
     ${SUDO} rm -f /etc/dnsmasq.d/adList.conf &> /dev/null
     ${SUDO} rm -f /etc/dnsmasq.d/01-pihole.conf &> /dev/null
+    ${SUDO} rm -f /etc/dnsmasq.d/06-rfc6761.conf &> /dev/null
     ${SUDO} rm -rf /var/log/*pihole* &> /dev/null
     ${SUDO} rm -rf /etc/pihole/ &> /dev/null
     ${SUDO} rm -rf /etc/.pihole/ &> /dev/null

gravity.sh

@@ -15,8 +15,6 @@ export LC_ALL=C
 
 coltable="/opt/pihole/COL_TABLE"
 source "${coltable}"
-regexconverter="/opt/pihole/wildcard_regex_converter.sh"
-source "${regexconverter}"
 # shellcheck disable=SC1091
 source "/etc/.pihole/advanced/Scripts/database_migration/gravity-db.sh"
 
@@ -77,7 +75,12 @@ fi
 
 # Generate new sqlite3 file from schema template
 generate_gravity_database() {
-  sqlite3 "${1}" < "${gravityDBschema}"
+  if ! sqlite3 "${gravityDBfile}" < "${gravityDBschema}"; then
+    echo -e "   ${CROSS} Unable to create ${gravityDBfile}"
+    return 1
+  fi
+  chown pihole:pihole "${gravityDBfile}"
+  chmod g+w "${piholeDir}" "${gravityDBfile}"
 }
 
 # Copy data from old to new database file and swap them
@@ -122,7 +125,7 @@ gravity_swap_databases() {
   gravityBlocks=$(stat --format "%b" ${gravityDBfile})
   # Only keep the old database if available disk space is at least twice the size of the existing gravity.db.
   # Better be safe than sorry...
-  if [ "${availableBlocks}" -gt "$(("${gravityBlocks}" * 2))" ] && [ -f "${gravityDBfile}" ]; then
+  if [ "${availableBlocks}" -gt "$((gravityBlocks * 2))" ] && [ -f "${gravityDBfile}" ]; then
     echo -e "  ${TICK} The old database remains available."
     mv "${gravityDBfile}" "${gravityOLDfile}"
   else
@@ -250,7 +253,7 @@ database_adlist_number() {
     return;
   fi
 
-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${num_lines}" "${num_invalid}" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${num_source_lines}" "${num_invalid}" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
   status="$?"
 
   if [[ "${status}" -ne 0 ]]; then
@@ -263,9 +266,12 @@ database_adlist_number() {
 database_adlist_status() {
   # Only try to set the status when this field exists in the gravity database
   if ! gravity_column_exists "adlist" "status"; then
+    echo "Gravity status column is not found!"
     return;
   fi
 
+  echo "Gravity status column found and set to ${2} (ID ${1})"
+
   output=$( { printf ".timeout 30000\\nUPDATE adlist SET status = %i WHERE id = %i;\\n" "${2}" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
   status="$?"
 
@@ -281,7 +287,10 @@ migrate_to_database() {
   if [ ! -e "${gravityDBfile}" ]; then
     # Create new database file - note that this will be created in version 1
     echo -e "  ${INFO} Creating new gravity database"
-    generate_gravity_database "${gravityDBfile}"
+    if ! generate_gravity_database; then
+      echo -e "   ${CROSS} Error creating new gravity database. Please contact support."
+      return 1
+    fi
 
     # Check if gravity database needs to be updated
     upgrade_gravityDB "${gravityDBfile}" "${piholeDir}"
@@ -396,14 +405,12 @@ gravity_DownloadBlocklists() {
   )"
 
   local str="Pulling blocklist source list into range"
-
-  if [[ -n "${sources[*]}" ]] && [[ -n "${sourceDomains[*]}" ]]; then
   echo -e "${OVER}  ${TICK} ${str}"
-  else
-    echo -e "${OVER}  ${CROSS} ${str}"
+
+  if [[ -z "${sources[*]}" ]] || [[ -z "${sourceDomains[*]}" ]]; then
     echo -e "  ${INFO} No source list found, or it is empty"
     echo ""
-    return 1
+    unset sources
   fi
 
   local url domain agent cmd_ext str target compression
@@ -505,8 +512,9 @@ gravity_DownloadBlocklists() {
   gravity_Blackbody=true
 }
 
-total_num=0
-num_lines=0
+# num_target_lines does increase for every correctly added domain in pareseList()
+num_target_lines=0
+num_source_lines=0
 num_invalid=0
 parseList() {
   local adlistID="${1}" src="${2}" target="${3}" incorrect_lines
@@ -518,18 +526,20 @@ parseList() {
   # Find (up to) five domains containing invalid characters (see above)
   incorrect_lines="$(sed -e "/[^a-zA-Z0-9.\_-]/!d" "${src}" | head -n 5)"
 
-  local num_target_lines num_correct_lines num_invalid
+  local num_target_lines_new num_correct_lines
   # Get number of lines in source file
-  num_lines="$(grep -c "^" "${src}")"
-  # Get number of lines in destination file
-  num_target_lines="$(grep -c "^" "${target}")"
-  num_correct_lines="$(( num_target_lines-total_num ))"
-  total_num="$num_target_lines"
-  num_invalid="$(( num_lines-num_correct_lines ))"
+  num_source_lines="$(grep -c "^" "${src}")"
+  # Get the new number of lines in destination file
+  num_target_lines_new="$(grep -c "^" "${target}")"
+  # Number of new correctly added lines
+  num_correct_lines="$(( num_target_lines_new-num_target_lines ))"
+  # Upate number of lines in target file
+  num_target_lines="$num_target_lines_new"
+  num_invalid="$(( num_source_lines-num_correct_lines ))"
   if [[ "${num_invalid}" -eq 0 ]]; then
-    echo "  ${INFO} Analyzed ${num_lines} domains"
+    echo "  ${INFO} Analyzed ${num_source_lines} domains"
   else
-    echo "  ${INFO} Analyzed ${num_lines} domains, ${num_invalid} domains invalid!"
+    echo "  ${INFO} Analyzed ${num_source_lines} domains, ${num_invalid} domains invalid!"
   fi
 
   # Display sample of invalid lines if we found some
@@ -595,6 +605,10 @@ gravity_DownloadBlocklistFromUrl() {
       if [[ $(dig "${domain}" | grep "NXDOMAIN" -c) -ge 1 ]]; then
         blocked=true
       fi;;
+    "NODATA")
+      if [[ $(dig "${domain}" | grep "NOERROR" -c) -ge 1 ]] && [[ -z $(dig +short "${domain}") ]]; then
+         blocked=true
+      fi;;
     "NULL"|*)
       if [[ $(dig "${domain}" +short | grep "0.0.0.0" -c) -ge 1 ]]; then
         blocked=true
@@ -688,7 +702,7 @@ gravity_DownloadBlocklistFromUrl() {
     else
       echo -e "  ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}"
       # Manually reset these two numbers because we do not call parseList here
-      num_lines=0
+      num_source_lines=0
       num_invalid=0
       database_adlist_number "${adlistID}"
       database_adlist_status "${adlistID}" "4"
@@ -847,6 +861,49 @@ gravity_Cleanup() {
   fi
 }
 
+database_recovery() {
+  local result
+  local str="Checking integrity of existing gravity database"
+  local option="${1}"
+  echo -ne "  ${INFO} ${str}..."
+  if result="$(pihole-FTL sqlite3 "${gravityDBfile}" "PRAGMA integrity_check" 2>&1)"; then
+    echo -e "${OVER}  ${TICK} ${str} - no errors found"
+
+    str="Checking foreign keys of existing gravity database"
+    echo -ne "  ${INFO} ${str}..."
+    if result="$(pihole-FTL sqlite3 "${gravityDBfile}" "PRAGMA foreign_key_check" 2>&1)"; then
+      echo -e "${OVER}  ${TICK} ${str} - no errors found"
+      if [[ "${option}" != "force" ]]; then
+        return
+      fi
+    else
+      echo -e "${OVER}  ${CROSS} ${str} - errors found:"
+      while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
+    fi
+  else
+    echo -e "${OVER}  ${CROSS} ${str} - errors found:"
+    while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
+  fi
+
+  str="Trying to recover existing gravity database"
+  echo -ne "  ${INFO} ${str}..."
+  # We have to remove any possibly existing recovery database or this will fail
+  rm -f "${gravityDBfile}.recovered" > /dev/null 2>&1
+  if result="$(pihole-FTL sqlite3 "${gravityDBfile}" ".recover" | pihole-FTL sqlite3 "${gravityDBfile}.recovered" 2>&1)"; then
+    echo -e "${OVER}  ${TICK} ${str} - success"
+    mv "${gravityDBfile}" "${gravityDBfile}.old"
+    mv "${gravityDBfile}.recovered" "${gravityDBfile}"
+    echo -ne " ${INFO} ${gravityDBfile} has been recovered"
+    echo -ne " ${INFO} The old ${gravityDBfile} has been moved to ${gravityDBfile}.old"
+  else
+    echo -e "${OVER}  ${CROSS} ${str} - the following errors happened:"
+    while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
+    echo -e "  ${CROSS} Recovery failed. Try \"pihole -r recreate\" instead."
+    exit 1
+  fi
+  echo ""
+}
+
 helpFunc() {
   echo "Usage: pihole -g
 Update domains from blocklists specified in adlists.list
@@ -857,10 +914,37 @@ Options:
   exit 0
 }
 
+repairSelector() {
+  case "$1" in
+    "recover") recover_database=true;;
+    "recreate") recreate_database=true;;
+    *) echo "Usage: pihole -g -r {recover,recreate}
+Attempt to repair gravity database
+
+Available options:
+  pihole -g -r recover        Try to recover a damaged gravity database file.
+                              Pi-hole tries to restore as much as possible
+                              from a corrupted gravity database.
+
+  pihole -g -r recover force  Pi-hole will run the recovery process even when
+                              no damage is detected. This option is meant to be
+                              a last resort. Recovery is a fragile task
+                              consuming a lot of resources and shouldn't be
+                              performed unnecessarily.
+
+  pihole -g -r recreate       Create a new gravity database file from scratch.
+                              This will remove your existing gravity database
+                              and create a new file from scratch. If you still
+                              have the migration backup created when migrating
+                              to Pi-hole v5.0, Pi-hole will import these files."
+    exit 0;;
+  esac
+}
+
 for var in "$@"; do
   case "${var}" in
     "-f" | "--force" ) forceDelete=true;;
-    "-r" | "--recreate" ) recreate_database=true;;
+    "-r" | "--repair" ) repairSelector "$3";;
     "-h" | "--help" ) helpFunc;;
   esac
 done
@@ -874,7 +958,7 @@ fi
 gravity_Trap
 
 if [[ "${recreate_database:-}" == true ]]; then
-  str="Restoring from migration backup"
+  str="Recreating gravity database from migration backup"
   echo -ne "${INFO} ${str}..."
   rm "${gravityDBfile}"
   pushd "${piholeDir}" > /dev/null || exit
@@ -883,8 +967,15 @@ if [[ "${recreate_database:-}" == true ]]; then
   echo -e "${OVER}  ${TICK} ${str}"
 fi
 
+if [[ "${recover_database:-}" == true ]]; then
+  database_recovery "$4"
+fi
+
 # Move possibly existing legacy files to the gravity database
-migrate_to_database
+if ! migrate_to_database; then
+  echo -e "   ${CROSS} Unable to migrate to database. Please contact support."
+  exit 1
+fi
 
 if [[ "${forceDelete:-}" == true ]]; then
   str="Deleting existing list cache"
@@ -895,14 +986,21 @@ if [[ "${forceDelete:-}" == true ]]; then
 fi
 
 # Gravity downloads blocklists next
-gravity_CheckDNSResolutionAvailable
+if ! gravity_CheckDNSResolutionAvailable; then
+  echo -e "   ${CROSS} Can not complete gravity update, no DNS is available. Please contact support."
+  exit 1
+fi
+
 gravity_DownloadBlocklists
 
 # Create local.list
 gravity_generateLocalList
 
 # Migrate rest of the data from old to new database
-gravity_swap_databases
+if ! gravity_swap_databases; then
+  echo -e "   ${CROSS} Unable to create database. Please contact support."
+  exit 1
+fi
 
 # Update gravity timestamp
 update_gravity_timestamp

pihole

@@ -71,8 +71,7 @@ reconfigurePiholeFunc() {
 }
 
 updateGravityFunc() {
-  "${PI_HOLE_SCRIPT_DIR}"/gravity.sh "$@"
-  exit $?
+  exec "${PI_HOLE_SCRIPT_DIR}"/gravity.sh "$@"
 }
 
 queryFunc() {
@@ -95,8 +94,7 @@ uninstallFunc() {
 
 versionFunc() {
   shift
-  "${PI_HOLE_SCRIPT_DIR}"/version.sh "$@"
-  exit 0
+  exec "${PI_HOLE_SCRIPT_DIR}"/version.sh "$@"
 }
 
 # Get PID of main pihole-FTL process
@@ -225,8 +223,7 @@ Time:
       fi
 
       local str="Pi-hole Disabled"
-      sed -i "/BLOCKING_ENABLED=/d" "${setupVars}"
-      echo "BLOCKING_ENABLED=false" >> "${setupVars}"
+      sed -i "s/^BLOCKING_ENABLED=true/BLOCKING_ENABLED=false/" "${setupVars}"
     fi
   else
     # Enable Pi-hole
@@ -238,11 +235,10 @@ Time:
     echo -e "  ${INFO} Enabling blocking"
     local str="Pi-hole Enabled"
 
-    sed -i "/BLOCKING_ENABLED=/d" "${setupVars}"
-    echo "BLOCKING_ENABLED=true" >> "${setupVars}"
+    sed -i "s/^BLOCKING_ENABLED=false/BLOCKING_ENABLED=true/" "${setupVars}"
   fi
 
-  restartDNS reload
+  restartDNS reload-lists
 
   echo -e "${OVER}  ${TICK} ${str}"
 }
@@ -285,27 +281,29 @@ Options:
 }
 
 analyze_ports() {
+  local lv4 lv6 port=${1}
   # FTL is listening at least on at least one port when this
   # function is getting called
-  echo -e "  ${TICK} DNS service is listening"
   # Check individual address family/protocol combinations
   # For a healthy Pi-hole, they should all be up (nothing printed)
-  if grep -q "IPv4.*UDP" <<< "${1}"; then
+  lv4="$(ss --ipv4 --listening --numeric --tcp --udp src :${port})"
+  if grep -q "udp " <<< "${lv4}"; then
       echo -e "     ${TICK} UDP (IPv4)"
   else
       echo -e "     ${CROSS} UDP (IPv4)"
   fi
-  if grep -q "IPv4.*TCP" <<< "${1}"; then
+  if grep -q "tcp " <<< "${lv4}"; then
       echo -e "     ${TICK} TCP (IPv4)"
   else
       echo -e "     ${CROSS} TCP (IPv4)"
   fi
-  if grep -q "IPv6.*UDP" <<< "${1}"; then
+  lv6="$(ss --ipv6 --listening --numeric --tcp --udp src :${port})"
+  if grep -q "udp " <<< "${lv6}"; then
       echo -e "     ${TICK} UDP (IPv6)"
   else
       echo -e "     ${CROSS} UDP (IPv6)"
   fi
-  if grep -q "IPv6.*TCP" <<< "${1}"; then
+  if grep -q "tcp " <<< "${lv6}"; then
       echo -e "     ${TICK} TCP (IPv6)"
   else
       echo -e "     ${CROSS} TCP (IPv6)"
@@ -314,19 +312,31 @@ analyze_ports() {
 }
 
 statusFunc() {
-  # Determine if there is a pihole service is listening on port 53
-  local listening
-  listening="$(lsof -Pni:53)"
-  if grep -q "pihole" <<< "${listening}"; then
-    if [[ "${1}" != "web" ]]; then
-      analyze_ports "${listening}"
-    fi
+  # Determine if there is pihole-FTL service is listening
+  local listening pid port
+
+  pid="$(getFTLPID)"
+  if [[ "$pid" -eq "-1" ]]; then
+    case "${1}" in
+      "web") echo "-1";;
+      *) echo -e "  ${CROSS} DNS service is NOT running";;
+    esac
+    return 0
   else
+    #get the port pihole-FTL is listening on by using FTL's telnet API
+    port="$(echo ">dns-port >quit" | nc 127.0.0.1 4711)"
+    if [[ "${port}" == "0" ]]; then
       case "${1}" in
         "web") echo "-1";;
         *) echo -e "  ${CROSS} DNS service is NOT listening";;
       esac
       return 0
+    else
+      if [[ "${1}" != "web" ]]; then
+        echo -e "  ${TICK} FTL is listening on port ${port}"
+        analyze_ports "${port}"
+      fi
+    fi
   fi
 
   # Determine if Pi-hole's blocking is enabled
@@ -339,18 +349,19 @@ statusFunc() {
   elif grep -q "BLOCKING_ENABLED=true" /etc/pihole/setupVars.conf;  then
     # Configs are set
     case "${1}" in
-      "web") echo 1;;
+      "web") echo "$port";;
       *) echo -e "  ${TICK} Pi-hole blocking is enabled";;
     esac
   else
     # No configs were found
     case "${1}" in
-      "web") echo 99;;
+      "web") echo -2;;
       *) echo -e "  ${INFO} Pi-hole blocking will be enabled";;
     esac
     # Enable blocking
     "${PI_HOLE_BIN_DIR}"/pihole enable
   fi
+
 }
 
 tailFunc() {
@@ -369,7 +380,7 @@ tailFunc() {
   # Color everything else as gray
   tail -f /var/log/pihole.log | grep --line-buffered "${1}" | sed -E \
     -e "s,($(date +'%b %d ')| dnsmasq\[[0-9]*\]),,g" \
-    -e "s,(.*(blacklisted |gravity blocked ).* is (0.0.0.0|::|NXDOMAIN).*),${COL_RED}&${COL_NC}," \
+    -e "s,(.*(blacklisted |gravity blocked ).*),${COL_RED}&${COL_NC}," \
     -e "s,.*(query\\[A|DHCP).*,${COL_NC}&${COL_NC}," \
     -e "s,.*,${COL_GRAY}&${COL_NC},"
   exit 0
@@ -399,34 +410,24 @@ Branches:
 }
 
 tricorderFunc() {
+  local tricorder_token
   if [[ ! -p "/dev/stdin" ]]; then
     echo -e "  ${INFO} Please do not call Tricorder directly"
     exit 1
   fi
 
-  if ! (echo > /dev/tcp/tricorder.pi-hole.net/9998) >/dev/null 2>&1; then
-    echo -e "  ${CROSS} Unable to connect to Pi-hole's Tricorder server"
+  tricorder_token=$(curl --silent --fail --show-error --upload-file "-" https://tricorder.pi-hole.net/upload < /dev/stdin 2>&1)
+  if [[ "${tricorder_token}" != "https://tricorder.pi-hole.net/"* ]]; then
+      echo -e "${CROSS} uploading failed, contact Pi-hole support for assistance."
+      # Log curl error (if available)
+      if [ -n "${tricorder_token}" ]; then
+          echo -e "${INFO} Error message: ${COL_RED}${tricorder_token}${COL_NC}\\n"
+          tricorder_token=""
+      fi
       exit 1
   fi
-
-  if command -v openssl &> /dev/null; then
-    openssl s_client -quiet -connect tricorder.pi-hole.net:9998 2> /dev/null < /dev/stdin
-    exit "$?"
-  else
-    echo -e "  ${INFO} ${COL_YELLOW}Security Notice${COL_NC}: ${COL_WHITE}openssl${COL_NC} is not installed
-       Your debug log will be transmitted unencrypted via plain-text
-       There is a possibility that this could be intercepted by a third party
-       If you wish to cancel, press Ctrl-C to exit within 10 seconds"
-    secs="10"
-    while [[ "$secs" -gt "0" ]]; do
-       echo -ne "."
-       sleep 1
-       : $((secs--))
-    done
-    echo " "
-    nc tricorder.pi-hole.net 9999 < /dev/stdin
-    exit "$?"
-  fi
+  echo "Upload successful, your token is: ${COL_GREEN}${tricorder_token}${COL_NC}"
+  exit 0
 }
 
 updateCheckFunc() {

supportedos.txt

@@ -1,5 +0,0 @@
-Raspbian=9,10
-Ubuntu=16,18,20
-Debian=9,10
-Fedora=32,33
-CentOS=7,8

test/_centos_7.Dockerfile

@@ -1,4 +1,5 @@
 FROM centos:7
+RUN yum install -y git
 
 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
@@ -12,5 +13,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_centos_8.Dockerfile

@@ -1,4 +1,5 @@
 FROM centos:8
+RUN yum install -y git
 
 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
@@ -12,5 +13,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_debian_10.Dockerfile

@@ -12,5 +12,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_debian_11.Dockerfile

@@ -1,4 +1,4 @@
-FROM fedora:32
+FROM buildpack-deps:bullseye-scm
 
 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
@@ -12,5 +12,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_debian_9.Dockerfile

@@ -12,5 +12,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_fedora_33.Dockerfile

@@ -1,4 +1,5 @@
 FROM fedora:33
+RUN dnf install -y git
 
 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
@@ -12,5 +13,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_fedora_34.Dockerfile

@@ -0,0 +1,18 @@
+FROM fedora:34
+RUN dnf install -y git
+
+ENV GITDIR /etc/.pihole
+ENV SCRIPTDIR /opt/pihole
+
+RUN mkdir -p $GITDIR $SCRIPTDIR /etc/pihole
+ADD . $GITDIR
+RUN cp $GITDIR/advanced/Scripts/*.sh $GITDIR/gravity.sh $GITDIR/pihole $GITDIR/automated\ install/*.sh $SCRIPTDIR/
+ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$SCRIPTDIR
+
+RUN true && \
+    chmod +x $SCRIPTDIR/*
+
+ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
+
+#sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_ubuntu_16.Dockerfile

@@ -12,5 +12,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_ubuntu_18.Dockerfile

@@ -12,5 +12,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_ubuntu_20.Dockerfile

@@ -13,5 +13,6 @@ RUN true && \
     chmod +x $SCRIPTDIR/*
 
 ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
 
 #sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/_ubuntu_21.Dockerfile

@@ -0,0 +1,18 @@
+FROM buildpack-deps:hirsute-scm
+
+ENV GITDIR /etc/.pihole
+ENV SCRIPTDIR /opt/pihole
+
+RUN mkdir -p $GITDIR $SCRIPTDIR /etc/pihole
+ADD . $GITDIR
+RUN cp $GITDIR/advanced/Scripts/*.sh $GITDIR/gravity.sh $GITDIR/pihole $GITDIR/automated\ install/*.sh $SCRIPTDIR/
+ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$SCRIPTDIR
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN true && \
+    chmod +x $SCRIPTDIR/*
+
+ENV PH_TEST true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
+
+#sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/conftest.py

@@ -1,10 +1,9 @@
 import pytest
 import testinfra
+import testinfra.backend.docker
+import subprocess
 from textwrap import dedent
 
-check_output = testinfra.get_backend(
-    "local://"
-).get_module("Command").check_output
 
 SETUPVARS = {
     'PIHOLE_INTERFACE': 'eth99',
@@ -12,85 +11,42 @@ SETUPVARS = {
     'PIHOLE_DNS_2': '4.2.2.2'
 }
 
+IMAGE = 'pytest_pihole:test_container'
+
 tick_box = "[\x1b[1;32m\u2713\x1b[0m]"
 cross_box = "[\x1b[1;31m\u2717\x1b[0m]"
 info_box = "[i]"
 
 
-@pytest.fixture
-def Pihole(Docker):
-    '''
-    used to contain some script stubbing, now pretty much an alias.
-    Also provides bash as the default run function shell
-    '''
+# Monkeypatch sh to bash, if they ever support non hard code /bin/sh this can go away
+# https://github.com/pytest-dev/pytest-testinfra/blob/master/testinfra/backend/docker.py
 def run_bash(self, command, *args, **kwargs):
     cmd = self.get_command(command, *args)
     if self.user is not None:
         out = self.run_local(
-                "docker exec -u %s %s /bin/bash -c %s",
-                self.user, self.name, cmd)
+            "docker exec -u %s %s /bin/bash -c %s", self.user, self.name, cmd
+        )
     else:
-            out = self.run_local(
-                "docker exec %s /bin/bash -c %s", self.name, cmd)
+        out = self.run_local("docker exec %s /bin/bash -c %s", self.name, cmd)
     out.command = self.encode(cmd)
     return out
 
-    funcType = type(Docker.run)
-    Docker.run = funcType(run_bash, Docker)
-    return Docker
+
+testinfra.backend.docker.DockerBackend.run = run_bash
 
 
 @pytest.fixture
-def Docker(request, args, image, cmd):
-    '''
-    combine our fixtures into a docker run command and setup finalizer to
-    cleanup
-    '''
-    assert 'docker' in check_output('id'), "Are you in the docker group?"
-    docker_run = "docker run {} {} {}".format(args, image, cmd)
-    docker_id = check_output(docker_run)
+def host():
+    # run a container
+    docker_id = subprocess.check_output(
+        ['docker', 'run', '-t', '-d', '--cap-add=ALL', IMAGE]).decode().strip()
 
-    def teardown():
-        check_output("docker rm -f %s", docker_id)
-    request.addfinalizer(teardown)
+    # return a testinfra connection to the container
+    docker_host = testinfra.get_host("docker://" + docker_id)
 
-    docker_container = testinfra.get_backend("docker://" + docker_id)
-    docker_container.id = docker_id
-    return docker_container
-
-
-@pytest.fixture
-def args(request):
-    '''
-    -t became required when tput began being used
-    '''
-    return '-t -d'
-
-
-@pytest.fixture(params=[
-    'test_container'
-])
-def tag(request):
-    '''
-    consumed by image to make the test matrix
-    '''
-    return request.param
-
-
-@pytest.fixture()
-def image(request, tag):
-    '''
-    built by test_000_build_containers.py
-    '''
-    return 'pytest_pihole:{}'.format(tag)
-
-
-@pytest.fixture()
-def cmd(request):
-    '''
-    default to doing nothing by tailing null, but don't exit
-    '''
-    return 'tail -f /dev/null'
+    yield docker_host
+    # at the end of the test suite, destroy the container
+    subprocess.check_call(['docker', 'rm', '-f', docker_id])
 
 
 # Helper functions
@@ -100,7 +56,7 @@ def mock_command(script, args, container):
     in unit tests
     '''
     full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent('''\
+    mock_script = dedent(r'''\
     #!/bin/bash -e
     echo "\$0 \$@" >> /var/log/{script}
     case "\$1" in'''.format(script=script))
@@ -121,13 +77,75 @@ def mock_command(script, args, container):
                                          scriptlog=script))
 
 
+def mock_command_passthrough(script, args, container):
+    '''
+    Per other mock_command* functions, allows intercepting of commands we don't want to run for real
+    in unit tests, however also allows only specific arguments to be mocked. Anything not defined will
+    be passed through to the actual command.
+
+    Example use-case: mocking `git pull` but still allowing `git clone` to work as intended
+    '''
+    orig_script_path = container.check_output('command -v {}'.format(script))
+    full_script_path = '/usr/local/bin/{}'.format(script)
+    mock_script = dedent(r'''\
+    #!/bin/bash -e
+    echo "\$0 \$@" >> /var/log/{script}
+    case "\$1" in'''.format(script=script))
+    for k, v in args.items():
+        case = dedent('''
+        {arg})
+        echo {res}
+        exit {retcode}
+        ;;'''.format(arg=k, res=v[0], retcode=v[1]))
+        mock_script += case
+    mock_script += dedent(r'''
+    *)
+    {orig_script_path} "\$@"
+    ;;'''.format(orig_script_path=orig_script_path))
+    mock_script += dedent('''
+    esac''')
+    container.run('''
+    cat <<EOF> {script}\n{content}\nEOF
+    chmod +x {script}
+    rm -f /var/log/{scriptlog}'''.format(script=full_script_path,
+                                         content=mock_script,
+                                         scriptlog=script))
+
+
+def mock_command_run(script, args, container):
+    '''
+    Allows for setup of commands we don't really want to have to run for real
+    in unit tests
+    '''
+    full_script_path = '/usr/local/bin/{}'.format(script)
+    mock_script = dedent(r'''\
+    #!/bin/bash -e
+    echo "\$0 \$@" >> /var/log/{script}
+    case "\$1 \$2" in'''.format(script=script))
+    for k, v in args.items():
+        case = dedent('''
+        \"{arg}\")
+        echo {res}
+        exit {retcode}
+        ;;'''.format(arg=k, res=v[0], retcode=v[1]))
+        mock_script += case
+    mock_script += dedent('''
+    esac''')
+    container.run('''
+    cat <<EOF> {script}\n{content}\nEOF
+    chmod +x {script}
+    rm -f /var/log/{scriptlog}'''.format(script=full_script_path,
+                                         content=mock_script,
+                                         scriptlog=script))
+
+
 def mock_command_2(script, args, container):
     '''
     Allows for setup of commands we don't really want to have to run for real
     in unit tests
     '''
     full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent('''\
+    mock_script = dedent(r'''\
     #!/bin/bash -e
     echo "\$0 \$@" >> /var/log/{script}
     case "\$1 \$2" in'''.format(script=script))

test/requirements.txt

@@ -1,6 +1,6 @@
-docker-compose==1.23.2
-pytest==4.3.0
-pytest-xdist==1.26.1
-pytest-cov==2.6.1
-testinfra==1.19.0
-tox==3.7.0
+docker-compose
+pytest
+pytest-xdist
+pytest-cov
+pytest-testinfra
+tox

test/test_centos_7_support.py

@@ -5,56 +5,59 @@ from .conftest import (
 )
 
 
-def test_php_upgrade_default_optout_centos_eq_7(Pihole):
+def test_php_upgrade_default_optout_centos_eq_7(host):
     '''
     confirms the default behavior to opt-out of installing PHP7 from REMI
     '''
-    distro_check = Pihole.run('''
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                   'Deprecated PHP may be in use.')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_upgrade_user_optout_centos_eq_7(Pihole):
+def test_php_upgrade_user_optout_centos_eq_7(host):
     '''
     confirms installer behavior when user opt-out of installing PHP7 from REMI
     (php not currently installed)
     '''
     # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '1')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                   'Deprecated PHP may be in use.')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_upgrade_user_optin_centos_eq_7(Pihole):
+def test_php_upgrade_user_optin_centos_eq_7(host):
     '''
     confirms installer behavior when user opt-in to installing PHP7 from REMI
     (php not currently installed)
     '''
     # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '0')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
-    assert 'opt-out' not in distro_check.stdout
+    assert 'opt-out' not in package_manager_detect.stdout
     expected_stdout = info_box + (' Enabling Remi\'s RPM repository '
                                   '(https://rpms.remirepo.net)')
-    assert expected_stdout in distro_check.stdout
+    assert expected_stdout in package_manager_detect.stdout
     expected_stdout = tick_box + (' Remi\'s RPM repository has '
                                   'been enabled for PHP7')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert remi_package.is_installed

test/test_centos_8_support.py

@@ -5,61 +5,64 @@ from .conftest import (
 )
 
 
-def test_php_upgrade_default_continue_centos_gte_8(Pihole):
+def test_php_upgrade_default_continue_centos_gte_8(host):
     '''
     confirms the latest version of CentOS continues / does not optout
     (should trigger on CentOS7 only)
     '''
-    distro_check = Pihole.run('''
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     unexpected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS.'
                                     ' Deprecated PHP may be in use.')
-    assert unexpected_stdout not in distro_check.stdout
+    assert unexpected_stdout not in package_manager_detect.stdout
     # ensure remi was not installed on latest CentOS
-    remi_package = Pihole.package('remi-release')
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_upgrade_user_optout_skipped_centos_gte_8(Pihole):
+def test_php_upgrade_user_optout_skipped_centos_gte_8(host):
     '''
     confirms installer skips user opt-out of installing PHP7 from REMI on
     latest CentOS (should trigger on CentOS7 only)
     (php not currently installed)
     '''
     # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '1')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     unexpected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS.'
                                     ' Deprecated PHP may be in use.')
-    assert unexpected_stdout not in distro_check.stdout
+    assert unexpected_stdout not in package_manager_detect.stdout
     # ensure remi was not installed on latest CentOS
-    remi_package = Pihole.package('remi-release')
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_upgrade_user_optin_skipped_centos_gte_8(Pihole):
+def test_php_upgrade_user_optin_skipped_centos_gte_8(host):
     '''
     confirms installer skips user opt-in to installing PHP7 from REMI on
     latest CentOS (should trigger on CentOS7 only)
     (php not currently installed)
     '''
     # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '0')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
-    assert 'opt-out' not in distro_check.stdout
+    assert 'opt-out' not in package_manager_detect.stdout
     unexpected_stdout = info_box + (' Enabling Remi\'s RPM repository '
                                     '(https://rpms.remirepo.net)')
-    assert unexpected_stdout not in distro_check.stdout
+    assert unexpected_stdout not in package_manager_detect.stdout
     unexpected_stdout = tick_box + (' Remi\'s RPM repository has '
                                     'been enabled for PHP7')
-    assert unexpected_stdout not in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert unexpected_stdout not in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed

test/test_centos_common_support.py

@@ -7,114 +7,119 @@ from .conftest import (
 )
 
 
-def test_release_supported_version_check_centos(Pihole):
+def test_release_supported_version_check_centos(host):
     '''
     confirms installer exits on unsupported releases of CentOS
     '''
     # modify /etc/redhat-release to mock an unsupported CentOS release
-    Pihole.run('echo "CentOS Linux release 6.9" > /etc/redhat-release')
-    distro_check = Pihole.run('''
+    host.run('echo "CentOS Linux release 6.9" > /etc/redhat-release')
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = cross_box + (' CentOS 6 is not supported.')
-    assert expected_stdout in distro_check.stdout
+    assert expected_stdout in package_manager_detect.stdout
     expected_stdout = 'Please update to CentOS release 7 or later'
-    assert expected_stdout in distro_check.stdout
+    assert expected_stdout in package_manager_detect.stdout
 
 
-def test_enable_epel_repository_centos(Pihole):
+def test_enable_epel_repository_centos(host):
     '''
     confirms the EPEL package repository is enabled when installed on CentOS
     '''
-    distro_check = Pihole.run('''
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = info_box + (' Enabling EPEL package repository '
                                   '(https://fedoraproject.org/wiki/EPEL)')
-    assert expected_stdout in distro_check.stdout
+    assert expected_stdout in package_manager_detect.stdout
     expected_stdout = tick_box + ' Installed epel-release'
-    assert expected_stdout in distro_check.stdout
-    epel_package = Pihole.package('epel-release')
+    assert expected_stdout in package_manager_detect.stdout
+    epel_package = host.package('epel-release')
     assert epel_package.is_installed
 
 
-def test_php_version_lt_7_detected_upgrade_default_optout_centos(Pihole):
+def test_php_version_lt_7_detected_upgrade_default_optout_centos(host):
     '''
     confirms the default behavior to opt-out of upgrading to PHP7 from REMI
     '''
     # first we will install the default php version to test installer behavior
-    php_install = Pihole.run('yum install -y php')
+    php_install = host.run('yum install -y php')
     assert php_install.rc == 0
-    php_package = Pihole.package('php')
+    php_package = host.package('php')
     default_centos_php_version = php_package.version.split('.')[0]
     if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
         pytest.skip("Test deprecated . Detected default PHP version >= 7")
-    distro_check = Pihole.run('''
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                   'Deprecated PHP may be in use.')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_version_lt_7_detected_upgrade_user_optout_centos(Pihole):
+def test_php_version_lt_7_detected_upgrade_user_optout_centos(host):
     '''
     confirms installer behavior when user opt-out to upgrade to PHP7 via REMI
     '''
     # first we will install the default php version to test installer behavior
-    php_install = Pihole.run('yum install -y php')
+    php_install = host.run('yum install -y php')
     assert php_install.rc == 0
-    php_package = Pihole.package('php')
+    php_package = host.package('php')
     default_centos_php_version = php_package.version.split('.')[0]
     if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
         pytest.skip("Test deprecated . Detected default PHP version >= 7")
     # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '1')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
     expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                   'Deprecated PHP may be in use.')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed
 
 
-def test_php_version_lt_7_detected_upgrade_user_optin_centos(Pihole):
+def test_php_version_lt_7_detected_upgrade_user_optin_centos(host):
     '''
     confirms installer behavior when user opt-in to upgrade to PHP7 via REMI
     '''
     # first we will install the default php version to test installer behavior
-    php_install = Pihole.run('yum install -y php')
+    php_install = host.run('yum install -y php')
     assert php_install.rc == 0
-    php_package = Pihole.package('php')
+    php_package = host.package('php')
     default_centos_php_version = php_package.version.split('.')[0]
     if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
         pytest.skip("Test deprecated . Detected default PHP version >= 7")
     # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, Pihole)
-    distro_check = Pihole.run('''
+    mock_command('whiptail', {'*': ('', '0')}, host)
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     install_dependent_packages PIHOLE_WEB_DEPS[@]
     ''')
     expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                   'Deprecated PHP may be in use.')
-    assert expected_stdout not in distro_check.stdout
+    assert expected_stdout not in package_manager_detect.stdout
     expected_stdout = info_box + (' Enabling Remi\'s RPM repository '
                                   '(https://rpms.remirepo.net)')
-    assert expected_stdout in distro_check.stdout
+    assert expected_stdout in package_manager_detect.stdout
     expected_stdout = tick_box + (' Remi\'s RPM repository has '
                                   'been enabled for PHP7')
-    assert expected_stdout in distro_check.stdout
-    remi_package = Pihole.package('remi-release')
+    assert expected_stdout in package_manager_detect.stdout
+    remi_package = host.package('remi-release')
     assert remi_package.is_installed
-    updated_php_package = Pihole.package('php')
+    updated_php_package = host.package('php')
     updated_php_version = updated_php_package.version.split('.')[0]
     assert int(updated_php_version) == 7

test/test_centos_fedora_common_support.py

@@ -5,7 +5,7 @@ from .conftest import (
 )
 
 
-def mock_selinux_config(state, Pihole):
+def mock_selinux_config(state, host):
     '''
     Creates a mock SELinux config file with expected content
     '''
@@ -13,20 +13,20 @@ def mock_selinux_config(state, Pihole):
     valid_states = ['enforcing', 'permissive', 'disabled']
     assert state in valid_states
     # getenforce returns the running state of SELinux
-    mock_command('getenforce', {'*': (state.capitalize(), '0')}, Pihole)
+    mock_command('getenforce', {'*': (state.capitalize(), '0')}, host)
     # create mock configuration with desired content
-    Pihole.run('''
+    host.run('''
     mkdir /etc/selinux
     echo "SELINUX={state}" > /etc/selinux/config
     '''.format(state=state.lower()))
 
 
-def test_selinux_enforcing_exit(Pihole):
+def test_selinux_enforcing_exit(host):
     '''
     confirms installer prompts to exit when SELinux is Enforcing by default
     '''
-    mock_selinux_config("enforcing", Pihole)
-    check_selinux = Pihole.run('''
+    mock_selinux_config("enforcing", host)
+    check_selinux = host.run('''
     source /opt/pihole/basic-install.sh
     checkSelinux
     ''')
@@ -37,12 +37,12 @@ def test_selinux_enforcing_exit(Pihole):
     assert check_selinux.rc == 1
 
 
-def test_selinux_permissive(Pihole):
+def test_selinux_permissive(host):
     '''
     confirms installer continues when SELinux is Permissive
     '''
-    mock_selinux_config("permissive", Pihole)
-    check_selinux = Pihole.run('''
+    mock_selinux_config("permissive", host)
+    check_selinux = host.run('''
     source /opt/pihole/basic-install.sh
     checkSelinux
     ''')
@@ -51,12 +51,12 @@ def test_selinux_permissive(Pihole):
     assert check_selinux.rc == 0
 
 
-def test_selinux_disabled(Pihole):
+def test_selinux_disabled(host):
     '''
     confirms installer continues when SELinux is Disabled
     '''
-    mock_selinux_config("disabled", Pihole)
-    check_selinux = Pihole.run('''
+    mock_selinux_config("disabled", host)
+    check_selinux = host.run('''
     source /opt/pihole/basic-install.sh
     checkSelinux
     ''')

test/test_fedora_support.py

@@ -1,15 +1,16 @@
-def test_epel_and_remi_not_installed_fedora(Pihole):
+def test_epel_and_remi_not_installed_fedora(host):
     '''
     confirms installer does not attempt to install EPEL/REMI repositories
     on Fedora
     '''
-    distro_check = Pihole.run('''
+    package_manager_detect = host.run('''
     source /opt/pihole/basic-install.sh
-    distro_check
+    package_manager_detect
+    select_rpm_php
     ''')
-    assert distro_check.stdout == ''
+    assert package_manager_detect.stdout == ''
 
-    epel_package = Pihole.package('epel-release')
+    epel_package = host.package('epel-release')
     assert not epel_package.is_installed
-    remi_package = Pihole.package('remi-release')
+    remi_package = host.package('remi-release')
     assert not remi_package.is_installed

test/tox.centos_7.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.centos_8.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.debian_10.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.debian_11.ini

@@ -0,0 +1,8 @@
+[tox]
+envlist = py38
+
+[testenv]
+whitelist_externals = docker
+deps = -rrequirements.txt
+commands = docker build -f _debian_11.Dockerfile -t pytest_pihole:test_container ../
+           pytest {posargs:-vv -n auto} ./test_automated_install.py

test/tox.debian_9.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.fedora_33.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.fedora_34.ini

@@ -1,8 +1,8 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
-commands = docker build -f _fedora_32.Dockerfile -t pytest_pihole:test_container ../
+commands = docker build -f _fedora_34.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_automated_install.py ./test_centos_fedora_common_support.py ./test_fedora_support.py

test/tox.ubuntu_16.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.ubuntu_18.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.ubuntu_20.ini

@@ -1,5 +1,5 @@
 [tox]
-envlist = py37
+envlist = py38
 
 [testenv]
 whitelist_externals = docker

test/tox.ubuntu_21.ini

@@ -0,0 +1,8 @@
+[tox]
+envlist = py38
+
+[testenv]
+whitelist_externals = docker
+deps = -rrequirements.txt
+commands = docker build -f _ubuntu_21.Dockerfile -t pytest_pihole:test_container ../
+           pytest {posargs:-vv -n auto} ./test_automated_install.py