This is the initial step for support of Solidity errors in contract bindings.
As of this change, errors can be decoded, but are not supported in
bindings yet.
Closes#23157
This fixes a bug where gas-related fields of the TransactOpts passed
to transaction methods would be modified, skipping gas estimation for
subsequent transactions.
Co-authored-by: Yondon Fu <yondon.fu@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This doesn't fix all go-critic warnings, just the most serious ones.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* eth,rpc: allow for flag configured timeouts for eth_call
* lint: account for package-local import order
* cr: rename `rpc.calltimeout` to `rpc.evmtimeout`
This removes some code:
- The clique engine calculated the snapshot twice when verifying headers/blocks.
- The method GetBlockHashesFromHash in Header/Block/Lightchain was only used by tests. It
is now removed from the API.
- The method GetTdByHash internally looked up the number before calling GetTd(hash, num).
In many cases, callers already had the number, and used this method just because it has a
shorter name. I have removed the method to make the API surface smaller.
* build: increase thread stack size when running alpine linux
* review feedback: force a stack size of 8M on all linux distribs
* fix missing extldflags
node.Node no longer registers any account manager backends by default,
they need to be registered explicitly.
For ethash-based tests, we actually don't need any accounts in the miner
keystore. Just set the etherbase instead to make mining work. For
clique, the signer account must be in the keystore.
The change also adds interrupt handling in stress tests.
This fixes a data race on worker.current by moving the call to StopPrefetcher
into the main loop.
The commit also contains fixes for two other races in unit tests of unrelated packages.
Go 1.17.2 fixes some miscompilation issues on amd64 and a runtime issue with timers.
While the upgrade is not strictly necessary for go-ethereum right now, it is still good
to be up-to-date.
Fixes#23681
After the fix I get the address 0x6d6d02e83c4ced98204e20126acf27e9d87b8af2 for the
tx mentioned in the ticket, which agrees with etherscan.
This change removes misuses of sync.WaitGroup in BlockChain. Before this change,
block insertion modified the WaitGroup counter in order to ensure that Stop would wait
for pending operations to complete. This was racy and could even lead to crashes
if Stop was called at an unfortunate time. The issue is resolved by adding a specialized
'closable' mutex, which prevents chain modifications after stopping while also
synchronizing writers with each other.
Co-authored-by: Felix Lange <fjl@twurst.com>
This resolves a long-standing TODO. The point of copying the address is
to ensure that all data referenced by types.Transaction is independent of the
data passed into the constructor.
Co-authored-by: Felix Lange <fjl@twurst.com>
The test did not synchronize with per-case goroutines, and thus didn't notice
that some tests were just hanging. This change adds missing synchronization
and fixes the broken tests.
This PR fixes an issue in traceChain, where the statedb Commit operation was performed asynchronously with dereference-operations agains the underlying trie.Database instance. Due to how the reference counting works within the trie database (where parent count is recursively updated when new parents are added), doing dereferencing in the middle of Commit can cause the refcount to become wrong, leading to an inconsistent state.
This was fixed by doing Commit/Deref from the same routine.
* core/types: rm extranous check in test
* core/rawdb: add lightweight types for block logs
* core/rawdb,eth: use lightweight accessor for log filtering
* core/rawdb: add bench for decoding into rlpLogs
This PR implements a new debug method, which I've talked briefly about to some other client developers. It allows the caller to obtain the intermediate state roots for a block (which might be either a canon block or a 'bad' block).
* internal: support optional filter expression for debug.stacks
* internal/debug: fix string regexp
* internal/debug: support searching for line numbers too
* ethclient/gethclient: fix flaky test (due to map key ordering)
* accounts/keystore: fix test failing due to rand collision due to low time resolution on windows
This change introduces 2 new optional methods; `enter()` and `exit()` for js tracers, and makes `step()` optiona. The two new methods are invoked when entering and exiting a call frame (but not invoked for the outermost scope, which has it's own methods). Currently these are the data fields passed to each of them:
enter: type (opcode), from, to, input, gas, value
exit: output, gasUsed, error
The PR also comes with a re-write of the callTracer. As a backup we keep the previous tracing script under the name `callTracerLegacy`. Behaviour of both tracers are equivalent for the most part, although there are some small differences (improvements), where the new tracer is more correct / has more information.
* cmd/devp2p/internal/ethtest: only use eth66 if eth66 is negotiated
* cmd/devp2p/internal/ethtest: switch on concrete type not pointer
* cmd/devp2p/internal/ethtest: switch on concrete type not pointer
This PR ensures that wiping all data associated with a node (apart from its nodekey)
will not generate already used sequence number for the ENRs, since all remote nodes
would reject them until they out-number the previously published largest one.
The big complication with this scheme is that every local update to the ENR can
potentially bump the sequence number by one. In order to ensure that local updates
do not outrun the clock, the sequence number is a millisecond-precision timestamp,
and updates are throttled to occur at most once per millisecond.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change is a rewrite of the freezer code.
When writing ancient chain data to the freezer, the previous version first encoded each
individual item to a temporary buffer, then wrote the buffer. For small item sizes (for
example, in the block hash freezer table), this strategy causes a lot of system calls for
writing tiny chunks of data. It also allocated a lot of temporary []byte buffers.
In the new version, we instead encode multiple items into a re-useable batch buffer, which
is then written to the file all at once. This avoids performing a system call for every
inserted item.
To make the internal batching work, the ancient database API had to be changed. While
integrating this new API in BlockChain.InsertReceiptChain, additional optimizations were
also added there.
Co-authored-by: Felix Lange <fjl@twurst.com>
* remove rpc flags
* remove legacy rpc flags
* remove legacy rpc flags
* remove legacy rpc commands
* (hopefully) fix most of the build errors
* fix build errors
https://app.travis-ci.com/github/ethereum/go-ethereum/jobs/530318686
* cmd/utils: fix syntax error
* empty commit to unbreak travis ci
* fix syntax error
* syntax fixes
* syntax fixes
* fix
fixes "cmd/geth/usage.go:234:7: expected '(', found init (typecheck)"
* fix
* various fixes in usage.go
* various fixes in flags.go
* adds extra space
reverts the spacing to how it was before I resolved the merge conflict
* more fixes in usage.go
* fix
fix for cmd/geth/usage.go:243:17: expected operand, found ':=' (typecheck) in travis
* Update cmd/utils/flags.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
* fix error
fixes these errors:
cmd/utils/flags_legacy.go:21:2: "strings" imported but not used (typecheck)
"strings"
^
cmd/utils/flags_legacy.go:24:2: "github.com/ethereum/go-ethereum/node" imported but not used (typecheck)
"github.com/ethereum/go-ethereum/node"
^
* goimports
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/debug: remove deprecated flags
The removed flags are removed in the main portion of geth, this removes it internally too.
* internal/debug: remove legacy --debug and legacy --backtrace flag
* Update flags.go
Co-authored-by: Martin Holst Swende <martin@swende.se>
Currently, setDefaults overwrites the transaction input value if only input is provided. This causes personal_sendTransaction to estimate the gas based on a transaction with empty data. eth_estimateGas never calls setDefaults so it was unaffected by this.
Currently rpc.BlockNumber is marshalled to JSON as a numeric value, which is
wrong because BlockNumber.UnmarshalJSON() wants it to either be hex-encoded
or string "earliest"/"latest"/"pending". As a result, the call chain
rpc.BlockNumberOrHashWithNumber(123) -> json.Marshal() -> json.Unmarshal()
fails with error "cannot unmarshal object into Go value of type string".
As per benchmark results below, these changes speed up encoding/decoding of
consensus objects a bit.
name old time/op new time/op delta
EncodeRLP/legacy-header-8 384ns ± 1% 331ns ± 3% -13.83% (p=0.000 n=7+8)
EncodeRLP/london-header-8 411ns ± 1% 359ns ± 2% -12.53% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 251ns ± 0% 239ns ± 0% -4.97% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 319ns ± 0% 300ns ± 0% -5.89% (p=0.000 n=8+7)
EncodeRLP/legacy-transaction-8 389ns ± 1% 387ns ± 1% ~ (p=0.099 n=8+8)
EncodeRLP/access-transaction-8 607ns ± 0% 581ns ± 0% -4.26% (p=0.000 n=8+8)
EncodeRLP/1559-transaction-8 627ns ± 0% 606ns ± 1% -3.44% (p=0.000 n=8+8)
DecodeRLP/legacy-header-8 831ns ± 1% 813ns ± 1% -2.20% (p=0.000 n=8+8)
DecodeRLP/london-header-8 824ns ± 0% 804ns ± 1% -2.44% (p=0.000 n=8+7)
* rlp: pass length to byteArrayBytes
This makes it possible to inline byteArrayBytes. For arrays, the length is known
at encoder construction time, so the call to v.Len() can be avoided.
* rlp: avoid IsNil for pointer encoding
It's actually cheaper to use Elem first, because it performs less checks
on the value. If the pointer was nil, the result of Elem is 'invalid'.
* rlp: minor optimizations for slice/array encoding
For empty slices/arrays, we can avoid storing a list header entry in the
encoder buffer. Also avoid doing the tail check at encoding time because
it is already known at encoder construction time.
This PR adds functionality to the evm t8n to calculate ethash difficulty. If the caller does not provide a currentDifficulty, but instead provides the parentTimestamp (well, semi-optional, will default to 0 if not given), and parentDifficulty, we can calculate it for him.
The caller can also provide a parentUncleHash. In most, but not all cases, the parent uncle hash also affects the formula. If no such hash is provided (or, if the empty all-zero hash is provided), it's assumed that there were no uncles.
The new linter version is built with go 1.17 and thus includes the go vet
check for mismatched +build and go:build lines.
Fortunately, no new warnings are reported with this update.
In p2p/dial.go, conn.flags was accessed without using sync/atomic.
This race is fixed by removing the access.
In p2p/enode/iter_test.go, a similar race is resolved by writing the field atomically.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR adds flag to enable InfluxDB v2 (--metrics.influxdbv2), flags for v2-specific features (--metrics.influxdb.token, --metrics.influxdb.bucket), also carries over addition of support for specifying organization (--metrics.influxdb.organization), but still retains backwards compatibility with InfluxDB v1.
* core/rawdb: implement sequential reads in freezer_table
* core/rawdb, ethdb: add sequential reader to db interface
* core/rawdb: lint nitpicks
* core/rawdb: fix some nitpicks
* core/rawdb: fix flaw with deferred reads not being performed
* core/rawdb: better documentation
* internal/ethapi/api: cap highest gas limit by account balance for 1559 fee parameters
* accounts/abi/bind: port gas limit cap for 1559 parameters to simulated backend
* accounts/abi/bind: add test for 1559 gas estimates for the simulated backend
* internal/ethapi/api: fix comment
* accounts/abi/bind/backends, internal/ethapi: unify naming style
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
In many cases, it's desireable to use already-signed transactions as input to the state transition, instead of having the evm sign them internally (for example to use malformed or not-yet-valid transactions). This PR adds support + docs for that feature.
This adds a check to verify that a sender-account does not have code, which means that the codehash is either `emptyCodeHash` _OR_ not present. The latter occurs IFF the sender did not previously exist, a situation which can only occur with zero cost gasprices.
This PR modifies the post-PING-send expectations to both be laxer and stricter: it doesn't care what order the packets arrive, but also verifies that exactly one PING and one PONG is returned.
Ticket #23273 found a flaw where we were unable to sign legacy-transactions
using the external signer, even if we're still on non-london network. That's
fixed in this PR.
Additionally, I found that even when supplying all parameters, it was impossible
to sign a london-transaction on an unsynched node. It's a pretty common usecase
that someone wants to sign a transaction using an unsynced 'vanilla' node,
providing all necessary data. Our setDefaults, however, insisted on checking the
current block against the config. This PR therefore adds a case, so that if both
MaxPriorityFeePerGas and MaxFeePerGas are provided, we accept them as given.
OBS This PR fixes a regression -- on current master, we are unable to sign a
london-transaction unless the node is synched, which may break scenarios where
geth (or clef) is used as a cold wallet.
Fixes#23273
* internal/ethapi: revert + fix properly in al tracer
* internal/ethapi: use toMessage instead of creating new message
* internal/ethapi: remove ineffassign
* core: fix invalid unmarshalling, fix test
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi/api: use hexutil.uint for blockCount parameter instead of int for feeHistory
* return hex value for oldestBlock instead of number
* return uint64 from oracle.resolveBlockRange
* eth/gasprice: fixed test
Co-authored-by: Zsolt Felfoldi <zsfelfoldi@gmail.com>
When processing a transaction with London fork rules, EIP-1559 mandates
checking that the sender must have sufficient balance to cover gas * gasFeeCap.
In the EIP's pseudocode, this check happens after the value transferred by the
transaction has already been deducted. However, in go-ethereum, the balance
has not yet been updated when the check happens, and therefore needs to be
added explicitly.
Co-authored-by: Martin Holst Swende <martin@swende.se>
The encoding of Log and LogForStorage is exactly the same
now. After tracking it down it seems like #17106 changed the
storage schema of logs to be the same as the consensus
encoding.
Support for the legacy format was dropped in #22852 and if
I'm not wrong there's no reason anymore to have these two
equivalent types.
Since the RLP encoding simply contains the first three fields
of Log, we can also avoid creating a temporary struct for
encoding/decoding, and use the rlp:"-" tag in Log instead.
Note: this is an API change in core/types. We decided it's OK
to make this change because LogForStorage is an implementation
detail of go-ethereum and the type has zero uses outside of
package core/types.
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR fixes a false positive PONG 'to' endpoint mismatch seen in hive tests:
got {IP:172.17.0.7 UDP:44025 TCP:44025}, want {IP:172.17.0.7 UDP:44025 TCP:0}
Co-authored-by: Felix Lange <fjl@twurst.com>
Some tests take quite some time during exit, which I think causes
some appveyor fails like this:
https://ci.appveyor.com/project/ethereum/go-ethereum/builds/39511210/job/xhom84eg2e4uulq3
One of the things that seem to take time during exit is waiting
(up to 100ms) for the syncbloom to close. This PR changes it to use
a channel, instead of looping with a 100ms wait.
This also includes some unrelated changes improving the reliability of
eth/fetcher tests, which fail a lot because they are time-dependent.
This commit adds the package gethclient which is similar to the ethclient
and implements some geth specific functionality.
Co-authored-by: Edgar Aroutiounian <edgar.factorial@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes transaction sending in the case where an app using go-ethereum v1.10.4
is talking to a pre-EIP-1559 RPC node. In this case, the eth_maxPriorityFeePerGas
endpoint is not available and we can only rely on eth_gasPrice.
* core,eth/tracers: make isPrecompiled dependent on HF
* eth/tracers: use keys when constructing chain config struct
* eth/tracers: dont initialize activePrecompiles with random value
This change increases the cache size from 64 to 256 Mb for block bodies.
Benchmarks have shown this to be one bottleneck when trying to achieve
higher download speeds.
The commit also includes a minor optimization for header inserts in package
core: previously, the presence of headers in the database was checked for
every header before writing it. With the change, if one header fails the
presence check, all subsequent headers are also assumed to be missing.
This is an improvement because in practice, the headers are almost always
missing during sync.
Previously, the test waited a second and then failed if geth had not
started. This caused the test to fail intermittently. This change checks
whether the IPC is open 10 times over a 5 second period and then fails
if geth is still not available.
The `README.md` links the Gitter channel for discussions, but the
official docs and even the Gitter channel itself recommend using the
official Discord Server for such discussions.
This PR simply changes the Gitter link and provides Discord invite link.
When deleting in fullNode, and the new child node nn is not nil, there is no need
to check the number of non-nil entries in the node. This is because the fullNode
must've contained at least two children before deletion, so there must be another
child node other than nn.
Co-authored-by: Felix Lange <fjl@twurst.com>
Copy the CliqueConfig instead of reusing the pointer.
This makes DeveloperGenesisBlock thread safe and prevents it from
changing params.AllCliqueProtocolChanges.Clique.Epoch.
* accounts/abi/bind: fix bounded contracts and sim backend for 1559
* accounts/abi/bind, ethclient: don't rely on chain config for gas prices
* all: enable London for all internal tests
* les: get receipt type info in les tests
* les: fix weird test
Co-authored-by: Martin Holst Swende <martin@swende.se>
This function is not used in the code base, so probably safe to do rename, or remove in its entirety, but I'm assuming the logic from the original creator still applies so rename probably better.
* internal/ethapi: add baseFee to RPCMarshalHeader
* internal/ethapi: add FeeCap, Tip and correct GasPrice to EIP-1559 RPCTransaction results
* core,eth,les,internal: add support for tip estimation in gas price oracle
* internal/ethapi,eth/gasprice: don't suggest tip larger than fee cap
* core/types,internal: use correct eip1559 terminology for json marshalling
* eth, internal/ethapi: fix rebase problems
* internal/ethapi: fix rpc name of basefee
* internal/ethapi: address review concerns
* core, eth, internal, les: simplify gasprice oracle (#25)
* core, eth, internal, les: simplify gasprice oracle
* eth/gasprice: fix typo
* internal/ethapi: minor tweak in tx args
* internal/ethapi: calculate basefee for pending block
* internal/ethapi: fix panic
* internal/ethapi, eth/tracers: simplify txargs ToMessage
* internal/ethapi: remove unused param
* core, eth, internal: fix regressions wrt effective gas price in the evm
* eth/gasprice: drop weird debug println
* internal/jsre/deps: hack in 1559 gas conversions into embedded web3
* internal/jsre/deps: hack basFee to decimal conversion
* internal/ethapi: init feecap and tipcap for legacy txs too
* eth, graphql, internal, les: fix gas price suggestion on all combos
* internal/jsre/deps: handle decimal tipcap and feecap
* eth, internal: minor review fixes
* graphql, internal: export max fee cap RPC endpoint
* internal/ethapi: fix crash in transaction_args
* internal/ethapi: minor refactor to make the code safer
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
Co-authored-by: gary rong <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This commit changes the behavior of BitCurve.Add to be more inline
with btcd. It fixes two different bugs:
1) When adding a point at infinity to another point, the other point
should be returned. While this is undefined behavior, it is better
to be more inline with the go standard library.
Thus (0,0) + (a, b) = (a,b)
2) Adding the same point to itself produced the point at infinity.
This is incorrect, now doubleJacobian is used to correctly calculate it.
Thus (a,b) + (a,b) == 2* (a,b) and not (0,0) anymore.
The change also adds a differential fuzzer for Add, testing it against btcd.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change significantly improves the performance of RLPx message reads
and writes. In the previous implementation, reading and writing of
message frames performed multiple reads and writes on the underlying
network connection, and allocated a new []byte buffer for every read.
In the new implementation, reads and writes re-use buffers, and perform
much fewer system calls on the underlying connection. This doubles the
theoretically achievable throughput on a single connection, as shown by
the benchmark result:
name old speed new speed delta
Throughput-8 70.3MB/s ± 0% 155.4MB/s ± 0% +121.11% (p=0.000 n=9+8)
The change also removes support for the legacy, pre-EIP-8 handshake encoding.
As of May 2021, no actively maintained client sends this format.
Fixes the case (example below) where the value passed
to --ethstats flag would be parsed wrongly because the
node name and/or password value contained the special
characters '@' or ':'
--ethstats "ETC Labs Metrics @meowsbits":mypass@ws://mordor.dash.fault.dev:3000
This PR refactors the eth test suite to make it more readable and
easier to use. Some notable differences:
- A new file helpers.go stores all of the methods used between
both eth66 and eth65 and below tests, as well as methods shared
among many test functions.
- suite.go now contains all of the test functions for both eth65
tests and eth66 tests.
- The utesting.T object doesn't get passed through to other helper methods,
but is instead only used within the scope of the test function,
whereas helper methods return errors, so only the test function
itself can fatal out in the case of an error.
- The full test suite now only takes 13.5 seconds to run.
There are two transaction parameter structures defined in
the codebase, although for different purposes. But most of
the parameters are shared. So it's nice to reduce the code
duplication by merging them together.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This removes the error log message that says
Ethereum peer removal failed ... err="peer not registered"
The error happened because removePeer was called multiple
times: once to disconnect the peer, and another time when the
handler exited. With this change, removePeer now has the sole
purpose of disconnecting the peer. Unregistering happens exactly
once, when the handler exits.
This change grows the static integer buffer in Stream to 32 bytes,
making it possible to decode 256bit integers without allocating a
temporary buffer.
In the recent commit 088da24, Stream struct size decreased from 120
bytes down to 88 bytes. This commit grows the struct to 112 bytes again,
but the size change will not degrade performance because Stream
instances are internally cached in sync.Pool.
name old time/op new time/op delta
DecodeBigInts-8 12.2µs ± 0% 8.6µs ± 4% -29.58% (p=0.000 n=9+10)
name old speed new speed delta
DecodeBigInts-8 230MB/s ± 0% 326MB/s ± 4% +42.04% (p=0.000 n=9+10)
All encoding/decoding operations read the type cache to find the
writer/decoder function responsible for a type. When analyzing CPU
profiles of geth during sync, I found that the use of sync.RWMutex in
cache lookups appears in the profiles. It seems we are running into
CPU cache contention problems when package rlp is heavily used
on all CPU cores during sync.
This change makes it use atomic.Value + a writer lock instead of
sync.RWMutex. In the common case where the typeinfo entry is present in
the cache, we simply fetch the map and lookup the type.
* core/types, miner: create TxWithMinerFee wrapper, add EIP-1559 support to TransactionsByMinerFeeAndNonce
miner: set base fee when creating a new header, handle gas limit, log miner fees
* all: rename to NewTransactionsByPriceAndNonce
* core/types, miner: rename to NewTransactionsByPriceAndNonce + EffectiveTip
miner: activate 1559 for testGenerateBlockAndImport tests
* core,miner: revert naming to TransactionsByPriceAndTime
* core/types/transaction: update effective tip calculation logic
* miner: update aleut to london
* core/types/transaction_test: use correct signer for 1559 txs + add back sender check
* miner/worker: calculate gas target from gas limit
* core, miner: fix block gas limits for 1559
Co-authored-by: Ansgar Dietrichs <adietrichs@gmail.com>
Co-authored-by: lightclient@protonmail.com <lightclient@protonmail.com>
This change extracts the peer QoS tracking logic from eth/downloader, moving
it into the new package p2p/msgrate. The job of msgrate.Tracker is determining
suitable timeout values and request sizes per peer.
The snap sync scheduler now uses msgrate.Tracker instead of the hard-coded 15s
timeout. This should make the sync work better on network links with high latency.
This commit makes various cleanup changes to rlp.Stream.
* rlp: shrink Stream struct
This removes a lot of unused padding space in Stream by reordering the
fields. The size of Stream changes from 120 bytes to 88 bytes. Stream
instances are internally cached and reused using sync.Pool, so this does
not improve performance.
* rlp: simplify list stack
The list stack kept track of the size of the current list context as
well as the current offset into it. The size had to be stored in the
stack in order to subtract it from the remaining bytes of any enclosing
list in ListEnd. It seems that this can be implemented in a simpler
way: just subtract the size from the enclosing list context in List instead.
This changes the definitions of Ping and Pong, adding an optional field
for the sequence number. This field was previously encoded/decoded using
the "tail" struct tag, but using "optional" is much nicer.
This adds support for a new struct tag "optional". Using this tag, structs used
for RLP encoding/decoding can be extended in a backwards-compatible way,
by adding new fields at the end.
This changes the SimultaneousRequests test to send the requests from the same
connection, as it doesn't really make sense to test whether a node can respond
to two requests with different request IDs from separate connections.
With the update to a newer AppVeyor build image, creating the Windows
installer no longer worked because of a string quoting error in EnvVarUpdate.nsh.
This applies the fix recommended in https://stackoverflow.com/questions/62081765.
This PR cleans up the CI build system and fixes a couple of issues.
- The go tool launcher code has been moved to internal/build. With the new
toolchain functions, the environment of the host Go (i.e. the one that built
ci.go) and the target Go (i.e. the toolchain downloaded by -dlgo) are isolated
more strictly. This is important to make cross compilation and -dlgo work
correctly in more cases.
- The -dlgo option now skips the download and uses the host Go if the running Go
version matches dlgoVersion exactly.
- The 'test' command now supports -dlgo, -cc and -arch. Running unit tests with
foreign GOARCH is occasionally useful. For example, it can be used to run
32-bit tests on Windows. It can also be used to run darwin/amd64 tests on
darwin/arm64 using Rosetta 2.
- The 'aar', 'xcode' and 'xgo' commands now use a slightly different method to
install external tools. They previously used `go get`, but this comes with the
annoying side effect of modifying go.mod. They now use `go install` instead,
which is the recommended way of installing tools without modifying the local
module.
- The old build warning about outdated Go version has been removed because we're
much better at keeping backwards compatibility now.
This removes auto-configuration of the snap.*.ethdisco.net DNS discovery tree.
Since measurements have shown that > 75% of nodes in all.*.ethdisco.net support
snap, we have decided to retire the dedicated index for snap and just use the eth
tree instead.
The dial iterators of eth and snap now use the same DNS tree in the default configuration,
so both iterators should use the same DNS discovery client instance. This ensures that
the record cache and rate limit are shared. Records will not be requested multiple times.
While testing the change, I noticed that duplicate DNS requests do happen even
when the client instance is shared. This is because the two iterators request the tree
root, link tree root, and first levels of the tree in lockstep. To avoid this problem, the
change also adds a singleflight.Group instance in the client. When one iterator
attempts to resolve an entry which is already being resolved, the singleflight object
waits for the existing resolve call to finish and returns the entry to both places.
* params: remove dependency on crypto
Package params should not depend on package crypto because building
crypto requires cgo.
Since build/ci.go needs package params to get the go-ethereum version
number, C code must be compiled in order to run the build tool, which is
annoying for certain cross-compilation setups.
* params: add SectionHead
* eth/protocols/snap: generate storage trie from full dirty snap data
* eth/protocols/snap: get rid of some more dead code
* eth/protocols/snap: less frequent logs, also log during trie generation
* eth/protocols/snap: implement dirty account range stack-hashing
* eth/protocols/snap: don't loop on account trie generation
* eth/protocols/snap: fix account format in trie
* core, eth, ethdb: glue snap packets together, but not chunks
* eth/protocols/snap: print completion log for snap phase
* eth/protocols/snap: extended tests
* eth/protocols/snap: make testcase pass
* eth/protocols/snap: fix account stacktrie commit without defer
* ethdb: fix key counts on reset
* eth/protocols: fix typos
* eth/protocols/snap: make better use of delivered data (#44)
* eth/protocols/snap: make better use of delivered data
* squashme
* eth/protocols/snap: reduce chunking
* squashme
* eth/protocols/snap: reduce chunking further
* eth/protocols/snap: break out hash range calculations
* eth/protocols/snap: use sort.Search instead of looping
* eth/protocols/snap: prevent crash on storage response with no keys
* eth/protocols/snap: nitpicks all around
* eth/protocols/snap: clear heal need on 1-chunk storage completion
* eth/protocols/snap: fix range chunker, add tests
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* trie: fix test API error
* eth/protocols/snap: fix some further liter issues
* eth/protocols/snap: fix accidental batch reuse
Co-authored-by: Martin Holst Swende <martin@swende.se>
Previously, the makeCallVariantGasCallEIP2929 charged the cold account access cost directly, leading to an incorrect gas cost passed to the tracer from the main execution loop.
This change still temporarily charges the cost (to allow for an accurate calculation of the available gas for the call), but then afterwards refunds it and instead returns the correct total gas cost to be then properly charged in the main loop.
The Append / truncate operations were racy. When a datafile reaches 2Gb, a new file is needed. For this operation, we require a writelock, which is not needed in the 99.99% of all cases where the data does fit in the current head-file.
This transition from readlock to writelock was incorrect, and as the readlock was released, a truncate operation could slip in between, and truncate the data. This would have been fine, however, the Append operation continued writing as if no truncation had occurred, e.g writing item 5 where item 0 should reside.
This PR changes the behaviour, so that if when we run into the situation that a new file is needed, it aborts, and retries, this time with a writelock.
The outcome of the situation described above, running on this PR, would instead be that the Append operation exits with a failure.
When receiving PING from an IPv4 address over IPv6, the implementation sent
back a IPv4-in-IPv6 address. This change makes it reflect the IPv4 address.
* core/state/snapshot: reuse memory data instead of hitting disk when generating
* trie: minor nitpicks wrt the resolver optimization
* core/state/snapshot, trie: use key/value store for resolver
* trie: fix linter
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* eth/protocols, prp/tracker: add support for req/rep rtt tracking
* p2p/tracker: sanity cap the number of pending requests
* pap/tracker: linter <3
* p2p/tracker: disable entire tracker if no metrics are enabled
The new error type is returned by client operations contains details of
the response error code and response body.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change improves the efficiency of the nodeIterator seek
operation. Previously, seek essentially ran the iterator forward
until it found the matching node. With this change, it skips
over fullnode children and avoids resolving them from the database.
The new -limit option makes the filter operate on top N nodes by score.
This also adds ENR attribute stats in the nodeset info command.
Node set commands are now documented in README.
This change adds the --catalyst flag, enabling an RPC API for eth2 integration.
In this initial version, catalyst mode also disables all peer-to-peer networking.
Co-authored-by: Mikhail Kalinin <noblesse.knight@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
The stacktrie is a bit un-untuitive, API-wise: since it mutates input values.
Such behaviour is dangerous, and easy to get wrong if the calling code 'forgets' this quirk. The behaviour is fixed by this PR, so that the input values are not modified by the stacktrie.
Note: just as with the Trie, the stacktrie still references the live input objects, so it's still _not_ safe to mutate the values form the callsite.
* log: fix formatting of big.Int
The implementation of formatLogfmtBigInt had two issues: it crashed when
the number was actually large enough to hit the big integer case, and
modified the big.Int while formatting it.
* log: don't call FormatLogfmtInt64 for int16
* log: separate from decimals back, not front
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: add thousandths separators for big numbers on log messages
* p2p/sentry: drop accidental file
* common, log: add fast number formatter
* common, eth/protocols/snap: simplifty fancy num types
* log: handle nil big ints
* replaces `an chance` with `a chance`
* replaces `SignHashWithPassphrase` with `SignTextWithPassphrase` as there was no SignHashWithPasspharse function in the file
* core/vm: implement AccessListTracer
* eth: implement debug.createAccessList
* core/vm: fixed nil panics in accessListTracer
* eth: better error messages for createAccessList
* eth: some fixes on CreateAccessList
* eth: allow for provided accesslists
* eth: pass accesslist by value
* eth: remove created acocunt from accesslist
* core/vm: simplify access list tracer
* core/vm: unexport accessListTracer
* eth: return best guess if al iteration times out
* eth: return best guess if al iteration times out
* core: docstring, unexport methods
* eth: typo
* internal/ethapi: move createAccessList to eth package
* internal/ethapi: remove reexec from createAccessList
* internal/ethapi: break if al is equal to last run, not if gas is equal
* internal/web3ext: fixed arguments
* core/types: fixed equality check for accesslist
* core/types: no hardcoded vals
* core, internal: simplify access list generation, make it precise
* core/vm: fix typo
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change adds support for logging JSON records when the --log.json flag is
given. The --debug and --backtrace flags are deprecated and replaced by
--log.debug and --log.backtrace.
While changing this, it was noticed that the --memprofilerate and
--blockprofilerate were ineffective (they were always overridden even if
--pprof.memprofilerate was not set). This is also fixed.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds support for EIP-2718 access list transactions in the GraphQL API.
Co-authored-by: Amit Shah <amitshah0t7@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
This removes the duplicated definition of eth_chainID
in package eth and updates the definition in internal/ethapi
to treat chain ID as a bigint.
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a rare issue where the client subscription forwarding loop
would attempt send on the subscription's channel after Unsubscribe has
returned, leading to a panic if the subscription channel was already
closed by the user. Example:
sub, _ := client.Subscribe(..., channel, ...)
sub.Unsubscribe()
close(channel)
The race occurred because Unsubscribe called quitWithServer to tell the
forwarding loop to stop sending on sub.channel, but did not wait for the
loop to actually come down. This is fixed by adding an additional channel
to track the shutdown, on which Unsubscribe now waits.
Fixes#22322
* core/state/snapshot, ethdb: track deletions more accurately
* core/state/snapshot: don't reset the iterator, leveldb's screwy
* ethdb: don't mess with the insert batches for now
This fixes an issue where the ethstats service could crash if geth was
started and then immediately stopped due to an internal error. The
cause of the crash was a nil subscription being returned by the backend,
because the background goroutine creating them was scheduled after
the backend had already shut down.
Moving the creation of subscriptions into the Start method, which runs
synchronously during startup of the node, means the returned subscriptions
can never be 'nil'.
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
The main idea behind it is: the range compaction is very expensive
which can take a few hours to finish. During this long procedure,
a lot of exceptions can occur, e.g.
- Geth is killed manually
- Geth is killed because of machine crash
- etc
In order to minimize the effect of the exceptions, the compaction
is moved out of the pruning. So that even the compaction is not
finished, the pruning is regarded as done.
This upgrades the cloudflare client dependency to v0.14.0. The new
version changes the API because all methods now require a context
parameter. This change also reduces the log level of the 'Skipping...'
message to debug, following a similar change in the AWS deployer.
The PR implements the --miner.notify.full flag that enables full pending block
notifications. When this flag is used, the block notifications sent to mining
endpoints contain the complete block header JSON instead of a work package
array.
Co-authored-by: AlexSSD7 <alexandersadovskyi7@protonmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/devp2p: fix comparison of TXT record value
The AWS API returns quoted DNS strings, so we must encode the new value
before comparing it against the existing record content.
* cmd/devp2p: add test
* cmd/devp2p: fix typo and rename val -> newValue
Fixes the CaptureStart api to include the EVM, thus being able to set the statedb early on. This pr also exposes the struct we used internally in the interpreter to encapsulate the contract, mem, stack, rstack, so we pass it as a single struct to the tracer, and removes the error returns on the capture methods.
In Geth v1.10, we changed the structure of the "les" ENR entry. As a result, the DHT crawler that creates the DNS lists
no longer recognizes the les nodes, which is fixed in this commit.
* cmd/devp2p: skip ENR field tails properly in nodeset filter
* cmd/devp2p: fix tail decoder for snap as well
* les: fix tail decoding in "eth" ENR entry
This PR fixes a regression introduced in #22360, when we updated to the v2 of the AWS sdk, which causes current crawler to just get the same first 100 results over and over, and get stuck in a loop.
This fixes the calculation of the tree branch factor. With the new
formula, we now creat at most 13 children instead of 30, ensuring
the TXT record size will be below 370 bytes.
This updates the DNS deployer to use AWS SDK v2. Migration is relatively
seamless, although there were two locations that required a slightly
different approach to achieve the same results. In particular, waiting for
DNS change propagation is very different with SDK v2.
This change also optimizes DNS updates by publishing all changes before
waiting for propagation.
The wantErr field was disused, and the error returned by HeaderByNumber
was not properly tested.
This simplifies the error checking using errors.Is and asserts that getting
an expected missing header returns ethereum.NotFound. Also adds a nil
check condition for header.Number before using big.Int's Sign method.
This PR fixes an issue with the eth66 test suite where, during a readAndServe when
the test is manually responding to GetBlockHeader requests, it now responds
with a BlockHeaders eth66 packet that includes the inbound request ID.
This PR fixes multiple issues with the UDP connection pre-negotiation feature:
- the enable condition was wrong (it checked the existence of the DiscV5 struct where it wasn't initialized yet, disabling the feature even if discv5 was enabled)
- the server pool queried already connected nodes when the discovery iterators returned them again
- servers responded positively before they were synced and really willing to accept connections
Metrics are also added on the server side that count the positive and negative replies to served connection queries.
This PR fixes multiple issues with the UDP connection pre-negotiation feature:
- the enable condition was wrong (it checked the existence of the DiscV5 struct where it wasn't initialized yet, disabling the feature even if discv5 was enabled)
- the server pool queried already connected nodes when the discovery iterators returned them again
- servers responded positively before they were synced and really willing to accept connections
Metrics are also added on the server side that count the positive and negative replies to served connection queries.
The oss-fuzz fuzzer has been reporting some failing testcases for les. They're all spurious, and cannot reliably be reproduced. However, running them showed that there was a goroutine leak: the tests created a lot of new clients, which started an exec queue that was never torn down.
This PR fixes the goroutine leak, and also a log message which was erroneously formatted.
This updates the consensus tests to commit 31d6630 and
adds support for access list transactions in the test runner.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR implements the first one of the "lespay" UDP queries which
is already useful in itself: the capacity query. The server pool is making
use of this query by doing a cheap UDP query to determine whether it is
worth starting the more expensive TCP connection process.
This replaces the github.com/pborman/uuid dependency with
github.com/google/uuid because the former is only a wrapper for
the latter (since v1.0.0).
Co-authored-by: Felix Lange <fjl@twurst.com>
* les: move serverPool to les/vflux/client
* les: add metrics
* les: moved ValueTracker inside ServerPool
* les: protect against node registration before server pool is started
* les/vflux/client: fixed tests
* les: make peer registration safe
This adds support for EIP-2718 typed transactions as well as EIP-2930
access list transactions (tx type 1). These EIPs are scheduled for the
Berlin fork.
There very few changes to existing APIs in core/types, and several new APIs
to deal with access list transactions. In particular, there are two new
constructor functions for transactions: types.NewTx and types.SignNewTx.
Since the canonical encoding of typed transactions is not RLP-compatible,
Transaction now has new methods for encoding and decoding: MarshalBinary
and UnmarshalBinary.
The existing EIP-155 signer does not support the new transaction types.
All code dealing with transaction signatures should be updated to use the
newer EIP-2930 signer. To make this easier for future updates, we have
added new constructor functions for types.Signer: types.LatestSigner and
types.LatestSignerForChainID.
This change also adds support for the YoloV3 testnet.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
Co-authored-by: Ryan Schneider <ryanleeschneider@gmail.com>
Transaction unindexing will be enabled by default as of 1.10, which causes tx status retrieval will be broken without this PR.
This PR introduces a retry mechanism in TxStatus retrieval.
This PR adds a more CLI flag, so that the les-server can serve light clients even the local node is not synced yet.
This functionality is needed in some testing environments(e.g. hive). After launching the les server, no more blocks will be imported so the node is always marked as "non-synced".
This PR prevents users from submitting transactions without EIP-155 enabled. This behaviour can be overridden by specifying the flag --rpc.allow-unprotected-txs=true.
This PR introduces:
- db.put to put a value into the database
- db.get to read a value from the database
- db.delete to delete a value from the database
- db.stats to check compaction info from the database
- db.compact to trigger a db compaction
It also moves inspectdb to db.inspect.
* les: refactored server handler
* tests/fuzzers/les: add fuzzer for les server handler
* tests, les: update les fuzzer
tests: update les fuzzer
tests/fuzzer/les: release resources
tests/fuzzer/les: pre-initialize all resources
* les: refactored server handler and fuzzer
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
In the random sync algorithm used by the DNS node iterator, we first pick a random
tree and then perform one sync action on that tree. This happens in a loop until any
node is found. If no trees contain any nodes, the iterator will enter a hot loop spinning
at 100% CPU.
The fix is complicated. The iterator now checks if a meaningful sync action can
be performed on any tree. If there is nothing to do, it waits for the next root record
recheck time to arrive and then tries again.
Fixes#22306
io.Reader may return n > 0 and io.EOF at the end of the input stream.
readFull did not handle this correctly, looking only at the error. This fixes
it to check for n == len(buf) as well.
This PR optimizes the broadcast loop. Instead of iterating twice through a given set of transactions to weed out which peers have and which do not have a tx, to send/announce transactions, we do it only once.
There was a dormant error with structured inputs that failed unpacking.
This commit fixes the error by switching casting to the better abi.ConvertType function.
It also adds a test for calling a view function that returns a struct
Prevents a situation where we (not running snap) connects with a peer running snap, and get stalled waiting for snap registration to succeed (which will never happen), which cause a waitgroup wait to halt shutdown
This moves the eth config definition into a separate package, eth/ethconfig.
Packages eth and les can now import this common package instead of
importing eth from les, reducing dependencies.
Co-authored-by: Felix Lange <fjl@twurst.com>
fixes an issue where local transactions that were included in the chain before a SetHead were rejected if resubmitted, since the txpool had not reset the state to the current (older) state.
The PR makes use of the stacktrie, which is is more lenient on resource consumption, than the regular trie, in cases where we only need it for DeriveSha
* remove uneeded convertion type
* remove redundant type in composite literal
* omit explicit type where implicit
* remove unused redundant parenthesis
* remove redundant import alias duktape
This change allows users to set a custom path prefix on which to mount the http-rpc
or ws-rpc handlers via the new flags --http.rpcprefix and --ws.rpcprefix.
Fixes#21826
Co-authored-by: Felix Lange <fjl@twurst.com>
Removes the yolov2 definition, adds yolov3, including EIP-2565. This PR also disables some of the erroneously generated blockchain and statetests, and adds the new genesis hash + alloc for yolov3.
This PR disables the CLI switches for yolo, since it's not complete until we merge support for 2930.
This PR enables running the new discv5 protocol in both LES client
and server mode. In client mode it mixes discv5 and dnsdisc iterators
(if both are enabled) and filters incoming ENRs for "les" tag and fork ID.
The old p2p/discv5 package and all references to it are removed.
Co-authored-by: Felix Lange <fjl@twurst.com>
* accounts/scwallet: use go-ethereum crypto instead of go-ecdh
github.com/wsddn/go-ecdh is a wrapper package for ECDH functionality
with any elliptic curve.
Since 'generic' ECDH is not required in accounts/scwallet (the curve is
always secp256k1), we can just use the standard library functionality
and our own crypto libraries to perform ECDH and save a dependency.
* Update accounts/scwallet/securechannel.go
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
* Use the correct key
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
This PR implements the following modifications
- Don't shortcut check if block is present, thus avoid disk lookup
- Don't check hash ancestry in early-check (it's still done in parallel checker)
- Don't check time.Now for every single header
Charts and background info can be found here: https://github.com/holiman/headerimport/blob/main/README.md
With these changes, writing 1M headers goes down to from 80s to 62s.
This moves the tracing RPC API implementation to package eth/tracers.
By doing so, package eth no longer depends on tracing and the duktape JS engine.
The change also enables tracing using the light client. All tracing methods work with the
light client, but it's a lot slower compared to using a full node.
This PR fixes the receipt status field to be decimal instead of a hex string,
as called for by the spec.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Squashed from the following commits:
core/state: lazily init snapshot storage map
core/state: fix flawed meter on storage reads
core/state: make statedb/stateobjects reuse a hasher
core/blockchain, core/state: implement new trie prefetcher
core: make trie prefetcher deliver tries to statedb
core/state: refactor trie_prefetcher, export storage tries
blockchain: re-enable the next-block-prefetcher
state: remove panics in trie prefetcher
core/state/trie_prefetcher: address some review concerns
sq
This PR introduces a new config field SyncFromCheckpoint for light client.
In some special scenarios, it's required to start synchronization from some
arbitrary checkpoint or even from the scratch. So this PR offers this
flexibility to users so that the synchronization start point can be configured.
There are two relevant configs: SyncFromCheckpoint and Checkpoint.
- If the SyncFromCheckpoint is true, the light client will try to sync from the
specified checkpoint.
- If the Checkpoint is not configured, then the light client will sync from the
scratch(from the latest header if the database is not empty)
Additional notes: these two configs are not visible in the CLI flags but only
accessable in the config file.
Example Usage:
[Eth]
SyncFromCheckpoint = true
[Eth.Checkpoint]
SectionIndex = 100
SectionHead = "0xabc"
CHTRoot = "0xabc"
BloomRoot = "0xabc"
PS. Historical checkpoint can be retrieved from the synced full node or light
client via les_getCheckpoint API.
Adding warnings of free disk space left and graceful shutdown when there is not enough space left.
This also adds a flag datadir.minfreedisk which can be used to set the trigger for low disk space, and setting it to zero disables the check.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR has two changes in the les protocol:
- the auxRoot is not supported. See ethereum/devp2p#171 for more information
- the empty response will be returned in GetHelperTrieProofsMsg request if the merkle
proving is failed. note, for backward compatibility, the empty merkle proof as well as
the request auxiliary data will still be returned in les2/3 protocol no matter the proving
is successful or not. the proving failure can happen e.g. request the proving for a
non-included entry in helper trie (unstable header).
The tests sometimes failed with certain go versions because
the behavior of http.Server.Shutdown changed over time. A bug
that was fixed in Go 1.15 could cause active connections on unrelated
servers to close unexpectedly. This is fixed by avoiding use of the
same port number in all tests.
USB enumeration still occured. Make sure it will only occur if --usb is set.
This also deprecates the 'NoUSB' config file option in favor of a new option 'USB'.
Resolves https://github.com/etclabscore/core-geth/issues/273
jsre.JSRE already handles establishing preload
file paths relative to the 'assets' path (aka docroot),
where it joins the assets dir and the file path if relative,
or uses the file path only if absolute.
The duplication of this logic by MakeConsolePreloads
caused preloaded files to have paths which contained
duplicate references to the assets dir path.
Date: 2020-12-30 08:25:01-06:00
Signed-off-by: meows <b5c6@protonmail.com>
This changes the chainID RPC method to return an error when EIP-155 is not yet
active at the current block height. It used to simply return zero in this case, but
that's confusing.
This commit extends the ethclient test suite and increases code coverage of the ethclient
package from ~15% to >55%. These tests act as early smoke tests to signal issues in the
RPC-interface. E.g. if a functionality like eth_chainId or eth_call breaks, the test
will break.
This changes the JSON encoding of blocks returned by the API
to have decimal instead of hexadecimal numbers. The spec wants
it this way.
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR removes a logic in the miner, which was originally intended to help temporary testnets based on ethash from "running off into the future". If the difficulty was low, and a few computers started mining several blocks per second, the ethash rules (which demand 1s delay between blocks) would push the blocktimes further and further away.
The solution was to make the miner sleep while this happened.
Nowadays, this problem is solved instead by PoA chains, and it's recommended to let testnets and devnets be based on clique instead. The existing logic is problematic, since it can cause stalls within the miner making it difficult for remote workers to submit work if the channel is blocked on a sleep.
Credits to Saar Tochner for reporting this via the bug bounty
The legacy dot-org URL was displaying a message about the repository
having migrated to the dot-com service, which now covers open-source
projects as well.
During the snap and eth refactor, the net_version rpc call was falsely deprecated.
This restores the net_version RPC handler as most eth2 nodes and other software
depend on it.
* les: allow tx unindexing in les/4 light server mode
* les: minor fixes
* les: more small fixes
* les: add meaningful constants for recentTxIndex handshake field
This PR implements unclean shutdown marker. Every time geth boots, it adds a timestamp to a list of timestamps in the database. This list is capped at 10. At a clean shutdown, the timestamp is removed again.
Thus, when geth exits unclean, the marker remains, and at boot up we show the most recent unclean shutdowns to the user, which makes it easier to diagnose root-causes to certain problems.
Co-authored-by: Nagy Salem <me@muhnagy.com>
This PR adds re-written difficulty calculators, which are based on uint256. It also adds a fuzzer + oss-fuzz integration for the new fuzzer. It does differential fuzzing between the new and old calculators.
Note: this PR does not actually enable the new calculators.
This PR adds support for using Twitter API to query the tweet and author details. There are two reasons behind this change:
- Twitter will be deprecating the legacy website on 15th December. The current method is expected to stop working then.
- More importantly, the current system uses Twitter handle for spam protection but the Twitter handle can be changed via automated calls. This allows bots to use the same tweet to withdraw funds infinite times as long as they keep changing their handle between every request. The Rinkeby as well as the Goerli faucet are being actively drained via this method. This PR changes the spam protection to be based on Twitter IDs instead of usernames. A user can not change their Twitter ID.
In miner/worker.go, there are two goroutine using channel w.newWorkCh: newWorkerLoop() sends to this channel, and mainLoop() receives from this channel. Only the receive operation is in a select.
However, w.exitCh may be closed by another goroutine. This is fine for the receive since receive is in select, but if the send operation is blocking, then it will block forever. This commit puts the send in a select, so it won't block even if w.exitCh is closed.
Similarly, there are two goroutines using channel errc: the parent that runs the test receives from it, and the child created at line 573 sends to it. If the parent goroutine exits too early by calling t.Fatalf() at line 614, then the child goroutine will be blocked at line 574 forever. This commit adds 1 buffer to errc. Now send will not block, and receive is not influenced because receive still needs to wait for the send.
The previous fix#21960 converted the float to an intermediate signed int, before attempting the uint conversion. Although this works, this doesn't guarantee that other architectures will work the same.
This commit fixes a flaw in two testcases, and brings down the exec-time from ~40s to ~8s for trie/TestIncompleteSync.
The checkConsistency was performed over and over again on the complete set of nodes, not just the recently added, turning it into a quadratic runtime.
The database panicked for invalid IPs. This is usually no problem
because all code paths leading to node DB access verify the IP, but it's
dangerous because improper validation can turn this panic into a DoS
vulnerability. The quick fix here is to just turn database accesses
using invalid IP into a noop. This isn't great, but I'm planning to
remove the node DB for discv5 long-term, so it should be fine to have
this quick fix for half a year.
Fixes#21849
This fixes some issues in crypto/signify and makes release signing work.
The archive signing step in ci.go used getenvBase64, which decodes the key data.
This is incorrect here because crypto/signify already base64-decodes the key.
* core: add test for headerchain inserts
* core, light: write headerchains in batches
* core: change to one callback per batch of inserted headers + review concerns
* core: error-check on batch write
* core: unexport writeHeaders
* core: remove callback parameter in InsertHeaderChain
The semantics of InsertHeaderChain are now much simpler: it is now an
all-or-nothing operation. The new WriteStatus return value allows
callers to check for the canonicality of the insertion. This change
simplifies use of HeaderChain in package les, where the callback was
previously used to post chain events.
* core: skip some hashing when writing headers
* core: less hashing in header validation
* core: fix headerchain flaw regarding blacklisted hashes
Co-authored-by: Felix Lange <fjl@twurst.com>
Both Hash and Address have a String method, which returns the value as
hex with 0x prefix. They also had a Format method which tried to print
the value using printf of []byte. The way Format worked was at odds with
String though, leading to a situation where fmt.Sprintf("%v", hash)
returned the decimal notation and hash.String() returned a hex string.
This commit makes it consistent again. Both types now support the %v,
%s, %q format verbs for 0x-prefixed hex output. %x, %X creates
unprefixed hex output. %d is also supported and returns the decimal
notation "[1 2 3...]".
For Address, the case of hex characters in %v, %s, %q output is
determined using the EIP-55 checksum. Using %x, %X with Address
disables checksumming.
Co-authored-by: Felix Lange <fjl@twurst.com>
This commit enables users to specify which signer they want to use while creating their transactOpts.
Previously all contract interactions used the homestead signer. Now a user can specify whether they
want to sign with homestead or EIP155 and specify the chainID which adds another layer of security.
Closes#16484
* cmd/geth: implement vulnerability check
* cmd/geth: use minisign to verify vulnerability feed
* cmd/geth: add the test too
* cmd/geth: more minisig/signify testing
* cmd/geth: support multiple pubfiles for signing
* cmd/geth: add @holiman minisig pubkey
* cmd/geth: polishes on vulnerability check
* cmd/geth: fix ineffassign linter nit
* cmd/geth: add CVE to version check struct
* cmd/geth/testdata: add missing testfile
* cmd/geth: add more keys to versionchecker
* cmd/geth: support file:// URLs in version check
* cmd/geth: improve key ID printing when signature check fails
Co-authored-by: Felix Lange <fjl@twurst.com>
A lot of times when we hit 'core' errors, example: invalid tx, the information provided is
insufficient. We miss several pieces of information: what account has nonce too high,
and what transaction in that block was offending?
This PR adds that information, using the new type of wrapped errors.
It also adds a testcase which (partly) verifies the output from the errors.
The first commit changes all usage of direct equality-checks on core errors, into
using errors.Is. The second commit adds contextual information. This wraps most
of the core errors with more information, and also wraps it one more time in
stateprocessor, to further provide tx index and tx hash, if such a tx is encoutered in
a block. The third commit uses the chainmaker to try to generate chains with such
errors in them, thus triggering the errors and checking that the generated string meets
expectations.
This PR fixes a deadlock reported here: #21925
The cause is that many operations may be pending, but if the close happens, only one of them gets awoken and exits, the others remain waiting for a signal that never comes.
* signer/core/api: fix derivation of ledger live accounts
For ledger hardware wallets, change account iteration as follows:
- ledger legacy: m/44'/60'/0'/X; for 0<=X<5
- ledger live: m/44'/60'/0'/0/X; for 0<=X<5
- ledger legacy: m/44'/60'/0'/X; for 0<=X<10
- ledger live: m/44'/60'/X'/0/0; for 0<=X<10
Non-ledger derivation is unchanged and remains as:
- non-ledger: m/44'/60'/0'/0/X; for 0<=X<10
* signer/core/api: derive ten default paths for all hardware wallets, plus ten legacy and ten live paths for ledger wallets
* signer/core/api: as .../0'/0/0 already included by default paths, do not include it again with ledger live paths
* accounts, signer: implement path iterators for hd wallets
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/build: implement signify's signing func
* Add signify to the ci utility
* fix output file format
* Add unit test for signify
* holiman's + travis' feedback
* internal/build: verify signify's output
* crypto: move signify to common dir
* use go-minisign to verify binaries
* more holiman feedback
* crypto, ci: support minisign output
* only accept one-line trusted comments
* configurable untrusted comments
* code cleanup in tests
* revert to use ed25519 from the stdlib
* bug: fix for empty untrusted comments
* write timestamp as comment if trusted comment isn't present
* rename line checker to commentHasManyLines
* crypto: added signify fuzzer (#6)
* crypto: added signify fuzzer
* stuff
* crypto: updated signify fuzzer to fuzz comments
* crypto: repro signify crashes
* rebased fuzzer on build-signify branch
* hide fuzzer behind gofuzz build flag
* extract key data inside a single function
* don't treat \r as a newline
* travis: fix signing command line
* do not use an external binary in tests
* crypto: move signify to crypto/signify
* travis: fix formatting issue
* ci: fix linter build after package move
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This fixes a deadlock that could occur when a response packet arrived
after a call had already received enough responses and was about to
signal completion to the dispatch loop.
Co-authored-by: Felix Lange <fjl@twurst.com>
* Make sure to return 400 when errors are present in the response
* graphql: use less memory in chainconfig for tests
Co-authored-by: Martin Holst Swende <martin@swende.se>
* added bls fuzzer
* crypto/bls12381: revert bls-changes, fixup fuzzer tests
* fuzzers: split bls fuzzing into 8 different units
* fuzzers/bls: remove (now stale) corpus
* crypto/bls12381: added blsfuzz corpus
* fuzzers/bls12381: fix the bls corpus
* fuzzers: fix oss-fuzz script
* tests/fuzzers: fixups on bls corpus
* test/fuzzers: remove leftover corpus
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* crypto/bn256: fix bn256Mul fuzzer to not hang on large input
* Update crypto/bn256/bn256_fuzz.go
Co-authored-by: ligi <ligi@ligi.de>
Co-authored-by: ligi <ligi@ligi.de>
* trie: fix tests to work on 32-bit systems
* les: make test work on 32-bit platform
* cmd/geth: fix windows-issues on tests
* trie: improve balance
* cmd/geth: make account tests less verbose + less mem intense
* rpc: make debug-level log output less verbose
* cmd/geth: lint
* Only compare hostnames in ws.origins
Also using a helper function for ToLower consolidates all preparation steps in one function for more maintainable consistency.
Spaces => tabs
Remove a semicolon
Add space at start of comment
Remove parens around conditional
Handle case wehre parsed hostname is empty
When passing a single word like "localhost" the parsed hostname is an empty string. Handle this and the error-parsing case together as default, and the nonempty hostname case in the conditional.
Refactor with new originIsAllowed functions
Adds originIsAllowed() & ruleAllowsOrigin(); removes prepOriginForComparison
Remove blank line
Added tests for simple allowed-orign rule
which does not specify a protocol or port, just a hostname
Fix copy-paste: `:=` => `=`
Remove parens around conditional
Remove autoadded whitespace on blank lines
Compare scheme, hostname, and port with rule
if the rule specifies those portions.
Remove one autoadded trailing whitespace
Better handle case where only origin host is given
e.g. "localhost"
Remove parens around conditional
Refactor: attemptWebsocketConnectionFromOrigin DRY
Include return type on helper function
Provide srv obj in helper fn
Provide srv to helper fn
Remove stray underscore
Remove blank line
parent 93e666b4c1e7e49b8406dc83ed93f4a02ea49ac1
author wbt <wbt@users.noreply.github.com> 1598559718 -0400
committer Martin Holst Swende <martin@swende.se> 1605602257 +0100
gpgsig -----BEGIN PGP SIGNATURE-----
iQFFBAABCAAvFiEEypmrtbNuJK1doP1AaDtDjAWl3fAFAl+zi9ARHG1hcnRpbkBz
d2VuZGUuc2UACgkQaDtDjAWl3fDRiwgAoMtzU8dwRV7Q9xkCwWEx9Wz2f3n6jUr2
VWBycDKGKwRkPPOER3oc9kzjGU/P1tFlK07PjfnAKZ9KWzxpDcJZwYM3xCBurG7A
16y4YsQnzgPNONv3xIkdi3RZtDBIiPFFEmdZFFvZ/jKexfI6JIYPngCAoqdTIFb9
On/aPvvVWQn1ExfmarsvvJ7kUDUG77tZipuacEH5FfFsfelBWOEYPe+I9ToUHskv
+qO6rOkV1Ojk8eBc6o0R1PnApwCAlEhJs7aM/SEOg4B4ZJJneiFuEXBIG9+0yS2I
NOicuDPLGucOB5nBsfIKI3USPeE+3jxdT8go2lN5Nrhm6MimoILDsQ==
=sgUp
-----END PGP SIGNATURE-----
Refactor: drop err var for more concise test lines
Add several tests for new WebSocket origin checks
Remove autoadded whitespace on blank lines
Restore TestWebsocketOrigins originally-named test
and rename the others to be helpers rather than full tests
Remove autoadded whitespace on blank line
Temporarily comment out new test sets
Uncomment test around origin rule with scheme
Remove tests without scheme on browser origin
per https://github.com/ethereum/go-ethereum/pull/21481/files#r479371498
Uncomment tests with port; remove some blank lines
Handle when browser does not specify scheme/port
Uncomment test for including scheme & port in rule
Add IP tests
* node: more tests + table-driven, ws origin changes
Co-authored-by: Martin Holst Swende <martin@swende.se>
The z == 0 check is hit whenever we Add two points with the same x1/x2
coordinate. crypto/elliptic uses the same check in their affineFromJacobian
function. This change does not affect block processing or tx signature verification
in any way, because it does not use the Add or Double methods.
* consensus/ethash: only use *reflect.SliceHeader, not reflect.SliceHeader. See comment here: https://github.com/golang/go/issues/40397\#issuecomment-663748689
* consensus/ethash: pr feedback from @mdempsky, makes a copy of dest such that is not mutated
* consensus/ethash: remove noop assign
* consensus/ethash: apply same fix to another location
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Martin Holst Swende <martin@swende.se>
* all: core: split vm.Config into BlockConfig and TxConfig
* core: core/vm: reset EVM between tx in block instead of creating new
* core/vm: added docs
This fixes cross-build and mobile framework failures.
It also disables the mac test builder because it was failing
all the time in hard to understand ways and we can't afford
it anymore under Travis CI's new pricing.
This new flag downloads a known version of Go and builds with it. This
is meant for environments where we can't easily upgrade the installed Go
version.
* .travis.yml: remove install step for PR test builders
We added this step originally to avoid re-building everything
for every test. go test has become much smarter in recent go
releases, so we no longer need to install anything here.
- Remove the ws:// prefix from the status endpoint since
the ws:// is already included in the stack.WSEndpoint().
- Don't register the services again in the node start.
Registration is already done in the initialization stage.
- Expose admin namespace via websocket.
This namespace is necessary for connecting the peers via websocket.
- Offer logging relevant options for exec adapter.
It's really painful to mix all log output in the single console. So
this PR offers two additional options for exec adapter in this case
testers can config the log output(e.g. file output) and log level
for each p2p node.
* trie: fix error in stacktrie not committing small roots
* fuzzers: make trie-fuzzer use correct returnvalues
* trie: improved tests
* tests/fuzzers: fuzzer for stacktrie vs regular trie
* test/fuzzers: make stacktrie fuzzer use 32-byte keys
* trie: fix error in stacktrie with small nodes
* trie: add (skipped) testcase for stacktrie
* tests/fuzzers: address review comments for stacktrie fuzzer
* trie: fix docs in stacktrie
This PR contains a minor optimization in derivesha, by exposing the RLP
int-encoding and making use of it to write integers directly to a
buffer (an RLP integer is known to never require more than 9 bytes
total). rlp.AppendUint64 might be useful in other places too.
The code assumes, just as before, that the hasher (a trie) will copy the
key internally, which it does when doing keybytesToHex(key).
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR replaces the old test genesis.json and chain.rlp files in the testdata
directory for the eth protocol test suite, and also adds documentation for
running the eth test suite locally.
It also improves the test output text and adds more timeouts.
Co-authored-by: Felix Lange <fjl@twurst.com>
TAP is a text format for test results. Parsers for it are available in many languages,
making it easy to consume. I want TAP output from our protocol tests because the
Hive wrapper around them needs to know about the test names and their individual
results and logs. It would also be possible to just write this info as JSON, but I don't
want to invent a new format.
This also improves the normal console output for tests (when running without --tap).
It now prints -- RUN lines before any output from the test, and indents the log output
by one space.
* core/state/snapshot: print warning if failed to resolve journal
* core/state/snapshot: fix snapshot recovery
When we meet the snapshot journal consisted with:
- disk layer generator with new-format
- diff layer journal with old-format
The base layer should be returned without error.
The broken diff layer can be reconstructed later
but we definitely don't want to reconstruct the
huge diff layer.
* core: add tests
ToHex was deprecated a couple years ago. The last remaining use
was in ToHexArray, which itself only had a single call site.
This just moves ToHexArray near its only remaining call site and
implements it using hexutil.Encode. This changes the default behaviour
of ToHexArray and with it the behaviour of eth_getProof. Previously we
encoded an empty slice as 0, now the empty slice is encoded as 0x.
This adds a few tiny fixes for les and the p2p simulation framework:
LES Parts
- Keep the LES-SERVER connection even it's non-synced
We had this idea to reject the connections in LES protocol if the les-server itself is
not synced. However, in LES protocol we will also receive the connection from another
les-server. In this case even the local node is not synced yet, we should keep the tcp
connection for other protocols(e.g. eth protocol).
- Don't count "invalid message" for non-existing GetBlockHeadersMsg request
In the eth syncing mechanism (full sync, fast sync, light sync), it will try to fetch
some non-existent blocks or headers(to ensure we indeed download all the missing chain).
In this case, it's possible that the les-server will receive the request for
non-existent headers. So don't count it as the "invalid message" for scheduling
dropping.
- Copy the announce object in the closure
Before the les-server pushes the latest headers to all connected clients, it will create
a closure and queue it in the underlying request scheduler. In some scenarios it's
problematic. E.g, in private networks, the block can be mined very fast. So before the
first closure is executed, we may already update the latest_announce object. So actually
the "announce" object we want to send is replaced.
The downsize is the client will receive two announces with the same td and then drop the
server.
P2P Simulation Framework
- Don't double register the protocol services in p2p-simulation "Start".
The protocols upon the devp2p are registered in the "New node stage". So don't reigster
them again when starting a node in the p2p simulation framework
- Add one more new config field "ExternalSigner", in order to use clef service in the
framework.
* core/state/snapshot: introduce snapshot journal version
* core: update the disk layer in an atomic way
* core: persist the disk layer generator periodically
* core/state/snapshot: improve logging
* core/state/snapshot: forcibly ensure the legacy snapshot is matched
* core/state/snapshot: add debug logs
* core, tests: fix tests and special recovery case
* core: polish
* core: add more blockchain tests for snapshot recovery
* core/state: fix comment
* core: add recovery flag for snapshot
* core: add restart after start-after-crash tests
* core/rawdb: fix imports
* core: fix tests
* core: remove log
* core/state/snapshot: fix snapshot
* core: avoid callbacks in SetHead
* core: fix setHead cornercase where the threshold root has state
* core: small docs for the test cases
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/state/snapshot: add diskRoot function
* core/state/snapshot: disable iteration if the snapshot is generating
* core/state/snapshot: simplify the function
* core/state: panic for undefined layer
The old one was wrong in two ways: the first block in chain.rlp was the
genesis block, and the genesis difficulty was below minimum difficulty.
This also contains some other fixes to the test.
* accounts/keystore: add timeout to test to prevent failure on travis
The TestWalletNotifications test sporadically fails on travis.
This is because we shutdown the event collection before all events are received.
Adding a small timeout (10 milliseconds) allows the collector to be scheduled
and to consume all pending events before we shut it down.
* accounts/keystore: added newlines back in
* accounts/keystore: properly fix the walletNotifications test
* miner: exit loop when downloader Done or Failed
Following the logic of the comment at the method,
this fixes a regression introduced at 7cf56d6f06
, which would allow external parties to DoS with
blocks, preventing mining progress.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: remove ineff assign (lint)
Signed-off-by: meows <b5c6@protonmail.com>
* miner: update test re downloader events
Signed-off-by: meows <b5c6@protonmail.com>
* Revert "miner: remove ineff assign (lint)"
This reverts commit eaefcd34ab4862ebc936fb8a07578aa2744bc058.
* Revert "miner: exit loop when downloader Done or Failed"
This reverts commit 23abd34265aa246c38fc390bb72572ad6ae9fe3b.
* miner: add test showing imprecise TestMiner
Signed-off-by: meows <b5c6@protonmail.com>
* miner: fix waitForMiningState precision
This helper function would return an affirmation
on the first positive match on a desired bool.
This was imprecise; it return false positives
by not waiting initially for an 'updated' value.
This fix causes TestMiner_2 to fail, which is
expected.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: remove TestMiner_2 demonstrating broken test
This test demonstrated the imprecision of the test
helper function waitForMiningState. This function
has been fixed with 6d365c2851, and this test test
may now be removed.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: fix test regarding downloader event/mining expectations
See comment for logic.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: add test describing expectations for downloader/mining events
We expect that once the downloader emits a DoneEvent,
signaling a successful sync, that subsequent StartEvents
are not longer permitted to stop the miner.
This prevents a security vulnerability where forced syncs via
fake high blocks would stall mining operation.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: use 'canStop' state to fix downloader event handling
- Break downloader event handling into event
separating Done and Failed events. We need to
treat these cases differently since a DoneEvent
should prevent the miner from being stopped on
subsequent downloader Start events.
- Use canStop state to handle the one-off
case when a downloader first succeeds.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: improve comment wording
Signed-off-by: meows <b5c6@protonmail.com>
* miner: start mining on downloader events iff not already mining
Signed-off-by: meows <b5c6@protonmail.com>
* miner: refactor miner update logic w/r/t downloader events
This makes mining pause/start logic regarding downloader
events more explicit. Instead of eternally handling downloader
events after the first done event, the subscription is closed
when downloader events are no longer actionable.
Signed-off-by: meows <b5c6@protonmail.com>
* miner: fix handling downloader events on subcription closed
Signed-off-by: meows <b5c6@protonmail.com>
* miner: (lint:gosimple) use range over chan instead of for/select
Signed-off-by: meows <b5c6@protonmail.com>
* miner: refactor update loop to remove race condition
The go routine handling the downloader events handling
vars in parallel with the parent routine, causing a
race condition.
This change, though ugly, remove the condition while
still allowing the downloader event subscription to be
closed when the miner has no further use for it (ie DoneEvent).
* miner: alternate fix for miner-flaw
Co-authored-by: meows <b5c6@protonmail.com>
* peer: return localAddr instead of name to prevent spam
We currently use the name (which can be freely set by the peer) in several log messages.
This enables malicious actors to write spam into your geth log.
This commit returns the localAddr instead of the freely settable name.
* p2p: reduce usage of peer.Name in warn messages
* eth, p2p: use truncated names
* Update peer.go
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Felix Lange <fjl@twurst.com>
For some reason, using the shared hash causes a cryptographic incompatibility
when using Go 1.15. I noticed this during the development of Discovery v5.1
when I added test vector verification.
The go library commit that broke this is golang/go@97240d5, but the
way we used HKDF is slightly dodgy anyway and it's not a regression.
* core/types: tests for bloom
* core/types: refactored bloom filter for receipts, added tests
core/types: replaced old bloom implementation
core/types: change interface of bloom add+test
* core/types: refactor bloom
* core/types: minor tweak on LogsBloom
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* core/state/snapshot: exit Geth if generator hits missing trie nodes
* core/state/snapshot: error instead of hard die on generator fault
* core/state/snapshot: don't enable logging on the tests
* trie: update tests to check commit integrity
* trie: polish committer
* trie: fix typo
* trie: remove hasvalue notion
According to the benchmarks, type assertion between the pointer and
interface is extremely fast.
BenchmarkIntmethod-12 1000000000 1.91 ns/op
BenchmarkInterface-12 1000000000 2.13 ns/op
BenchmarkTypeSwitch-12 1000000000 1.81 ns/op
BenchmarkTypeAssertion-12 2000000000 1.78 ns/op
So the overhead for asserting whether the shortnode has "valuenode"
child is super tiny. No necessary to have another field.
* trie: linter nitpicks
Co-authored-by: Martin Holst Swende <martin@swende.se>
* accounts, signer: implement gnosis safe support
* common/math: add type for marshalling big to dec
* accounts, signer: properly sign gnosis requests
* signer, clef: implement account_signGnosisTx
* signer: fix auditlog print, change rpc-name (signGnosisTx to signGnosisSafeTx)
* signer: pass validation-messages/warnings to the UI for gnonsis-safe txs
* signer/core: minor change to validationmessages of typed data
core/types: use stacktrie for derivesha
trie: add stacktrie file
trie: fix linter
core/types: use stacktrie for derivesha
rebased: adapt stacktrie to the newer version of DeriveSha
Co-authored-by: Martin Holst Swende <martin@swende.se>
More linter fixes
review feedback: no key offset for nodes converted to hashes
trie: use EncodeRLP for full nodes
core/types: insert txs in order in derivesha
trie: tests for derivesha with stacktrie
trie: make stacktrie use pooled hashers
trie: make stacktrie reuse tmp slice space
trie: minor polishes on stacktrie
trie/stacktrie: less rlp dancing
core/types: explain the contorsions in DeriveSha
ci: fix goimport errors
trie: clear mem on subtrie hashing
squashme: linter fix
stracktrie: use pooling, less allocs (#3)
trie: in-place hex prefix, reduce allocs and add rawNode.EncodeRLP
Reintroduce the `[]node` method, add the missing `EncodeRLP` implementation for `rawNode` and calculate the hex prefix in place.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This allows users to estimate gas on top of arbitrary blocks as well as pending and latest.
Tracing on pending is useful for most users as it takes into account the current txpool while
tracing on latest might be useful for users that have little to know knowledge of the current
transactions in the network.
If blockNrOrHash is not specified, estimateGas defaults to pending
This change moves the RLPx protocol implementation into a separate package,
p2p/rlpx. The new package can be used to establish RLPx connections for
protocol testing purposes.
Co-authored-by: Felix Lange <fjl@twurst.com>
* database: added counters
* Improved stats for ancient db
* Small improvement
* Better message and added percentage while counting receipts
* Fast counting for receipts
* added info message
* Show both receips itemscount from ancient db and counted receipts
* Fixed default case
* Removed counter for receipts in ancient store
* Removed counting of receipts present in leveldb
When the license was added to the repository, its text was changed (some
sections at the end removed) and, worse, the authors of go-ethereum
tried to claim copyright on the license text.
The correct way to apply GPL to a project is to copy it verbatim.
This change reverts the text of the GPL to the original.
This PR adds an extra guarantee to NodeStateMachine: it ensures that all
immediate effects of a certain change are processed before any subsequent
effects of any of the immediate effects on the same node. In the original
version, if a cascaded change caused a subscription callback to be called
multiple times for the same node then these calls might have happened in a
wrong chronological order.
For example:
- a subscription to flag0 changes flag1 and flag2
- a subscription to flag1 changes flag3
- a subscription to flag1, flag2 and flag3 was called in the following order:
[flag1] -> [flag1, flag3]
[] -> [flag1]
[flag1, flag3] -> [flag1, flag2, flag3]
This happened because the tree of changes was traversed in a "depth-first
order". Now it is traversed in a "breadth-first order"; each node has a
FIFO queue for pending callbacks and each triggered subscription callback
is added to the end of the list. The already existing guarantees are
retained; no SetState or SetField returns until the callback queue of the
node is empty again. Just like before, it is the responsibility of the
state machine design to ensure that infinite state loops are not possible.
Multiple changes affecting the same node can still happen simultaneously;
in this case the changes can be interleaved in the FIFO of the node but the
correct order is still guaranteed.
A new unit test is also added to verify callback order in the above scenario.
This PR changes several different things:
- Adds test cases for the miner loop
- Stops the worker if it wasn't already stopped in worker.Close()
- Uses channels instead of atomics in the miner.update() loop
Co-authored-by: Felix Lange <fjl@twurst.com>
* core/vm/testdata: add gascost expectations to testcases
* core/vm: verify expected gas in tests for precompiles
* core/vm: fix overflow flaw in gas/s calculation
* whisper: remove whisper
* Update cmd/geth/config.go
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
* cmd/geth: warn on enabling whisper + remove more whisper deps
* mobile: remove all whisper references
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This changes how the downloader works, a little bit. Previously, when block sync started,
we immediately started filling up to 8192 blocks. Usually this is fine, blocks are small
in the early numbers. The threshold then is lowered as we measure the size of the blocks
that are filled.
However, if the node is shut down and restarts syncing while we're in a heavy segment,
that might be bad. This PR introduces a more conservative initial threshold of 2K blocks
instead.
* "Downloader queue stats" is now a DEBUG information
I think this info is more a DEBUG related information then an INFO. If it must remains an INFO, maybe it can be slow down to one time every 5 minutes or so.
* Update queue.go
"Downloader queue stats" information is now provided once every minute instead of once every 10 seconds.
* accounts/abi: fix a bug in getTypeSize method
e.g. for "Tuple[2]" type, the element of the array is a tuple type and the size of the tuple may not be 32.
* accounts/abi: add unit test of getTypeSize method
This change improves discovery behavior in small networks. Very small
networks would often fail to bootstrap because all member nodes were
dropping table content due to findnode failure. The check is now changed
to avoid dropping nodes on findnode failure when their bucket is almost
empty. It also relaxes the liveness check requirement for FINDNODE/v4
response nodes, returning unverified nodes as results when there aren't
any verified nodes yet.
The "findnode failed" log now reports whether the node was dropped
instead of the number of results. The value of the "results" was
always zero by definition.
Co-authored-by: Felix Lange <fjl@twurst.com>
* metrics: zero temp variable in updateMeter
Previously the temp variable was not updated properly after summing it to count.
This meant we had astronomically high metrics, now we zero out the temp whenever we
sum it onto the snapshot count
* metrics: move temp variable to be aligned, unit tests
Moves the temp variable in MeterSnapshot to be 64-bit aligned because of the atomic bug.
Adds a unit test, that catches the previous bug.
* chaincmd should make config nodes instead of full nodes
* add documentation for using makeConfigNode instead of makeFullNode;
* add documentation to functions
* code style
This adds a lock around requests because some routers can't handle
concurrent requests. Requests are also rate-limited.
The Map function request a new mapping exactly when the map timeout
occurs instead of 5 minutes earlier. This should prevent duplicate mappings.
* core: avoid modification of accountSet cache in tx_pool
when runReorg, we may copy the dirtyAccounts' accountSet cache to promoteAddrs
in which accounts will be promoted, however, if we have reset request at the
same time, we may reuse promoteAddrs and modify the cache content which is
against the original intention of accountSet cache. So, we need to make a new
slice here to avoid modify accountSet cache.
* core: fix flatten condition + comment
Co-authored-by: Felix Lange <fjl@twurst.com>
This PR significantly changes the APIs for instantiating Ethereum nodes in
a Go program. The new APIs are not backwards-compatible, but we feel that
this is made up for by the much simpler way of registering services on
node.Node. You can find more information and rationale in the design
document: https://gist.github.com/renaynay/5bec2de19fde66f4d04c535fd24f0775.
There is also a new feature in Node's Go API: it is now possible to
register arbitrary handlers on the user-facing HTTP server. In geth, this
facility is used to enable GraphQL.
There is a single minor change relevant for geth users in this PR: The
GraphQL API is no longer available separately from the JSON-RPC HTTP
server. If you want GraphQL, you need to enable it using the
./geth --http --graphql flag combination.
The --graphql.port and --graphql.addr flags are no longer available.
This replaces the two-stage shutdown scheme with the one we
use almost everywhere else: a single quit channel signalling
termination.
Co-authored-by: Felix Lange <fjl@twurst.com>
* Disable symbol table and DWARF generation by default.
Trimpath if compiling with Go >= 1.13
* Set Go to minimum version 1.13. Revert debug symbol changes.
* init
notes
removed some mentions of eth62, bumped protocol err too old to >=63
* remove sanity checks and bump supported protocol version up to 63
* remove 62 tests, still need to add 65
* remove 65 tests
Solves issue#20582. Non-executable transactions should not be evicted on each tick if there are no promote transactions or if a pending/reset empties the pending list. Tests and logging expanded to handle these cases in the future.
core/tx_pool: use a ts for each tx in the queue, but only update the heartbeat on promotion or pending replaced
queuedTs proper naming
* eth/downloader: refactor downloader + queue
downloader, fetcher: throttle-metrics, fetcher filter improvements, standalone resultcache
downloader: more accurate deliverytime calculation, less mem overhead in state requests
downloader/queue: increase underlying buffer of results, new throttle mechanism
eth/downloader: updates to tests
eth/downloader: fix up some review concerns
eth/downloader/queue: minor fixes
eth/downloader: minor fixes after review call
eth/downloader: testcases for queue.go
eth/downloader: minor change, don't set progress unless progress...
eth/downloader: fix flaw which prevented useless peers from being dropped
eth/downloader: try to fix tests
eth/downloader: verify non-deliveries against advertised remote head
eth/downloader: fix flaw with checking closed-status causing hang
eth/downloader: hashing avoidance
eth/downloader: review concerns + simplify resultcache and queue
eth/downloader: add back some locks, address review concerns
downloader/queue: fix remaining lock flaw
* eth/downloader: nitpick fixes
* eth/downloader: remove the *2*3/4 throttling threshold dance
* eth/downloader: print correct throttle threshold in stats
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This fixes the iOS framework build by naming the second parameter of the
Signer interface method. The name is important because it becomes part
of the objc method signature.
Fixes#21340
* geth,utils: implement configurable developer account options
Prior to this change --dev (developer) mode
generated one account with an empty password,
irrespective of existing --password and --miner.etherbase
options.
This change makes --dev mode compatible with these
existing flags.
--dev mode may now be used in conjunction with
--password and --miner.etherbase flags to configure
the developer faucet using an existing keystore or
in creating a new account.
Signed-off-by: meows <b5c6@protonmail.com>
* main: remove key/pass flags from usage developer section
These flags are included already in other sections,
and it is not desired to duplicate them.
They were originally included in this section
along with added support for these flags in the
developer mode.
Signed-off-by: meows <b5c6@protonmail.com>
* core: added local tx pool test case
* core, crypto: various allocation savings regarding tx handling
* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
This fixes two issues with state sync restarts:
When sync restarts with a new root, some peers can have in-flight requests.
Since all peers with active requests were marked idle when exiting sync,
the new sync would schedule more requests for those peers. When the
response for the earlier request arrived, the new sync would reject it and
mark the peer idle again, rendering the peer useless until it disconnected.
The other issue was that peers would not be marked idle when they had
delivered a response, but the response hadn't been processed before
restarting the state sync. This also made the peer useless because it
would be permanently marked busy.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a test suite for discovery v4. The test suite is a port of the Hive suite for
discovery, and will replace the current suite on Hive soon-ish. The tests can be
run locally with this command:
devp2p discv4 test -remote enode//...
Co-authored-by: Felix Lange <fjl@twurst.com>
This change further improves the performance of RLP encoding by removing
allocations for big.Int and [...]byte types. I have added a new benchmark
that measures RLP encoding of types.Block to verify that performance is
improved.
Exposing /debug/metrics and /debug/metrics/prometheus was dependent
on --pprof, which also exposes other HTTP APIs. This change makes it possible
to run the metrics server on an independent endpoint without enabling pprof.
This PR reduces the bandwidth used by the light client to compute the
recommended gas price. The current mechanism for suggesting the price is:
- retrieve recent 20 blocks
- get the lowest gas price of these blocks
- sort the price array and return the middle(60%) one
This works for full nodes, which have all blocks available locally.
However, this is very expensive for the light client because the light
client needs to retrieve block bodies from the network.
The PR changes the default options for light client. With the new config,
the light client only retrieves the two latest blocks, but in order to
collect more sample transactions, the 3 lowest prices are collected from
each block.
This PR also changes the behavior for empty blocks. If the block is empty,
the lastest price is reused for sampling.
* core: use uint64 for total tx costs instead of big.Int
* core: added local tx pool test case
* core, crypto: various allocation savings regarding tx handling
* Update core/tx_list.go
* core: added tx.GasPriceIntCmp for comparison without allocation
adds a method to remove unneeded allocation in comparison to tx.gasPrice
* core: handle pools full of locals better
* core/tests: benchmark for tx_list
* core/txlist, txpool: save a reheap operation, avoid some bigint allocs
Co-authored-by: Martin Holst Swende <martin@swende.se>
List headers made up 11% of all allocations during sync. This change
removes most of those allocations by keeping the list header values
cached in the encoder buffer instead. Since encoder buffers are pooled,
list headers are no longer allocated in the common case where an
encoder buffer is available for reuse.
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth/downloaded: fixed datarace between synchronize and Progress
There was a race condition between `downloader.synchronize()` and `Progress` `syncWithPeer` `fetchHeight` `findAncestors` and `processHeaders`
This PR changes the behavior of the downloader a bit.
Previously the functions `Progress` `syncWithPeer` `fetchHeight` `findAncestors` and `processHeaders` read the syncMode anew within their loops. Now they read the syncMode at the start of their function and don't change it during their runtime.
* eth/downloaded: comment
* eth/downloader: added comment
* core, crypto: various allocation savings regarding tx handling
* core: reduce allocs for gas price comparison
This change reduces the allocations needed for comparing different transactions to each other.
A call to `tx.GasPrice()` copies the gas price as it has to be safe against modifications and
also needs to be threadsafe. For comparing and ordering different transactions we don't need
these guarantees
* core: added tx.GasPriceIntCmp for comparison without allocation
adds a method to remove unneeded allocation in comparison to tx.gasPrice
* core/types: pool legacykeccak256 objects in rlpHash
rlpHash is by far the most used function in core that allocates a legacyKeccak256 object on each call.
Since it is so widely used it makes sense to add pooling here so we relieve the GC.
On my machine these changes result in > 100 MILLION less allocations and > 30 GB less allocated memory.
* reverted some changes
* reverted some changes
* trie: use crypto.KeccakState instead of replicating code
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR implements the EVM state transition tool, which is intended
to be the replacement for our retesteth client implementation.
Documentation is present in the cmd/evm/README.md file.
Co-authored-by: Felix Lange <fjl@twurst.com>
Without use of global, these flags didn't actually modify
miner configuration, since we weren't grabbing from the
proper context scope, which should be global (vs. subcommand).
Signed-off-by: meows <b5c6@protonmail.com>
The import command should not return a 0 status
code if the import finishes prematurely becaues
of an import error.
Returning the error causes the program to exit with 1
if the err is non nil.
Signed-off-by: meows <b5c6@protonmail.com>
* core/vm: fix incorrect computation of discount
During testing on Yolov1 we found that the way geth calculates the discount
is not in line with the specification. Basically what we did is calculate
128 * Bls12381GXMulGas * discount / 1000 whenever we received more than 128 pairs
of values. Correct would be to calculate k * Bls12381... for k > 128.
* core/vm: better logic for discount calculation
* core/vm: better calculation logic, added worstcase benchmarks
* core/vm: better benchmarking logic
The ancients variable in the freezer is a list of hashes, which
identifies all of the hashes to be frozen. The slice is being allocated
with a capacity of `limit`, which is the number of the last block
this batch will attempt to add to the freezer. That means we are
allocating memory for all of the blocks in the freezer, not just
the ones to be added.
If instead we allocate `limit - f.frozen`, we will only allocate
enough space for the blocks we're about to add to the freezer. On
mainnet this reduces usage by about 320 MB.
* eth/downloader tests: fix spurious failing test due to race between receipts/headers
* miner tests: fix travis failure on arm64
* eth/downloader: tests - store td in ancients too
* core/vm: use fixed uint256 library instead of big
* core/vm: remove intpools
* core/vm: upgrade uint256, fixes uint256.NewFromBig
* core/vm: use uint256.Int by value in Stack
* core/vm: upgrade uint256 to v1.0.0
* core/vm: don't preallocate space for 1024 stack items (only 16)
Co-authored-by: Martin Holst Swende <martin@swende.se>
* internal/ethapi: return revert reason for eth_call
* internal/ethapi: moved revert reason logic to doCall
* accounts/abi/bind/backends: added revert reason logic to simulated backend
* internal/ethapi: fixed linting error
* internal/ethapi: check if require reason can be unpacked
* internal/ethapi: better error logic
* internal/ethapi: simplify logic
* internal/ethapi: return vmError()
* internal/ethapi: move handling of revert out of docall
* graphql: removed revert logic until spec change
* rpc: internal/ethapi: added custom error types
* graphql: use returndata instead of return
Return() checks if there is an error. If an error is found, we return nil.
For most use cases it can be beneficial to return the output even if there
was an error. This code should be changed anyway once the spec supports
error reasons in graphql responses
* accounts/abi/bind/backends: added tests for revert reason
* internal/ethapi: add errorCode to revert error
* internal/ethapi: add errorCode of 3 to revertError
* internal/ethapi: unified estimateGasErrors, simplified logic
* internal/ethapi: unified handling of errors in DoEstimateGas
* rpc: print error data field
* accounts/abi/bind/backends: unify simulatedBackend and RPC
* internal/ethapi: added binary data to revertError data
* internal/ethapi: refactored unpacking logic into newRevertError
* accounts/abi/bind/backends: fix EstimateGas
* accounts, console, internal, rpc: minor error interface cleanups
* Revert "accounts, console, internal, rpc: minor error interface cleanups"
This reverts commit 2d3ef53c53.
* re-apply the good parts of 2d3ef53c53
* rpc: add test for returning server error data from client
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
Once we detect an invalid transaction during recovering signatures, we should
directly exclude this transaction to avoid validating the signatures hereafter.
This should optimize the validations times of transactions with invalid signatures
to only one time.
* replace gosigar with gopsutil
* removed check for whether GOOS is openbsd
* removed accidental import of runtime
* potential fix for difference in units between gosig and gopsutil
* fixed lint error
* remove multiplication factor
* uses cpu.ClocksPerSec as the multiplication factor
* changed dependency from shirou to renaynay (#20)
* updated dep
* switching back from using renaynay fork to using upstream as PRs were merged on upstream
* removed empty line
* optimized imports
* tidied go mod
This PR makes use of go 1.13 error handling, wrapping errors and using
errors.Is to check a wrapped root-cause. It also removes the travis
builders for go 1.11 and go 1.12.
This adds a new API method on core.BlockChain to allow interrupting
running data inserts, and calls the method before shutting down the
downloader.
The BlockChain interrupt checks are now done through a method instead
of inlining the atomic load everywhere. There is no loss of efficiency from
this and it makes the interrupt protocol a lot clearer because the check is
defined next to the method that sets the flag.
This PR reimplements the light client server pool. It is also a first step
to move certain logic into a new lespay package. This package will contain
the implementation of the lespay token sale functions, the token buying and
selling logic and other components related to peer selection/prioritization
and service quality evaluation. Over the long term this package will be
reusable for incentivizing future protocols.
Since the LES peer logic is now based on enode.Iterator, it can now use
DNS-based fallback discovery to find servers.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
* abi/bind/backends: testcase for double-lock
* accounts: add blockByNumberNoLock to avoid double-lock
* backend/simulated: use stateroot, not blockhash for retrieveing state
Co-authored-by: Martin Holst Swende <martin@swende.se>
* cmd/clef, signer/core: use better terminal input for passwords, make it possible to avoid boot-up warning
* all: move commonly used prompter to isolated (small) package
* cmd/clef: Add new --acceptWarn to clef README
* cmd/clef: rename flag 'acceptWarn' to 'suppress-bootwarn'
Co-authored-by: ligi <ligi@ligi.de>
* accounts/abi: simplified reflection logic
* accounts/abi: simplified reflection logic
* accounts/abi: removed unpack
* accounts/abi: removed comments
* accounts/abi: removed uneccessary complications
* accounts/abi: minor changes in error messages
* accounts/abi: removed unnused code
* accounts/abi: fixed indexed argument unpacking
* accounts/abi: removed superfluous test cases
This commit removes two test cases. The first one is trivially invalid as we have the same
test cases as passing in packing_test.go L375. The second one passes now,
because we don't need the mapArgNamesToStructFields in unpack_atomic anymore.
Checking for purely underscored arg names generally should not be something we do
as the abi/contract is generally out of the control of the user.
* accounts/abi: removed comments, debug println
* accounts/abi: added commented out code
* accounts/abi: addressed comments
* accounts/abi: remove unnecessary dst.CanSet check
* accounts/abi: added dst.CanSet checks
* accounts/abi: allow overloaded argument names
In solidity it is possible to create the following contract:
```
contract Overloader {
struct F { uint _f; uint __f; uint f; }
function f(F memory f) public {}
}
```
This however resulted in a panic in the abi package.
* accounts/abi fixed error handling
* accounts/abi/bind: added test cases for waitDeployed
* accounts/abi/bind: added test case for boundContract
* accounts/abi/bind: removed unnecessary resolve methods
* accounts/abi: moved topics from /bind to /abi
* accounts/abi/bind: cleaned up format... functions
* accounts/abi: improved log message
* accounts/abi: added type tests
* accounts/abi/bind: remove superfluous template methods
* cmd, miner: add noempty-precommit flag
* cmd, miner: get rid of external flag
* miner: change bool to atomic int
* miner: fix tiny typo
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* cmd, core, eth: init tx lookup in background
* core/rawdb: tiny log fixes to make it clearer what's happening
* core, eth: fix rebase errors
* core/rawdb: make reindexing less generic, but more optimal
* rlp: implement rlp list iterator
* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data
* core/rawdb, cmd/utils: fix review concerns
* cmd/utils: fix merge issue
* core/rawdb: add some log formatting polishes
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* p2p: add low port check in dialer
We already have a check like this for UDP ports, add a similar one in
the dialer. This prevents dials to port zero and it's also an extra
layer of protection against spamming HTTP servers.
* p2p/discover: use errLowPort in v4 code
* p2p: change port check
* p2p: add comment
* p2p/simulations/adapters: ensure assigned port is in all node records
* core/rawdb: Stop freezer process as part of freezer.Close()
When you call db.Close(), it was closing the leveldb database first,
then closing the freezer, but never stopping the freezer process.
This could cause the freezer to attempt to write to leveldb after
leveldb had been closed, leading to a crash with a non-zero exit code.
This change adds a quit channel to the freezer, and freezer.Close()
will not return until the freezer process has stopped.
Additionally, when you call freezerdb.Close(), it will close the
AncientStore before closing leveldb, to ensure that the freezer goroutine
will be stopped before leveldb is closed.
* core/rawdb: Fix formatting for golint
* core/rawdb: Use backoff flag to avoid repeating select
* core/rawdb: Include accidentally omitted backoff
* accounts/abi/bind/backend, internal/ethapi: recap gas limit with balance
* accounts, internal: address comment and fix lint
* accounts, internal: extend log message
* tiny nits to format hexutil.Big and nil properly
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* core/state: more verbose stateb errors
* core/state: fix flaw
* core/state: fixed lint
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
This finally adds the error check that the documentation of StateDB.dbErr
promises to do. dbErr was added in 9e5f03b6c (June 2017), and the check was
already missing in that commit. We somehow survived without it for three years.
* accounts/abi/bind: add void if no return args specified
Currently the java generator generates invalid input on pure/view functions
that have no return type. e.g. `function f(uint u) view public {}`
This is not a problem in practice as people rarely ever write functions like this.
* accounts/abi/bind: use elseif instead of nested if
* rpc flags related to starting http server renamed to http
* old rpc flags aliased and still functional
* pprof flags fixed
* renames gpo related flags
* linted
* renamed rpc flags for consistency and clarity
* added warn logs
* added more warn logs for all deprecated flags for consistency
* moves legacy flags to separate file, hides older flags under show-deprecated-flags command
* legacy prefix and moved some more legacy flags to legacy file
* fixed circular import
* added docs
* fixed imports lint error
* added notes about when flags were deprecated
* cmd/utils: group flags by deprecation date + reorder by date,
* modified deprecated comments for consistency, added warn log for --rpc
* making sure deprecated flags are still functional
* show-deprecated-flags command cleaned up
* fixed lint errors
* corrected merge conflict
* IsSet --> GlobalIsSet
* uncategorized flags, if not deprecated, displayed under misc
Co-authored-by: Martin Holst Swende <martin@swende.se>
* core/state/snapshot: implement storage iterator
* core/state/snapshot, tests: implement helper function
* core/state/snapshot: fix storage issue
If an account is deleted in the tx_1 but recreated in the tx_2,
the it can happen that in this diff layer, both destructedSet
and storageData records this account. In this case, the storage
iterator should be able to iterate the slots belong to new account
but disable further iteration in deeper layers(belong to old account)
* core/state/snapshot: address peter and martin's comment
* core/state: address comments
* core/state/snapshot: fix test
golang-lru is now a go module, and the upgrade corrects a couple
of minor issues. In particular, the library could crash if you inserted
nil into an LRU cache.
This is a resubmit of #20668 which rewrites the problematic test
without any additional goroutines. It also documents the test better.
The purpose of this test is checking whether log events are sent
correctly when importing blocks. The test was written at a time when
blockchain events were delivered asynchronously, making the check hard
to pull off. Now that core.BlockChain delivers events synchronously
during the call to InsertChain, the test can be simplified.
Co-authored-by: BurtonQin <bobbqqin@gmail.com>
This corrects the call to eth_getBlockByNumber, which previously
returned this error:
can't get latest block: missing value for required argument 1
Co-authored-by: Felix Lange <fjl@twurst.com>
This fixes a theoretical double lock condition which could occur in
indexer.AddChildIndexer(indexer)
Nobody would ever do that though.
Co-authored-by: Felix Lange <fjl@twurst.com>
* accounts/abi: added documentation
* accounts/abi: reduced usage of arguments.LengthNonIndexed
* accounts/abi: simplified reflection logic
* accounts/abi: moved testjson data into global declaration
* accounts/abi: removed duplicate test cases
* accounts/abi: reworked abi tests
* accounts/abi: added more tests for abi packing
* accounts/abi/bind: refactored base tests
* accounts/abi: run pack tests as subtests
* accounts/abi: removed duplicate tests
* accounts/abi: removed unnused arguments.LengthNonIndexed
Due to refactors to the code, we do not need the arguments.LengthNonIndexed function anymore.
You can still get the length by calling len(arguments.NonIndexed())
* accounts/abi: added type test
* accounts/abi: modified unpack test to pack test
* accounts/abi: length check on arrayTy
* accounts/abi: test invalid abi
* accounts/abi: fixed rebase error
* accounts/abi: fixed rebase errors
* accounts/abi: removed unused definition
* accounts/abi: merged packing/unpacking tests
* accounts/abi: fixed [][][32]bytes encoding
* accounts/abi: added tuple test cases
* accounts/abi: renamed getMockLog -> newMockLog
* accounts/abi: removed duplicate test
* accounts/abi: bools -> booleans
Rather than just closing the underlying network listener to stop our
HTTP servers, use the graceful shutdown procedure, waiting for any
in-process requests to finish.
It is possible to specify enode URLs using domain name since
commit b90cdbaa79, but the code comment still said that only
IP addresses are allowed.
Co-authored-by: admin@komgo.io <KomgoRocks2018!>
* trie: initial implementation for range proof
* trie: add benchmark
* trie: fix lint
* trie: fix minor issue
* trie: unset the edge valuenode as well
* trie: unset the edge valuenode as nilValuenode
* core: fix the condition of reorg
* core: fix nitpick to only retrieve head once
* core: don't reorg if received chain is longer at same diff
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* all: seperate consensus error and evm internal error
There are actually two types of error will be returned when
a tranaction/message call is executed: (a) consensus error
(b) evm internal error. The former should be converted to
a consensus issue, e.g. The sender doesn't enough asset to
purchase the gas it specifies. The latter is allowed since
evm itself is a blackbox and internal error is allowed to happen.
This PR emphasizes the difference by introducing a executionResult
structure. The evm error is embedded inside. So if any error
returned, it indicates consensus issue happens.
And also this PR improve the `EstimateGas` API to return the concrete
revert reason if the transaction always fails
* all: polish
* accounts/abi/bind/backends: add tests
* accounts/abi/bind/backends, internal: cleanup error message
* all: address comments
* core: fix lint
* accounts, core, eth, internal: address comments
* accounts, internal: resolve revert reason if possible
* accounts, internal: address comments
* accounts/abi: prevent recalculation of ID, Sig and String
* accounts/abi: fixed unpacking of no values
* accounts/abi: multiple fixes to arguments
* accounts/abi: refactored methodName and eventName
This commit moves the complicated logic of how we assign method names
and event names if they already exist into their own functions for
better readability.
* accounts/abi: prevent recalculation of internal
In this commit, I changed the way we calculate the string
representations, sig representations and the id's of methods. Before
that these fields would be recalculated everytime someone called .Sig()
.String() or .ID() on a method or an event.
Additionally this commit fixes issue #20856 as we assign names to inputs
with no name (input with name "" becomes "arg0")
* accounts/abi: added unnamed event params test
* accounts/abi: fixed rebasing errors in method sig
* accounts/abi: fixed rebasing errors in method sig
* accounts/abi: addressed comments
* accounts/abi: added FunctionType enumeration
* accounts/abi/bind: added test for unnamed arguments
* accounts/abi: improved readability in NewMethod, nitpicks
* accounts/abi: method/eventName -> overloadedMethodName
This adds two new methods to UDPv5, AllNodes and LocalNode.
AllNodes returns all the nodes stored in the local table; this is
useful for the purposes of metrics collection and also debugging any
potential issues with other discovery v5 implementations.
LocalNode returns the local node object. The reason for exposing this
is so that users can modify and set/delete new key-value entries in
the local record.
* accounts/abi: implement new fackball functions
In Solidity v0.6.0, the original fallback is separated
into two different sub types: fallback and receive.
This PR addes the support for parsing new format abi
and the relevant abigen functionalities.
* accounts/abi: fix unit tests
* accounts/abi: minor fixes
* accounts/abi, mobile: support jave binding
* accounts/abi: address marius's comment
* accounts/abi: Work around the uin64 conversion issue
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
This PR adds service value measurement statistics to the light client. It
also adds a private API that makes these statistics accessible. A follow-up
PR will add the new server pool which uses these statistics to select
servers with good performance.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* cmd/utils: make goerli the default testnet
* cmd/geth: explicitly rename testnet to ropsten
* core: explicitly rename testnet to ropsten
* params: explicitly rename testnet to ropsten
* cmd: explicitly rename testnet to ropsten
* miner: explicitly rename testnet to ropsten
* mobile: allow for returning the goerli spec
* tests: explicitly rename testnet to ropsten
* docs: update readme to reflect changes to the default testnet
* mobile: allow for configuring goerli and rinkeby nodes
* cmd/geth: revert --testnet back to ropsten and mark as legacy
* cmd/util: mark --testnet flag as deprecated
* docs: update readme to properly reflect the 3 testnets
* cmd/utils: add an explicit deprecation warning on startup
* cmd/utils: swap goerli and ropsten in usage
* cmd/geth: swap goerli and ropsten in usage
* cmd/geth: if running a known preset, log it for convenience
* docs: improve readme on usage of ropsten's testnet datadir
* cmd/utils: check if legacy `testnet` datadir exists for ropsten
* cmd/geth: check for legacy testnet path in console command
* cmd/geth: use switch statement for complex conditions in main
* cmd/geth: move known preset log statement to the very top
* cmd/utils: create new ropsten configurations in the ropsten datadir
* cmd/utils: makedatadir should check for existing testnet dir
* cmd/geth: add legacy testnet flag to the copy db command
* cmd/geth: add legacy testnet flag to the inspect command
* accounts/abi/bind: fixed erroneous packing of negative ints
* accounts/abi/bind: added test cases for negative ints in topics
* accounts/abi/bind: fixed genIntType for go 1.12
* accounts/abi: minor nitpick
This improves error messages when the file is too short or too long.
Also rewrite the test for SaveECDSA because LoadECDSA has its own
test now.
Co-authored-by: Felix Lange <fjl@twurst.com>
This change makes it possible to run geth with JSON-RPC over HTTP and
WebSocket on the same TCP port. The default port for WebSocket
is still 8546.
geth --rpc --rpcport 8545 --ws --wsport 8545
This also removes a lot of deprecated API surface from package rpc.
The rpc package is now purely about serving JSON-RPC and no longer
provides a way to start an HTTP server.
* accounts/abi/bind: refactored topics
* accounts/abi/bind: use store function to remove code duplication
* accounts/abi/bind: removed unused type defs
* accounts/abi/bind: error on tuples in topics
* Cosmetic changes to restart travis build
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
This adds an implementation of the current discovery v5 spec.
There is full integration with cmd/devp2p and enode.Iterator in this
version. In theory we could enable the new protocol as a replacement of
discovery v4 at any time. In practice, there will likely be a few more
changes to the spec and implementation before this can happen.
ToMessage is used to convert between ethapi.CallArgs and types.Message.
It reduces the length of the DoCall method by about half by abstracting out
the conversion between the CallArgs and the Message. This should improve the
code's maintainability and reusability.
The leaks were mostly in unit tests, and could all be resolved by
adding suitably-sized channel buffers or by restructuring the test
to not send on a channel after an error has occurred.
There is an unavoidable goroutine leak in Console.Interactive: when
we receive a signal, the line reader cannot be unblocked and will get
stuck. This leak is now documented and I've tried to make it slightly
less bad by adding a one-element buffer to the output channels of
the line-reading loop. Should the reader eventually awake from its
blocked state (i.e. when stdin is closed), at least it won't get stuck
trying to send to the interpreter loop which has quit long ago.
Co-authored-by: Felix Lange <fjl@twurst.com>
This adds a couple of metrics for tracking the timing
and frequency of method calls:
- rpc/requests gauge counts all requests
- rpc/success gauge counts requests which return err == nil
- rpc/failure gauge counts requests which return err != nil
- rpc/duration/all timer tracks timing of all requests
- rpc/duration/<method>/<success/failure> tracks per-method timing
This removes a bunch of weird code around the counter overflow check in
concatKDF and makes it actually work for different hash output sizes.
The overflow check worked as follows: concatKDF applies the hash function N
times, where N is roundup(kdLen, hashsize) / hashsize. N should not
overflow 32 bits because that would lead to a repetition in the KDF output.
A couple issues with the overflow check:
- It used the hash.BlockSize, which is wrong because the
block size is about the input of the hash function. Luckily, all standard
hash functions have a block size that's greater than the output size, so
concatKDF didn't crash, it just generated too much key material.
- The check used big.Int to compare against 2^32-1.
- The calculation could still overflow before reaching the check.
The new code in concatKDF doesn't check for overflow. Instead, there is a
new check on ECIESParams which ensures that params.KeyLen is < 512. This
removes any possibility of overflow.
There are a couple of miscellaneous improvements bundled in with this
change:
- The key buffer is pre-allocated instead of appending the hash output
to an initially empty slice.
- The code that uses concatKDF to derive keys is now shared between Encrypt
and Decrypt.
- There was a redundant invocation of IsOnCurve in Decrypt. This is now removed
because elliptic.Unmarshal already checks whether the input is a valid curve
point since Go 1.5.
Co-authored-by: Felix Lange <fjl@twurst.com>
- Dump stats also for --bench flag.
- From memory stats only show number and size of allocations. This is what `test -bench` shows. I doubt others like number of GC runs are any useful, but can be added if requested.
- Now the mem stats are for single execution in case of --bench.
* les: move execqueue into utilities package
execqueue is a util for executing queued functions
in a serial order which is used by both les server
and les client. Move it to common package.
* les: move randselect to utilities package
weighted_random_selector is a helpful tool for randomly select
items maintained in a set but based on the item weight.
It's used anywhere is LES package, mainly by les client but will
be used in les server with very high chance. So move it into a
common package as the second step for les separation.
* les: rename to utils
The test failed due to what appears to be fluctuations in time.Sleep, which is
not the actual method under test. This change modifies it so we compare the
metered Max to the actual time instead of the desired time.
This new API allows reading accounts and their content by address range.
Co-authored-by: Martin Holst Swende <martin@swende.se>
Co-authored-by: Felix Lange <fjl@twurst.com>
* eth: improve shutdown synchronization
Most goroutines started by eth.Ethereum didn't have any shutdown sync at
all, which lead to weird error messages when quitting the client.
This change improves the clean shutdown path by stopping all internal
components in dependency order and waiting for them to actually be
stopped before shutdown is considered done. In particular, we now stop
everything related to peers before stopping 'resident' parts such as
core.BlockChain.
* eth: rewrite sync controller
* eth: remove sync start debug message
* eth: notify chainSyncer about new peers after handshake
* eth: move downloader.Cancel call into chainSyncer
* eth: make post-sync block broadcast synchronous
* eth: add comments
* core: change blockchain stop message
* eth: change closeBloomHandler channel type
Turns out the way RDATA limits work is documented after all,
I just didn't search right. The trick to make it work is to
count UPSERTs twice.
This also adds an additional check to ensure TTL changes are
applied on existing records.
Prior to this change, eth_call changed the balance of the sender account in the
EVM environment to 2^256 wei to cover the gas cost of the call execution.
We've had this behavior for a long time even though it's super confusing.
This commit sets the default call gasprice to zero instead of updating the balance,
which is better because it makes eth_call semantics less surprising. Removing
the built-in balance assignment also makes balance overrides work as expected.
This just prevents a false negative ERROR warning when, for some unknown
reason, a user attempts to turn on the module rpc even though it's already going
to be on.
This PR fixes issues in TableDatabase.
TableDatabase is a wrapper of underlying ethdb.Database with an additional prefix.
The prefix is applied to all entries it maintains. However when we try to retrieve entries
from it we don't handle the key properly. In theory the prefix should be truncated and
only user key is returned. But we don't do it in some cases, e.g. the iterator and batch
replayer created from it. So this PR is the fix to these issues.
This revision of go-duktype fixes the following warning
```
duk_logging.c: In function ‘duk__logger_prototype_log_shared’:
duk_logging.c:184:64: warning: ‘Z’ directive writing 1 byte into a region of size between 0 and 9 [-Wformat-overflow=]
184 | sprintf((char *) date_buf, "%04d-%02d-%02dT%02d:%02d:%02d.%03dZ",
| ^
In file included from /usr/include/stdio.h:867,
from duk_logging.c:5:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:36:10: note: ‘__builtin___sprintf_chk’ output between 25 and 85 bytes into a destination of size 32
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
This makes eth_call and eth_estimateGas use the zero address
as sender when the "from" parameter is not supplied.
Co-authored-by: Felix Lange <fjl@twurst.com>
This removes the error added in #20597 in favor of a log message at
error level. Failing to start broke a bunch of people's setups and is
probably not the right thing to do for this check.
This adds additional logic to re-resolve the root name of a tree when a
couple of leaf requests have failed. We need this change to avoid
getting into a failure state where leaf requests keep failing for half
an hour when the tree has been updated.
* node: expose config in service context
* eth: integrate p2p/dnsdisc
* cmd/geth: add some DNS flags
* eth: remove DNS URLs
* cmd/utils: configure DNS names for testnets
* params: update DNS URLs
* cmd/geth: configure mainnet DNS
* cmd/utils: rename DNS flag and fix flag processing
* cmd/utils: remove debug print
* node: fix test
* p2p: new dial scheduler
This change replaces the peer-to-peer dial scheduler with a new and
improved implementation. The new code is better than the previous
implementation in two key aspects:
- The time between discovery of a node and dialing that node is
significantly lower in the new version. The old dialState kept
a buffer of nodes and launched a task to refill it whenever the buffer
became empty. This worked well with the discovery interface we used to
have, but doesn't really work with the new iterator-based discovery
API.
- Selection of static dial candidates (created by Server.AddPeer or
through static-nodes.json) performs much better for large amounts of
static peers. Connections to static nodes are now limited like dynanic
dials and can no longer overstep MaxPeers or the dial ratio.
* p2p/simulations/adapters: adapt to new NodeDialer interface
* p2p: re-add check for self in checkDial
* p2p: remove peersetCh
* p2p: allow static dials when discovery is disabled
* p2p: add test for dialScheduler.removeStatic
* p2p: remove blank line
* p2p: fix documentation of maxDialPeers
* p2p: change "ok" to "added" in static node log
* p2p: improve dialTask docs
Also increase log level for "Can't resolve node"
* p2p: ensure dial resolver is truly nil without discovery
* p2p: add "looking for peers" log message
* p2p: clean up Server.run comments
* p2p: fix maxDialedConns for maxpeers < dialRatio
Always allocate at least one dial slot unless dialing is disabled using
NoDial or MaxPeers == 0. Most importantly, this fixes MaxPeers == 1 to
dedicate the sole slot to dialing instead of listening.
* p2p: fix RemovePeer to disconnect the peer again
Also make RemovePeer synchronous and add a test.
* p2p: remove "Connection set up" log message
* p2p: clean up connection logging
We previously logged outgoing connection failures up to three times.
- in SetupConn() as "Setting up connection failed addr=..."
- in setupConn() with an error-specific message and "id=... addr=..."
- in dial() as "Dial error task=..."
This commit ensures a single log message is emitted per failure and adds
"id=... addr=... conn=..." everywhere (id= omitted when the ID isn't
known yet).
Also avoid printing a log message when a static dial fails but can't be
resolved because discv4 is disabled. The light client hit this case all
the time, increasing the message count to four lines per failed
connection.
* p2p: document that RemovePeer blocks
The feature update allows the GraphQL API endpoint to retrieve
transaction signature R,S,V parameters.
Co-authored-by: amitshah <amitshah0t7@gmail.com>
Co-authored-by: Felix Lange <fjl@twurst.com>
For longer records and subtree entries, the deployer created two
separate TXT records. This doesn't work as intended because the client
will receive the two records in arbitrary order. The fix is to encode
longer values as "string1""string2" instead of "string1", "string2".
This encoding creates a single record on AWS Route53.
Adds the 'geth dumpgenesis' command, which writes the configured
genesis in JSON format to stdout. This provides a way to generate the
data (structure and content) that can then be used with the 'geth init'
command.
* core/vm/runtime: add test for blockhash
* core/evm: less iteration in blockhash
* core/vm/runtime: nitpickfix
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
This change makes the client attempt to reconnect when a write fails.
We already had reconnect support, but the reconnect would previously
happen on the next call after an error. Being more eager leads to a
smoother experience overall.
This replaces the JavaScript interpreter used by the console with goja,
which is actively maintained and a lot faster than otto. Clef still uses otto
and eth/tracers still uses duktape, so we are currently dependent on three
different JS interpreters. We're looking to replace the remaining uses of otto
soon though.
* log: delete RotatingFileHandler
We added this for the dashboard, which is gone now. The
handler never really worked well and had data race and file
handling issues.
* internal/debug: remove unused RotatingFileHandler setup code
This change works around the 32k RDATA character limit per change
request and fixes several issues in the deployer which prevented it from
working for our production trees.
This is a temporary fix for a problem which started happening when the
dialer was changed to read nodes from an enode.Iterator. Before the
iterator change, discovery queries would always return within a couple
seconds even if there was no Internet access. Since the iterator won't
return unless a node is actually found, discoverTask can take much
longer. This means that the 'emergency connect' logic might not execute
in time, leading to a stuck node.
* build: remove env.sh
This removes the dirty symlink-to-self hack we've had for years. The
script was added to enable building without GOPATH and did that job
reliably for all this time. We can remove the workaround because modern
Go supports building without GOPATH natively.
* Makefile: add GO111MODULE=on to environment
* internal/testlog: print file+line number of log call in test log
This changes the unit test logger to print the actual file and line
number of the logging call instead of "testlog.go:44".
Output of 'go test -v -run TestServerListen ./p2p' before this change:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
testlog.go:44: DEBUG[01-08|15:16:31.651] UDP listener up addr=127.0.0.1:62678
testlog.go:44: DEBUG[01-08|15:16:31.651] TCP listener up addr=127.0.0.1:62678
testlog.go:44: TRACE[01-08|15:16:31.652] Accepted connection addr=127.0.0.1:62679
And after:
=== RUN TestServerListen
--- PASS: TestServerListen (0.00s)
server.go:868: DEBUG[01-08|15:25:35.679] TCP listener up addr=127.0.0.1:62712
server.go:557: DEBUG[01-08|15:25:35.679] UDP listener up addr=127.0.0.1:62712
server.go:912: TRACE[01-08|15:25:35.680] Accepted connection addr=127.0.0.1:62713
* internal/testlog: document use of t.Helper
* add node.go unit test file node_test.go
* add node_test.go file license and rollback trie_test.go
* fix unused variable v
* trie: fix license year
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
* les: move the checkpoint oracle into its own package
It's first step of refactor LES package. LES package
basically can be divided into LES client and LES server.
However both sides will use checkpoint package for
status retrieval and verification. So this PR moves
checkpoint oracle into a separate package
* les: address comments
This commit intents to replicate the DialHTTPWithClient function which allows
creating a RPC Client using a custom dialer but for websockets.
We introduce a new DialWebsocketWithDialer function which allows the caller
to instantiate a new websocket client using a custom dialer.
* Add more functionality to the sim (#5)
* backends: implement more of ethclient in sim
* backends: add BlockByNumber to simulated backend
* backends: make simulated progress function agree with syncprogress interface for client
* backends: add more tests
* backends: add more comments
* backends: fix sim for index in tx and add tests
* backends: add lock back to estimategas
* backends: goimports
* backends: go ci lint
* Add more functionality to the sim (#5)
* backends: implement more of ethclient in sim
* backends: add BlockByNumber to simulated backend
* backends: make simulated progress function agree with syncprogress interface for client
* backends: add more tests
* backends: add more comments
* backends: fix sim for index in tx and add tests
* backends: add lock back to estimategas
* backends: goimports
* backends: go ci lint
* assert errs
* p2p/dnsdisc: add support for enode.Iterator
This changes the dnsdisc.Client API to support the enode.Iterator
interface.
* p2p/dnsdisc: rate-limit DNS requests
* p2p/dnsdisc: preserve linked trees across root updates
This improves the way links are handled when the link root changes.
Previously, sync would simply remove all links from the current tree and
garbage-collect all unreachable trees before syncing the new list of
links.
This behavior isn't great in certain cases: Consider a structure where
trees A, B, and C reference each other and D links to A. If D's link
root changed, the sync code would first remove trees A, B and C, only to
re-sync them later when the link to A was found again.
The fix for this problem is to track the current set of links in each
clientTree and removing old links only AFTER all links are synced.
* p2p/dnsdisc: deflake iterator test
* cmd/devp2p: adapt dnsClient to new p2p/dnsdisc API
* p2p/dnsdisc: tiny comment fix
This change:
- removes the PostChainEvents method on core.BlockChain.
- sorts 'removed log' events by block number.
- fire the NewChainHead event if we inject a canonical block into the chain
even if the entire insertion is not successful.
- guarantees correct event ordering in all cases.
The original idea behind this change was to remove a use of the
deprecated CancelRequest method. Simply removing it would've been an
option, but I couldn't resist and did a bit of a refactoring instead.
All remote sealing code was contained in a single giant function. Remote
sealing is now extracted into its own object, remoteSealer.
* go.mod, vendor: switch to Go modules
* travis: explicitly enable go modules in Go 1.11 and 1.12
* accounts/abi/bind: switch binding test to go modules
* travis, build: aggregate and upload go mod dependencies for PPA
* go.mod: tidy up the modules to avoid xgo writes to go.sum
* build, internal/build: drop own file/folder copier
* travis: fake build ppa only for go module dependencies
* mobile: fix CopyFile switch to package cp
* build, travis: use ephemeral debsrc GOPATH to get mod deps
* rpc: remove 'exported or builtin' restriction for parameters
There is no technial reason for this restriction because package reflect
can create values of any type. Requiring parameters and return values to
be exported causes a lot of noise in package exports.
* rpc: fix staticcheck warnings
This PR introduces clique_status which gives info about the health of
the clique network.
It's currently a bit PITA to find out how a clique network is
performing, and it can easily happen that sealers drop off -- and
everything is 'fine' until one more signer drops off, and the network
suddenly halts.
The new method provides the following stats:
- Which signers are currently active, and have signed blocks in the last
N (set to 64) blocks?
- How many blocks has each signer signed?
- What is the difficulty in the last N blocks, compared to the
theoretical maximum?
* core: s/isEIP155/isEIP2/ (fix)
This signature variable name reflects a spec'd change
in gas cost for creating contracts as documented in EIP2 (Homestead HF).
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-2.md#specification
* core: s/isEIP2/sIsHomestead/g
Use isHomestead since Homestead is what the caller
and rest of the code uses.
* build: use golangci-lint
This changes build/ci.go to download and run golangci-lint instead
of gometalinter.
* core/state: fix unnecessary conversion
* p2p/simulations: fix lock copying (found by go vet)
* signer/core: fix unnecessary conversions
* crypto/ecies: remove unused function cmpPublic
* core/rawdb: remove unused function print
* core/state: remove unused function xTestFuzzCutter
* core/vm: disable TestWriteExpectedValues in a different way
* core/forkid: remove unused function checksum
* les: remove unused type proofsData
* cmd/utils: remove unused functions prefixedNames, prefixFor
* crypto/bn256: run goimports
* p2p/nat: fix goimports lint issue
* cmd/clef: avoid using unkeyed struct fields
* les: cancel context in testRequest
* rlp: delete unreachable code
* core: gofmt
* internal/build: simplify DownloadFile for Go 1.11 compatibility
* build: remove go test --short flag
* .travis.yml: disable build cache
* whisper/whisperv6: fix ineffectual assignment in TestWhisperIdentityManagement
* .golangci.yml: enable goconst and ineffassign linters
* build: print message when there are no lint issues
* internal/build: refactor download a bit
* rpc: improve codec abstraction
rpc.ServerCodec is an opaque interface. There was only one way to get a
codec using existing APIs: rpc.NewJSONCodec. This change exports
newCodec (as NewFuncCodec) and NewJSONCodec (as NewCodec). It also makes
all codec methods non-public to avoid showing internals in godoc.
While here, remove codec options in tests because they are not
supported anymore.
* p2p/simulations: use github.com/gorilla/websocket
This package was the last remaining user of golang.org/x/net/websocket.
Migrating to the new library wasn't straightforward because it is no
longer possible to treat WebSocket connections as a net.Conn.
* vendor: delete golang.org/x/net/websocket
* rpc: fix godoc comments and run gofmt
This removes the dashboard project. The dashboard was an experimental
browser UI for geth which displayed metrics and chain information in
real time. We are removing it because it has marginal utility and nobody
on the team can maintain it.
Removing the dashboard removes a lot of dependency code and shaves
6 MB off the geth binary size.
This adds all dashboard changes from the last couple months.
We're about to remove the dashboard, but decided that we should
get all the recent work in first in case anyone wants to pick up this
project later on.
* cmd, dashboard, eth, p2p: send peer info to the dashboard
* dashboard: update npm packages, improve UI, rebase
* dashboard, p2p: remove println, change doc
* cmd, dashboard, eth, p2p: cleanup after review
* dashboard: send current block to the dashboard client
* travis: Enable ARM support
* Include fixes from 20039
* Add a trace to debug the invalid lookup issue
* Try increasing the timeout to see if the arm test passes
* Investigate the resolver issue
* Increase arm64 timeout for clique test
* increase timeout in tests for arm64
* Only test the failing tests
* Review feedback: don't export epsilon
* Remove investigation tricks+include fjl's feeback
* Revert the retry ahead of using the mock resolver
* Fix rebase errors
* build: bump PPAs to Go 1.13 (via longsleep), keep Trusty on 1.11
* travis, build, vendor: use own Go bundle for PPA builds
* travis, build, internal, vendor: smarter Go bundler, own untar
* build: updated ci-notes with new Go bundling, only make, don't test
* core/evm, contracts: avoid copying memory for input in calls + make ecrecover not modify input buffer
* core/vm: optimize mstore a bit
* core/vm: change Get -> GetCopy in vm memory access
* accounts/abi: fix various issues
The fixed issues include:
(1) If there is no return in a call function, unpack should
return nil error
(2) For some functions which have struct array as parameter,
it will also be detected and generate the struct definition
(3) For event, if it has non-indexed parameter, the parameter
name will also be assigned if empty. Also the internal struct
will be detected and generate struct defition if not exist.
(4) Fix annotation generation in event function
* accounts/abi: add new abi field internalType
* accounts: address comments and add tests
* accounts/abi: replace strings.ReplaceAll with strings.Replace
* core/asm: Fix encoding of pushed labels
EVM uses big-endian byte-order, so to pad a label value to 4 bytes,
zeros must be added to the front, not the end.
* core/asm: Fix PC calculations when a label is pushed
Incrementing PC by 5 is only correct if the label appears after a jump,
in which case there is an implicit push. When it appears after an explicit
push, PC should only be incremented by 4.
* core/asm: Allow JUMP with no argument
This way, a label can be pushed explicitly, or loaded from memory to
implement a jump table.
When we flush a batch of trie nodes into database during the state
sync, we should guarantee that all children should be flushed before
parent.
Actually the trie nodes commit order is strict by: children -> parent.
But when we flush all ready nodes into db, we don't need the order
anymore since
(1) they are all ready nodes (no more dependency)
(2) underlying database provides write atomicity
The gas price was not passed to the `EstimateGas` function. As a result,
conditional execution paths depending on `tx.gasprice` could be not
correctly processed and we could get invalid gas estimates for contract
function calls.
This PR adds a new unit test in miner package which will create some blocks from miner and then import into another chain. In this way, we can ensure all blocks generated by Geth miner obey consensus rules.
In Geth, we have two sources for configuration:
(1) Config file
(2) Command line flag
Basically geth will first resolve config file and then overwrite
configs with command line flags.
This issue is: geth should only overwrite configs if flags are truly
set. So before we apply any flag to configs, `GlobalIsSet` check
is necessary.
* update tests for istanbul
* tests: updated blockchaintests, see https://github.com/ethereum/tests/issues/637
* tests: update again, hopefully fixed this time
* tests: skip time consuming, run legacy tests
* tests: update again
* build: disable long-running tests on travis
* tests: fix formatting nits
* tests: I hate github's editor
This adds an implementation of node discovery via DNS TXT records to the
go-ethereum library. The implementation doesn't match EIP-1459 exactly,
the main difference being that this implementation uses separate merkle
trees for tree links and ENRs. The EIP will be updated to match p2p/dnsdisc.
To maintain DNS trees, cmd/devp2p provides a frontend for the p2p/dnsdisc
library. The new 'dns' subcommands can be used to create, sign and deploy DNS
discovery trees.
This change adds tests for the virtual clock and aligns the interface
with the time package by renaming Cancel to Stop. It also removes the
binary search from Stop because it complicates the code unnecessarily.
* rlp: improve nil pointer handling
In both encoder and decoder, the rules for encoding nil pointers were a
bit hard to understand, and didn't leave much choice. Since RLP allows
two empty values (empty list, empty string), any protocol built on RLP
must choose either of these values to represent the null value in a
certain context.
This change adds choice in the form of two new struct tags, "nilString"
and "nilList". These can be used to specify how a nil pointer value is
encoded. The "nil" tag still exists, but its implementation is now
explicit and defines exactly how nil pointers are handled in a single
place.
Another important change in this commit is how nil pointers and the
Encoder interface interact. The EncodeRLP method was previously called
even on nil values, which was supposed to give users a choice of how
their value would be handled when nil. It turns out this is a stupid
idea. If you create a network protocol containing an object defined in
another package, it's better to be able to say that the object should be
a list or string when nil in the definition of the protocol message
rather than defining the encoding of nil on the object itself.
As of this commit, the encoding rules for pointers now take precedence
over the Encoder interface rule. I think the "nil" tag will work fine
for most cases. For special kinds of objects which are a struct in Go
but strings in RLP, code using the object can specify the desired
encoding of nil using the "nilString" and "nilList" tags.
* rlp: propagate struct field type errors
If a struct contained fields of undecodable type, the encoder and
decoder would panic instead of returning an error. Fix this by
propagating type errors in makeStruct{Writer,Decoder} and add a test.
Most of these changes are related to the Go 1.13 changes to test binary
flag handling.
* cmd/geth: make attach tests more reliable
This makes the test wait for the endpoint to come up by polling
it instead of waiting for two seconds.
* tests: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* crypto/ecies: remove useless -dump flag in tests
* p2p/simulations: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* build: remove workaround for ./... vendor matching
This workaround was necessary for Go 1.8. The Go 1.9 release changed
the expansion rules to exclude vendored packages.
* Makefile: use relative path for GOBIN
This makes the "Run ./build/bin/..." line look nicer.
* les: fix test binary flags for Go 1.13
Calling flag.Parse during package initialization is prohibited
as of Go 1.13 and causes test failures. Call it in TestMain instead.
* Change chainId in genesis block to 8888 from 0
Change chainId in genesis block to 8888 from 0 per Moriteru in https://ethereum.stackexchange.com/a/28082/40230.
* Replace 8888 with “<arbitrary positive integer>”
Per PR review, replace Moriteru’s arbitrary positive integer 8888 with “<arbitrary positive integer>” in chainId field.
This change adds support for gzip encoding on HTTP responses.
Gzip encoding is used when the client sets the 'accept-encoding: gzip' header.
Original change by @brianosaurus, with fixes from @SjonHortensius.
This copies cli.printHelp but changes minwidth to 38. Custom flag
code is improved to print the default value using cli.FlagStringer like
all built-in flags do.
- Move the existing tests from memorydb into a generalized testsuite
that can be run by any ethdb backend implementation.
- Add several more test cases to clarify some non-obvious nuances when
implementing a custom ethdb backend, such as the behaviour of
NewIteratorWithPrefix vs NewIteratorWithStart.
- Add leveldb to the testsuite using in-memory storage for fast
execution.
The precompile at 0x09 wraps the BLAKE2b F compression function:
https://tools.ietf.org/html/rfc7693#section-3.2
The precompile requires 6 inputs tightly encoded, taking exactly 213
bytes, as explained below.
- `rounds` - the number of rounds - 32-bit unsigned big-endian word
- `h` - the state vector - 8 unsigned 64-bit little-endian words
- `m` - the message block vector - 16 unsigned 64-bit little-endian words
- `t_0, t_1` - offset counters - 2 unsigned 64-bit little-endian words
- `f` - the final block indicator flag - 8-bit word
[4 bytes for rounds][64 bytes for h][128 bytes for m][8 bytes for t_0]
[8 bytes for t_1][1 byte for f]
The boolean `f` parameter is considered as `true` if set to `1`.
The boolean `f` parameter is considered as `false` if set to `0`.
All other values yield an invalid encoding of `f` error.
The precompile should compute the F function as specified in the RFC
(https://tools.ietf.org/html/rfc7693#section-3.2) and return the updated
state vector `h` with unchanged encoding (little-endian).
See EIP-152 for details.
* Ref #19906 - replace passPHRASE with passWORD in any user interactions
this skips doccomments and variablenames to minimize impact. It does
however include a rename of the `ethkey` `changepassphrase` parameter
* console: fix JavaScript error capitalization
* graphql, internal/ethapi: extend eth_call
This PR offers the third option parameter for eth_call API.
Caller can specify a batch of contracts for overriding the
original account metadata(nonce, balance, code, state).
It has a few advantages:
* It's friendly for debugging
* It's can make on-chain contract lighter for getting rid of
state access functions
* core, internal: address comments
* accounts/mananger, internal/ethapi/api: Add new function AllAccounts on account manager to remove the duplication code on getting all wallets accounts
* Rename to Accounts
* Rename to AllAccounts
* params: add IsIstanbul to config + rules
IstanbulBlock, used to determine if the config IsIstanbul, is currently
left nil until an actual block is chosen.
* params, core/vm: implement EIP-1108
Old gas costs for elliptic curve operations are given the PreIstanbul
prefix, while current gas costs retain the unprefixed names. The actual
precompile implementations are the same, so they are factored out into
common functions that are called by the pre-Istanbul and current
precompile structs. Finally, an Istanbul precompile list is added that
references the new precompile structs, which in turn reference the new
gas costs.
* params: fix fork ordering, add missing chain compatibility check
* params, core/vm: deprecating gastable, part 1
* core/vm, params: deprecate gastable, use both constant and dynamic gas
* core/vm, params: remove gastable, remove copypaste
* core/vm: make use of the chainrules
* interpreter: make tracing count constant+dynamic gas
* core/vm: review concerns (param/method name changes)
* core/vm: make use of chainrules more
The abi package already supports function overload by adding a suffix to the overloaded function name, but it uses the function name with suffix to calculate signature(both for the event and method).
This PR fixes it by adding a new field named RawName, which can be used to calcuate all signatures but use Name to distinguish different overloaded function.
This change ensures 'blockHash', 'blockNumber' and 'transactionIndex'
are set to null for pending transactions. This behavior is required by
the Ethereum JSON-RPC spec.
* rpc: implement websockets with github.com/gorilla/websocket
This change makes package rpc use the github.com/gorilla/websocket
package for WebSockets instead of golang.org/x/net/websocket. The new
library is more robust and supports all WebSocket features including
continuation frames.
There are new tests for two issues with the previously-used library:
- TestWebsocketClientPing checks handling of Ping frames.
- TestWebsocketLargeCall checks whether the request size limit is
applied correctly.
* rpc: raise HTTP/WebSocket request size limit to 5MB
* rpc: remove default origin for client connections
The client used to put the local hostname into the Origin header because
the server wanted an origin to accept the connection, but that's silly:
Origin is for browsers/websites. The nobody would whitelist a particular
hostname.
Now that the server doesn't need Origin anymore, don't bother setting
one for clients. Users who need an origin can use DialWebsocket to
create a client with arbitrary origin if needed.
* vendor: put golang.org/x/net/websocket back
* rpc: don't set Origin header for empty (default) origin
* rpc: add HTTP status code to handshake error
This makes it easier to debug failing connections.
* ethstats: use github.com/gorilla/websocket
* rpc: fix lint
Gollvm has very aggressive dead code elimination that completely
removes one of these two benchmarks. To prevent this, use the
result of the benchmark (a boolean), and to be "fair", make the
transformation to both benchmarks.
To be reliably assured of not removing the code, "use" means
assigning to an exported global. Non-exported globals and
//go:noinline functions are possibly subject to this optimization.
* cmd/puppeth: integrate blockscout
* cmd/puppeth: expose debug namespace for blockscout
* cmd/puppeth: fix dbdir
* cmd/puppeth: run explorer in archive mode
* cmd/puppeth: ensure node is synced
* cmd/puppeth: fix explorer docker alignment + drop unneeded exec
* cmd/puppeth: polish up config saving and reloading
* cmd/puppeth: check both web and p2p port for explorer service
* eth: chain config (genesis + fork) ENR entry
* core/forkid, eth: protocol independent fork ID, update to CRC32 spec
* core/forkid, eth: make forkid a struct, next uint64, enr struct, RLP
* core/forkid: change forkhash rlp encoding from int to [4]byte
* eth: fixup eth entry a bit and update it every block
* eth: fix lint
* eth: fix crash in ethclient tests
This PR adds some hardening in the lower levels of the protocol stack, to bail early on invalid data. Primarily, attacks that this PR protects against are on the "annoyance"-level, which would otherwise write a couple of megabytes of data into the log output, which is a bit resource intensive.
* accounts, abigen: link dependent libs in deploy
* abigen: add java generation
* bind: Fix unit tests
* abigen: add unit test
* Fix CI
* Post-rebase fixes
* Fix rebase issue
* accounts/abi: Gary's review feedback
* accounts/abi: More Gary feedback
* accounts/abi: minor fixes
* accounts/abi, cmd/abigen: support tuple
accounts/abi/bind, cmd/abigen: add objc back
accounts/abi/bind: use byte[24] as function indicator
accounts/abi/bind: resolve struct slice or array
accounts/abi/bind: remove sort logic
accounts: fix issues in abi
* accounts/abi: address comment
This PR fixes an issue in chain indexer. Currently chain indexer will
validate whether the stored data is canonical by comparing section head
and canonical hash. But the header of the checkpoint may not exist in
the database. We should skip validation for sections below the
checkpoint.
* accounts/abi/bind: Accept function ptr parameter
They are translated as [24]byte
* Add Java template version
* accounts/abi/bind: fix merge issue
* Fix CI
* accounts/abi: Fix method overwritten by same name methods.
* accounts/abi: Fix method overwritten by same name methods.
* accounts/abi: avoid possible name conflict
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
* core/state, cmd/geth: streaming json output dump cmd + optional code+storage
* dump: add option to continue even if preimages are missing
* core, evm: lint nits
* cmd: use local flags for dump, omit empty code/storage
* core/state: fix state dump test
This function searches for an event+parameters in the ABI and returns it if found.
Co-authored-by: Victor Tran <vu.tran54@gmail.com>
Co-authored-by: Guillaume Ballet <gballet@gmail.com>
This PR updates a comment about the maximum client subscription buffer
to reflect changes made previously, and fixes a test that wouldn't fail
when wantError == true but execution did not return an error.
* core: move TxPool reorg and events to background goroutine
This change moves internal queue re-shuffling work in TxPool to a
background goroutine, TxPool.runReorg. Requests to execute runReorg are
accumulated by the new scheduleReorgLoop. The new loop also accumulates
transaction events.
The motivation for this change is making sends to txFeed synchronous
instead of sending them in one-off goroutines launched by 'add' and
'promoteExecutables'. If a downstream consumer of txFeed is blocked for
a while, reorg requests and events will queue up.
* core: remove homestead check in TxPool
This change removes tracking of the homestead block number from TxPool.
The homestead field was used to enforce minimum gas of 53000 for
contract creations after the homestead fork, but not before it. Since
nobody would want configure a non-homestead chain nowadays and contract
creations usually take more than 53000 gas, the extra correctness is
redundant and can be removed.
* core: fixes for review comments
* core: remove BenchmarkPoolInsert
This is useless now because there is no separate code path for
individual transactions anymore.
* core: fix pending counter metric
* core: fix pool tests
* core: dedup txpool announced events, discard stales
* core: reorg tx promotion/demotion to avoid weird pending gaps
When cancelling the context for a call on a HTTP-based client while the
call is running, the select in requestOp.wait may hit the <-context.Done()
case instead of the <-op.resp case. This doesn't happen often -- our
cancel test hasn't caught this even though it ran thousands of times
on CI since the RPC client was added.
Fixes#19714
* les: reject client connection if it makes too much invalid req
* les: address comments
* les: use uint32
* les: fix variable name
* les: add invalid counter for duplicate invalid req
The dialer limits itself to one attempt every 30s. Apply the same limit
in Server and reject peers which try to connect too eagerly. The check
against the limit happens right after accepting the connection.
Further changes in this commit ensure we pass the Server logger
down to Peer instances, discovery and dialState. Unit test logging now
works in all Server tests.
* vendor: remove unused dependencies
These were used by swarm code, which has now migrated to its own repository.
* travis.yml: remove sudo requirement for test builders
These needed sudo to run FUSE tests for swarm.
* p2p/enr: add entries for for IPv4/IPv6 separation
This adds entry types for "ip6", "udp6", "tcp6" keys. The IP type stays
around because removing it would break a lot of code and force everyone
to care about the distinction.
* p2p/enode: track IPv4 and IPv6 address separately
LocalNode predicts the local node's UDP endpoint and updates the record.
This change makes it predict IPv4 and IPv6 endpoints separately since
they can now be in the record at the same time.
* p2p/enode: implement base64 text format
* all: switch to enode.Parse(...)
This allows passing base64-encoded node records to all the places that
previously accepted enode:// URLs. The URL format is still supported.
* cmd/bootnode, p2p: log node URL instead of ENR
...and return the base64 record in NodeInfo.
* p2p/discover: export Ping and RequestENR
These two are useful for checking the status of a node.
* cmd/devp2p: add devp2p debug tool
This is a new tool for debugging p2p issues. It supports a few
basic tasks for now, but many more things can and will be added
in the near future.
devp2p enrdump -- prints ENRs readably
devp2p discv4 ping -- checks if a node is up
devp2p discv4 requestenr -- gets a node's record
devp2p discv4 resolve -- finds a node through the DHT
Github has started supporting SECURITY.md to contain a project's security policy. Adding this information to the repository makes it easier to determine how to disclosure a vulnerability as SECURITY.md becomes a standard.
The pgp fingerprint and key is taken from bounty.ethereum.org.
* Add retesteth command
* Remove label and insert full version
* mineBlock - break the inner loop when the block is full
* Fixes for touched non-reward accounts, gas limit issues
* Not fail when SendTx has transaction with incorrect RLP
* Fix linter (unnecessary conversion)
* retesteth: add usage string to flag
This should only be used in very rare cases e.g. if you are not 100% sure if something is a bug or asking a question that leads to improving the documentation. For general questions please use [discord](https://discord.gg/nthXNEv) or the Ethereum stack exchange at https://ethereum.stackexchange.com.
For prerequisites and detailed build instructions please read the [Installation Instructions](https://geth.ethereum.org/docs/install-and-build/installing-geth).
Building geth requires both a Go (version 1.10 or later) and a C compiler.
You can install them using your favourite package manager.
Once the dependencies are installed, run
Building `geth` requires both a Go (version 1.14 or later) and a C compiler. You can install
them using your favourite package manager. Once the dependencies are installed, run
make geth
```shell
make geth
```
or, to build the full suite of utilities:
make all
```shell
make all
```
## Executables
The go-ethereum project comes with several wrappers/executables found in the `cmd` directory.
The go-ethereum project comes with several wrappers/executables found in the `cmd`
directory.
| Command | Description |
|:----------:|-------------|
| **`geth`** | Our main Ethereum CLI client. It is the entry point into the Ethereum network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Ethereum network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. `geth --help` and the [CLI Wiki page](https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options) for command line options. |
| `abigen` | Source code generator to convert Ethereum contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain [Ethereum contract ABIs](https://github.com/ethereum/wiki/wiki/Ethereum-Contract-ABI) with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our [Native DApps](https://github.com/ethereum/go-ethereum/wiki/Native-DApps:-Go-bindings-to-Ethereum-contracts) wiki page for details. |
| `bootnode` | Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
| `evm` | Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. `evm --code 60ff60ff --debug`). |
| `gethrpctest` | Developer utility tool to support our [ethereum/rpc-test](https://github.com/ethereum/rpc-tests) test suite which validates baseline conformity to the [Ethereum JSON RPC](https://github.com/ethereum/wiki/wiki/JSON-RPC) specs. Please see the [test suite's readme](https://github.com/ethereum/rpc-tests/blob/master/README.md) for details. |
| `rlpdump` | Developer utility tool to convert binary RLP ([Recursive Length Prefix](https://github.com/ethereum/wiki/wiki/RLP)) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. `rlpdump --hex CE0183FFFFFFC4C304050583616263`). |
| `swarm`| Swarm daemon and tools. This is the entry point for the Swarm network. `swarm --help` for command line options and subcommands. See [Swarm README](https://github.com/ethereum/go-ethereum/tree/master/swarm) for more information. |
| `puppeth` | a CLI wizard that aids in creating a new Ethereum network. |
|**`geth`** | Our main Ethereum CLI client. It is the entry point into the Ethereum network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Ethereum network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. `geth --help` and the [CLI page](https://geth.ethereum.org/docs/interface/command-line-options) for command line options. |
| `clef` | Stand-alone signing tool, which can be used as a backend signer for `geth`. |
| `devp2p` | Utilities to interact with nodes on the networking layer, without running a full blockchain. |
| `abigen` | Source code generator to convert Ethereum contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain [Ethereum contract ABIs](https://docs.soliditylang.org/en/develop/abi-spec.html) with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our [Native DApps](https://geth.ethereum.org/docs/dapp/native-bindings) page for details. |
|`bootnode` | Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
| `evm` | Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. `evm --code 60ff60ff --debug run`). |
| `rlpdump` | Developer utility tool to convert binary RLP ([Recursive Length Prefix](https://eth.wiki/en/fundamentals/rlp)) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. `rlpdump --hex CE0183FFFFFFC4C304050583616263`). |
|`puppeth` | a CLI wizard that aids in creating a new Ethereum network. |
## Running geth
## Running `geth`
Going through all the possible command line flags is out of scope here (please consult our
[CLI Wiki page](https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options)), but we've
enumerated a few common parameter combos to get you up to speed quickly on how you can run your
own Geth instance.
[CLI Wiki page](https://geth.ethereum.org/docs/interface/command-line-options)),
but we've enumerated a few common parameter combos to get you up to speed quickly
on how you can run your own `geth` instance.
### Full node on the main Ethereum network
By far the most common scenario is people wanting to simply interact with the Ethereum network:
create accounts; transfer funds; deploy and interact with contracts. For this particular use-case
the user doesn't care about years-old historical data, so we can fast-sync quickly to the current
state of the network. To do so:
By far the most common scenario is people wanting to simply interact with the Ethereum
network: create accounts; transfer funds; deploy and interact with contracts. For this
particular use-case the user doesn't care about years-old historical data, so we can
fast-sync quickly to the current state of the network. To do so:
```
```shell
$ geth console
```
This command will:
* Start `geth` in snap sync mode (default, can be changed with the `--syncmode` flag),
causing it to download more data in exchange for avoiding processing the entire history
of the Ethereum network, which is very CPU intensive.
* Start up `geth`'s built-in interactive [JavaScript console](https://geth.ethereum.org/docs/interface/javascript-console),
(via the trailing `console` subcommand) through which you can interact using [`web3` methods](https://web3js.readthedocs.io/)
(note: the `web3` version bundled within `geth` is very old, and not up to date with official docs),
as well as `geth`'s own [management APIs](https://geth.ethereum.org/docs/rpc/server).
This tool is optional and if you leave it out you can always attach to an already running
`geth` instance with `geth attach`.
* Start geth in fast sync mode (default, can be changed with the `--syncmode` flag), causing it to
download more data in exchange for avoiding processing the entire history of the Ethereum network,
which is very CPU intensive.
* Start up Geth's built-in interactive [JavaScript console](https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console),
(via the trailing `console` subcommand) through which you can invoke all official [`web3` methods](https://github.com/ethereum/wiki/wiki/JavaScript-API)
as well as Geth's own [management APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs).
This tool is optional and if you leave it out you can always attach to an already running Geth instance
with `geth attach`.
### A Full node on the Görli test network
### A Full node on the Ethereum test network
Transitioning towards developers, if you'd like to play around with creating Ethereum
contracts, you almost certainly would like to do that without any real money involved until
you get the hang of the entire system. In other words, instead of attaching to the main
network, you want to join the **test** network with your node, which is fully equivalent to
the main network, but with play-Ether only.
Transitioning towards developers, if you'd like to play around with creating Ethereum contracts, you
almost certainly would like to do that without any real money involved until you get the hang of the
entire system. In other words, instead of attaching to the main network, you want to join the **test**
network with your node, which is fully equivalent to the main network, but with play-Ether only.
```
$ geth --testnet console
```shell
$ geth --goerli console
```
The `console` subcommand has the exact same meaning as above and they are equally useful on the
testnet too. Please see above for their explanations if you've skipped here.
The `console` subcommand has the exact same meaning as above and they are equally
useful on the testnet too. Please, see above for their explanations if you've skipped here.
Specifying the `--testnet` flag, however, will reconfigure your Geth instance a bit:
Specifying the `--goerli` flag, however, will reconfigure your `geth` instance a bit:
* Instead of using the default data directory (`~/.ethereum` on Linux for example), Geth will nest
itself one level deeper into a `testnet` subfolder (`~/.ethereum/testnet` on Linux). Note, on OSX
and Linux this also means that attaching to a running testnet node requires the use of a custom
endpoint since `geth attach` will try to attach to a production node endpoint by default. E.g.
`geth attach <datadir>/testnet/geth.ipc`. Windows users are not affected by this.
* Instead of connecting the main Ethereum network, the client will connect to the testnetwork,
which uses different P2P bootnodes, different network IDs and genesis states.
*Note: Although there are some internal protective measures to prevent transactions from crossing
over between the main network and test network, you should make sure to always use separate accounts
for play-money and real-money. Unless you manually move accounts, Geth will by default correctly
separate the two networks and will not make any accounts available between them.*
* Instead of connecting the main Ethereum network, the client will connect to the Görli
test network, which uses different P2P bootnodes, different network IDs and genesis
states.
* Instead of using the default data directory (`~/.ethereum` on Linux for example), `geth`
will nest itself one level deeper into a `goerli` subfolder (`~/.ethereum/goerli` on
Linux). Note, on OSX and Linux this also means that attaching to a running testnet node
requires the use of a custom endpoint since `geth attach` will try to attach to a
production node endpoint by default, e.g.,
`geth attach <datadir>/goerli/geth.ipc`. Windows users are not affected by
this.
*Note: Although there are some internal protective measures to prevent transactions from
crossing over between the main network and test network, you should make sure to always
use separate accounts for play-money and real-money. Unless you manually move
accounts, `geth` will by default correctly separate the two networks and will not make any
accounts available between them.*
### Full node on the Rinkeby test network
The above test network is a cross-client one based on the ethash proof-of-work consensus algorithm. As such, it has certain extra overhead and is more susceptible to reorganization attacks due to the network's low difficulty/security. Go Ethereum also supports connecting to a proof-of-authority based test network called [*Rinkeby*](https://www.rinkeby.io) (operated by members of the community). This network is lighter, more secure, but is only supported by go-ethereum.
Go Ethereum also supports connecting to the older proof-of-authority based test network
called [*Rinkeby*](https://www.rinkeby.io) which is operated by members of the community.
```
```shell
$ geth --rinkeby console
```
### Full node on the Ropsten test network
In addition to Görli and Rinkeby, Geth also supports the ancient Ropsten testnet. The
Ropsten test network is based on the Ethash proof-of-work consensus algorithm. As such,
it has certain extra overhead and is more susceptible to reorganization attacks due to the
network's low difficulty/security.
```shell
$ geth --ropsten console
```
*Note: Older Geth configurations store the Ropsten database in the `testnet` subdirectory.*
### Configuration
As an alternative to passing the numerous flags to the `geth` binary, you can also pass a configuration file via:
As an alternative to passing the numerous flags to the `geth` binary, you can also pass a
configuration file via:
```
```shell
$ geth --config /path/to/your_config.toml
```
To get an idea how the file should look like you can use the `dumpconfig` subcommand to export your existing configuration:
To get an idea how the file should look like you can use the `dumpconfig` subcommand to
export your existing configuration:
```
```shell
$ geth --your-favourite-flags dumpconfig
```
*Note: This works only with geth v1.6.0 and above.*
*Note: This works only with `geth` v1.6.0 and above.*
#### Docker quick start
One of the quickest ways to get Ethereum up and running on your machine is by using Docker:
One of the quickest ways to get Ethereum up and running on your machine is by using
Docker:
```
```shell
docker run -d --name ethereum-node -v /Users/alice/ethereum:/root \
-p 8545:8545 -p 30303:30303 \
ethereum/client-go
```
This will start geth in fast-sync mode with a DB memory allowance of 1GB just as the above command does. It will also create a persistent volume in your home directory for saving your blockchain as well as map the default ports. There is also an `alpine` tag available for a slim version of the image.
This will start `geth` in fast-sync mode with a DB memory allowance of 1GB just as the
above command does. It will also create a persistent volume in your home directory for
saving your blockchain as well as map the default ports. There is also an `alpine` tag
available for a slim version of the image.
Do not forget `--rpcaddr 0.0.0.0`, if you want to access RPC from other containers and/or hosts. By default, `geth` binds to the local interface and RPC endpoints is not accessible from the outside.
Do not forget `--http.addr 0.0.0.0`, if you want to access RPC from other containers
and/or hosts. By default, `geth` binds to the local interface and RPC endpoints is not
accessible from the outside.
### Programmatically interfacing Geth nodes
### Programmatically interfacing `geth` nodes
As a developer, sooner rather than later you'll want to start interacting with Geth and the Ethereum
network via your own programs and not manually through the console. To aid this, Geth has built-in
support for a JSON-RPC based APIs ([standard APIs](https://github.com/ethereum/wiki/wiki/JSON-RPC) and
[Geth specific APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs)). These can be
exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based platforms, and named pipes on Windows).
As a developer, sooner rather than later you'll want to start interacting with `geth` and the
Ethereum network via your own programs and not manually through the console. To aid
this, `geth` has built-in support for a JSON-RPC based APIs ([standard APIs](https://eth.wiki/json-rpc/API)
and [`geth` specific APIs](https://geth.ethereum.org/docs/rpc/server)).
These can be exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based
platforms, and named pipes on Windows).
The IPC interface is enabled by default and exposes all the APIs supported by Geth, whereas the HTTP
and WS interfaces need to manually be enabled and only expose a subset of APIs due to security reasons.
These can be turned on/off and configured as you'd expect.
The IPC interface is enabled by default and exposes all the APIs supported by `geth`,
whereas the HTTP and WS interfaces need to manually be enabled and only expose a
subset of APIs due to security reasons. These can be turned on/off and configured as
you'd expect.
HTTP based JSON-RPC API options:
*`--rpc` Enable the HTTP-RPC server
*`--rpcaddr` HTTP-RPC server listening interface (default: "localhost")
*`--rpcport` HTTP-RPC server listening port (default: 8545)
*`--rpcapi` API's offered over the HTTP-RPC interface (default: "eth,net,web3")
*`--rpccorsdomain` Comma separated list of domains from which to accept cross origin requests (browser enforced)
*`--http` Enable the HTTP-RPC server
*`--http.addr` HTTP-RPC server listening interface (default: `localhost`)
*`--http.port` HTTP-RPC server listening port (default: `8545`)
*`--http.api` API's offered over the HTTP-RPC interface (default: `eth,net,web3`)
*`--http.corsdomain` Comma separated list of domains from which to accept cross origin requests (browser enforced)
*`--ws` Enable the WS-RPC server
*`--wsaddr` WS-RPC server listening interface (default: "localhost")
*`--wsport` WS-RPC server listening port (default: 8546)
*`--wsapi` API's offered over the WS-RPC interface (default: "eth,net,web3")
*`--wsorigins` Origins from which to accept websockets requests
*`--ws.addr` WS-RPC server listening interface (default: `localhost`)
*`--ws.port` WS-RPC server listening port (default: `8546`)
*`--ws.api` API's offered over the WS-RPC interface (default: `eth,net,web3`)
*`--ws.origins` Origins from which to accept websockets requests
*`--ipcdisable` Disable the IPC-RPC server
*`--ipcapi` API's offered over the IPC-RPC interface (default: "admin,debug,eth,miner,net,personal,shh,txpool,web3")
*`--ipcapi` API's offered over the IPC-RPC interface (default: `admin,debug,eth,miner,net,personal,shh,txpool,web3`)
*`--ipcpath` Filename for IPC socket/pipe within the datadir (explicit paths escape it)
You'll need to use your own programming environments' capabilities (libraries, tools, etc) to connect
via HTTP, WS or IPC to a Geth node configured with the above flags and you'll need to speak [JSON-RPC](https://www.jsonrpc.org/specification)
on all transports. You can reuse the same connection for multiple requests!
You'll need to use your own programming environments' capabilities (libraries, tools, etc) to
connect via HTTP, WS or IPC to a `geth` node configured with the above flags and you'll
need to speak [JSON-RPC](https://www.jsonrpc.org/specification) on all transports. You
can reuse the same connection for multiple requests!
**Note: Please understand the security implications of opening up an HTTP/WS based transport before
doing so! Hackers on the internet are actively trying to subvert Ethereum nodes with exposed APIs!
Further, all browser tabs can access locally running web servers, so malicious web pages could try to
subvert locally available APIs!**
**Note: Please understand the security implications of opening up an HTTP/WS based
transport before doing so! Hackers on the internet are actively trying to subvert
Ethereum nodes with exposed APIs! Further, all browser tabs can access locally
running web servers, so malicious web pages could try to subvert locally available
APIs!**
### Operating a private network
Maintaining your own private network is more involved as a lot of configurations taken for granted in
the official networks need to be manually set up.
Maintaining your own private network is more involved as a lot of configurations taken for
granted in the official networks need to be manually set up.
#### Defining the private genesis state
First, you'll need to create the genesis state of your networks, which all nodes need to be aware of
and agree upon. This consists of a small JSON file (e.g. call it `genesis.json`):
First, you'll need to create the genesis state of your networks, which all nodes need to be
aware of and agree upon. This consists of a small JSON file (e.g. call it `genesis.json`):
Which will start mining blocks and transactions on a single CPU thread, crediting all proceedings to
the account specified by `--etherbase`. You can further tune the mining by changing the default gas
limit blocks converge to (`--targetgaslimit`) and the price transactions are accepted at (`--gasprice`).
Which will start mining blocks and transactions on a single CPU thread, crediting all
proceedings to the account specified by `--miner.etherbase`. You can further tune the mining
by changing the default gas limit blocks converge to (`--miner.targetgaslimit`) and the price
transactions are accepted at (`--miner.gasprice`).
## Contribution
Thank you for considering to help out with the source code! We welcome contributions from
anyone on the internet, and are grateful for even the smallest of fixes!
Thank you for considering to help out with the source code! We welcome contributions
from anyone on the internet, and are grateful for even the smallest of fixes!
If you'd like to contribute to go-ethereum, please fork, fix, commit and send a pull request
for the maintainers to review and merge into the main code base. If you wish to submit more
complex changes though, please check up with the core devs first on [our gitter channel](https://gitter.im/ethereum/go-ethereum)
to ensure those changes are in line with the general philosophy of the project and/or get some
early feedback which can make both your efforts much lighter as well as our review and merge
procedures quick and simple.
for the maintainers to review and merge into the main code base. If you wish to submit
more complex changes though, please check up with the core devs first on [our Discord Server](https://discord.gg/invite/nthXNEv)
to ensure those changes are in line with the general philosophy of the project and/or get
some early feedback which can make both your efforts much lighter as well as our review
and merge procedures quick and simple.
Please make sure your contributions adhere to our coding guidelines:
* Code must adhere to the official Go [formatting](https://golang.org/doc/effective_go.html#formatting) guidelines (i.e. uses [gofmt](https://golang.org/cmd/gofmt/)).
* Code must be documented adhering to the official Go [commentary](https://golang.org/doc/effective_go.html#commentary) guidelines.
* Code must adhere to the official Go [formatting](https://golang.org/doc/effective_go.html#formatting)
Please see [Releases](https://github.com/ethereum/go-ethereum/releases). We recommend using the [most recently released version](https://github.com/ethereum/go-ethereum/releases/latest).
## Audit reports
Audit reports are published in the `docs` folder: https://github.com/ethereum/go-ethereum/tree/master/docs/audits
**Please do not file a public ticket** mentioning the vulnerability.
To find out how to disclose a vulnerability in Ethereum visit [https://bounty.ethereum.org](https://bounty.ethereum.org) or email bounty@ethereum.org. Please read the [disclosure page](https://github.com/ethereum/go-ethereum/security/advisories?state=published) for more information about publically disclosed security vulnerabilities.
Use the built-in `geth version-check` feature to check whether the software is affected by any known vulnerability. This command will fetch the latest [`vulnerabilities.json`](https://geth.ethereum.org/docs/vulnerabilities/vulnerabilities.json) file which contains known security vulnerabilities concerning `geth`, and cross-check the data against its own version number.
The following key may be used to communicate sensitive information to developers.
// {{$contract.Type}}{{.Normalized.Name}}Iterator is returned from Filter{{.Normalized.Name}} and is used to iterate over the raw logs and unpacked data for {{.Normalized.Name}} events raised by the {{$contract.Type}} contract.
type {{$contract.Type}}{{.Normalized.Name}}Iterator struct {
@ -377,14 +491,14 @@ var (
// {{$contract.Type}}{{.Normalized.Name}} represents a {{.Normalized.Name}} event raised by the {{$contract.Type}} contract.
type {{$contract.Type}}{{.Normalized.Name}} struct {{{range.Normalized.Inputs}}
//lint:ignore ST1005 brand name displayed on the console
returncommon.Address{},nil,fmt.Errorf("Ledger v%d.%d.%d doesn't support signing this transaction, please update to v1.0.3 at least",w.version[0],w.version[1],w.version[2])
}
// All infos gathered and metadata checks out, request signing
returnw.ledgerSign(path,tx,chainID)
}
// SignTypedMessage implements usbwallet.driver, sending the message to the Ledger and
// waiting for the user to sign or deny the transaction.
//
// Note: this was introduced in the ledger 1.5.0 firmware
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
