Fix typos

Signed-off-by: Christian König <ckoenig@posteo.de>
Hand arguments to functions
2021-10-31 18:30:40 +01:00 · 2021-10-26 21:11:38 +02:00 · 2021-10-26 20:09:33 +02:00
54 changed files with 1954 additions and 2291 deletions
--- a/.github/release.yml
+++ b/.github/release.yml
@@ -1,7 +0,0 @@
-changelog:
-  exclude:
-    labels:
-      - internal
-    authors:
-      - dependabot
-      - github-actions
--- a/.github/workflows/stale.yml
+++ b/.github/workflows/stale.yml
@@ -1,25 +0,0 @@
-name: Mark stale issues
-
-on:
-  schedule:
-  - cron: '0 * * * *'
-  workflow_dispatch:
-
-jobs:
-  stale:
-
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-
-    steps:
-    - uses: actions/stale@v4
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        days-before-stale: 30
-        days-before-close: 5
-        stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Please comment or update this issue or it will be closed in 5 days.'
-        stale-issue-label: 'stale'
-        exempt-issue-labels: 'Internal, Fixed in next release, Bug: Confirmed, Documentation Needed'
-        exempt-all-issue-assignees: true
-        operations-per-run: 300
--- a/.github/workflows/sync-back-to-dev.yml
+++ b/.github/workflows/sync-back-to-dev.yml
@@ -1,27 +0,0 @@
-name: Sync Back to Development
-
-on:
-  push:
-    branches:
-      - master
-
-jobs:
-  sync-branches:
-    runs-on: ubuntu-latest
-    name: Syncing branches
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v2
-      - name: Opening pull request
-        id: pull
-        uses: tretuna/sync-branches@1.4.0
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          FROM_BRANCH: 'master'
-          TO_BRANCH: 'development'
-      - name: Label the pull request to ignore for release note generation
-        uses: actions-ecosystem/action-add-labels@v1
-        with:
-          labels: internal
-          repo: ${{ github.repository }}
-          number: ${{ steps.pull.outputs.PULL_REQUEST_NUMBER }}
--- a/.github/workflows/test.yml
+++ b/.github/workflows/test.yml
@@ -36,10 +36,10 @@ jobs:
      name: Checkout repository
      uses: actions/checkout@v2
    -
-      name: Set up Python 3.8
+      name: Set up Python 3.7
      uses: actions/setup-python@v2
      with:
-        python-version: 3.8
+        python-version: 3.7
    -
      name: Install dependencies
      run: pip install -r test/requirements.txt
--- a/.gitignore
+++ b/.gitignore
@@ -9,4 +9,3 @@ __pycache__
 *.egg-info
 .idea/
 *.iml
-.vscode/
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -2,6 +2,111 @@

 Please read and understand the contribution guide before creating an issue or pull request.

-The guide can be found here: [https://docs.pi-hole.net/guides/github/contributing/](https://docs.pi-hole.net/guides/github/contributing/)
+## Etiquette

+- Our goal for Pi-hole is **stability before features**. This means we focus on squashing critical bugs before adding new features. Often, we can do both in tandem, but bugs will take priority over a new feature.
+- Pi-hole is open source and [powered by donations](https://pi-hole.net/donate/), and as such, we give our **free time** to build, maintain, and **provide user support** for this project. It would be extremely unfair for us to suffer abuse or anger for our hard work, so please take a moment to consider that.
+- Please be considerate towards the developers and other users when raising issues or presenting pull requests.
+- Respect our decision(s), and do not be upset or abusive if your submission is not used.

+## Viability
+
+When requesting or submitting new features, first consider whether it might be useful to others. Open source projects are used by many people, who may have entirely different needs to your own. Think about whether or not your feature is likely to be used by other users of the project.
+
+## Procedure
+
+**Before filing an issue:**
+
+- Attempt to replicate and **document** the problem, to ensure that it wasn't a coincidental incident.
+- Check to make sure your feature suggestion isn't already present within the project.
+- Check the pull requests tab to ensure that the bug doesn't have a fix in progress.
+- Check the pull requests tab to ensure that the feature isn't already in progress.
+
+**Before submitting a pull request:**
+
+- Check the codebase to ensure that your feature doesn't already exist.
+- Check the pull requests to ensure that another person hasn't already submitted the feature or fix.
+- Read and understand the [DCO guidelines](https://docs.pi-hole.net/guides/github/contributing/) for the project.
+
+## Technical Requirements
+
+- Submit Pull Requests to the **development branch only**.
+- Before Submitting your Pull Request, merge `development` with your new branch and fix any conflicts. (Make sure you don't break anything in development!)
+- Please use the [Google Style Guide for Shell](https://google.github.io/styleguide/shell.xml) for your code submission styles.
+- Commit Unix line endings.
+- Please use the Pi-hole brand: **Pi-hole** (Take a special look at the capitalized 'P' and a low 'h' with a hyphen)
+- (Optional fun) keep to the theme of Star Trek/black holes/gravity.
+
+## Forking and Cloning from GitHub to GitHub
+
+1. Fork <https://github.com/pi-hole/pi-hole/> to a repo under a namespace you control, or have permission to use, for example: `https://github.com/<your_namespace>/<your_repo_name>/`. You can do this from the github.com website.
+2. Clone `https://github.com/<your_namespace>/<your_repo_name>/` with the tool of you choice.
+3. To keep your fork in sync with our repo, add an upstream remote for pi-hole/pi-hole to your repo.
+
+    ```bash
+    git remote add upstream https://github.com/pi-hole/pi-hole.git
+    ```
+
+4. Checkout the `development` branch from your fork `https://github.com/<your_namespace>/<your_repo_name>/`.
+5. Create a topic/branch, based on the `development` branch code. *Bonus fun to keep to the theme of Star Trek/black holes/gravity.*
+6. Make your changes and commit to your topic branch in your repo.
+7. Rebase your commits and squash any insignificant commits. See the notes below for an example.
+8. Merge `development` your branch and fix any conflicts.
+9. Open a Pull Request to merge your topic branch into our repo's `development` branch.
+
+- Keep in mind the technical requirements from above.
+
+## Forking and Cloning from GitHub to other code hosting sites
+
+- Forking is a GitHub concept and cannot be done from GitHub to other git-based code hosting sites. However, those sites may be able to mirror a GitHub repo.
+
+1. To contribute from another code hosting site, you must first complete the steps above to fork our repo to a GitHub namespace you have permission to use, for example: `https://github.com/<your_namespace>/<your_repo_name>/`.
+2. Create a repo in your code hosting site, for example: `https://gitlab.com/<your_namespace>/<your_repo_name>/`
+3. Follow the instructions from your code hosting site to create a mirror between `https://github.com/<your_namespace>/<your_repo_name>/` and `https://gitlab.com/<your_namespace>/<your_repo_name>/`.
+4. When you are ready to create a Pull Request (PR), follow the steps `(starting at step #6)` from [Forking and Cloning from GitHub to GitHub](#forking-and-cloning-from-github-to-github) and create the PR from `https://github.com/<your_namespace>/<your_repo_name>/`.
+
+## Notes for squashing commits with rebase
+
+- To rebase your commits and squash previous commits, you can use:
+
+    ```bash
+    git rebase -i your_topic_branch~(number of commits to combine)
+    ```
+
+- For more details visit [gitready.com](http://gitready.com/advanced/2009/02/10/squashing-commits-with-rebase.html)
+
+1. The following would combine the last four commits in the branch `mytopic`.
+
+    ```bash
+    git rebase -i mytopic~4
+    ```
+
+2. An editor window opens with the most recent commits indicated: (edit the commands to the left of the commit ID)
+
+    ```gitattributes
+    pick 9dff55b2 existing commit comments
+    squash ebb1a730 existing commit comments
+    squash 07cc5b50 existing commit comments
+    reword 9dff55b2 existing commit comments
+    ```
+
+3. Save and close the editor. The next editor window opens: (edit the new commit message). *If you select reword for a commit, an additional editor window will open for you to edit the comment.*
+
+    ```bash
+    new commit comments
+    Signed-off-by: yourname <your email address>
+    ```
+
+4. Save and close the editor for the rebase process to execute. The terminal output should say something like the following:
+
+    ```bash
+    Successfully rebased and updated refs/heads/mytopic.
+    ```
+
+5. Once you have a successful rebase, and before you sync your local clone, you have to force push origin to update your repo:
+
+    ```bash
+    git push -f origin
+    ```
+
+6. Continue on from step #7 from [Forking and Cloning from GitHub to GitHub](#forking-and-cloning-from-github-to-github)
--- a/advanced/06-rfc6761.conf
+++ b/advanced/06-rfc6761.conf
@@ -25,12 +25,11 @@ server=/localhost/
 server=/invalid/

 # The same RFC requests something similar for
-#     10.in-addr.arpa.      21.172.in-addr.arpa.  27.172.in-addr.arpa.
-#     16.172.in-addr.arpa.  22.172.in-addr.arpa.  28.172.in-addr.arpa.
-#     17.172.in-addr.arpa.  23.172.in-addr.arpa.  29.172.in-addr.arpa.
-#     18.172.in-addr.arpa.  24.172.in-addr.arpa.  30.172.in-addr.arpa.
-#     19.172.in-addr.arpa.  25.172.in-addr.arpa.  31.172.in-addr.arpa.
-#     20.172.in-addr.arpa.  26.172.in-addr.arpa.  168.192.in-addr.arpa.
+#     16.172.in-addr.arpa.  22.172.in-addr.arpa.  27.172.in-addr.arpa.
+#     17.172.in-addr.arpa.  30.172.in-addr.arpa.  28.172.in-addr.arpa.
+#     18.172.in-addr.arpa.  23.172.in-addr.arpa.  29.172.in-addr.arpa.
+#     19.172.in-addr.arpa.  24.172.in-addr.arpa.  31.172.in-addr.arpa.
+#     20.172.in-addr.arpa.  25.172.in-addr.arpa.  168.192.in-addr.arpa.
 # Pi-hole implements this via the dnsmasq option "bogus-priv" (see
 # 01-pihole.conf) because this also covers IPv6.

--- a/advanced/Scripts/chronometer.sh
+++ b/advanced/Scripts/chronometer.sh
@@ -329,8 +329,8 @@ get_sys_stats() {
                *) cpu_col="$COL_URG_RED";;
            esac

-            # $COL_NC$COL_DARK_GRAY is needed for $COL_URG_RED
-            cpu_temp_str=" @ $cpu_col$cpu_temp$COL_NC$COL_DARK_GRAY"
+        # $COL_NC$COL_DARK_GRAY is needed for $COL_URG_RED
+        cpu_temp_str=" @ $cpu_col$cpu_temp$COL_NC$COL_DARK_GRAY"

        elif [[ "$temp_unit" == "F" ]]; then
            cpu_temp=$(printf "%.0ff\\n" "$(calcFunc "($(< $temp_file) / 1000) * 9 / 5 + 32")")
@@ -357,7 +357,7 @@ get_sys_stats() {
    ram_used="${ram_raw[1]}"
    ram_total="${ram_raw[2]}"

-    if [[ "$(pihole status web 2> /dev/null)" -ge "1" ]]; then
+    if [[ "$(pihole status web 2> /dev/null)" == "1" ]]; then
        ph_status="${COL_LIGHT_GREEN}Active"
    else
        ph_status="${COL_LIGHT_RED}Offline"
@@ -445,7 +445,7 @@ get_strings() {
    lan_info="Gateway: $net_gateway"
    dhcp_info="$leased_str$ph_dhcp_num of $ph_dhcp_max"

-    ads_info="$total_str$ads_blocked_today of $dns_queries_today"
+      ads_info="$total_str$ads_blocked_today of $dns_queries_today"
    dns_info="$dns_count DNS servers"

    [[ "$recent_blocked" == "0" ]] && recent_blocked="${COL_LIGHT_RED}FTL offline${COL_NC}"
@@ -488,7 +488,7 @@ chronoFunc() {
            ${COL_LIGHT_RED}Press Ctrl-C to exit${COL_NC}
            ${COL_DARK_GRAY}$scr_line_str${COL_NC}"
        else
-            echo -e "[0;1;31;91m|¯[0;1;33;93m¯[0;1;32;92m¯[0;1;32;92m(¯[0;1;36;96m)[0;1;34;94m_[0;1;35;95m|[0;1;33;93m¯[0;1;31;91m|_  [0;1;32;92m__[0;1;36;96m_|[0;1;31;91m¯[0;1;34;94m|[0;1;35;95m__[0;1;31;91m_[0m$phc_ver_str\\n[0;1;33;93m| ¯[0;1;32;92m_[0;1;36;96m/¯[0;1;34;94m|[0;1;35;95m_[0;1;31;91m| [0;1;33;93m' [0;1;32;92m\\/ [0;1;36;96m_ [0;1;34;94m\\ [0;1;35;95m/ [0;1;31;91m-[0;1;33;93m_)[0m$lte_ver_str\\n[0;1;32;92m|_[0;1;36;96m| [0;1;34;94m|_[0;1;35;95m| [0;1;33;93m|_[0;1;32;92m||[0;1;36;96m_\\[0;1;34;94m__[0;1;35;95m_/[0;1;31;91m_\\[0;1;33;93m__[0;1;32;92m_|[0m$ftl_ver_str\\n ${COL_DARK_GRAY}$scr_line_str${COL_NC}"
+        echo -e "[0;1;31;91m|¯[0;1;33;93m¯[0;1;32;92m¯[0;1;32;92m(¯[0;1;36;96m)[0;1;34;94m_[0;1;35;95m|[0;1;33;93m¯[0;1;31;91m|_  [0;1;32;92m__[0;1;36;96m_|[0;1;31;91m¯[0;1;34;94m|[0;1;35;95m__[0;1;31;91m_[0m$phc_ver_str\\n[0;1;33;93m| ¯[0;1;32;92m_[0;1;36;96m/¯[0;1;34;94m|[0;1;35;95m_[0;1;31;91m| [0;1;33;93m' [0;1;32;92m\\/ [0;1;36;96m_ [0;1;34;94m\\ [0;1;35;95m/ [0;1;31;91m-[0;1;33;93m_)[0m$lte_ver_str\\n[0;1;32;92m|_[0;1;36;96m| [0;1;34;94m|_[0;1;35;95m| [0;1;33;93m|_[0;1;32;92m||[0;1;36;96m_\\[0;1;34;94m__[0;1;35;95m_/[0;1;31;91m_\\[0;1;33;93m__[0;1;32;92m_|[0m$ftl_ver_str\\n ${COL_DARK_GRAY}$scr_line_str${COL_NC}"
        fi

        printFunc "  Hostname: " "$sys_name" "$host_info"
--- a/advanced/Scripts/database_migration/gravity-db.sh
+++ b/advanced/Scripts/database_migration/gravity-db.sh
@@ -19,13 +19,13 @@ upgrade_gravityDB(){
 	auditFile="${piholeDir}/auditlog.list"

 	# Get database version
-	version="$(pihole-FTL sqlite3 "${database}" "SELECT \"value\" FROM \"info\" WHERE \"property\" = 'version';")"
+	version="$(sqlite3 "${database}" "SELECT \"value\" FROM \"info\" WHERE \"property\" = 'version';")"

 	if [[ "$version" == "1" ]]; then
 		# This migration script upgrades the gravity.db file by
 		# adding the domain_audit table
 		echo -e "  ${INFO} Upgrading gravity database from version 1 to 2"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/1_to_2.sql"
+		sqlite3 "${database}" < "${scriptPath}/1_to_2.sql"
 		version=2

 		# Store audit domains in database table
@@ -40,28 +40,28 @@ upgrade_gravityDB(){
 		# renaming the regex table to regex_blacklist, and
 		# creating a new regex_whitelist table + corresponding linking table and views
 		echo -e "  ${INFO} Upgrading gravity database from version 2 to 3"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/2_to_3.sql"
+		sqlite3 "${database}" < "${scriptPath}/2_to_3.sql"
 		version=3
 	fi
 	if [[ "$version" == "3" ]]; then
 		# This migration script unifies the formally separated domain
 		# lists into a single table with a UNIQUE domain constraint
 		echo -e "  ${INFO} Upgrading gravity database from version 3 to 4"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/3_to_4.sql"
+		sqlite3 "${database}" < "${scriptPath}/3_to_4.sql"
 		version=4
 	fi
 	if [[ "$version" == "4" ]]; then
 		# This migration script upgrades the gravity and list views
 		# implementing necessary changes for per-client blocking
 		echo -e "  ${INFO} Upgrading gravity database from version 4 to 5"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/4_to_5.sql"
+		sqlite3 "${database}" < "${scriptPath}/4_to_5.sql"
 		version=5
 	fi
 	if [[ "$version" == "5" ]]; then
 		# This migration script upgrades the adlist view
 		# to return an ID used in gravity.sh
 		echo -e "  ${INFO} Upgrading gravity database from version 5 to 6"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/5_to_6.sql"
+		sqlite3 "${database}" < "${scriptPath}/5_to_6.sql"
 		version=6
 	fi
 	if [[ "$version" == "6" ]]; then
@@ -69,7 +69,7 @@ upgrade_gravityDB(){
 		# which is automatically associated to all clients not
 		# having their own group assignments
 		echo -e "  ${INFO} Upgrading gravity database from version 6 to 7"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/6_to_7.sql"
+		sqlite3 "${database}" < "${scriptPath}/6_to_7.sql"
 		version=7
 	fi
 	if [[ "$version" == "7" ]]; then
@@ -77,21 +77,21 @@ upgrade_gravityDB(){
 		# to ensure uniqueness on the group name
 		# We also add date_added and date_modified columns
 		echo -e "  ${INFO} Upgrading gravity database from version 7 to 8"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/7_to_8.sql"
+		sqlite3 "${database}" < "${scriptPath}/7_to_8.sql"
 		version=8
 	fi
 	if [[ "$version" == "8" ]]; then
 		# This migration fixes some issues that were introduced
 		# in the previous migration script.
 		echo -e "  ${INFO} Upgrading gravity database from version 8 to 9"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/8_to_9.sql"
+		sqlite3 "${database}" < "${scriptPath}/8_to_9.sql"
 		version=9
 	fi
 	if [[ "$version" == "9" ]]; then
 		# This migration drops unused tables and creates triggers to remove
 		# obsolete groups assignments when the linked items are deleted
 		echo -e "  ${INFO} Upgrading gravity database from version 9 to 10"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/9_to_10.sql"
+		sqlite3 "${database}" < "${scriptPath}/9_to_10.sql"
 		version=10
 	fi
 	if [[ "$version" == "10" ]]; then
@@ -101,31 +101,31 @@ upgrade_gravityDB(){
 		# to keep the copying process generic (needs the same columns in both the
 		# source and the destination databases).
 		echo -e "  ${INFO} Upgrading gravity database from version 10 to 11"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/10_to_11.sql"
+		sqlite3 "${database}" < "${scriptPath}/10_to_11.sql"
 		version=11
 	fi
 	if [[ "$version" == "11" ]]; then
 		# Rename group 0 from "Unassociated" to "Default"
 		echo -e "  ${INFO} Upgrading gravity database from version 11 to 12"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/11_to_12.sql"
+		sqlite3 "${database}" < "${scriptPath}/11_to_12.sql"
 		version=12
 	fi
 	if [[ "$version" == "12" ]]; then
 		# Add column date_updated to adlist table
 		echo -e "  ${INFO} Upgrading gravity database from version 12 to 13"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/12_to_13.sql"
+		sqlite3 "${database}" < "${scriptPath}/12_to_13.sql"
 		version=13
 	fi
 	if [[ "$version" == "13" ]]; then
 		# Add columns number and status to adlist table
 		echo -e "  ${INFO} Upgrading gravity database from version 13 to 14"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/13_to_14.sql"
+		sqlite3 "${database}" < "${scriptPath}/13_to_14.sql"
 		version=14
 	fi
 	if [[ "$version" == "14" ]]; then
-		# Changes the vw_adlist created in 5_to_6
-		echo -e "  ${INFO} Upgrading gravity database from version 14 to 15"
-		pihole-FTL sqlite3 "${database}" < "${scriptPath}/14_to_15.sql"
-		version=15
-	fi
+	# Changes the vw_adlist created in 5_to_6
+	echo -e "  ${INFO} Upgrading gravity database from version 14 to 15"
+	sqlite3 "${database}" < "${scriptPath}/14_to_15.sql"
+	version=15
+fi
 }
--- a/advanced/Scripts/list.sh
+++ b/advanced/Scripts/list.sh
@@ -16,7 +16,7 @@ GRAVITYDB="${piholeDir}/gravity.db"
 # Source pihole-FTL from install script
 pihole_FTL="${piholeDir}/pihole-FTL.conf"
 if [[ -f "${pihole_FTL}" ]]; then
-    source "${pihole_FTL}"
+  source "${pihole_FTL}"
 fi

 # Set this only after sourcing pihole-FTL.conf as the gravity database path may
@@ -91,8 +91,7 @@ Options:
  -q, --quiet         Make output less verbose
  -h, --help          Show this help dialog
  -l, --list          Display all your ${listname}listed domains
-  --nuke              Removes all entries in a list
-  --comment \"text\"    Add a comment to the domain. If adding multiple domains the same comment will be used for all"
+  --nuke              Removes all entries in a list"

  exit 0
 }
@@ -134,7 +133,7 @@ ProcessDomainList() {
        else
            RemoveDomain "${dom}"
        fi
-    done
+  done
 }

 AddDomain() {
@@ -142,23 +141,23 @@ AddDomain() {
    domain="$1"

    # Is the domain in the list we want to add it to?
-    num="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM domainlist WHERE domain = '${domain}';")"
+    num="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM domainlist WHERE domain = '${domain}';")"
    requestedListname="$(GetListnameFromTypeId "${typeId}")"

    if [[ "${num}" -ne 0 ]]; then
-        existingTypeId="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT type FROM domainlist WHERE domain = '${domain}';")"
-        if [[ "${existingTypeId}" == "${typeId}" ]]; then
-            if [[ "${verbose}" == true ]]; then
-                echo -e "  ${INFO} ${1} already exists in ${requestedListname}, no need to add!"
-            fi
-        else
-            existingListname="$(GetListnameFromTypeId "${existingTypeId}")"
-            pihole-FTL sqlite3 "${gravityDBfile}" "UPDATE domainlist SET type = ${typeId} WHERE domain='${domain}';"
-            if [[ "${verbose}" == true ]]; then
-                echo -e "  ${INFO} ${1} already exists in ${existingListname}, it has been moved to ${requestedListname}!"
-            fi
+      existingTypeId="$(sqlite3 "${gravityDBfile}" "SELECT type FROM domainlist WHERE domain = '${domain}';")"
+      if [[ "${existingTypeId}" == "${typeId}" ]]; then
+        if [[ "${verbose}" == true ]]; then
+            echo -e "  ${INFO} ${1} already exists in ${requestedListname}, no need to add!"
        fi
-        return
+      else
+        existingListname="$(GetListnameFromTypeId "${existingTypeId}")"
+        sqlite3 "${gravityDBfile}" "UPDATE domainlist SET type = ${typeId} WHERE domain='${domain}';"
+        if [[ "${verbose}" == true ]]; then
+            echo -e "  ${INFO} ${1} already exists in ${existingListname}, it has been moved to ${requestedListname}!"
+        fi
+      fi
+      return
    fi

    # Domain not found in the table, add it!
@@ -169,10 +168,10 @@ AddDomain() {
    # Insert only the domain here. The enabled and date_added fields will be filled
    # with their default values (enabled = true, date_added = current timestamp)
    if [[ -z "${comment}" ]]; then
-        pihole-FTL sqlite3 "${gravityDBfile}" "INSERT INTO domainlist (domain,type) VALUES ('${domain}',${typeId});"
+        sqlite3 "${gravityDBfile}" "INSERT INTO domainlist (domain,type) VALUES ('${domain}',${typeId});"
    else
        # also add comment when variable has been set through the "--comment" option
-        pihole-FTL sqlite3 "${gravityDBfile}" "INSERT INTO domainlist (domain,type,comment) VALUES ('${domain}',${typeId},'${comment}');"
+        sqlite3 "${gravityDBfile}" "INSERT INTO domainlist (domain,type,comment) VALUES ('${domain}',${typeId},'${comment}');"
    fi
 }

@@ -181,15 +180,15 @@ RemoveDomain() {
    domain="$1"

    # Is the domain in the list we want to remove it from?
-    num="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM domainlist WHERE domain = '${domain}' AND type = ${typeId};")"
+    num="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM domainlist WHERE domain = '${domain}' AND type = ${typeId};")"

    requestedListname="$(GetListnameFromTypeId "${typeId}")"

    if [[ "${num}" -eq 0 ]]; then
-        if [[ "${verbose}" == true ]]; then
-            echo -e "  ${INFO} ${domain} does not exist in ${requestedListname}, no need to remove!"
-        fi
-        return
+      if [[ "${verbose}" == true ]]; then
+          echo -e "  ${INFO} ${domain} does not exist in ${requestedListname}, no need to remove!"
+      fi
+      return
    fi

    # Domain found in the table, remove it!
@@ -198,14 +197,14 @@ RemoveDomain() {
    fi
    reload=true
    # Remove it from the current list
-    pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM domainlist WHERE domain = '${domain}' AND type = ${typeId};"
+    sqlite3 "${gravityDBfile}" "DELETE FROM domainlist WHERE domain = '${domain}' AND type = ${typeId};"
 }

 Displaylist() {
    local count num_pipes domain enabled status nicedate requestedListname

    requestedListname="$(GetListnameFromTypeId "${typeId}")"
-    data="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT domain,enabled,date_modified FROM domainlist WHERE type = ${typeId};" 2> /dev/null)"
+    data="$(sqlite3 "${gravityDBfile}" "SELECT domain,enabled,date_modified FROM domainlist WHERE type = ${typeId};" 2> /dev/null)"

    if [[ -z $data ]]; then
        echo -e "Not showing empty list"
@@ -243,10 +242,10 @@ Displaylist() {
 }

 NukeList() {
-    count=$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(1) FROM domainlist WHERE type = ${typeId};")
+    count=$(sqlite3 "${gravityDBfile}" "SELECT COUNT(1) FROM domainlist WHERE type = ${typeId};")
    listname="$(GetListnameFromTypeId "${typeId}")"
    if [ "$count" -gt 0 ];then
-        pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM domainlist WHERE type = ${typeId};"
+        sqlite3 "${gravityDBfile}" "DELETE FROM domainlist WHERE type = ${typeId};"
        echo "  ${TICK} Removed ${count} domain(s) from the ${listname}"
    else
        echo "  ${INFO} ${listname} already empty. Nothing to do!"
@@ -257,8 +256,8 @@ NukeList() {
 GetComment() {
    comment="$1"
    if [[ "${comment}" =~ [^a-zA-Z0-9_\#:/\.,\ -] ]]; then
-        echo "  ${CROSS} Found invalid characters in domain comment!"
-        exit
+      echo "  ${CROSS} Found invalid characters in domain comment!"
+      exit
    fi
 }

@@ -293,7 +292,7 @@ ProcessDomainList

 # Used on web interface
 if $web; then
-    echo "DONE"
+echo "DONE"
 fi

 if [[ ${reload} == true && ${noReloadRequested} == false ]]; then
--- a/advanced/Scripts/piholeARPTable.sh
+++ b/advanced/Scripts/piholeARPTable.sh
@@ -39,7 +39,7 @@ flushARP(){
    # Truncate network_addresses table in pihole-FTL.db
    # This needs to be done before we can truncate the network table due to
    # foreign key constraints
-    if ! output=$(pihole-FTL sqlite3 "${DBFILE}" "DELETE FROM network_addresses" 2>&1); then
+    if ! output=$(sqlite3 "${DBFILE}" "DELETE FROM network_addresses" 2>&1); then
        echo -e "${OVER}  ${CROSS} Failed to truncate network_addresses table"
        echo "  Database location: ${DBFILE}"
        echo "  Output: ${output}"
@@ -47,7 +47,7 @@ flushARP(){
    fi

    # Truncate network table in pihole-FTL.db
-    if ! output=$(pihole-FTL sqlite3 "${DBFILE}" "DELETE FROM network" 2>&1); then
+    if ! output=$(sqlite3 "${DBFILE}" "DELETE FROM network" 2>&1); then
        echo -e "${OVER}  ${CROSS} Failed to truncate network table"
        echo "  Database location: ${DBFILE}"
        echo "  Output: ${output}"
--- a/advanced/Scripts/piholeDebug.sh
+++ b/advanced/Scripts/piholeDebug.sh
@@ -27,7 +27,7 @@ PIHOLE_COLTABLE_FILE="${PIHOLE_SCRIPTS_DIRECTORY}/COL_TABLE"

 # These provide the colors we need for making the log more readable
 if [[ -f ${PIHOLE_COLTABLE_FILE} ]]; then
-    source ${PIHOLE_COLTABLE_FILE}
+  source ${PIHOLE_COLTABLE_FILE}
 else
    COL_NC='\e[0m' # No Color
    COL_RED='\e[1;91m'
@@ -88,7 +88,6 @@ PIHOLE_LOCAL_HOSTS_FILE="${PIHOLE_DIRECTORY}/local.list"
 PIHOLE_LOGROTATE_FILE="${PIHOLE_DIRECTORY}/logrotate"
 PIHOLE_SETUP_VARS_FILE="${PIHOLE_DIRECTORY}/setupVars.conf"
 PIHOLE_FTL_CONF_FILE="${PIHOLE_DIRECTORY}/pihole-FTL.conf"
-PIHOLE_CUSTOM_HOSTS_FILE="${PIHOLE_DIRECTORY}/custom.list"

 # Read the value of an FTL config key. The value is printed to stdout.
 #
@@ -180,8 +179,7 @@ REQUIRED_FILES=("${PIHOLE_CRON_FILE}"
 "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}"
 "${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}"
 "${RESOLVCONF}"
-"${DNSMASQ_CONF}"
-"${PIHOLE_CUSTOM_HOSTS_FILE}")
+"${DNSMASQ_CONF}")

 DISCLAIMER="This process collects information from your Pi-hole, and optionally uploads it to a unique and random directory on tricorder.pi-hole.net.

@@ -467,9 +465,6 @@ diagnose_operating_system() {
    # Display the current test that is running
    echo_current_diagnostic "Operating system"

-    # If the PIHOLE_DOCKER_TAG variable is set, include this information in the debug output
-    [ -n "${PIHOLE_DOCKER_TAG}" ] && log_write "${INFO} Pi-hole Docker Container: ${PIHOLE_DOCKER_TAG}"
-
    # If there is a /etc/*release file, it's probably a supported operating system, so we can
    if ls /etc/*release 1> /dev/null 2>&1; then
        # display the attributes to the user from the function made earlier
@@ -733,11 +728,11 @@ compare_port_to_service_assigned() {

    # If the service is a Pi-hole service, highlight it in green
    if [[ "${service_name}" == "${expected_service}" ]]; then
-        log_write "${TICK} ${COL_GREEN}${port}${COL_NC} is in use by ${COL_GREEN}${service_name}${COL_NC}"
+        log_write "[${COL_GREEN}${port}${COL_NC}] is in use by ${COL_GREEN}${service_name}${COL_NC}"
    # Otherwise,
    else
        # Show the service name in red since it's non-standard
-        log_write "${CROSS} ${COL_RED}${port}${COL_NC} is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
+        log_write "[${COL_RED}${port}${COL_NC}] is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
    fi
 }

@@ -753,47 +748,36 @@ check_required_ports() {
    # Sort the addresses and remove duplicates
    while IFS= read -r line; do
        ports_in_use+=( "$line" )
-    done < <( ss --listening --numeric --tcp --udp --processes --no-header )
+    done < <( lsof -iTCP -sTCP:LISTEN -P -n +c 10 )

    # Now that we have the values stored,
    for i in "${!ports_in_use[@]}"; do
        # loop through them and assign some local variables
        local service_name
-        service_name=$(echo "${ports_in_use[$i]}" | awk '{gsub(/users:\(\("/,"",$7);gsub(/".*/,"",$7);print $7}')
+        service_name=$(echo "${ports_in_use[$i]}" | awk '{print $1}')
        local protocol_type
-        protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $1}')
+        protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $5}')
        local port_number
-        port_number="$(echo "${ports_in_use[$i]}" | awk '{print $5}')" #  | awk '{gsub(/^.*:/,"",$5);print $5}')
+        port_number="$(echo "${ports_in_use[$i]}" | awk '{print $9}')"

+        # Skip the line if it's the titles of the columns the lsof command produces
+        if [[ "${service_name}" == COMMAND ]]; then
+            continue
+        fi
        # Use a case statement to determine if the right services are using the right ports
-        case "$(echo "${port_number}" | rev | cut -d: -f1 | rev)" in
-            53) compare_port_to_service_assigned  "${resolver}" "${service_name}" "${protocol_type}:${port_number}"
+        case "$(echo "$port_number" | rev | cut -d: -f1 | rev)" in
+            53) compare_port_to_service_assigned  "${resolver}" "${service_name}" 53
                ;;
-            80) compare_port_to_service_assigned  "${web_server}" "${service_name}" "${protocol_type}:${port_number}"
+            80) compare_port_to_service_assigned  "${web_server}" "${service_name}" 80
                ;;
-            4711) compare_port_to_service_assigned  "${ftl}" "${service_name}" "${protocol_type}:${port_number}"
+            4711) compare_port_to_service_assigned  "${ftl}" "${service_name}" 4711
                ;;
            # If it's not a default port that Pi-hole needs, just print it out for the user to see
-            *) log_write "    ${protocol_type}:${port_number} is in use by ${service_name:=<unknown>}";
+            *) log_write "${port_number} ${service_name} (${protocol_type})";
        esac
    done
 }

-ip_command() {
-    # Obtain and log information from "ip XYZ show" commands
-    echo_current_diagnostic "${2}"
-    local entries=()
-    mapfile -t entries < <(ip "${1}" show)
-    for line in "${entries[@]}"; do
-        log_write "   ${line}"
-    done
-}
-
-check_ip_command() {
-    ip_command "addr" "Network interfaces and addresses"
-    ip_command "route" "Network routing table"
-}
-
 check_networking() {
    # Runs through several of the functions made earlier; we just clump them
    # together since they are all related to the networking aspect of things
@@ -802,9 +786,7 @@ check_networking() {
    detect_ip_addresses "6"
    ping_gateway "4"
    ping_gateway "6"
-    # Skip the following check if installed in docker container. Unpriv'ed containers do not have access to the information required
-    # to resolve the service name listening - and the container should not start if there was a port conflict anyway
-    [ -z "${PIHOLE_DOCKER_TAG}" ] && check_required_ports
+    check_required_ports
 }

 check_x_headers() {
@@ -888,7 +870,7 @@ dig_at() {
    # This helps emulate queries to different domains that a user might query
    # It will also give extra assurance that Pi-hole is correctly resolving and blocking domains
    local random_url
-    random_url=$(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity ORDER BY RANDOM() LIMIT 1")
+    random_url=$(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity ORDER BY RANDOM() LIMIT 1")

    # Next we need to check if Pi-hole can resolve a domain when the query is sent to it's IP address
    # This better emulates how clients will interact with Pi-hole as opposed to above where Pi-hole is
@@ -1202,7 +1184,7 @@ show_db_entries() {
    IFS=$'\r\n'
    local entries=()
    mapfile -t entries < <(\
-        pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" \
+        sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" \
            -cmd ".headers on" \
            -cmd ".mode column" \
            -cmd ".width ${widths}" \
@@ -1227,7 +1209,7 @@ show_FTL_db_entries() {
    IFS=$'\r\n'
    local entries=()
    mapfile -t entries < <(\
-        pihole-FTL sqlite3 "${PIHOLE_FTL_DB_FILE}" \
+        sqlite3 "${PIHOLE_FTL_DB_FILE}" \
            -cmd ".headers on" \
            -cmd ".mode column" \
            -cmd ".width ${widths}" \
@@ -1284,7 +1266,7 @@ analyze_gravity_list() {
    log_write "${COL_GREEN}${gravity_permissions}${COL_NC}"

    show_db_entries "Info table" "SELECT property,value FROM info" "20 40"
-    gravity_updated_raw="$(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT value FROM info where property = 'updated'")"
+    gravity_updated_raw="$(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT value FROM info where property = 'updated'")"
    gravity_updated="$(date -d @"${gravity_updated_raw}")"
    log_write "   Last gravity run finished at: ${COL_CYAN}${gravity_updated}${COL_NC}"
    log_write ""
@@ -1292,7 +1274,7 @@ analyze_gravity_list() {
    OLD_IFS="$IFS"
    IFS=$'\r\n'
    local gravity_sample=()
-    mapfile -t gravity_sample < <(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity LIMIT 10")
+    mapfile -t gravity_sample < <(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity LIMIT 10")
    log_write "   ${COL_CYAN}----- First 10 Gravity Domains -----${COL_NC}"

    for line in "${gravity_sample[@]}"; do
@@ -1402,9 +1384,9 @@ upload_to_tricorder() {
    log_write "${TICK} ${COL_GREEN}** FINISHED DEBUGGING! **${COL_NC}\\n"

    # Provide information on what they should do with their token
-    log_write "   * The debug log can be uploaded to tricorder.pi-hole.net for sharing with developers only."
+    log_write "    * The debug log can be uploaded to tricorder.pi-hole.net for sharing with developers only."

-    # If pihole -d is running automatically
+    # If pihole -d is running automatically (usually through the dashboard)
    if [[ "${AUTOMATED}" ]]; then
        # let the user know
        log_write "${INFO} Debug script running in automated mode"
@@ -1412,19 +1394,16 @@ upload_to_tricorder() {
        curl_to_tricorder
        # If we're not running in automated mode,
    else
-        # if not being called from the web interface
-        if [[ ! "${WEBCALL}" ]]; then
-            echo ""
-            # give the user a choice of uploading it or not
-            # Users can review the log file locally (or the output of the script since they are the same) and try to self-diagnose their problem
-            read -r -p "[?] Would you like to upload the log? [y/N] " response
-            case ${response} in
-                # If they say yes, run our function for uploading the log
-                [yY][eE][sS]|[yY]) curl_to_tricorder;;
-                # If they choose no, just exit out of the script
-                *) log_write "    * Log will ${COL_GREEN}NOT${COL_NC} be uploaded to tricorder.\\n    * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n";exit;
-            esac
-        fi
+        echo ""
+        # give the user a choice of uploading it or not
+        # Users can review the log file locally (or the output of the script since they are the same) and try to self-diagnose their problem
+        read -r -p "[?] Would you like to upload the log? [y/N] " response
+        case ${response} in
+            # If they say yes, run our function for uploading the log
+            [yY][eE][sS]|[yY]) curl_to_tricorder;;
+            # If they choose no, just exit out of the script
+            *) log_write "    * Log will ${COL_GREEN}NOT${COL_NC} be uploaded to tricorder.\\n    * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n";exit;
+        esac
    fi
    # Check if tricorder.pi-hole.net is reachable and provide token
    # along with some additional useful information
@@ -1444,13 +1423,8 @@ upload_to_tricorder() {
    # If no token was generated
    else
        # Show an error and some help instructions
-        # Skip this if being called from web interface and autmatic mode was not chosen (users opt-out to upload)
-        if [[ "${WEBCALL}" ]] && [[ ! "${AUTOMATED}" ]]; then
-            :
-        else
-            log_write "${CROSS}  ${COL_RED}There was an error uploading your debug log.${COL_NC}"
-            log_write "   * Please try again or contact the Pi-hole team for assistance."
-        fi
+        log_write "${CROSS}  ${COL_RED}There was an error uploading your debug log.${COL_NC}"
+        log_write "   * Please try again or contact the Pi-hole team for assistance."
    fi
    # Finally, show where the log file is no matter the outcome of the function so users can look at it
    log_write "   * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n"
@@ -1469,7 +1443,6 @@ check_selinux
 check_firewalld
 processor_check
 disk_usage
-check_ip_command
 check_networking
 check_name_resolution
 check_dhcp_servers
--- a/advanced/Scripts/piholeLogFlush.sh
+++ b/advanced/Scripts/piholeLogFlush.sh
@@ -63,7 +63,7 @@ else
        fi
    fi
    # Delete most recent 24 hours from FTL's database, leave even older data intact (don't wipe out all history)
-    deleted=$(pihole-FTL sqlite3 "${DBFILE}" "DELETE FROM queries WHERE timestamp >= strftime('%s','now')-86400; select changes() from queries limit 1")
+    deleted=$(sqlite3 "${DBFILE}" "DELETE FROM queries WHERE timestamp >= strftime('%s','now')-86400; select changes() from queries limit 1")

    # Restart pihole-FTL to force reloading history
    sudo pihole restartdns
--- a/advanced/Scripts/query.sh
+++ b/advanced/Scripts/query.sh
@@ -21,7 +21,7 @@ matchType="match"
 # Source pihole-FTL from install script
 pihole_FTL="${piholeDir}/pihole-FTL.conf"
 if [[ -f "${pihole_FTL}" ]]; then
-    source "${pihole_FTL}"
+  source "${pihole_FTL}"
 fi

 # Set this only after sourcing pihole-FTL.conf as the gravity database path may
@@ -48,7 +48,7 @@ scanList(){
        # Iterate through each regexp and check whether it matches the domainQuery
        # If it does, print the matching regexp and continue looping
        # Input 1 - regexps | Input 2 - domainQuery
-        "regex" )
+        "regex" ) 
            for list in ${lists}; do
                if [[ "${domain}" =~ ${list} ]]; then
                    printf "%b\n" "${list}";
@@ -109,27 +109,27 @@ scanDatabaseTable() {
    # behavior. The "ESCAPE '\'" clause specifies that an underscore preceded by an '\' should be matched
    # as a literal underscore character. We pretreat the $domain variable accordingly to escape underscores.
    if [[ "${table}" == "gravity" ]]; then
-        case "${exact}" in
-            "exact" ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain = '${domain}'";;
-            *       ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
-        esac
+      case "${exact}" in
+          "exact" ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain = '${domain}'";;
+          *       ) querystr="SELECT gravity.domain,adlist.address,adlist.enabled FROM gravity LEFT JOIN adlist ON adlist.id = gravity.adlist_id WHERE domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
+      esac
    else
-        case "${exact}" in
-            "exact" ) querystr="SELECT domain,enabled FROM domainlist WHERE type = '${type}' AND domain = '${domain}'";;
-            *       ) querystr="SELECT domain,enabled FROM domainlist WHERE type = '${type}' AND domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
-        esac
+      case "${exact}" in
+          "exact" ) querystr="SELECT domain,enabled FROM domainlist WHERE type = '${type}' AND domain = '${domain}'";;
+          *       ) querystr="SELECT domain,enabled FROM domainlist WHERE type = '${type}' AND domain LIKE '%${domain//_/\\_}%' ESCAPE '\\'";;
+      esac
    fi

    # Send prepared query to gravity database
-    result="$(pihole-FTL sqlite3 "${gravityDBfile}" "${querystr}")" 2> /dev/null
+    result="$(sqlite3 "${gravityDBfile}" "${querystr}")" 2> /dev/null
    if [[ -z "${result}" ]]; then
        # Return early when there are no matches in this table
        return
    fi

    if [[ "${table}" == "gravity" ]]; then
-        echo "${result}"
-        return
+      echo "${result}"
+      return
    fi

    # Mark domain as having been white-/blacklist matched (global variable)
@@ -164,7 +164,7 @@ scanRegexDatabaseTable() {
    type="${3:-}"

    # Query all regex from the corresponding database tables
-    mapfile -t regexList < <(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT domain FROM domainlist WHERE type = ${type}" 2> /dev/null)
+    mapfile -t regexList < <(sqlite3 "${gravityDBfile}" "SELECT domain FROM domainlist WHERE type = ${type}" 2> /dev/null)

    # If we have regexps to process
    if [[ "${#regexList[@]}" -ne 0 ]]; then
@@ -233,15 +233,15 @@ for result in "${results[@]}"; do
    adlistAddress="${extra/|*/}"
    extra="${extra#*|}"
    if [[ "${extra}" == "0" ]]; then
-        extra=" (disabled)"
+      extra="(disabled)"
    else
-        extra=""
+      extra=""
    fi

    if [[ -n "${blockpage}" ]]; then
        echo "0 ${adlistAddress}"
    elif [[ -n "${exact}" ]]; then
-        echo "  - ${adlistAddress}${extra}"
+        echo "  - ${adlistAddress} ${extra}"
    else
        if [[ ! "${adlistAddress}" == "${adlistAddress_prev:-}" ]]; then
            count=""
@@ -256,7 +256,7 @@ for result in "${results[@]}"; do
            [[ "${count}" -gt "${max_count}" ]] && continue
            echo "   ${COL_GRAY}Over ${count} results found, skipping rest of file${COL_NC}"
        else
-            echo "   ${match}${extra}"
+            echo "   ${match} ${extra}"
        fi
    fi
 done
--- a/advanced/Scripts/update.sh
+++ b/advanced/Scripts/update.sh
@@ -35,7 +35,6 @@ source "/opt/pihole/COL_TABLE"

 GitCheckUpdateAvail() {
    local directory
-    local curBranch
    directory="${1}"
    curdir=$PWD
    cd "${directory}" || return
@@ -43,29 +42,18 @@ GitCheckUpdateAvail() {
    # Fetch latest changes in this repo
    git fetch --quiet origin

-    # Check current branch. If it is master, then check for the latest available tag instead of latest commit.
-    curBranch=$(git rev-parse --abbrev-ref HEAD)
-    if [[ "${curBranch}" == "master" ]]; then
-        # get the latest local tag
-        LOCAL=$(git describe --abbrev=0 --tags master)
-        # get the latest tag from remote
-        REMOTE=$(git describe --abbrev=0 --tags origin/master)
-
-    else
-        # @ alone is a shortcut for HEAD. Older versions of git
-        # need @{0}
-        LOCAL="$(git rev-parse "@{0}")"
-
-        # The suffix @{upstream} to a branchname
-        # (short form <branchname>@{u}) refers
-        # to the branch that the branch specified
-        # by branchname is set to build on top of#
-        # (configured with branch.<name>.remote and
-        # branch.<name>.merge). A missing branchname
-        # defaults to the current one.
-        REMOTE="$(git rev-parse "@{upstream}")"
-    fi
+    # @ alone is a shortcut for HEAD. Older versions of git
+    # need @{0}
+    LOCAL="$(git rev-parse "@{0}")"

+    # The suffix @{upstream} to a branchname
+    # (short form <branchname>@{u}) refers
+    # to the branch that the branch specified
+    # by branchname is set to build on top of#
+    # (configured with branch.<name>.remote and
+    # branch.<name>.merge). A missing branchname
+    # defaults to the current one.
+    REMOTE="$(git rev-parse "@{upstream}")"

    if [[ "${#LOCAL}" == 0 ]]; then
        echo -e "\\n  ${COL_LIGHT_RED}Error: Local revision could not be obtained, please contact Pi-hole Support"
@@ -212,7 +200,7 @@ main() {

    if [[ "${FTL_update}" == true || "${core_update}" == true ]]; then
        ${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || \
-            echo -e "${basicError}" && exit 1
+        echo -e "${basicError}" && exit 1
    fi

    if [[ "${FTL_update}" == true || "${core_update}" == true || "${web_update}" == true ]]; then
--- a/advanced/Scripts/utils.sh
+++ b/advanced/Scripts/utils.sh
@@ -1,35 +0,0 @@
-#!/usr/bin/env bash
-# Pi-hole: A black hole for Internet advertisements
-# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
-# Network-wide ad blocking via your own hardware.
-#
-# Script to hold utility functions for use in other scripts
-#
-# This file is copyright under the latest version of the EUPL.
-# Please see LICENSE file for your rights under this license.
-
-# Basic Housekeeping rules
-#  - Functions must be self contained
-#  - Functions must be added in alphabetical order
-#  - Functions must be documented
-#  - New functions must have a test added for them in test/test_any_utils.py
-
-#######################
-# Takes three arguments key, value, and file.
-# Checks the target file for the existence of the key
-#   - If it exists, it changes the value
-#   - If it does not exist, it adds the value
-#
-# Example usage:
-# addOrEditKeyValuePair "BLOCKING_ENABLED" "true" "/etc/pihole/setupVars.conf"
-#######################
-addOrEditKeyValPair() {
-  local key="${1}"
-  local value="${2}"
-  local file="${3}"
-  if grep -q "^${key}=" "${file}"; then
-    sed -i "/^${key}=/c\\${key}=${value}" "${file}"
-  else
-    echo "${key}=${value}" >> "${file}"
-  fi
-}
--- a/advanced/Scripts/version.sh
+++ b/advanced/Scripts/version.sh
@@ -13,10 +13,6 @@ DEFAULT="-1"
 COREGITDIR="/etc/.pihole/"
 WEBGITDIR="/var/www/html/admin/"

-# Source the setupvars config file
-# shellcheck disable=SC1091
-source /etc/pihole/setupVars.conf
-
 getLocalVersion() {
    # FTL requires a different method
    if [[ "$1" == "FTL" ]]; then
@@ -95,11 +91,10 @@ getRemoteVersion(){
    #If the above file exists, then we can read from that. Prevents overuse of GitHub API
    if [[ -f "$cachedVersions" ]]; then
        IFS=' ' read -r -a arrCache < "$cachedVersions"
-
        case $daemon in
-            "pi-hole"   )  echo "${arrCache[0]}";;
-            "AdminLTE"  )  [[ "${INSTALL_WEB_INTERFACE}" == true ]] && echo "${arrCache[1]}";;
-            "FTL"       )  [[ "${INSTALL_WEB_INTERFACE}" == true ]] && echo "${arrCache[2]}" || echo "${arrCache[1]}";;
+          "pi-hole"   )  echo "${arrCache[0]}";;
+          "AdminLTE"  )  echo "${arrCache[1]}";;
+          "FTL"       )  echo "${arrCache[2]}";;
        esac

        return 0
@@ -122,7 +117,7 @@ getLocalBranch(){
    local directory="${1}"
    local branch

-    # Local FTL btranch is stored in /etc/pihole/ftlbranch
+     # Local FTL btranch is stored in /etc/pihole/ftlbranch
    if [[ "$1" == "FTL" ]]; then
        branch="$(pihole-FTL branch)"
    else
@@ -145,11 +140,6 @@ getLocalBranch(){
 }

 versionOutput() {
-    if [[ "$1" == "AdminLTE" && "${INSTALL_WEB_INTERFACE}" != true ]]; then
-        echo "  WebAdmin not installed"
-        return 1
-    fi
-
    [[ "$1" == "pi-hole" ]] && GITDIR=$COREGITDIR
    [[ "$1" == "AdminLTE" ]] && GITDIR=$WEBGITDIR
    [[ "$1" == "FTL" ]] && GITDIR="FTL"
@@ -176,7 +166,6 @@ versionOutput() {
        output="Latest ${1^} hash is $latHash"
    else
        errorOutput
-        return 1
    fi

    [[ -n "$output" ]] && echo "  $output"
@@ -188,6 +177,10 @@ errorOutput() {
 }

 defaultOutput() {
+    # Source the setupvars config file
+    # shellcheck disable=SC1091
+    source /etc/pihole/setupVars.conf
+
    versionOutput "pi-hole" "$@"

    if [[ "${INSTALL_WEB_INTERFACE}" == true ]]; then
--- a/advanced/Scripts/webpage.sh
+++ b/advanced/Scripts/webpage.sh
@@ -34,19 +34,43 @@ fi
 helpFunc() {
    echo "Usage: pihole -a [options]
 Example: pihole -a -p password
-Set options for the Admin Console
+Set options for the Admin Web Console
+Add '-h' after specific commands for more information on usage

 Options:
-  -p, password                    Set Admin Console password
-  -c, celsius                     Set Celsius as preferred temperature unit
-  -f, fahrenheit                  Set Fahrenheit as preferred temperature unit
-  -k, kelvin                      Set Kelvin as preferred temperature unit
-  -e, email                       Set an administrative contact address for the Block Page
-  -h, --help                      Show this help dialog
-  -i, interface                   Specify dnsmasq's interface listening behavior
-  -l, privacylevel                Set privacy level (0 = lowest, 3 = highest)
-  -t, teleporter                  Backup configuration as an archive
-  -t, teleporter myname.tar.gz    Backup configuration to archive with name myname.tar.gz as specified"
+  -p, password        Set Admin Console password
+  -c, celsius         Set Celsius as preferred temperature unit
+  -f, fahrenheit      Set Fahrenheit as preferred temperature unit
+  -k, kelvin          Set Kelvin as preferred temperature unit
+  -e, email           Set an administrative contact address for the Block Page. Use -h for help
+  -h, --help          Show this help dialog
+  -i, interface       Specify dnsmasq's interface listening behavior. Use -h for help
+  -l, privacylevel    Set privacy level (0 = lowest, 3 = highest)
+  -t, teleporter      Backup configuration as an archive
+  poweroff            Poweroff the system
+  reboot              Reboot the system
+  restartdns          Restarts Pi-hole
+  layout              Set the web GUI layout [boxed/traditional]
+  theme               Set the web GUI theme [default-light/default-dark/default-darker/default-auto]
+  adlist              Manipulate adlists. Use -h for help
+  audit               Adds a domain to the audit log. Seperate doamins by comma
+  clearaudit          Remove all domains from the audit log.
+  addcustomdns        Adds an entry to the Local DNS Records. Use -h for help
+  removecustomdns     Removes an entry from the Local DNS Records. Use -h for help
+  addcustomcname      Adds a local CNAME. Use -h for help
+  removecustomcname   Removes a local CNAME. Use -h for help
+  enabledhcp          Enable the DHCP server. Use -h for help
+  disabledhcp         Disable the DHCP server
+  addstaticdhcp       Adds a static DHCP lease. Use -h for help
+  removestaticdhcp    Removes a static DHCP lease defind by [MAC]
+  setdns              Set Pihole's upstream DNS server. Comma-seperate
+                      individual server, use # to add specific port
+  setexcludedomains   Set domains to exclude from the web GUI dashboard's Top Domains.
+                      Comma-seperate individual domains
+  setexcludeclients   Set clients to exclude from the web GUI dashboard's Top Clients.
+                      Comma-seperate individual clients
+  setquerylog         Set which queries should be shown in the query log. Use -h for help"
+
    exit 0
 }

@@ -123,14 +147,14 @@ SetWebPassword() {
        read -s -r -p "Enter New Password (Blank for no password): " PASSWORD
        echo ""

-        if [ "${PASSWORD}" == "" ]; then
-            change_setting "WEBPASSWORD" ""
-            echo -e "  ${TICK} Password Removed"
-            exit 0
-        fi
+    if [ "${PASSWORD}" == "" ]; then
+        change_setting "WEBPASSWORD" ""
+        echo -e "  ${TICK} Password Removed"
+        exit 0
+    fi

-        read -s -r -p "Confirm Password: " CONFIRM
-        echo ""
+    read -s -r -p "Confirm Password: " CONFIRM
+    echo ""
    fi

    if [ "${PASSWORD}" == "${CONFIRM}" ] ; then
@@ -200,8 +224,6 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
    # Setup interface listening behavior of dnsmasq
    delete_dnsmasq_setting "interface"
    delete_dnsmasq_setting "local-service"
-    delete_dnsmasq_setting "except-interface"
-    delete_dnsmasq_setting "bind-interfaces"

    if [[ "${DNSMASQ_LISTENING}" == "all" ]]; then
        # Listen on all interfaces, permit all origins
@@ -210,7 +232,6 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
        # Listen only on all interfaces, but only local subnets
        add_dnsmasq_setting "local-service"
    else
-        # Options "bind" and "single"
        # Listen only on one interface
        # Use eth0 as fallback interface if interface is missing in setupVars.conf
        if [ -z "${PIHOLE_INTERFACE}" ]; then
@@ -218,11 +239,6 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
        fi

        add_dnsmasq_setting "interface" "${PIHOLE_INTERFACE}"
-
-        if [[ "${DNSMASQ_LISTENING}" == "bind" ]]; then
-            # Really bind to interface
-            add_dnsmasq_setting "bind-interfaces"
-        fi
    fi

    if [[ "${CONDITIONAL_FORWARDING}" == true ]]; then
@@ -256,8 +272,8 @@ trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC68345710423
                3   )   REV_SERVER_CIDR="${arrRev[0]}.0.0.0/8";;
            esac
        else
-            # Set REV_SERVER_CIDR to whatever value it was set to
-            REV_SERVER_CIDR="${CONDITIONAL_FORWARDING_REVERSE}"
+          # Set REV_SERVER_CIDR to whatever value it was set to
+          REV_SERVER_CIDR="${CONDITIONAL_FORWARDING_REVERSE}"
        fi

        # If REV_SERVER_CIDR is not converted by the above, then use the REV_SERVER_TARGET variable to derive it
@@ -373,6 +389,15 @@ RestartDNS() {
 }

 SetQueryLogOptions() {
+
+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a setquerylog [Value]
+        Set which queries should be shown in the query log.
+        Values are [all/permittedonly/blockedonly/nothing]
+        "
+
+        exit 0
+  fi
    change_setting "API_QUERY_LOG_SHOW" "${args[2]}"
 }

@@ -380,34 +405,34 @@ ProcessDHCPSettings() {
    source "${setupVars}"

    if [[ "${DHCP_ACTIVE}" == "true" ]]; then
-        interface="${PIHOLE_INTERFACE}"
+    interface="${PIHOLE_INTERFACE}"

-        # Use eth0 as fallback interface
-        if [ -z ${interface} ]; then
-            interface="eth0"
-        fi
+    # Use eth0 as fallback interface
+    if [ -z ${interface} ]; then
+        interface="eth0"
+    fi

-        if [[ "${PIHOLE_DOMAIN}" == "" ]]; then
-            PIHOLE_DOMAIN="lan"
-            change_setting "PIHOLE_DOMAIN" "${PIHOLE_DOMAIN}"
-        fi
+    if [[ "${PIHOLE_DOMAIN}" == "" ]]; then
+        PIHOLE_DOMAIN="lan"
+        change_setting "PIHOLE_DOMAIN" "${PIHOLE_DOMAIN}"
+    fi

-        if [[ "${DHCP_LEASETIME}" == "0" ]]; then
-            leasetime="infinite"
-        elif [[ "${DHCP_LEASETIME}" == "" ]]; then
-            leasetime="24"
-            change_setting "DHCP_LEASETIME" "${leasetime}"
-        elif [[ "${DHCP_LEASETIME}" == "24h" ]]; then
-            #Installation is affected by known bug, introduced in a previous version.
-            #This will automatically clean up setupVars.conf and remove the unnecessary "h"
-            leasetime="24"
-            change_setting "DHCP_LEASETIME" "${leasetime}"
-        else
-            leasetime="${DHCP_LEASETIME}h"
-        fi
+    if [[ "${DHCP_LEASETIME}" == "0" ]]; then
+        leasetime="infinite"
+    elif [[ "${DHCP_LEASETIME}" == "" ]]; then
+        leasetime="24"
+        change_setting "DHCP_LEASETIME" "${leasetime}"
+    elif [[ "${DHCP_LEASETIME}" == "24h" ]]; then
+        #Installation is affected by known bug, introduced in a previous version.
+        #This will automatically clean up setupVars.conf and remove the unnecessary "h"
+        leasetime="24"
+        change_setting "DHCP_LEASETIME" "${leasetime}"
+    else
+        leasetime="${DHCP_LEASETIME}h"
+    fi

-        # Write settings to file
-        echo "###############################################################################
+    # Write settings to file
+    echo "###############################################################################
 #  DHCP SERVER CONFIG FILE AUTOMATICALLY POPULATED BY PI-HOLE WEB INTERFACE.  #
 #            ANY CHANGES MADE TO THIS FILE WILL BE LOST ON CHANGE             #
 ###############################################################################
@@ -417,34 +442,34 @@ dhcp-option=option:router,${DHCP_ROUTER}
 dhcp-leasefile=/etc/pihole/dhcp.leases
 #quiet-dhcp
 " > "${dhcpconfig}"
-        chmod 644 "${dhcpconfig}"
+    chmod 644 "${dhcpconfig}"

-        if [[ "${PIHOLE_DOMAIN}" != "none" ]]; then
-            echo "domain=${PIHOLE_DOMAIN}" >> "${dhcpconfig}"
+    if [[ "${PIHOLE_DOMAIN}" != "none" ]]; then
+        echo "domain=${PIHOLE_DOMAIN}" >> "${dhcpconfig}"

-            # When there is a Pi-hole domain set and "Never forward non-FQDNs" is
-            # ticked, we add `local=/domain/` to tell FTL that this domain is purely
-            # local and FTL may answer queries from /etc/hosts or DHCP but should
-            # never forward queries on that domain to any upstream servers
-            if  [[ "${DNS_FQDN_REQUIRED}" == true ]]; then
-                echo "local=/${PIHOLE_DOMAIN}/" >> "${dhcpconfig}"
-            fi
+        # When there is a Pi-hole domain set and "Never forward non-FQDNs" is
+        # ticked, we add `local=/domain/` to tell FTL that this domain is purely
+        # local and FTL may answer queries from /etc/hosts or DHCP but should
+        # never forward queries on that domain to any upstream servers
+        if  [[ "${DNS_FQDN_REQUIRED}" == true ]]; then
+          echo "local=/${PIHOLE_DOMAIN}/" >> "${dhcpconfig}"
        fi
+    fi

-        # Sourced from setupVars
-        # shellcheck disable=SC2154
-        if [[ "${DHCP_rapid_commit}" == "true" ]]; then
-            echo "dhcp-rapid-commit" >> "${dhcpconfig}"
-        fi
+    # Sourced from setupVars
+    # shellcheck disable=SC2154
+    if [[ "${DHCP_rapid_commit}" == "true" ]]; then
+        echo "dhcp-rapid-commit" >> "${dhcpconfig}"
+    fi

-        if [[ "${DHCP_IPv6}" == "true" ]]; then
-            echo "#quiet-dhcp6
+    if [[ "${DHCP_IPv6}" == "true" ]]; then
+        echo "#quiet-dhcp6
 #enable-ra
 dhcp-option=option6:dns-server,[::]
 dhcp-range=::100,::1ff,constructor:${interface},ra-names,slaac,64,3600
 ra-param=*,0,0
 " >> "${dhcpconfig}"
-        fi
+    fi

    else
        if [[ -f "${dhcpconfig}" ]]; then
@@ -454,6 +479,19 @@ ra-param=*,0,0
 }

 EnableDHCP() {
+
+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a enabledhcp DHCP_START DHCP_END DHCP_ROUTER DHCP_LEASETIME PIHOLE_DOMAIN DHCP_IPv6 DHCP_rapid_commit
+        Set Pihole's built-in DHCP server.
+
+    DHCP_LEASETIME is in hours.  0 = infinite
+    DHCP_IPv6 [true/false]
+    DHCP_rapid_commit [true/false]"
+
+    exit 0
+fi
+
+
    change_setting "DHCP_ACTIVE" "true"
    change_setting "DHCP_START" "${args[2]}"
    change_setting "DHCP_END" "${args[3]}"
@@ -522,15 +560,27 @@ CustomizeAdLists() {
    local comment
    comment="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a adlist [action] [address]
+        Modify Pi-hole's adlists.
+
+Action:
+  add              Add an adlist. Append the optional argument [comment] to add an comment
+  del              Delete an adlist
+  enable           Enable an adlist
+  disbale          Disable an adlist"
+        exit 0
+  fi
+
    if CheckUrl "${address}"; then
        if [[ "${args[2]}" == "enable" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 1 WHERE address = '${address}'"
+            sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 1 WHERE address = '${address}'"
        elif [[ "${args[2]}" == "disable" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 0 WHERE address = '${address}'"
+            sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 0 WHERE address = '${address}'"
        elif [[ "${args[2]}" == "add" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "INSERT OR IGNORE INTO adlist (address, comment) VALUES ('${address}', '${comment}')"
+            sqlite3 "${gravityDBfile}" "INSERT OR IGNORE INTO adlist (address, comment) VALUES ('${address}', '${comment}')"
        elif [[ "${args[2]}" == "del" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM adlist WHERE address = '${address}'"
+            sqlite3 "${gravityDBfile}" "DELETE FROM adlist WHERE address = '${address}'"
        else
            echo "Not permitted"
            return 1
@@ -541,11 +591,19 @@ CustomizeAdLists() {
    fi
 }

+
 AddDHCPStaticAddress() {
    mac="${args[2]}"
    ip="${args[3]}"
    host="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a addstaticdhcp [MAC] [IP] [HOSTNAME]
+        Set an static DHCP lease."
+    exit 0
+    fi
+
+
    if [[ "${ip}" == "noip" ]]; then
        # Static host name
        echo "dhcp-host=${mac},${host}" >> "${dhcpstaticconfig}"
@@ -609,13 +667,12 @@ Example: 'pihole -a -i local'
 Specify dnsmasq's network interface listening behavior

 Interfaces:
-  local               Only respond to queries from devices that
-                      are at most one hop away (local devices)
-  single              Respond only on interface ${PIHOLE_INTERFACE}
-  bind                Bind only on interface ${PIHOLE_INTERFACE}
+  local               Listen on all interfaces, but only allow queries from
+                      devices that are at most one hop away (local devices)
+  single              Listen only on ${PIHOLE_INTERFACE} interface
  all                 Listen on all interfaces, permit all origins"
        exit 0
-    fi
+  fi

    if [[ "${args[2]}" == "all" ]]; then
        echo -e "  ${INFO} Listening on all interfaces, permitting all origins. Please use a firewall!"
@@ -623,9 +680,6 @@ Interfaces:
    elif [[ "${args[2]}" == "local" ]]; then
        echo -e "  ${INFO} Listening on all interfaces, permitting origins from one hop away (LAN)"
        change_setting "DNSMASQ_LISTENING" "local"
-    elif [[ "${args[2]}" == "bind" ]]; then
-        echo -e "  ${INFO} Binding on interface ${PIHOLE_INTERFACE}"
-        change_setting "DNSMASQ_LISTENING" "bind"
    else
        echo -e "  ${INFO} Listening only on interface ${PIHOLE_INTERFACE}"
        change_setting "DNSMASQ_LISTENING" "single"
@@ -641,17 +695,12 @@ Interfaces:
 }

 Teleporter() {
-    local filename
-    filename="${args[2]}"
-    if [[ -z "${filename}" ]]; then
-        local datetimestamp
-        local host
-        datetimestamp=$(date "+%Y-%m-%d_%H-%M-%S")
-        host=$(hostname)
-        host="${host//./_}"
-        filename="pi-hole-${host:-noname}-teleporter_${datetimestamp}.tar.gz"
-    fi
-    php /var/www/html/admin/scripts/pi-hole/php/teleporter.php > "${filename}"
+    local datetimestamp
+    local host
+    datetimestamp=$(date "+%Y-%m-%d_%H-%M-%S")
+    host=$(hostname)
+    host="${host//./_}"
+    php /var/www/html/admin/scripts/pi-hole/php/teleporter.php > "pi-hole-${host:-noname}-teleporter_${datetimestamp}.tar.gz"
 }

 checkDomain()
@@ -672,27 +721,27 @@ addAudit()
    domains=""
    for domain in "$@"
    do
-        # Check domain to be added. Only continue if it is valid
-        validDomain="$(checkDomain "${domain}")"
-        if [[ -n "${validDomain}" ]]; then
-            # Put comma in between domains when there is
-            # more than one domains to be added
-            # SQL INSERT allows adding multiple rows at once using the format
-            ## INSERT INTO table (domain) VALUES ('abc.de'),('fgh.ij'),('klm.no'),('pqr.st');
-            if [[ -n "${domains}" ]]; then
-                domains="${domains},"
-            fi
-            domains="${domains}('${domain}')"
+      # Check domain to be added. Only continue if it is valid
+      validDomain="$(checkDomain "${domain}")"
+      if [[ -n "${validDomain}" ]]; then
+        # Put comma in between domains when there is
+        # more than one domains to be added
+        # SQL INSERT allows adding multiple rows at once using the format
+        ## INSERT INTO table (domain) VALUES ('abc.de'),('fgh.ij'),('klm.no'),('pqr.st');
+        if [[ -n "${domains}" ]]; then
+          domains="${domains},"
        fi
+        domains="${domains}('${domain}')"
+      fi
    done
    # Insert only the domain here. The date_added field will be
    # filled with its default value (date_added = current timestamp)
-    pihole-FTL sqlite3 "${gravityDBfile}" "INSERT INTO domain_audit (domain) VALUES ${domains};"
+    sqlite3 "${gravityDBfile}" "INSERT INTO domain_audit (domain) VALUES ${domains};"
 }

 clearAudit()
 {
-    pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM domain_audit;"
+    sqlite3 "${gravityDBfile}" "DELETE FROM domain_audit;"
 }

 SetPrivacyLevel() {
@@ -710,6 +759,17 @@ AddCustomDNSAddress() {
    host="${args[3]}"
    reload="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a addcustomdns [IP] [HOSTNAME]
+        Add a Local DNS Record.
+        Optionally append 'false' to suppress restarting Pi-hole.
+        Note: added DNS records wont't have an effect until Pi-hole is
+        restarted.
+        "
+
+        exit 0
+  fi
+
    validHost="$(checkDomain "${host}")"
    if [[ -n "${validHost}" ]]; then
        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
@@ -725,7 +785,7 @@ AddCustomDNSAddress() {

    # Restart dnsmasq to load new custom DNS entries only if $reload not false
    if [[ ! $reload == "false" ]]; then
-        RestartDNS
+      RestartDNS
    fi
 }

@@ -736,22 +796,33 @@ RemoveCustomDNSAddress() {
    host="${args[3]}"
    reload="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a removecustomdns [IP] [HOSTNAME]
+        Remove a Local DNS Record.
+        Optionally append 'false' to suppress restarting Pi-hole.
+        Note: added DNS records wont't have an effect until Pi-hole is
+        restarted.
+        "
+
+        exit 0
+  fi
+
    validHost="$(checkDomain "${host}")"
    if [[ -n "${validHost}" ]]; then
        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
-            sed -i "/^${ip} ${validHost}$/Id" "${dnscustomfile}"
+            sed -i "/^${ip} ${validHost}$/d" "${dnscustomfile}"
        else
            echo -e "  ${CROSS} Invalid IP has been passed"
            exit 1
        fi
-    else
-        echo "  ${CROSS} Invalid Domain passed!"
-        exit 1
+        else
+            echo "  ${CROSS} Invalid Domain passed!"
+            exit 1
    fi

    # Restart dnsmasq to load new custom DNS entries only if reload is not false
    if [[ ! $reload == "false" ]]; then
-        RestartDNS
+      RestartDNS
    fi
 }

@@ -762,14 +833,25 @@ AddCustomCNAMERecord() {
    target="${args[3]}"
    reload="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a addcustomcname [DOMAIN] [TARGET]
+        Add a local CNAME record for Domain => Target
+        Optionally append 'false' to suppress restarting Pi-hole.
+        Note: added CNAME records wont't have an effect until Pi-hole is
+        restarted.
+        "
+
+        exit 0
+  fi
+
    validDomain="$(checkDomain "${domain}")"
    if [[ -n "${validDomain}" ]]; then
        validTarget="$(checkDomain "${target}")"
        if [[ -n "${validTarget}" ]]; then
-            echo "cname=${validDomain},${validTarget}" >> "${dnscustomcnamefile}"
+          echo "cname=${validDomain},${validTarget}" >> "${dnscustomcnamefile}"
        else
-            echo "  ${CROSS} Invalid Target Passed!"
-            exit 1
+          echo "  ${CROSS} Invalid Target Passed!"
+          exit 1
        fi
    else
        echo "  ${CROSS} Invalid Domain passed!"
@@ -777,7 +859,7 @@ AddCustomCNAMERecord() {
    fi
    # Restart dnsmasq to load new custom CNAME records only if reload is not false
    if [[ ! $reload == "false" ]]; then
-        RestartDNS
+      RestartDNS
    fi
 }

@@ -788,14 +870,25 @@ RemoveCustomCNAMERecord() {
    target="${args[3]}"
    reload="${args[4]}"

+    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
+        echo "Usage: pihole -a removecustomcname [DOMAIN] [TARGET]
+        Remove the local CNAME record for Domain => Target
+        Optionally append 'false' to suppress restarting Pi-hole.
+        Note: added CNAME records wont't have an effect until Pi-hole is
+        restarted.
+        "
+
+        exit 0
+  fi
+
    validDomain="$(checkDomain "${domain}")"
    if [[ -n "${validDomain}" ]]; then
        validTarget="$(checkDomain "${target}")"
        if [[ -n "${validTarget}" ]]; then
-            sed -i "/cname=${validDomain},${validTarget}$/Id" "${dnscustomcnamefile}"
+            sed -i "/cname=${validDomain},${validTarget}$/d" "${dnscustomcnamefile}"
        else
-            echo "  ${CROSS} Invalid Target Passed!"
-            exit 1
+          echo "  ${CROSS} Invalid Target Passed!"
+          exit 1
        fi
    else
        echo "  ${CROSS} Invalid Domain passed!"
@@ -804,7 +897,7 @@ RemoveCustomCNAMERecord() {

    # Restart dnsmasq to update removed custom CNAME records only if $reload not false
    if [[ ! $reload == "false" ]]; then
-        RestartDNS
+      RestartDNS
    fi
 }

@@ -822,25 +915,25 @@ main() {
        "poweroff"            ) Poweroff;;
        "reboot"              ) Reboot;;
        "restartdns"          ) RestartDNS;;
-        "setquerylog"         ) SetQueryLogOptions;;
-        "enabledhcp"          ) EnableDHCP;;
+        "setquerylog"         ) SetQueryLogOptions "$@";;
+        "enabledhcp"          ) EnableDHCP"$@";;
        "disabledhcp"         ) DisableDHCP;;
        "layout"              ) SetWebUILayout;;
        "theme"               ) SetWebUITheme;;
        "-h" | "--help"       ) helpFunc;;
-        "addstaticdhcp"       ) AddDHCPStaticAddress;;
+        "addstaticdhcp"       ) AddDHCPStaticAddress "$@";;
        "removestaticdhcp"    ) RemoveDHCPStaticAddress;;
        "-e" | "email"        ) SetAdminEmail "$3";;
        "-i" | "interface"    ) SetListeningMode "$@";;
        "-t" | "teleporter"   ) Teleporter;;
-        "adlist"              ) CustomizeAdLists;;
+        "adlist"              ) CustomizeAdLists "$@";;
        "audit"               ) addAudit "$@";;
        "clearaudit"          ) clearAudit;;
        "-l" | "privacylevel" ) SetPrivacyLevel;;
-        "addcustomdns"        ) AddCustomDNSAddress;;
-        "removecustomdns"     ) RemoveCustomDNSAddress;;
-        "addcustomcname"      ) AddCustomCNAMERecord;;
-        "removecustomcname"   ) RemoveCustomCNAMERecord;;
+        "addcustomdns"        ) AddCustomDNSAddress "$@";;
+        "removecustomdns"     ) RemoveCustomDNSAddress "$@";;
+        "addcustomcname"      ) AddCustomCNAMERecord "$@";;
+        "removecustomcname"   ) RemoveCustomCNAMERecord "$@";;
        *                     ) helpFunc;;
    esac

--- a/advanced/Templates/gravity_copy.sql
+++ b/advanced/Templates/gravity_copy.sql
@@ -12,17 +12,14 @@ INSERT OR REPLACE INTO "group" SELECT * FROM OLD."group";
 INSERT OR REPLACE INTO domain_audit SELECT * FROM OLD.domain_audit;

 INSERT OR REPLACE INTO domainlist SELECT * FROM OLD.domainlist;
-DELETE FROM OLD.domainlist_by_group WHERE domainlist_id NOT IN (SELECT id FROM OLD.domainlist);
 INSERT OR REPLACE INTO domainlist_by_group SELECT * FROM OLD.domainlist_by_group;

 INSERT OR REPLACE INTO adlist SELECT * FROM OLD.adlist;
-DELETE FROM OLD.adlist_by_group WHERE adlist_id NOT IN (SELECT id FROM OLD.adlist);
 INSERT OR REPLACE INTO adlist_by_group SELECT * FROM OLD.adlist_by_group;

 INSERT OR REPLACE INTO info SELECT * FROM OLD.info;

 INSERT OR REPLACE INTO client SELECT * FROM OLD.client;
-DELETE FROM OLD.client_by_group WHERE client_id NOT IN (SELECT id FROM OLD.client);
 INSERT OR REPLACE INTO client_by_group SELECT * FROM OLD.client_by_group;


--- a/advanced/Templates/pihole-FTL.conf
+++ b/advanced/Templates/pihole-FTL.conf
@@ -1,2 +0,0 @@
-#; Pi-hole FTL config file
-#; Comments should start with #; to avoid issues with PHP and bash reading this file
--- a/advanced/Templates/pihole-FTL.service
+++ b/advanced/Templates/pihole-FTL.service
@@ -21,15 +21,12 @@ start() {
  else
    # Touch files to ensure they exist (create if non-existing, preserve if existing)
    mkdir -pm 0755 /run/pihole
-    [ ! -f /run/pihole-FTL.pid ] && install -m 644 -o pihole -g pihole /dev/null /run/pihole-FTL.pid
-    [ ! -f /run/pihole-FTL.port ] && install -m 644 -o pihole -g pihole /dev/null /run/pihole-FTL.port
-    [ ! -f /var/log/pihole-FTL.log ] && install -m 644 -o pihole -g pihole /dev/null /var/log/pihole-FTL.log
-    [ ! -f /var/log/pihole.log ] && install -m 644 -o pihole -g pihole /dev/null /var/log/pihole.log
-    [ ! -f /etc/pihole/dhcp.leases ] && install -m 644 -o pihole -g pihole /dev/null /etc/pihole/dhcp.leases
+    touch /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases
    # Ensure that permissions are set so that pihole-FTL can edit all necessary files
-    chown pihole:pihole /run/pihole /etc/pihole /var/log/pihole.log /var/log/pihole.log /etc/pihole/dhcp.leases
+    chown pihole:pihole /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases /run/pihole /etc/pihole
+    chmod 0644 /run/pihole-FTL.pid /run/pihole-FTL.port /var/log/pihole-FTL.log /var/log/pihole.log /etc/pihole/dhcp.leases
    # Ensure that permissions are set so that pihole-FTL can edit the files. We ignore errors as the file may not (yet) exist
-    chmod -f 0644 /etc/pihole/macvendor.db /etc/pihole/dhcp.leases /var/log/pihole-FTL.log /var/log/pihole.log
+    chmod -f 0644 /etc/pihole/macvendor.db
    # Chown database files to the user FTL runs as. We ignore errors as the files may not (yet) exist
    chown -f pihole:pihole /etc/pihole/pihole-FTL.db /etc/pihole/gravity.db /etc/pihole/macvendor.db
    # Chown database file permissions so that the pihole group (web interface) can edit the file. We ignore errors as the files may not (yet) exist
--- a/advanced/lighttpd.conf.debian
+++ b/advanced/lighttpd.conf.debian
@@ -85,8 +85,8 @@ $HTTP["url"] =~ "^/admin/\.(.*)" {
    url.access-deny = ("")
 }

-# allow teleporter and API qr code iframe on settings page
-$HTTP["url"] =~ "/(teleporter|api_token)\.php$" {
+# allow teleporter iframe on settings page
+$HTTP["url"] =~ "/teleporter\.php$" {
    $HTTP["referer"] =~ "/admin/settings\.php" {
        setenv.add-response-header = ( "X-Frame-Options" => "SAMEORIGIN" )
    }
--- a/advanced/lighttpd.conf.fedora
+++ b/advanced/lighttpd.conf.fedora
@@ -93,8 +93,8 @@ $HTTP["url"] =~ "^/admin/\.(.*)" {
    url.access-deny = ("")
 }

-# allow teleporter and API qr code iframe on settings page
-$HTTP["url"] =~ "/(teleporter|api_token)\.php$" {
+# allow teleporter iframe on settings page
+$HTTP["url"] =~ "/teleporter\.php$" {
    $HTTP["referer"] =~ "/admin/settings\.php" {
        setenv.add-response-header = ( "X-Frame-Options" => "SAMEORIGIN" )
    }
--- a/install/basic-install.sh
+++ b/install/basic-install.sh
@@ -2,7 +2,7 @@
 # shellcheck disable=SC1090

 # Pi-hole: A black hole for Internet advertisements
-# (c) 2017-2021 Pi-hole, LLC (https://pi-hole.net)
+# (c) 2017-2018 Pi-hole, LLC (https://pi-hole.net)
 # Network-wide ad blocking via your own hardware.
 #
 # Installs and Updates Pi-hole
@@ -76,7 +76,7 @@ PI_HOLE_CONFIG_DIR="/etc/pihole"
 PI_HOLE_BIN_DIR="/usr/local/bin"
 PI_HOLE_BLOCKPAGE_DIR="${webroot}/pihole"
 if [ -z "$useUpdateVars" ]; then
-    useUpdateVars=false
+  useUpdateVars=false
 fi

 adlistFile="/etc/pihole/adlists.list"
@@ -90,7 +90,7 @@ PRIVACY_LEVEL=0
 CACHE_SIZE=10000

 if [ -z "${USER}" ]; then
-    USER="$(id -un)"
+  USER="$(id -un)"
 fi

 # whiptail dialog dimensions: 20 rows and 70 chars width assures to fit on small screens and is known to hold all content.
@@ -133,7 +133,7 @@ fi
 # A simple function that just echoes out our logo in ASCII format
 # This lets users know that it is a Pi-hole, LLC product
 show_ascii_berry() {
-    echo -e "
+  echo -e "
        ${COL_LIGHT_GREEN}.;;,.
        .ccccc:,.
         :cccclll:.      ..,,
@@ -172,7 +172,7 @@ os_check() {
        local remote_os_domain valid_os valid_version valid_response detected_os detected_version display_warning cmdResult digReturnCode response
        remote_os_domain=${OS_CHECK_DOMAIN_NAME:-"versions.pi-hole.net"}

-        detected_os=$(grep '^ID=' /etc/os-release | cut -d '=' -f2 | tr -d '"')
+        detected_os=$(grep "\bID\b" /etc/os-release | cut -d '=' -f2 | tr -d '"')
        detected_version=$(grep VERSION_ID /etc/os-release | cut -d '=' -f2 | tr -d '"')

        cmdResult="$(dig +short -t txt "${remote_os_domain}" @ns1.pi-hole.net 2>&1; echo $?)"
@@ -261,174 +261,174 @@ os_check() {

 # Compatibility
 package_manager_detect() {
-    # First check to see if apt-get is installed.
-    if is_command apt-get ; then
-        # Set some global variables here
-        # We don't set them earlier since the installed package manager might be rpm, so these values would be different
-        PKG_MANAGER="apt-get"
-        # A variable to store the command used to update the package cache
-        UPDATE_PKG_CACHE="${PKG_MANAGER} update"
-        # The command we will use to actually install packages
-        PKG_INSTALL=("${PKG_MANAGER}" -qq --no-install-recommends install)
-        # grep -c will return 1 if there are no matches. This is an acceptable condition, so we OR TRUE to prevent set -e exiting the script.
-        PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"
-        # Update package cache
-        update_package_cache || exit 1
-        # Check for and determine version number (major and minor) of current php install
-        local phpVer="php"
-        if is_command php ; then
-            printf "  %b Existing PHP installation detected : PHP version %s\\n" "${INFO}" "$(php <<< "<?php echo PHP_VERSION ?>")"
-            printf -v phpInsMajor "%d" "$(php <<< "<?php echo PHP_MAJOR_VERSION ?>")"
-            printf -v phpInsMinor "%d" "$(php <<< "<?php echo PHP_MINOR_VERSION ?>")"
-            phpVer="php$phpInsMajor.$phpInsMinor"
-        fi
-        # Packages required to perfom the os_check (stored as an array)
-        OS_CHECK_DEPS=(grep dnsutils)
-        # Packages required to run this install script (stored as an array)
-        INSTALLER_DEPS=(git iproute2 whiptail ca-certificates)
-        # Packages required to run Pi-hole (stored as an array)
-        PIHOLE_DEPS=(cron curl iputils-ping psmisc sudo unzip idn2 libcap2-bin dns-root-data libcap2 netcat-openbsd)
-        # Packages required for the Web admin interface (stored as an array)
-        # It's useful to separate this from Pi-hole, since the two repos are also setup separately
-        PIHOLE_WEB_DEPS=(lighttpd "${phpVer}-common" "${phpVer}-cgi" "${phpVer}-sqlite3" "${phpVer}-xml" "${phpVer}-intl")
-        # Prior to PHP8.0, JSON functionality is provided as dedicated module, required by Pi-hole AdminLTE: https://www.php.net/manual/json.installation.php
-        if [[ -z "${phpInsMajor}" || "${phpInsMajor}" -lt 8 ]]; then
-            PIHOLE_WEB_DEPS+=("${phpVer}-json")
-        fi
-        # The Web server user,
-        LIGHTTPD_USER="www-data"
-        # group,
-        LIGHTTPD_GROUP="www-data"
-        # and config file
-        LIGHTTPD_CFG="lighttpd.conf.debian"
-
-        # This function waits for dpkg to unlock, which signals that the previous apt-get command has finished.
-        test_dpkg_lock() {
-            i=0
-            # fuser is a program to show which processes use the named files, sockets, or filesystems
-            # So while the lock is held,
-            while fuser /var/lib/dpkg/lock >/dev/null 2>&1
-            do
-                # we wait half a second,
-                sleep 0.5
-                # increase the iterator,
-                ((i=i+1))
-            done
-            # and then report success once dpkg is unlocked.
-            return 0
-        }
-
-    # If apt-get is not found, check for rpm.
-    elif is_command rpm ; then
-        # Then check if dnf or yum is the package manager
-        if is_command dnf ; then
-            PKG_MANAGER="dnf"
-        else
-            PKG_MANAGER="yum"
-        fi
-
-        # These variable names match the ones for apt-get. See above for an explanation of what they are for.
-        PKG_INSTALL=("${PKG_MANAGER}" install -y)
-        PKG_COUNT="${PKG_MANAGER} check-update | egrep '(.i686|.x86|.noarch|.arm|.src)' | wc -l"
-        OS_CHECK_DEPS=(grep bind-utils)
-        INSTALLER_DEPS=(git iproute newt procps-ng which chkconfig ca-certificates)
-        PIHOLE_DEPS=(cronie curl findutils sudo unzip libidn2 psmisc libcap nmap-ncat)
-        PIHOLE_WEB_DEPS=(lighttpd lighttpd-fastcgi php-common php-cli php-pdo php-xml php-json php-intl)
-        LIGHTTPD_USER="lighttpd"
-        LIGHTTPD_GROUP="lighttpd"
-        LIGHTTPD_CFG="lighttpd.conf.fedora"
-
-    # If neither apt-get or yum/dnf package managers were found
-    else
-        # we cannot install required packages
-        printf "  %b No supported package manager found\\n" "${CROSS}"
-        # so exit the installer
-        exit
+# First check to see if apt-get is installed.
+if is_command apt-get ; then
+    # Set some global variables here
+    # We don't set them earlier since the installed package manager might be rpm, so these values would be different
+    PKG_MANAGER="apt-get"
+    # A variable to store the command used to update the package cache
+    UPDATE_PKG_CACHE="${PKG_MANAGER} update"
+    # The command we will use to actually install packages
+    PKG_INSTALL=("${PKG_MANAGER}" -qq --no-install-recommends install)
+    # grep -c will return 1 if there are no matches. This is an acceptable condition, so we OR TRUE to prevent set -e exiting the script.
+    PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"
+    # Update package cache
+    update_package_cache || exit 1
+    # Check for and determine version number (major and minor) of current php install
+    local phpVer="php"
+    if is_command php ; then
+        printf "  %b Existing PHP installation detected : PHP version %s\\n" "${INFO}" "$(php <<< "<?php echo PHP_VERSION ?>")"
+        printf -v phpInsMajor "%d" "$(php <<< "<?php echo PHP_MAJOR_VERSION ?>")"
+        printf -v phpInsMinor "%d" "$(php <<< "<?php echo PHP_MINOR_VERSION ?>")"
+        phpVer="php$phpInsMajor.$phpInsMinor"
    fi
+    # Packages required to perfom the os_check (stored as an array)
+    OS_CHECK_DEPS=(grep dnsutils)
+    # Packages required to run this install script (stored as an array)
+    INSTALLER_DEPS=(git iproute2 whiptail ca-certificates)
+    # Packages required to run Pi-hole (stored as an array)
+    PIHOLE_DEPS=(cron curl iputils-ping lsof psmisc sudo unzip idn2 sqlite3 libcap2-bin dns-root-data libcap2)
+    # Packages required for the Web admin interface (stored as an array)
+    # It's useful to separate this from Pi-hole, since the two repos are also setup separately
+    PIHOLE_WEB_DEPS=(lighttpd "${phpVer}-common" "${phpVer}-cgi" "${phpVer}-sqlite3" "${phpVer}-xml" "${phpVer}-intl")
+    # Prior to PHP8.0, JSON functionality is provided as dedicated module, required by Pi-hole AdminLTE: https://www.php.net/manual/json.installation.php
+    if [[ -z "${phpInsMajor}" || "${phpInsMajor}" -lt 8 ]]; then
+        PIHOLE_WEB_DEPS+=("${phpVer}-json")
+    fi
+    # The Web server user,
+    LIGHTTPD_USER="www-data"
+    # group,
+    LIGHTTPD_GROUP="www-data"
+    # and config file
+    LIGHTTPD_CFG="lighttpd.conf.debian"
+
+    # This function waits for dpkg to unlock, which signals that the previous apt-get command has finished.
+    test_dpkg_lock() {
+        i=0
+        # fuser is a program to show which processes use the named files, sockets, or filesystems
+        # So while the lock is held,
+        while fuser /var/lib/dpkg/lock >/dev/null 2>&1
+        do
+            # we wait half a second,
+            sleep 0.5
+            # increase the iterator,
+            ((i=i+1))
+        done
+        # and then report success once dpkg is unlocked.
+        return 0
+    }
+
+# If apt-get is not found, check for rpm.
+elif is_command rpm ; then
+    # Then check if dnf or yum is the package manager
+    if is_command dnf ; then
+        PKG_MANAGER="dnf"
+    else
+        PKG_MANAGER="yum"
+    fi
+
+    # These variable names match the ones for apt-get. See above for an explanation of what they are for.
+    PKG_INSTALL=("${PKG_MANAGER}" install -y)
+    PKG_COUNT="${PKG_MANAGER} check-update | egrep '(.i686|.x86|.noarch|.arm|.src)' | wc -l"
+    OS_CHECK_DEPS=(grep bind-utils)
+    INSTALLER_DEPS=(git iproute newt procps-ng which chkconfig ca-certificates)
+    PIHOLE_DEPS=(cronie curl findutils sudo unzip libidn2 psmisc sqlite libcap lsof)
+    PIHOLE_WEB_DEPS=(lighttpd lighttpd-fastcgi php-common php-cli php-pdo php-xml php-json php-intl)
+    LIGHTTPD_USER="lighttpd"
+    LIGHTTPD_GROUP="lighttpd"
+    LIGHTTPD_CFG="lighttpd.conf.fedora"
+
+# If neither apt-get or yum/dnf package managers were found
+else
+    # we cannot install required packages
+    printf "  %b No supported package manager found\\n" "${CROSS}"
+    # so exit the installer
+    exit
+fi
 }

 select_rpm_php(){
-    # If the host OS is Fedora,
-    if grep -qiE 'fedora|fedberry' /etc/redhat-release; then
-        # all required packages should be available by default with the latest fedora release
-        : # continue
-    # or if host OS is CentOS,
-    elif grep -qiE 'centos|scientific' /etc/redhat-release; then
-        # Pi-Hole currently supports CentOS 7+ with PHP7+
-        SUPPORTED_CENTOS_VERSION=7
-        SUPPORTED_CENTOS_PHP_VERSION=7
-        # Check current CentOS major release version
-        CURRENT_CENTOS_VERSION=$(grep -oP '(?<= )[0-9]+(?=\.?)' /etc/redhat-release)
-        # Check if CentOS version is supported
-        if [[ $CURRENT_CENTOS_VERSION -lt $SUPPORTED_CENTOS_VERSION ]]; then
-            printf "  %b CentOS %s is not supported.\\n" "${CROSS}" "${CURRENT_CENTOS_VERSION}"
-            printf "      Please update to CentOS release %s or later.\\n" "${SUPPORTED_CENTOS_VERSION}"
-            # exit the installer
-            exit
-        fi
-        # php-json is not required on CentOS 7 as it is already compiled into php
-        # verifiy via `php -m | grep json`
-        if [[ $CURRENT_CENTOS_VERSION -eq 7 ]]; then
-            # create a temporary array as arrays are not designed for use as mutable data structures
-            CENTOS7_PIHOLE_WEB_DEPS=()
-            for i in "${!PIHOLE_WEB_DEPS[@]}"; do
-                if [[ ${PIHOLE_WEB_DEPS[i]} != "php-json" ]]; then
-                    CENTOS7_PIHOLE_WEB_DEPS+=( "${PIHOLE_WEB_DEPS[i]}" )
-                fi
-            done
-            # re-assign the clean dependency array back to PIHOLE_WEB_DEPS
-            PIHOLE_WEB_DEPS=("${CENTOS7_PIHOLE_WEB_DEPS[@]}")
-            unset CENTOS7_PIHOLE_WEB_DEPS
-        fi
-        # CentOS requires the EPEL repository to gain access to Fedora packages
-        EPEL_PKG="epel-release"
-        rpm -q ${EPEL_PKG} &> /dev/null || rc=$?
-        if [[ $rc -ne 0 ]]; then
-            printf "  %b Enabling EPEL package repository (https://fedoraproject.org/wiki/EPEL)\\n" "${INFO}"
-            "${PKG_INSTALL[@]}" ${EPEL_PKG} &> /dev/null
-            printf "  %b Installed %s\\n" "${TICK}" "${EPEL_PKG}"
-        fi
+# If the host OS is Fedora,
+if grep -qiE 'fedora|fedberry' /etc/redhat-release; then
+    # all required packages should be available by default with the latest fedora release
+    : # continue
+# or if host OS is CentOS,
+elif grep -qiE 'centos|scientific' /etc/redhat-release; then
+    # Pi-Hole currently supports CentOS 7+ with PHP7+
+    SUPPORTED_CENTOS_VERSION=7
+    SUPPORTED_CENTOS_PHP_VERSION=7
+    # Check current CentOS major release version
+    CURRENT_CENTOS_VERSION=$(grep -oP '(?<= )[0-9]+(?=\.?)' /etc/redhat-release)
+    # Check if CentOS version is supported
+    if [[ $CURRENT_CENTOS_VERSION -lt $SUPPORTED_CENTOS_VERSION ]]; then
+        printf "  %b CentOS %s is not supported.\\n" "${CROSS}" "${CURRENT_CENTOS_VERSION}"
+        printf "      Please update to CentOS release %s or later.\\n" "${SUPPORTED_CENTOS_VERSION}"
+        # exit the installer
+        exit
+    fi
+    # php-json is not required on CentOS 7 as it is already compiled into php
+    # verifiy via `php -m | grep json`
+    if [[ $CURRENT_CENTOS_VERSION -eq 7 ]]; then
+        # create a temporary array as arrays are not designed for use as mutable data structures
+        CENTOS7_PIHOLE_WEB_DEPS=()
+        for i in "${!PIHOLE_WEB_DEPS[@]}"; do
+            if [[ ${PIHOLE_WEB_DEPS[i]} != "php-json" ]]; then
+                CENTOS7_PIHOLE_WEB_DEPS+=( "${PIHOLE_WEB_DEPS[i]}" )
+            fi
+        done
+        # re-assign the clean dependency array back to PIHOLE_WEB_DEPS
+        PIHOLE_WEB_DEPS=("${CENTOS7_PIHOLE_WEB_DEPS[@]}")
+        unset CENTOS7_PIHOLE_WEB_DEPS
+    fi
+    # CentOS requires the EPEL repository to gain access to Fedora packages
+    EPEL_PKG="epel-release"
+    rpm -q ${EPEL_PKG} &> /dev/null || rc=$?
+    if [[ $rc -ne 0 ]]; then
+        printf "  %b Enabling EPEL package repository (https://fedoraproject.org/wiki/EPEL)\\n" "${INFO}"
+        "${PKG_INSTALL[@]}" ${EPEL_PKG} &> /dev/null
+        printf "  %b Installed %s\\n" "${TICK}" "${EPEL_PKG}"
+    fi

-        # The default php on CentOS 7.x is 5.4 which is EOL
-        # Check if the version of PHP available via installed repositories is >= to PHP 7
-        AVAILABLE_PHP_VERSION=$("${PKG_MANAGER}" info php | grep -i version | grep -o '[0-9]\+' | head -1)
-        if [[ $AVAILABLE_PHP_VERSION -ge $SUPPORTED_CENTOS_PHP_VERSION ]]; then
-            # Since PHP 7 is available by default, install via default PHP package names
-            : # do nothing as PHP is current
+    # The default php on CentOS 7.x is 5.4 which is EOL
+    # Check if the version of PHP available via installed repositories is >= to PHP 7
+    AVAILABLE_PHP_VERSION=$("${PKG_MANAGER}" info php | grep -i version | grep -o '[0-9]\+' | head -1)
+    if [[ $AVAILABLE_PHP_VERSION -ge $SUPPORTED_CENTOS_PHP_VERSION ]]; then
+        # Since PHP 7 is available by default, install via default PHP package names
+        : # do nothing as PHP is current
+    else
+        REMI_PKG="remi-release"
+        REMI_REPO="remi-php72"
+        rpm -q ${REMI_PKG} &> /dev/null || rc=$?
+    if [[ $rc -ne 0 ]]; then
+        # The PHP version available via default repositories is older than version 7
+        if ! whiptail --defaultno --title "PHP 7 Update (recommended)" --yesno "PHP 7.x is recommended for both security and language features.\\nWould you like to install PHP7 via Remi's RPM repository?\\n\\nSee: https://rpms.remirepo.net for more information" "${r}" "${c}"; then
+            # User decided to NOT update PHP from REMI, attempt to install the default available PHP version
+            printf "  %b User opt-out of PHP 7 upgrade on CentOS. Deprecated PHP may be in use.\\n" "${INFO}"
+            : # continue with unsupported php version
        else
-            REMI_PKG="remi-release"
-            REMI_REPO="remi-php72"
-            rpm -q ${REMI_PKG} &> /dev/null || rc=$?
-            if [[ $rc -ne 0 ]]; then
-                # The PHP version available via default repositories is older than version 7
-                if ! whiptail --defaultno --title "PHP 7 Update (recommended)" --yesno "PHP 7.x is recommended for both security and language features.\\nWould you like to install PHP7 via Remi's RPM repository?\\n\\nSee: https://rpms.remirepo.net for more information" "${r}" "${c}"; then
-                    # User decided to NOT update PHP from REMI, attempt to install the default available PHP version
-                    printf "  %b User opt-out of PHP 7 upgrade on CentOS. Deprecated PHP may be in use.\\n" "${INFO}"
-                    : # continue with unsupported php version
-                else
-                    printf "  %b Enabling Remi's RPM repository (https://rpms.remirepo.net)\\n" "${INFO}"
-                    "${PKG_INSTALL[@]}" "https://rpms.remirepo.net/enterprise/${REMI_PKG}-$(rpm -E '%{rhel}').rpm" &> /dev/null
-                    # enable the PHP 7 repository via yum-config-manager (provided by yum-utils)
-                    "${PKG_INSTALL[@]}" "yum-utils" &> /dev/null
-                    yum-config-manager --enable ${REMI_REPO} &> /dev/null
-                    printf "  %b Remi's RPM repository has been enabled for PHP7\\n" "${TICK}"
-                    # trigger an install/update of PHP to ensure previous version of PHP is updated from REMI
-                    if "${PKG_INSTALL[@]}" "php-cli" &> /dev/null; then
-                        printf "  %b PHP7 installed/updated via Remi's RPM repository\\n" "${TICK}"
-                    else
-                        printf "  %b There was a problem updating to PHP7 via Remi's RPM repository\\n" "${CROSS}"
-                        exit 1
-                    fi
-                fi
-            fi    # Warn user of unsupported version of Fedora or CentOS
-            if ! whiptail --defaultno --title "Unsupported RPM based distribution" --yesno "Would you like to continue installation on an unsupported RPM based distribution?\\n\\nPlease ensure the following packages have been installed manually:\\n\\n- lighttpd\\n- lighttpd-fastcgi\\n- PHP version 7+" "${r}" "${c}"; then
-                printf "  %b Aborting installation due to unsupported RPM based distribution\\n" "${CROSS}"
-                exit
+            printf "  %b Enabling Remi's RPM repository (https://rpms.remirepo.net)\\n" "${INFO}"
+            "${PKG_INSTALL[@]}" "https://rpms.remirepo.net/enterprise/${REMI_PKG}-$(rpm -E '%{rhel}').rpm" &> /dev/null
+            # enable the PHP 7 repository via yum-config-manager (provided by yum-utils)
+            "${PKG_INSTALL[@]}" "yum-utils" &> /dev/null
+            yum-config-manager --enable ${REMI_REPO} &> /dev/null
+            printf "  %b Remi's RPM repository has been enabled for PHP7\\n" "${TICK}"
+            # trigger an install/update of PHP to ensure previous version of PHP is updated from REMI
+            if "${PKG_INSTALL[@]}" "php-cli" &> /dev/null; then
+                printf "  %b PHP7 installed/updated via Remi's RPM repository\\n" "${TICK}"
            else
-                printf "  %b Continuing installation with unsupported RPM based distribution\\n" "${INFO}"
+                printf "  %b There was a problem updating to PHP7 via Remi's RPM repository\\n" "${CROSS}"
+                exit 1
            fi
        fi
+    fi    # Warn user of unsupported version of Fedora or CentOS
+    if ! whiptail --defaultno --title "Unsupported RPM based distribution" --yesno "Would you like to continue installation on an unsupported RPM based distribution?\\n\\nPlease ensure the following packages have been installed manually:\\n\\n- lighttpd\\n- lighttpd-fastcgi\\n- PHP version 7+" "${r}" "${c}"; then
+        printf "  %b Aborting installation due to unsupported RPM based distribution\\n" "${CROSS}"
+        exit
+    else
+        printf "  %b Continuing installation with unsupported RPM based distribution\\n" "${INFO}"
    fi
+fi
+fi
 }

 # A function for checking if a directory is a git repository
@@ -519,7 +519,7 @@ update_repo() {
    # In case extra commits have been added after tagging/release (i.e in case of metadata updates/README.MD tweaks)
    curBranch=$(git rev-parse --abbrev-ref HEAD)
    if [[ "${curBranch}" == "master" ]]; then
-        git reset --hard "$(git describe --abbrev=0 --tags)" || return $?
+         git reset --hard "$(git describe --abbrev=0 --tags)" || return $?
    fi
    # Show a completion message
    printf "%b  %b %s\\n" "${OVER}" "${TICK}" "${str}"
@@ -629,12 +629,12 @@ welcomeDialogs() {
 IMPORTANT: If you have not already done so, you must ensure that this device has a static IP. Either through DHCP reservation, or by manually assigning one. Depending on your operating system, there are many ways to achieve this.

 Choose yes to indicate that you have understood this message, and wish to continue" "${r}" "${c}"; then
-        #Nothing to do, continue
-        echo
-    else
-        printf "  %b Installer exited at static IP message.\\n" "${INFO}"
-        exit 1
-    fi
+#Nothing to do, continue
+  echo
+else
+  printf "  %b Installer exited at static IP message.\\n" "${INFO}"
+  exit 1
+fi
 }

 # A function that lets the user pick an interface to use with Pi-hole
@@ -674,7 +674,7 @@ chooseInterface() {
        # Feed the available interfaces into this while loop
        done <<< "${availableInterfaces}"
        # The whiptail command that will be run, stored in a variable
-        chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface (press space to toggle selection)" "${r}" "${c}" 6)
+        chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface (press space to toggle selection)" "${r}" "${c}" "${interfaceCount}")
        # Now run the command using the interfaces saved into the array
        chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) || \
        # If the user chooses Cancel, exit
@@ -759,8 +759,9 @@ collect_v4andv6_information() {
    printf "  %b IPv4 address: %s\\n" "${INFO}" "${IPV4_ADDRESS}"
    # if `dhcpcd` is used offer to set this as static IP for the device
    if [[ -f "/etc/dhcpcd.conf" ]]; then
-        # configure networking via dhcpcd
-        getStaticIPv4Settings
+            # configure networking via dhcpcd
+            getStaticIPv4Settings
+            setDHCPCD
    fi
    find_IPv6_information
    printf "  %b IPv6 address: %s\\n" "${INFO}" "${IPV6_ADDRESS}"
@@ -769,59 +770,47 @@ collect_v4andv6_information() {
 getStaticIPv4Settings() {
    # Local, named variables
    local ipSettingsCorrect
-    local DHCPChoice
    # Ask if the user wants to use DHCP settings as their static IP
    # This is useful for users that are using DHCP reservations; then we can just use the information gathered via our functions
-    DHCPChoice=$(whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --menu --separate-output "Do you want to use your current network settings as a static address? \\n
-          IP address:    ${IPV4_ADDRESS} \\n
-          Gateway:       ${IPv4gw} \\n" "${r}" "${c}" 3\
-          "Yes" "Set static IP using current values" \
-          "No" "Set static IP using custom values" \
-          "Skip" "I will set a static IP later, or have already done so" 3>&2 2>&1 1>&3) || \
-          { printf "  %bCancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"; exit 1; }
-
-    case ${DHCPChoice} in
-        "Yes")
+    if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
+          IP address:    ${IPV4_ADDRESS}
+          Gateway:       ${IPv4gw}" "${r}" "${c}"; then
        # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
        whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
-        If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
-        It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." "${r}" "${c}"
-        # Nothing else to do since the variables are already set above
-        setDHCPCD
-        ;;
+If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
+It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." "${r}" "${c}"
+    # Nothing else to do since the variables are already set above
+    else
+    # Otherwise, we need to ask the user to input their desired settings.
+    # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
+    # Start a loop to let the user enter their information with the chance to go back and edit it if necessary
+    until [[ "${ipSettingsCorrect}" = True ]]; do

-        "No")
-        # Otherwise, we need to ask the user to input their desired settings.
-        # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
-        # Start a loop to let the user enter their information with the chance to go back and edit it if necessary
-        until [[ "${ipSettingsCorrect}" = True ]]; do
+        # Ask for the IPv4 address
+        IPV4_ADDRESS=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" "${r}" "${c}" "${IPV4_ADDRESS}" 3>&1 1>&2 2>&3) || \
+        # Canceling IPv4 settings window
+        { ipSettingsCorrect=False; echo -e "  ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
+        printf "  %b Your static IPv4 address: %s\\n" "${INFO}" "${IPV4_ADDRESS}"

-            # Ask for the IPv4 address
-            IPV4_ADDRESS=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" "${r}" "${c}" "${IPV4_ADDRESS}" 3>&1 1>&2 2>&3) || \
-            # Canceling IPv4 settings window
-            { ipSettingsCorrect=False; echo -e "  ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
-            printf "  %b Your static IPv4 address: %s\\n" "${INFO}" "${IPV4_ADDRESS}"
+        # Ask for the gateway
+        IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" "${r}" "${c}" "${IPv4gw}" 3>&1 1>&2 2>&3) || \
+        # Canceling gateway settings window
+        { ipSettingsCorrect=False; echo -e "  ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
+        printf "  %b Your static IPv4 gateway: %s\\n" "${INFO}" "${IPv4gw}"

-            # Ask for the gateway
-            IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" "${r}" "${c}" "${IPv4gw}" 3>&1 1>&2 2>&3) || \
-            # Canceling gateway settings window
-            { ipSettingsCorrect=False; echo -e "  ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
-            printf "  %b Your static IPv4 gateway: %s\\n" "${INFO}" "${IPv4gw}"
-
-            # Give the user a chance to review their settings before moving on
-            if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
-                IP address: ${IPV4_ADDRESS}
-                Gateway:    ${IPv4gw}" "${r}" "${c}"; then
-                    # After that's done, the loop ends and we move on
-                    ipSettingsCorrect=True
-                else
-                    # If the settings are wrong, the loop continues
-                    ipSettingsCorrect=False
-                fi
-            done
-        setDHCPCD
-        ;;
-    esac
+        # Give the user a chance to review their settings before moving on
+        if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
+            IP address: ${IPV4_ADDRESS}
+            Gateway:    ${IPv4gw}" "${r}" "${c}"; then
+                # After that's done, the loop ends and we move on
+                ipSettingsCorrect=True
+        else
+            # If the settings are wrong, the loop continues
+            ipSettingsCorrect=False
+        fi
+    done
+    # End the if statement for DHCP vs. static
+    fi
 }

 # Configure networking via dhcpcd
@@ -856,7 +845,7 @@ valid_ip() {
    # Regex matching an optional port (starting with '#') range of 1-65536
    local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
    # Build a full IPv4 regex from the above subexpressions
-    local regex="^${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}${portelem}$"
+    local regex="^${ipv4elem}\.${ipv4elem}\.${ipv4elem}\.${ipv4elem}${portelem}$"

    # Evaluate the regex, and return the result
    [[ $ip =~ ${regex} ]]
@@ -913,8 +902,8 @@ setDNS() {
    IFS=${OIFS}
    # In a whiptail dialog, show the options
    DNSchoices=$(whiptail --separate-output --menu "Select Upstream DNS Provider. To use your own, select Custom." "${r}" "${c}" 7 \
-        "${DNSChooseOptions[@]}" 2>&1 >/dev/tty) || \
-        # Exit if the user selects "Cancel"
+    "${DNSChooseOptions[@]}" 2>&1 >/dev/tty) || \
+    # Exit if the user selects "Cancel"
    { printf "  %bCancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"; exit 1; }

    # Depending on the user's choice, set the GLOBAL variables to the IP of the respective provider
@@ -1128,11 +1117,8 @@ chooseBlocklists() {
        appendToListsFile "${choice}"
    done
    # Create an empty adList file with appropriate permissions.
-    if [ ! -f "${adlistFile}" ]; then
-        install -m 644 /dev/null "${adlistFile}"
-    else
-        chmod 644 "${adlistFile}"
-    fi
+    touch "${adlistFile}"
+    chmod 644 "${adlistFile}"
 }

 # Accept a string parameter, it must be one of the default lists
@@ -1183,8 +1169,8 @@ version_check_dnsmasq() {
            install -D -m 644 -T "${dnsmasq_original_config}" "${dnsmasq_conf}"
            printf "%b  %b Restoring default dnsmasq.conf...\\n" "${OVER}"  "${TICK}"
        else
-            # Otherwise, don't to anything
-            printf " it is not a Pi-hole file, leaving alone!\\n"
+        # Otherwise, don't to anything
+        printf " it is not a Pi-hole file, leaving alone!\\n"
        fi
    else
        # If a file cannot be found,
@@ -1219,8 +1205,8 @@ version_check_dnsmasq() {
        sed -i '/^server=@DNS2@/d' "${dnsmasq_pihole_01_target}"
    fi

-    # Set the cache size
-    sed -i "s/@CACHE_SIZE@/$CACHE_SIZE/" "${dnsmasq_pihole_01_target}"
+	# Set the cache size
+	sed -i "s/@CACHE_SIZE@/$CACHE_SIZE/" "${dnsmasq_pihole_01_target}"

    sed -i 's/^#conf-dir=\/etc\/dnsmasq.d$/conf-dir=\/etc\/dnsmasq.d/' "${dnsmasq_conf}"

@@ -1302,10 +1288,10 @@ installConfigs() {
    echo "${DNS_SERVERS}" > "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"
    chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf"

-    # Install template file if it does not exist
+    # Install empty file if it does not exist
    if [[ ! -r "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" ]]; then
        install -d -m 0755 ${PI_HOLE_CONFIG_DIR}
-        if ! install -T -o pihole -m 664 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.conf" "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" &>/dev/null; then
+        if ! install -o pihole -m 664 /dev/null "${PI_HOLE_CONFIG_DIR}/pihole-FTL.conf" &>/dev/null; then
            printf "  %bError: Unable to initialize configuration file %s/pihole-FTL.conf\\n" "${COL_LIGHT_RED}" "${PI_HOLE_CONFIG_DIR}"
            return 1
        fi
@@ -1333,12 +1319,11 @@ installConfigs() {
        # and copy in the config file Pi-hole needs
        install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/advanced/${LIGHTTPD_CFG} "${lighttpdConfig}"
        # Make sure the external.conf file exists, as lighttpd v1.4.50 crashes without it
-        if [ ! -f /etc/lighttpd/external.conf ]; then
-            install -m 644 /dev/null /etc/lighttpd/external.conf
-        fi
+        touch /etc/lighttpd/external.conf
+        chmod 644 /etc/lighttpd/external.conf
        # If there is a custom block page in the html/pihole directory, replace 404 handler in lighttpd config
        if [[ -f "${PI_HOLE_BLOCKPAGE_DIR}/custom.php" ]]; then
-            sed -i 's/^\(server\.error-handler-404\s*=\s*\).*$/\1"\/pihole\/custom\.php"/' "${lighttpdConfig}"
+            sed -i 's/^\(server\.error-handler-404\s*=\s*\).*$/\1"pihole\/custom\.php"/' "${lighttpdConfig}"
        fi
        # Make the directories if they do not exist and set the owners
        mkdir -p /run/lighttpd
@@ -1375,12 +1360,7 @@ install_manpage() {
    # Testing complete, copy the files & update the man db
    install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/manpages/pihole.8 /usr/local/share/man/man8/pihole.8
    install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/manpages/pihole-FTL.8 /usr/local/share/man/man8/pihole-FTL.8
-
-    # remove previously installed "pihole-FTL.conf.5" man page
-    if [[ -f "/usr/local/share/man/man5/pihole-FTL.conf.5" ]]; then
-        rm /usr/local/share/man/man5/pihole-FTL.conf.5
-    fi
-
+    install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/manpages/pihole-FTL.conf.5 /usr/local/share/man/man5/pihole-FTL.conf.5
    if mandb -q &>/dev/null; then
        # Updated successfully
        printf "%b  %b man pages installed and database updated\\n" "${OVER}" "${TICK}"
@@ -1388,7 +1368,7 @@ install_manpage() {
    else
        # Something is wrong with the system's man installation, clean up
        # our files, (leave everything how we found it).
-        rm /usr/local/share/man/man8/pihole.8 /usr/local/share/man/man8/pihole-FTL.8
+        rm /usr/local/share/man/man8/pihole.8 /usr/local/share/man/man8/pihole-FTL.8 /usr/local/share/man/man5/pihole-FTL.conf.5
        printf "%b  %b man page db not updated, man pages not installed\\n" "${OVER}" "${CROSS}"
    fi
 }
@@ -1501,14 +1481,8 @@ update_package_cache() {
        printf "%b  %b %s\\n" "${OVER}" "${TICK}" "${str}"
    else
        # Otherwise, show an error and exit
-
-        # In case we used apt-get and apt is also available, we use this as recommendation as we have seen it
-        # gives more user-friendly (interactive) advice
-        if [[ ${PKG_MANAGER} == "apt-get" ]] && is_command apt ; then
-            UPDATE_PKG_CACHE="apt update"
-        fi
        printf "%b  %b %s\\n" "${OVER}" "${CROSS}" "${str}"
-        printf "  %bError: Unable to update package cache. Please try \"%s\"%b\\n" "${COL_LIGHT_RED}" "sudo ${UPDATE_PKG_CACHE}" "${COL_NC}"
+        printf "  %bError: Unable to update package cache. Please try \"%s\"%b" "${COL_LIGHT_RED}" "sudo ${UPDATE_PKG_CACHE}" "${COL_NC}"
        return 1
    fi
 }
@@ -1574,7 +1548,7 @@ install_dependent_packages() {

    # Install Fedora/CentOS packages
    for i in "$@"; do
-        # For each package, check if it's already installed (and if so, don't add it to the installArray)
+    # For each package, check if it's already installed (and if so, don't add it to the installArray)
        printf "  %b Checking for %s..." "${INFO}" "${i}"
        if "${PKG_MANAGER}" -q list installed "${i}" &> /dev/null; then
            printf "%b  %b Checking for %s\\n" "${OVER}" "${TICK}" "${i}"
@@ -1740,23 +1714,22 @@ finalExports() {
    # If the setup variable file exists,
    if [[ -e "${setupVars}" ]]; then
        # update the variables in the file
-        sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1\b/d;/PIHOLE_DNS_2\b/d;/QUERY_LOGGING/d;/INSTALL_WEB_SERVER/d;/INSTALL_WEB_INTERFACE/d;/LIGHTTPD_ENABLED/d;/CACHE_SIZE/d;/DNS_FQDN_REQUIRED/d;/DNS_BOGUS_PRIV/d;/DNSMASQ_LISTENING/d;' "${setupVars}"
+        sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1\b/d;/PIHOLE_DNS_2\b/d;/QUERY_LOGGING/d;/INSTALL_WEB_SERVER/d;/INSTALL_WEB_INTERFACE/d;/LIGHTTPD_ENABLED/d;/CACHE_SIZE/d;/DNS_FQDN_REQUIRED/d;/DNS_BOGUS_PRIV/d;' "${setupVars}"
    fi
    # echo the information to the user
    {
-        echo "PIHOLE_INTERFACE=${PIHOLE_INTERFACE}"
-        echo "IPV4_ADDRESS=${IPV4_ADDRESS}"
-        echo "IPV6_ADDRESS=${IPV6_ADDRESS}"
-        echo "PIHOLE_DNS_1=${PIHOLE_DNS_1}"
-        echo "PIHOLE_DNS_2=${PIHOLE_DNS_2}"
-        echo "QUERY_LOGGING=${QUERY_LOGGING}"
-        echo "INSTALL_WEB_SERVER=${INSTALL_WEB_SERVER}"
-        echo "INSTALL_WEB_INTERFACE=${INSTALL_WEB_INTERFACE}"
-        echo "LIGHTTPD_ENABLED=${LIGHTTPD_ENABLED}"
-        echo "CACHE_SIZE=${CACHE_SIZE}"
-        echo "DNS_FQDN_REQUIRED=${DNS_FQDN_REQUIRED:-true}"
-        echo "DNS_BOGUS_PRIV=${DNS_BOGUS_PRIV:-true}"
-        echo "DNSMASQ_LISTENING=${DNSMASQ_LISTENING:-local}"
+    echo "PIHOLE_INTERFACE=${PIHOLE_INTERFACE}"
+    echo "IPV4_ADDRESS=${IPV4_ADDRESS}"
+    echo "IPV6_ADDRESS=${IPV6_ADDRESS}"
+    echo "PIHOLE_DNS_1=${PIHOLE_DNS_1}"
+    echo "PIHOLE_DNS_2=${PIHOLE_DNS_2}"
+    echo "QUERY_LOGGING=${QUERY_LOGGING}"
+    echo "INSTALL_WEB_SERVER=${INSTALL_WEB_SERVER}"
+    echo "INSTALL_WEB_INTERFACE=${INSTALL_WEB_INTERFACE}"
+    echo "LIGHTTPD_ENABLED=${LIGHTTPD_ENABLED}"
+    echo "CACHE_SIZE=${CACHE_SIZE}"
+    echo "DNS_FQDN_REQUIRED=${DNS_FQDN_REQUIRED:-true}"
+    echo "DNS_BOGUS_PRIV=${DNS_BOGUS_PRIV:-true}"
    }>> "${setupVars}"
    chmod 644 "${setupVars}"

@@ -1872,7 +1845,7 @@ checkSelinux() {
    local CURRENT_SELINUX
    local SELINUX_ENFORCING=0
    # Check for SELinux configuration file and getenforce command
-    if [[ -f /etc/selinux/config ]] && is_command getenforce; then
+    if [[ -f /etc/selinux/config ]] && command -v getenforce &> /dev/null; then
        # Check the default SELinux mode
        DEFAULT_SELINUX=$(awk -F= '/^SELINUX=/ {print $2}' /etc/selinux/config)
        case "${DEFAULT_SELINUX,,}" in
@@ -1931,7 +1904,7 @@ displayFinalMessage() {
        additional="View the web interface at http://pi.hole/admin or http://${IPV4_ADDRESS%/*}/admin

 Your Admin Webpage login password is ${pwstring}"
-    fi
+   fi

    # Final completion message to user
    whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
@@ -2104,6 +2077,7 @@ clone_or_update_repos() {
 # shellcheck disable=SC2120
 FTLinstall() {
    # Local, named variables
+    local latesttag
    local str="Downloading and Installing FTL"
    printf "  %b %s..." "${INFO}" "${str}"

@@ -2174,7 +2148,7 @@ FTLinstall() {

 disable_dnsmasq() {
    # dnsmasq can now be stopped and disabled if it exists
-    if is_command dnsmasq; then
+    if which dnsmasq &> /dev/null; then
        if check_service_active "dnsmasq";then
            printf "  %b FTL can now resolve DNS Queries without dnsmasq running separately\\n" "${INFO}"
            stop_service dnsmasq
@@ -2287,7 +2261,7 @@ FTLcheckUpdate() {
    printf "  %b Checking for existing FTL binary...\\n" "${INFO}"

    local ftlLoc
-    ftlLoc=$(command -v pihole-FTL 2>/dev/null)
+    ftlLoc=$(which pihole-FTL 2>/dev/null)

    local ftlBranch

@@ -2304,7 +2278,7 @@ FTLcheckUpdate() {
    local localSha1

    # if dnsmasq exists and is running at this point, force reinstall of FTL Binary
-    if is_command dnsmasq; then
+    if which dnsmasq &> /dev/null; then
        if check_service_active "dnsmasq";then
            return 0
        fi
@@ -2325,7 +2299,7 @@ FTLcheckUpdate() {
            # We already have a pihole-FTL binary downloaded.
            # Alt branches don't have a tagged version against them, so just confirm the checksum of the local vs remote to decide whether we download or not
            remoteSha1=$(curl -sSL --fail "https://ftl.pi-hole.net/${ftlBranch}/${binary}.sha1" | cut -d ' ' -f 1)
-            localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
+            localSha1=$(sha1sum "$(which pihole-FTL)" | cut -d ' ' -f 1)

            if [[ "${remoteSha1}" != "${localSha1}" ]]; then
                printf "  %b Checksums do not match, downloading from ftl.pi-hole.net.\\n" "${INFO}"
@@ -2355,7 +2329,7 @@ FTLcheckUpdate() {
                printf "  %b Latest FTL Binary already installed (%s). Confirming Checksum...\\n" "${INFO}" "${FTLlatesttag}"

                remoteSha1=$(curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${FTLversion%$'\r'}/${binary}.sha1" | cut -d ' ' -f 1)
-                localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
+                localSha1=$(sha1sum "$(which pihole-FTL)" | cut -d ' ' -f 1)

                if [[ "${remoteSha1}" != "${localSha1}" ]]; then
                    printf "  %b Corruption detected...\\n" "${INFO}"
@@ -2465,7 +2439,7 @@ main() {

    #In case of RPM based distro, select the proper PHP version
    if [[ "$PKG_MANAGER" == "yum" || "$PKG_MANAGER" == "dnf" ]] ; then
-        select_rpm_php
+      select_rpm_php
    fi

    # Check if SELinux is Enforcing
@@ -2495,12 +2469,12 @@ main() {
        get_available_interfaces
        # Find interfaces and let the user choose one
        chooseInterface
-        # find IPv4 and IPv6 information of the device
-        collect_v4andv6_information
        # Decide what upstream DNS Servers to use
        setDNS
        # Give the user a choice of blocklists to include in their install. Or not.
        chooseBlocklists
+        # find IPv4 and IPv6 information of the device
+        collect_v4andv6_information
        # Let the user decide if they want the web interface to be installed automatically
        setAdminFlag
        # Let the user decide if they want query logging enabled...
--- a/gravity.sh
+++ b/gravity.sh
@@ -73,24 +73,19 @@ if [[ -r "${piholeDir}/pihole.conf" ]]; then
  echo -e "  ${COL_LIGHT_RED}Ignoring overrides specified within pihole.conf! ${COL_NC}"
 fi

-# Generate new SQLite3 file from schema template
+# Generate new sqlite3 file from schema template
 generate_gravity_database() {
-  if ! pihole-FTL sqlite3 "${gravityDBfile}" < "${gravityDBschema}"; then
-    echo -e "   ${CROSS} Unable to create ${gravityDBfile}"
-    return 1
-  fi
-  chown pihole:pihole "${gravityDBfile}"
-  chmod g+w "${piholeDir}" "${gravityDBfile}"
+  sqlite3 "${1}" < "${gravityDBschema}"
 }

 # Copy data from old to new database file and swap them
 gravity_swap_databases() {
-  local str copyGravity oldAvail
+  local str copyGravity
  str="Building tree"
  echo -ne "  ${INFO} ${str}..."

  # The index is intentionally not UNIQUE as poor quality adlists may contain domains more than once
-  output=$( { pihole-FTL sqlite3 "${gravityTEMPfile}" "CREATE INDEX idx_gravity ON gravity (domain, adlist_id);"; } 2>&1 )
+  output=$( { sqlite3 "${gravityTEMPfile}" "CREATE INDEX idx_gravity ON gravity (domain, adlist_id);"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -102,6 +97,22 @@ gravity_swap_databases() {
  str="Swapping databases"
  echo -ne "  ${INFO} ${str}..."

+  # Gravity copying SQL script
+  copyGravity="$(cat "${gravityDBcopy}")"
+  if [[ "${gravityDBfile}" != "${gravityDBfile_default}" ]]; then
+    # Replace default gravity script location by custom location
+    copyGravity="${copyGravity//"${gravityDBfile_default}"/"${gravityDBfile}"}"
+  fi
+
+  output=$( { sqlite3 "${gravityTEMPfile}" <<< "${copyGravity}"; } 2>&1 )
+  status="$?"
+
+  if [[ "${status}" -ne 0 ]]; then
+    echo -e "\\n  ${CROSS} Unable to copy data from ${gravityDBfile} to ${gravityTEMPfile}\\n  ${output}"
+    return 1
+  fi
+  echo -e "${OVER}  ${TICK} ${str}"
+
  # Swap databases and remove or conditionally rename old database
  # Number of available blocks on disk
  availableBlocks=$(stat -f --format "%a" "${gravityDIR}")
@@ -109,24 +120,18 @@ gravity_swap_databases() {
  gravityBlocks=$(stat --format "%b" ${gravityDBfile})
  # Only keep the old database if available disk space is at least twice the size of the existing gravity.db.
  # Better be safe than sorry...
-  oldAvail=false
  if [ "${availableBlocks}" -gt "$((gravityBlocks * 2))" ] && [ -f "${gravityDBfile}" ]; then
-    oldAvail=true
+    echo -e "  ${TICK} The old database remains available."
    mv "${gravityDBfile}" "${gravityOLDfile}"
  else
    rm "${gravityDBfile}"
  fi
  mv "${gravityTEMPfile}" "${gravityDBfile}"
-  echo -e "${OVER}  ${TICK} ${str}"
-
-  if $oldAvail; then
-    echo -e "  ${TICK} The old database remains available."
-  fi
 }

 # Update timestamp when the gravity table was last updated successfully
 update_gravity_timestamp() {
-  output=$( { printf ".timeout 30000\\nINSERT OR REPLACE INTO info (property,value) values ('updated',cast(strftime('%%s', 'now') as int));" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nINSERT OR REPLACE INTO info (property,value) values ('updated',cast(strftime('%%s', 'now') as int));" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -167,7 +172,7 @@ database_table_from_file() {

  # Get MAX(id) from domainlist when INSERTing into this table
  if [[ "${table}" == "domainlist" ]]; then
-    rowid="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT MAX(id) FROM domainlist;")"
+    rowid="$(sqlite3 "${gravityDBfile}" "SELECT MAX(id) FROM domainlist;")"
    if [[ -z "$rowid" ]]; then
      rowid=0
    fi
@@ -197,7 +202,7 @@ database_table_from_file() {
  # Store domains in database table specified by ${table}
  # Use printf as .mode and .import need to be on separate lines
  # see https://unix.stackexchange.com/a/445615/83260
-  output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" %s\\n" "${tmpFile}" "${table}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" %s\\n" "${tmpFile}" "${table}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -208,7 +213,7 @@ database_table_from_file() {
  # Move source file to backup directory, create directory if not existing
  mkdir -p "${backup_path}"
  mv "${source}" "${backup_file}" 2> /dev/null || \
-    echo -e "  ${CROSS} Unable to backup ${source} to ${backup_path}"
+      echo -e "  ${CROSS} Unable to backup ${source} to ${backup_path}"

  # Delete tmpFile
  rm "${tmpFile}" > /dev/null 2>&1 || \
@@ -217,7 +222,7 @@ database_table_from_file() {

 # Update timestamp of last update of this list. We store this in the "old" database as all values in the new database will later be overwritten
 database_adlist_updated() {
-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET date_updated = (cast(strftime('%%s', 'now') as int)) WHERE id = %i;\\n" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET date_updated = (cast(strftime('%%s', 'now') as int)) WHERE id = %i;\\n" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -228,7 +233,7 @@ database_adlist_updated() {

 # Check if a column with name ${2} exists in gravity table with name ${1}
 gravity_column_exists() {
-  output=$( { printf ".timeout 30000\\nSELECT EXISTS(SELECT * FROM pragma_table_info('%s') WHERE name='%s');\\n" "${1}" "${2}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nSELECT EXISTS(SELECT * FROM pragma_table_info('%s') WHERE name='%s');\\n" "${1}" "${2}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  if [[ "${output}" == "1" ]]; then
    return 0 # Bash 0 is success
  fi
@@ -243,7 +248,7 @@ database_adlist_number() {
    return;
  fi

-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${num_source_lines}" "${num_invalid}" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET number = %i, invalid_domains = %i WHERE id = %i;\\n" "${num_lines}" "${num_invalid}" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -259,7 +264,7 @@ database_adlist_status() {
    return;
  fi

-  output=$( { printf ".timeout 30000\\nUPDATE adlist SET status = %i WHERE id = %i;\\n" "${2}" "${1}" | pihole-FTL sqlite3 "${gravityDBfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\nUPDATE adlist SET status = %i WHERE id = %i;\\n" "${2}" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -274,10 +279,7 @@ migrate_to_database() {
  if [ ! -e "${gravityDBfile}" ]; then
    # Create new database file - note that this will be created in version 1
    echo -e "  ${INFO} Creating new gravity database"
-    if ! generate_gravity_database; then
-      echo -e "   ${CROSS} Error creating new gravity database. Please contact support."
-      return 1
-    fi
+    generate_gravity_database "${gravityDBfile}"

    # Check if gravity database needs to be updated
    upgrade_gravityDB "${gravityDBfile}" "${piholeDir}"
@@ -376,9 +378,9 @@ gravity_DownloadBlocklists() {
  fi

  # Retrieve source URLs from gravity database
-  # We source only enabled adlists, SQLite3 stores boolean values as 0 (false) or 1 (true)
-  mapfile -t sources <<< "$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT address FROM vw_adlist;" 2> /dev/null)"
-  mapfile -t sourceIDs <<< "$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT id FROM vw_adlist;" 2> /dev/null)"
+  # We source only enabled adlists, sqlite3 stores boolean values as 0 (false) or 1 (true)
+  mapfile -t sources <<< "$(sqlite3 "${gravityDBfile}" "SELECT address FROM vw_adlist;" 2> /dev/null)"
+  mapfile -t sourceIDs <<< "$(sqlite3 "${gravityDBfile}" "SELECT id FROM vw_adlist;" 2> /dev/null)"

  # Parse source domains from $sources
  mapfile -t sourceDomains <<< "$(
@@ -392,12 +394,14 @@ gravity_DownloadBlocklists() {
  )"

  local str="Pulling blocklist source list into range"
-  echo -e "${OVER}  ${TICK} ${str}"

-  if [[ -z "${sources[*]}" ]] || [[ -z "${sourceDomains[*]}" ]]; then
+  if [[ -n "${sources[*]}" ]] && [[ -n "${sourceDomains[*]}" ]]; then
+    echo -e "${OVER}  ${TICK} ${str}"
+  else
+    echo -e "${OVER}  ${CROSS} ${str}"
    echo -e "  ${INFO} No source list found, or it is empty"
    echo ""
-    unset sources
+    return 1
  fi

  local url domain agent cmd_ext str target compression
@@ -407,7 +411,7 @@ gravity_DownloadBlocklists() {
  str="Preparing new gravity database"
  echo -ne "  ${INFO} ${str}..."
  rm "${gravityTEMPfile}" > /dev/null 2>&1
-  output=$( { pihole-FTL sqlite3 "${gravityTEMPfile}" < "${gravityDBschema}"; } 2>&1 )
+  output=$( { sqlite3 "${gravityTEMPfile}" < "${gravityDBschema}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -426,9 +430,9 @@ gravity_DownloadBlocklists() {
    compression="--compressed"
    echo -e "  ${INFO} Using libz compression\n"
  else
-    compression=""
-    echo -e "  ${INFO} Libz compression not available\n"
-  fi
+      compression=""
+      echo -e "  ${INFO} Libz compression not available\n"
+    fi
  # Loop through $sources and download each one
  for ((i = 0; i < "${#sources[@]}"; i++)); do
    url="${sources[$i]}"
@@ -458,35 +462,16 @@ gravity_DownloadBlocklists() {
    check_url="$( sed -re 's#([^:/]*://)?([^/]+)@#\1\2#' <<< "$url" )"

    if [[ "${check_url}" =~ ${regex} ]]; then
-      echo -e "  ${CROSS} Invalid Target"
+        echo -e "  ${CROSS} Invalid Target"
    else
-      gravity_DownloadBlocklistFromUrl "${url}" "${cmd_ext}" "${agent}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}"
+       gravity_DownloadBlocklistFromUrl "${url}" "${cmd_ext}" "${agent}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}"
    fi
    echo ""
  done

-  str="Creating new gravity databases"
-  echo -ne "  ${INFO} ${str}..."
-
-  # Gravity copying SQL script
-  copyGravity="$(cat "${gravityDBcopy}")"
-  if [[ "${gravityDBfile}" != "${gravityDBfile_default}" ]]; then
-    # Replace default gravity script location by custom location
-    copyGravity="${copyGravity//"${gravityDBfile_default}"/"${gravityDBfile}"}"
-  fi
-
-  output=$( { pihole-FTL sqlite3 "${gravityTEMPfile}" <<< "${copyGravity}"; } 2>&1 )
-  status="$?"
-
-  if [[ "${status}" -ne 0 ]]; then
-    echo -e "\\n  ${CROSS} Unable to copy data from ${gravityDBfile} to ${gravityTEMPfile}\\n  ${output}"
-    return 1
-  fi
-  echo -e "${OVER}  ${TICK} ${str}"
-
  str="Storing downloaded domains in new gravity database"
  echo -ne "  ${INFO} ${str}..."
-  output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" gravity\\n" "${target}" | pihole-FTL sqlite3 "${gravityTEMPfile}"; } 2>&1 )
+  output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" gravity\\n" "${target}" | sqlite3 "${gravityTEMPfile}"; } 2>&1 )
  status="$?"

  if [[ "${status}" -ne 0 ]]; then
@@ -518,9 +503,8 @@ gravity_DownloadBlocklists() {
  gravity_Blackbody=true
 }

-# num_target_lines does increase for every correctly added domain in pareseList()
-num_target_lines=0
-num_source_lines=0
+total_num=0
+num_lines=0
 num_invalid=0
 parseList() {
  local adlistID="${1}" src="${2}" target="${3}" incorrect_lines
@@ -532,20 +516,18 @@ parseList() {
  # Find (up to) five domains containing invalid characters (see above)
  incorrect_lines="$(sed -e "/[^a-zA-Z0-9.\_-]/!d" "${src}" | head -n 5)"

-  local num_target_lines_new num_correct_lines
+  local num_target_lines num_correct_lines num_invalid
  # Get number of lines in source file
-  num_source_lines="$(grep -c "^" "${src}")"
-  # Get the new number of lines in destination file
-  num_target_lines_new="$(grep -c "^" "${target}")"
-  # Number of new correctly added lines
-  num_correct_lines="$(( num_target_lines_new-num_target_lines ))"
-  # Upate number of lines in target file
-  num_target_lines="$num_target_lines_new"
-  num_invalid="$(( num_source_lines-num_correct_lines ))"
+  num_lines="$(grep -c "^" "${src}")"
+  # Get number of lines in destination file
+  num_target_lines="$(grep -c "^" "${target}")"
+  num_correct_lines="$(( num_target_lines-total_num ))"
+  total_num="$num_target_lines"
+  num_invalid="$(( num_lines-num_correct_lines ))"
  if [[ "${num_invalid}" -eq 0 ]]; then
-    echo "  ${INFO} Analyzed ${num_source_lines} domains"
+    echo "  ${INFO} Analyzed ${num_lines} domains"
  else
-    echo "  ${INFO} Analyzed ${num_source_lines} domains, ${num_invalid} domains invalid!"
+    echo "  ${INFO} Analyzed ${num_lines} domains, ${num_invalid} domains invalid!"
  fi

  # Display sample of invalid lines if we found some
@@ -601,32 +583,28 @@ gravity_DownloadBlocklistFromUrl() {
  blocked=false
  case $BLOCKINGMODE in
    "IP-NODATA-AAAA"|"IP")
-      # Get IP address of this domain
-      ip="$(dig "${domain}" +short)"
-      # Check if this IP matches any IP of the system
-      if [[ -n "${ip}" && $(grep -Ec "inet(|6) ${ip}" <<< "$(ip a)") -gt 0 ]]; then
-        blocked=true
-      fi;;
+        # Get IP address of this domain
+        ip="$(dig "${domain}" +short)"
+        # Check if this IP matches any IP of the system
+        if [[ -n "${ip}" && $(grep -Ec "inet(|6) ${ip}" <<< "$(ip a)") -gt 0 ]]; then
+          blocked=true
+        fi;;
    "NXDOMAIN")
-      if [[ $(dig "${domain}" | grep "NXDOMAIN" -c) -ge 1 ]]; then
-        blocked=true
-      fi;;
-    "NODATA")
-      if [[ $(dig "${domain}" | grep "NOERROR" -c) -ge 1 ]] && [[ -z $(dig +short "${domain}") ]]; then
-         blocked=true
-      fi;;
+        if [[ $(dig "${domain}" | grep "NXDOMAIN" -c) -ge 1 ]]; then
+          blocked=true
+        fi;;
    "NULL"|*)
-      if [[ $(dig "${domain}" +short | grep "0.0.0.0" -c) -ge 1 ]]; then
-        blocked=true
-      fi;;
-  esac
+        if [[ $(dig "${domain}" +short | grep "0.0.0.0" -c) -ge 1 ]]; then
+          blocked=true
+        fi;;
+   esac

  if [[ "${blocked}" == true ]]; then
    printf -v ip_addr "%s" "${PIHOLE_DNS_1%#*}"
    if [[ ${PIHOLE_DNS_1} != *"#"* ]]; then
-      port=53
+        port=53
    else
-      printf -v port "%s" "${PIHOLE_DNS_1#*#}"
+        printf -v port "%s" "${PIHOLE_DNS_1#*#}"
    fi
    ip=$(dig "@${ip_addr}" -p "${port}" +short "${domain}" | tail -1)
    if [[ $(echo "${url}" | awk -F '://' '{print $1}') = "https" ]]; then
@@ -645,11 +623,11 @@ gravity_DownloadBlocklistFromUrl() {
  case $url in
    # Did we "download" a local file?
    "file"*)
-      if [[ -s "${patternBuffer}" ]]; then
-        echo -e "${OVER}  ${TICK} ${str} Retrieval successful"; success=true
-      else
-        echo -e "${OVER}  ${CROSS} ${str} Not found / empty list"
-      fi;;
+        if [[ -s "${patternBuffer}" ]]; then
+          echo -e "${OVER}  ${TICK} ${str} Retrieval successful"; success=true
+        else
+          echo -e "${OVER}  ${CROSS} ${str} Not found / empty list"
+        fi;;
    # Did we "download" a remote file?
    *)
      # Determine "Status:" output based on HTTP response
@@ -708,7 +686,7 @@ gravity_DownloadBlocklistFromUrl() {
    else
      echo -e "  ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}"
      # Manually reset these two numbers because we do not call parseList here
-      num_source_lines=0
+      num_lines=0
      num_invalid=0
      database_adlist_number "${adlistID}"
      database_adlist_status "${adlistID}" "4"
@@ -791,12 +769,12 @@ gravity_Table_Count() {
  local table="${1}"
  local str="${2}"
  local num
-  num="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM ${table};")"
+  num="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM ${table};")"
  if [[ "${table}" == "vw_gravity" ]]; then
    local unique
-    unique="$(pihole-FTL sqlite3 "${gravityDBfile}" "SELECT COUNT(DISTINCT domain) FROM ${table};")"
+    unique="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(DISTINCT domain) FROM ${table};")"
    echo -e "  ${INFO} Number of ${str}: ${num} (${COL_BOLD}${unique} unique domains${COL_NC})"
-    pihole-FTL sqlite3 "${gravityDBfile}" "INSERT OR REPLACE INTO info (property,value) VALUES ('gravity_count',${unique});"
+    sqlite3 "${gravityDBfile}" "INSERT OR REPLACE INTO info (property,value) VALUES ('gravity_count',${unique});"
  else
    echo -e "  ${INFO} Number of ${str}: ${num}"
  fi
@@ -867,49 +845,6 @@ gravity_Cleanup() {
  fi
 }

-database_recovery() {
-  local result
-  local str="Checking integrity of existing gravity database"
-  local option="${1}"
-  echo -ne "  ${INFO} ${str}..."
-  if result="$(pihole-FTL sqlite3 "${gravityDBfile}" "PRAGMA integrity_check" 2>&1)"; then
-    echo -e "${OVER}  ${TICK} ${str} - no errors found"
-
-    str="Checking foreign keys of existing gravity database"
-    echo -ne "  ${INFO} ${str}..."
-    if result="$(pihole-FTL sqlite3 "${gravityDBfile}" "PRAGMA foreign_key_check" 2>&1)"; then
-      echo -e "${OVER}  ${TICK} ${str} - no errors found"
-      if [[ "${option}" != "force" ]]; then
-        return
-      fi
-    else
-      echo -e "${OVER}  ${CROSS} ${str} - errors found:"
-      while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
-    fi
-  else
-    echo -e "${OVER}  ${CROSS} ${str} - errors found:"
-    while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
-  fi
-
-  str="Trying to recover existing gravity database"
-  echo -ne "  ${INFO} ${str}..."
-  # We have to remove any possibly existing recovery database or this will fail
-  rm -f "${gravityDBfile}.recovered" > /dev/null 2>&1
-  if result="$(pihole-FTL sqlite3 "${gravityDBfile}" ".recover" | pihole-FTL sqlite3 "${gravityDBfile}.recovered" 2>&1)"; then
-    echo -e "${OVER}  ${TICK} ${str} - success"
-    mv "${gravityDBfile}" "${gravityDBfile}.old"
-    mv "${gravityDBfile}.recovered" "${gravityDBfile}"
-    echo -ne " ${INFO} ${gravityDBfile} has been recovered"
-    echo -ne " ${INFO} The old ${gravityDBfile} has been moved to ${gravityDBfile}.old"
-  else
-    echo -e "${OVER}  ${CROSS} ${str} - the following errors happened:"
-    while IFS= read -r line ; do echo "  - $line"; done <<< "$result"
-    echo -e "  ${CROSS} Recovery failed. Try \"pihole -r recreate\" instead."
-    exit 1
-  fi
-  echo ""
-}
-
 helpFunc() {
  echo "Usage: pihole -g
 Update domains from blocklists specified in adlists.list
@@ -920,37 +855,10 @@ Options:
  exit 0
 }

-repairSelector() {
-  case "$1" in
-    "recover") recover_database=true;;
-    "recreate") recreate_database=true;;
-    *) echo "Usage: pihole -g -r {recover,recreate}
-Attempt to repair gravity database
-
-Available options:
-  pihole -g -r recover        Try to recover a damaged gravity database file.
-                              Pi-hole tries to restore as much as possible
-                              from a corrupted gravity database.
-
-  pihole -g -r recover force  Pi-hole will run the recovery process even when
-                              no damage is detected. This option is meant to be
-                              a last resort. Recovery is a fragile task
-                              consuming a lot of resources and shouldn't be
-                              performed unnecessarily.
-
-  pihole -g -r recreate       Create a new gravity database file from scratch.
-                              This will remove your existing gravity database
-                              and create a new file from scratch. If you still
-                              have the migration backup created when migrating
-                              to Pi-hole v5.0, Pi-hole will import these files."
-    exit 0;;
-  esac
-}
-
 for var in "$@"; do
  case "${var}" in
    "-f" | "--force" ) forceDelete=true;;
-    "-r" | "--repair" ) repairSelector "$3";;
+    "-r" | "--recreate" ) recreate_database=true;;
    "-h" | "--help" ) helpFunc;;
  esac
 done
@@ -964,7 +872,7 @@ fi
 gravity_Trap

 if [[ "${recreate_database:-}" == true ]]; then
-  str="Recreating gravity database from migration backup"
+  str="Restoring from migration backup"
  echo -ne "${INFO} ${str}..."
  rm "${gravityDBfile}"
  pushd "${piholeDir}" > /dev/null || exit
@@ -973,15 +881,8 @@ if [[ "${recreate_database:-}" == true ]]; then
  echo -e "${OVER}  ${TICK} ${str}"
 fi

-if [[ "${recover_database:-}" == true ]]; then
-  database_recovery "$4"
-fi
-
 # Move possibly existing legacy files to the gravity database
-if ! migrate_to_database; then
-  echo -e "   ${CROSS} Unable to migrate to database. Please contact support."
-  exit 1
-fi
+migrate_to_database

 if [[ "${forceDelete:-}" == true ]]; then
  str="Deleting existing list cache"
@@ -992,21 +893,14 @@ if [[ "${forceDelete:-}" == true ]]; then
 fi

 # Gravity downloads blocklists next
-if ! gravity_CheckDNSResolutionAvailable; then
-  echo -e "   ${CROSS} Can not complete gravity update, no DNS is available. Please contact support."
-  exit 1
-fi
-
+gravity_CheckDNSResolutionAvailable
 gravity_DownloadBlocklists

 # Create local.list
 gravity_generateLocalList

 # Migrate rest of the data from old to new database
-if ! gravity_swap_databases; then
-  echo -e "   ${CROSS} Unable to create database. Please contact support."
-  exit 1
-fi
+gravity_swap_databases

 # Update gravity timestamp
 update_gravity_timestamp
--- a/manpages/pihole-FTL.8
+++ b/manpages/pihole-FTL.8
@@ -144,9 +144,7 @@ Command line arguments can be arbitrarily combined, e.g:
 Start ftl in foreground with more verbose logging, process everything and shutdown immediately
 .br
 .SH "SEE ALSO"
-\fBpihole\fR(8)
-.br
-\fBFor FTL's config options please see https://docs.pi-hole.net/ftldns/configfile/\fR
+\fBpihole\fR(8), \fBpihole-FTL.conf\fR(5)
 .br
 .SH "COLOPHON"

--- a/manpages/pihole-FTL.conf.5
+++ b/manpages/pihole-FTL.conf.5
@@ -0,0 +1,313 @@
+.TH "pihole-FTL.conf" "5" "pihole-FTL.conf" "pihole-FTL.conf" "November 2020"
+.SH "NAME"
+
+pihole-FTL.conf - FTL's config file
+.br
+.SH "DESCRIPTION"
+
+/etc/pihole/pihole-FTL.conf will be read by \fBpihole-FTL(8)\fR on startup.
+.br
+For each setting the option shown first is the default.
+.br
+
+\fBBLOCKINGMODE=IP|IP-AAAA-NODATA|NODATA|NXDOMAIN|NULL\fR
+.br
+    How should FTL reply to blocked queries?
+
+    IP             - Pi-hole's IPs for blocked domains
+
+    IP-AAAA-NODATA - Pi-hole's IP + NODATA-IPv6 for blocked domains
+
+    NODATA         - Using NODATA for blocked domains
+
+    NXDOMAIN       - NXDOMAIN for blocked domains
+
+    NULL           - Null IPs for blocked domains
+.br
+
+\fBCNAME_DEEP_INSPECT=true|false\fR
+.br
+    Use this option to disable deep CNAME inspection. This might be beneficial for very low-end devices.
+.br
+
+\fBBLOCK_ESNI=true|false\fR
+.br
+    Block requests to _esni.* sub-domains.
+.br
+
+\fBMAXLOGAGE=24.0\fR
+.br
+    Up to how many hours of queries should be imported from the database and logs?
+.br
+    Maximum is 744 (31 days)
+.br
+
+\fBPRIVACYLEVEL=0|1|2|3|4\fR
+.br
+    Privacy level used to collect Pi-hole statistics.
+.br
+    0 - show everything
+.br
+    1 - hide domains
+.br
+    2 - hide domains and clients
+.br
+    3 - anonymous mode (hide everything)
+.br
+    4 - disable all statistics
+.br
+
+\fBIGNORE_LOCALHOST=no|yes\fR
+.br
+    Should FTL ignore queries coming from the local machine?
+.br
+
+\fBAAAA_QUERY_ANALYSIS=yes|no\fR
+.br
+    Should FTL analyze AAAA queries?
+.br
+
+\fBANALYZE_ONLY_A_AND_AAAA=false|true\fR
+.br
+    Should FTL only analyze A and AAAA queries?
+.br
+
+\fBSOCKET_LISTENING=localonly|all\fR
+.br
+    Listen only for local socket connections on the API port or permit all connections.
+.br
+
+\fBFTLPORT=4711\fR
+.br
+    On which port should FTL be listening?
+.br
+
+\fBRESOLVE_IPV6=yes|no\fR
+.br
+    Should FTL try to resolve IPv6 addresses to hostnames?
+.br
+
+\fBRESOLVE_IPV4=yes|no\fR
+.br
+    Should FTL try to resolve IPv4 addresses to hostnames?
+.br
+
+\fBDELAY_STARTUP=0\fR
+.br
+    Time in seconds (between 0 and 300) to delay FTL startup.
+.br
+
+\fBNICE=-10\fR
+.br
+    Set the niceness of the Pi-hole FTL process.
+.br
+    Can be disabled altogether by setting a value of -999.
+.br
+
+\fBNAMES_FROM_NETDB=true|false\fR
+.br
+    Control whether FTL should use a fallback option and try to obtain client names from checking the network table.
+.br
+    E.g. IPv6 clients without a hostname will be compared via MAC address to known clients.
+.br
+
+\fB\fBREFRESH_HOSTNAMES=IPV4|ALL|NONE\fR
+.br
+    Change how (and if) hourly PTR requests are made to check for changes in client and upstream server hostnames:
+.br
+    IPV4 - Do the hourly PTR lookups only for IPv4 addresses resolving issues in networks with many short-lived PE IPv6 addresses.
+.br
+    ALL  - Do the hourly PTR lookups for all addresses. This can create a lot of PTR queries in networks with many IPv6 addresses.
+.br
+    NONE - Don't do hourly PTR lookups. Look up hostnames once (when first seeing a client) and never again. Future hostname changes may be missed.
+.br
+
+\fBMAXNETAGE=365\fR
+.br
+    IP addresses (and associated host names) older than the specified number of days are removed.
+.br
+    This avoids dead entries in the network overview table.
+.br
+
+\fBEDNS0_ECS=true|false\fR
+.br
+    Should we overwrite the query source when client information is provided through EDNS0 client subnet (ECS) information?
+.br
+
+\fBPARSE_ARP_CACHE=true|false\fR
+.br
+    Parse ARP cache to fill network overview table.
+.br
+
+\fBDBIMPORT=yes|no\fR
+.br
+    Should FTL load information from the database on startup to be aware of the most recent history?
+.br
+
+\fBMAXDBDAYS=365\fR
+.br
+    How long should queries be stored in the database? Setting this to 0 disables the database
+.br
+
+\fBDBINTERVAL=1.0\fR
+.br
+    How often do we store queries in FTL's database [minutes]?
+.br
+    Accepts value between 0.1 (6 sec) and 1440 (1 day)
+.br
+
+\fBDBFILE=/etc/pihole/pihole-FTL.db\fR
+.br
+    Specify path and filename of FTL's SQLite long-term database.
+.br
+    Setting this to DBFILE= disables the database altogether
+.br
+
+\fBLOGFILE=/var/log/pihole-FTL.log\fR
+.br
+    The location of FTL's log file.
+.br
+
+\fBPIDFILE=/run/pihole-FTL.pid\fR
+.br
+    The file which contains the PID of FTL's main process.
+.br
+
+\fBPORTFILE=/run/pihole-FTL.port\fR
+.br
+    Specify path and filename where the FTL process will write its API port number.
+.br
+
+\fBSOCKETFILE=/run/pihole/FTL.sock\fR
+.br
+    The file containing the socket FTL's API is listening on.
+.br
+
+\fBSETUPVARSFILE=/etc/pihole/setupVars.conf\fR
+.br
+    The config file of Pi-hole containing, e.g., the current blocking status (do not change).
+.br
+
+\fBMACVENDORDB=/etc/pihole/macvendor.db\fR
+.br
+    The database containing MAC -> Vendor information for the network table.
+.br
+
+\fBGRAVITYDB=/etc/pihole/gravity.db\fR
+.br
+    Specify path and filename of FTL's SQLite3 gravity database. This database contains all domains relevant for Pi-hole's DNS blocking.
+.br
+
+\fBDEBUG_ALL=false|true\fR
+.br
+    Enable all debug flags. If this is set to true, all other debug config options are ignored.
+.br
+
+\fBDEBUG_DATABASE=false|true\fR
+.br
+    Print debugging information about database actions such as SQL statements and performance.
+.br
+
+\fBDEBUG_NETWORKING=false|true\fR
+.br
+    Prints a list of the detected network interfaces on the startup of FTL.
+.br
+
+\fBDEBUG_LOCKS=false|true\fR
+.br
+    Print information about shared memory locks.
+.br
+    Messages will be generated when waiting, obtaining, and releasing a lock.
+.br
+
+\fBDEBUG_QUERIES=false|true\fR
+.br
+    Print extensive DNS query information (domains, types, replies, etc.).
+.br
+
+\fBDEBUG_FLAGS=false|true\fR
+.br
+    Print flags of queries received by the DNS hooks.
+.br
+    Only effective when \fBDEBUG_QUERIES\fR is enabled as well.
+
+\fBDEBUG_SHMEM=false|true\fR
+.br
+    Print information about shared memory buffers.
+.br
+    Messages are either about creating or enlarging shmem objects or string injections.
+.br
+
+\fBDEBUG_GC=false|true\fR
+.br
+    Print information about garbage collection (GC):
+.br
+    What is to be removed, how many have been removed and how long did GC take.
+.br
+
+\fBDEBUG_ARP=false|true\fR
+.br
+    Print information about ARP table processing:
+.br
+    How long did parsing take, whether read MAC addresses are valid, and if the macvendor.db file exists.
+.br
+
+\fBDEBUG_REGEX=false|true\fR
+.br
+    Controls if FTL should print extended details about regex matching.
+.br
+
+\fBDEBUG_API=false|true\fR
+.br
+    Print extra debugging information during telnet API calls.
+.br
+    Currently only used to send extra information when getting all queries.
+.br
+
+\fBDEBUG_OVERTIME=false|true\fR
+.br
+    Print information about overTime memory operations, such as initializing or moving overTime slots.
+.br
+
+\fBDEBUG_EXTBLOCKED=false|true\fR
+.br
+    Print information about why FTL decided that certain queries were recognized as being externally blocked.
+.br
+
+\fBDEBUG_CAPS=false|true\fR
+.br
+    Print information about POSIX capabilities granted to the FTL process.
+.br
+    The current capabilities are printed on receipt of SIGHUP i.e. after executing `killall -HUP pihole-FTL`.
+.br
+
+\fBDEBUG_DNSMASQ_LINES=false|true\fR
+.br
+    Print file and line causing a dnsmasq event into FTL's log files.
+.br
+    This is handy to implement additional hooks missing from FTL.
+.br
+
+\fBDEBUG_VECTORS=false|true\fR
+.br
+    FTL uses dynamically allocated vectors for various tasks.
+.br
+    This config option enables extensive debugging information such as information about allocation, referencing, deletion, and appending.
+.br
+
+\fBDEBUG_RESOLVER=false|true\fR
+.br
+    Extensive information about hostname resolution like which DNS servers are used in the first and second hostname resolving tries.
+.br
+
+.SH "SEE ALSO"
+
+\fBpihole\fR(8), \fBpihole-FTL\fR(8)
+.br
+.SH "COLOPHON"
+
+Pi-hole : The Faster-Than-Light (FTL) Engine is a lightweight, purpose-built daemon used to provide statistics needed for the Pi-hole Web Interface, and its API can be easily integrated into your own projects. Although it is an optional component of the Pi-hole ecosystem, it will be installed by default to provide statistics. As the name implies, FTL does its work \fIvery quickly\fR!
+.br
+
+Get sucked into the latest news and community activity by entering Pi-hole's orbit. Information about Pi-hole, and the latest version of the software can be found at https://pi-hole.net
+.br
--- a/66
+++ b/66
@@ -21,9 +21,6 @@ readonly FTL_PID_FILE="/run/pihole-FTL.pid"
 readonly colfile="${PI_HOLE_SCRIPT_DIR}/COL_TABLE"
 source "${colfile}"

-readonly utilsfile="${PI_HOLE_SCRIPT_DIR}/utils.sh"
-source "${utilsfile}"
-
 webpageFunc() {
  source "${PI_HOLE_SCRIPT_DIR}/webpage.sh"
  main "$@"
@@ -74,7 +71,8 @@ reconfigurePiholeFunc() {
 }

 updateGravityFunc() {
-  exec "${PI_HOLE_SCRIPT_DIR}"/gravity.sh "$@"
+  "${PI_HOLE_SCRIPT_DIR}"/gravity.sh "$@"
+  exit $?
 }

 queryFunc() {
@@ -97,7 +95,8 @@ uninstallFunc() {

 versionFunc() {
  shift
-  exec "${PI_HOLE_SCRIPT_DIR}"/version.sh "$@"
+  "${PI_HOLE_SCRIPT_DIR}"/version.sh "$@"
+  exit 0
 }

 # Get PID of main pihole-FTL process
@@ -226,7 +225,8 @@ Time:
      fi

      local str="Pi-hole Disabled"
-      addOrEditKeyValPair "BLOCKING_ENABLED" "false" "${setupVars}"
+      sed -i "/BLOCKING_ENABLED=/d" "${setupVars}"
+      echo "BLOCKING_ENABLED=false" >> "${setupVars}"
    fi
  else
    # Enable Pi-hole
@@ -238,7 +238,8 @@ Time:
    echo -e "  ${INFO} Enabling blocking"
    local str="Pi-hole Enabled"

-    addOrEditKeyValPair "BLOCKING_ENABLED" "true" "${setupVars}"
+    sed -i "/BLOCKING_ENABLED=/d" "${setupVars}"
+    echo "BLOCKING_ENABLED=true" >> "${setupVars}"
  fi

  restartDNS reload-lists
@@ -261,7 +262,7 @@ Options:
  elif [[ "${1}" == "off" ]]; then
    # Disable logging
    sed -i 's/^log-queries/#log-queries/' /etc/dnsmasq.d/01-pihole.conf
-    addOrEditKeyValPair "QUERY_LOGGING" "false" "${setupVars}"
+    sed -i 's/^QUERY_LOGGING=true/QUERY_LOGGING=false/' /etc/pihole/setupVars.conf
    if [[ "${2}" != "noflush" ]]; then
      # Flush logs
      "${PI_HOLE_BIN_DIR}"/pihole -f
@@ -271,7 +272,7 @@ Options:
  elif [[ "${1}" == "on" ]]; then
    # Enable logging
    sed -i 's/^#log-queries/log-queries/' /etc/dnsmasq.d/01-pihole.conf
-    addOrEditKeyValPair "QUERY_LOGGING" "true" "${setupVars}"
+    sed -i 's/^QUERY_LOGGING=false/QUERY_LOGGING=true/' /etc/pihole/setupVars.conf
    echo -e "  ${INFO} Enabling logging..."
    local str="Logging has been enabled!"
  else
@@ -284,29 +285,27 @@ Options:
 }

 analyze_ports() {
-  local lv4 lv6 port=${1}
  # FTL is listening at least on at least one port when this
  # function is getting called
+  echo -e "  ${TICK} DNS service is listening"
  # Check individual address family/protocol combinations
  # For a healthy Pi-hole, they should all be up (nothing printed)
-  lv4="$(ss --ipv4 --listening --numeric --tcp --udp src :${port})"
-  if grep -q "udp " <<< "${lv4}"; then
+  if grep -q "IPv4.*UDP" <<< "${1}"; then
      echo -e "     ${TICK} UDP (IPv4)"
  else
      echo -e "     ${CROSS} UDP (IPv4)"
  fi
-  if grep -q "tcp " <<< "${lv4}"; then
+  if grep -q "IPv4.*TCP" <<< "${1}"; then
      echo -e "     ${TICK} TCP (IPv4)"
  else
      echo -e "     ${CROSS} TCP (IPv4)"
  fi
-  lv6="$(ss --ipv6 --listening --numeric --tcp --udp src :${port})"
-  if grep -q "udp " <<< "${lv6}"; then
+  if grep -q "IPv6.*UDP" <<< "${1}"; then
      echo -e "     ${TICK} UDP (IPv6)"
  else
      echo -e "     ${CROSS} UDP (IPv6)"
  fi
-  if grep -q "tcp " <<< "${lv6}"; then
+  if grep -q "IPv6.*TCP" <<< "${1}"; then
      echo -e "     ${TICK} TCP (IPv6)"
  else
      echo -e "     ${CROSS} TCP (IPv6)"
@@ -315,31 +314,19 @@ analyze_ports() {
 }

 statusFunc() {
-  # Determine if there is pihole-FTL service is listening
-  local listening pid port
-
-  pid="$(getFTLPID)"
-  if [[ "$pid" -eq "-1" ]]; then
+  # Determine if there is a pihole service is listening on port 53
+  local listening
+  listening="$(lsof -Pni:53)"
+  if grep -q "pihole" <<< "${listening}"; then
+    if [[ "${1}" != "web" ]]; then
+      analyze_ports "${listening}"
+    fi
+  else
    case "${1}" in
      "web") echo "-1";;
-      *) echo -e "  ${CROSS} DNS service is NOT running";;
+      *) echo -e "  ${CROSS} DNS service is NOT listening";;
    esac
    return 0
-  else
-    #get the port pihole-FTL is listening on by using FTL's telnet API
-    port="$(echo ">dns-port >quit" | nc 127.0.0.1 4711)"
-    if [[ "${port}" == "0" ]]; then
-      case "${1}" in
-        "web") echo "-1";;
-        *) echo -e "  ${CROSS} DNS service is NOT listening";;
-      esac
-      return 0
-    else
-      if [[ "${1}" != "web" ]]; then
-        echo -e "  ${TICK} FTL is listening on port ${port}"
-        analyze_ports "${port}"
-      fi
-    fi
  fi

  # Determine if Pi-hole's blocking is enabled
@@ -352,19 +339,18 @@ statusFunc() {
  elif grep -q "BLOCKING_ENABLED=true" /etc/pihole/setupVars.conf;  then
    # Configs are set
    case "${1}" in
-      "web") echo "$port";;
+      "web") echo 1;;
      *) echo -e "  ${TICK} Pi-hole blocking is enabled";;
    esac
  else
    # No configs were found
    case "${1}" in
-      "web") echo -2;;
+      "web") echo 99;;
      *) echo -e "  ${INFO} Pi-hole blocking will be enabled";;
    esac
    # Enable blocking
    "${PI_HOLE_BIN_DIR}"/pihole enable
  fi
-
 }

 tailFunc() {
--- a/test/README.md
+++ b/test/README.md
@@ -18,8 +18,8 @@ py.test -vv -n auto -m "build_stage"
 py.test -vv -n auto -m "not build_stage"
 ```

-The build_stage tests have to run first to create the docker images, followed by the actual tests which utilize said images. Unless you're changing your dockerfiles you shouldn't have to run the build_stage every time - but it's a good idea to rebuild at least once a day in case the base Docker images or packages change.
+The build_stage tests have to run first to create the docker images, followed by the actual tests which utilize said images.  Unless you're changing your dockerfiles you shouldn't have to run the build_stage every time - but it's a good idea to rebuild at least once a day in case the base Docker images or packages change.

 # How do I debug python?

-Highly recommended: Setup PyCharm on a **Docker enabled** machine. Having a python debugger like PyCharm changes your life if you've never used it :)
+Highly recommended: Setup PyCharm on a **Docker enabled** machine.  Having a python debugger like PyCharm changes your life if you've never used it :)
--- a/test/_centos_7.Dockerfile
+++ b/test/_centos_7.Dockerfile
@@ -1,5 +1,4 @@
 FROM centos:7
-RUN yum install -y git

 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
--- a/test/_centos_8.Dockerfile
+++ b/test/_centos_8.Dockerfile
@@ -1,5 +1,4 @@
-FROM quay.io/centos/centos:stream8
-RUN yum install -y git
+FROM centos:8

 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
--- a/test/_fedora_33.Dockerfile
+++ b/test/_fedora_33.Dockerfile
@@ -1,5 +1,4 @@
 FROM fedora:33
-RUN dnf install -y git

 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
--- a/test/_fedora_34.Dockerfile
+++ b/test/_fedora_34.Dockerfile
@@ -1,5 +1,4 @@
 FROM fedora:34
-RUN dnf install -y git

 ENV GITDIR /etc/.pihole
 ENV SCRIPTDIR /opt/pihole
--- a/test/conftest.py
+++ b/test/conftest.py
@@ -1,9 +1,10 @@
 import pytest
 import testinfra
-import testinfra.backend.docker
-import subprocess
 from textwrap import dedent

+check_output = testinfra.get_backend(
+    "local://"
+).get_module("Command").check_output

 SETUPVARS = {
    'PIHOLE_INTERFACE': 'eth99',
@@ -11,42 +12,85 @@ SETUPVARS = {
    'PIHOLE_DNS_2': '4.2.2.2'
 }

-IMAGE = 'pytest_pihole:test_container'
-
 tick_box = "[\x1b[1;32m\u2713\x1b[0m]"
 cross_box = "[\x1b[1;31m\u2717\x1b[0m]"
 info_box = "[i]"


-# Monkeypatch sh to bash, if they ever support non hard code /bin/sh this can go away
-# https://github.com/pytest-dev/pytest-testinfra/blob/master/testinfra/backend/docker.py
-def run_bash(self, command, *args, **kwargs):
-    cmd = self.get_command(command, *args)
-    if self.user is not None:
-        out = self.run_local(
-            "docker exec -u %s %s /bin/bash -c %s", self.user, self.name, cmd
-        )
-    else:
-        out = self.run_local("docker exec %s /bin/bash -c %s", self.name, cmd)
-    out.command = self.encode(cmd)
-    return out
+@pytest.fixture
+def Pihole(Docker):
+    '''
+    used to contain some script stubbing, now pretty much an alias.
+    Also provides bash as the default run function shell
+    '''
+    def run_bash(self, command, *args, **kwargs):
+        cmd = self.get_command(command, *args)
+        if self.user is not None:
+            out = self.run_local(
+                "docker exec -u %s %s /bin/bash -c %s",
+                self.user, self.name, cmd)
+        else:
+            out = self.run_local(
+                "docker exec %s /bin/bash -c %s", self.name, cmd)
+        out.command = self.encode(cmd)
+        return out

-
-testinfra.backend.docker.DockerBackend.run = run_bash
+    funcType = type(Docker.run)
+    Docker.run = funcType(run_bash, Docker)
+    return Docker


@pytest.fixture
-def host():
-    # run a container
-    docker_id = subprocess.check_output(
-        ['docker', 'run', '-t', '-d', '--cap-add=ALL', IMAGE]).decode().strip()
+def Docker(request, args, image, cmd):
+    '''
+    combine our fixtures into a docker run command and setup finalizer to
+    cleanup
+    '''
+    assert 'docker' in check_output('id'), "Are you in the docker group?"
+    docker_run = "docker run {} {} {}".format(args, image, cmd)
+    docker_id = check_output(docker_run)

-    # return a testinfra connection to the container
-    docker_host = testinfra.get_host("docker://" + docker_id)
+    def teardown():
+        check_output("docker rm -f %s", docker_id)
+    request.addfinalizer(teardown)

-    yield docker_host
-    # at the end of the test suite, destroy the container
-    subprocess.check_call(['docker', 'rm', '-f', docker_id])
+    docker_container = testinfra.get_backend("docker://" + docker_id)
+    docker_container.id = docker_id
+    return docker_container
+
+
+@pytest.fixture
+def args(request):
+    '''
+    -t became required when tput began being used
+    '''
+    return '-t -d'
+
+
+@pytest.fixture(params=[
+    'test_container'
+])
+def tag(request):
+    '''
+    consumed by image to make the test matrix
+    '''
+    return request.param
+
+
+@pytest.fixture()
+def image(request, tag):
+    '''
+    built by test_000_build_containers.py
+    '''
+    return 'pytest_pihole:{}'.format(tag)
+
+
+@pytest.fixture()
+def cmd(request):
+    '''
+    default to doing nothing by tailing null, but don't exit
+    '''
+    return 'tail -f /dev/null'


 # Helper functions
@@ -56,7 +100,7 @@ def mock_command(script, args, container):
    in unit tests
    '''
    full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent(r'''\
+    mock_script = dedent('''\
    #!/bin/bash -e
    echo "\$0 \$@" >> /var/log/{script}
    case "\$1" in'''.format(script=script))
@@ -77,75 +121,13 @@ def mock_command(script, args, container):
                                         scriptlog=script))


-def mock_command_passthrough(script, args, container):
-    '''
-    Per other mock_command* functions, allows intercepting of commands we don't want to run for real
-    in unit tests, however also allows only specific arguments to be mocked. Anything not defined will
-    be passed through to the actual command.
-
-    Example use-case: mocking `git pull` but still allowing `git clone` to work as intended
-    '''
-    orig_script_path = container.check_output('command -v {}'.format(script))
-    full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent(r'''\
-    #!/bin/bash -e
-    echo "\$0 \$@" >> /var/log/{script}
-    case "\$1" in'''.format(script=script))
-    for k, v in args.items():
-        case = dedent('''
-        {arg})
-        echo {res}
-        exit {retcode}
-        ;;'''.format(arg=k, res=v[0], retcode=v[1]))
-        mock_script += case
-    mock_script += dedent(r'''
-    *)
-    {orig_script_path} "\$@"
-    ;;'''.format(orig_script_path=orig_script_path))
-    mock_script += dedent('''
-    esac''')
-    container.run('''
-    cat <<EOF> {script}\n{content}\nEOF
-    chmod +x {script}
-    rm -f /var/log/{scriptlog}'''.format(script=full_script_path,
-                                         content=mock_script,
-                                         scriptlog=script))
-
-
-def mock_command_run(script, args, container):
-    '''
-    Allows for setup of commands we don't really want to have to run for real
-    in unit tests
-    '''
-    full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent(r'''\
-    #!/bin/bash -e
-    echo "\$0 \$@" >> /var/log/{script}
-    case "\$1 \$2" in'''.format(script=script))
-    for k, v in args.items():
-        case = dedent('''
-        \"{arg}\")
-        echo {res}
-        exit {retcode}
-        ;;'''.format(arg=k, res=v[0], retcode=v[1]))
-        mock_script += case
-    mock_script += dedent('''
-    esac''')
-    container.run('''
-    cat <<EOF> {script}\n{content}\nEOF
-    chmod +x {script}
-    rm -f /var/log/{scriptlog}'''.format(script=full_script_path,
-                                         content=mock_script,
-                                         scriptlog=script))
-
-
 def mock_command_2(script, args, container):
    '''
    Allows for setup of commands we don't really want to have to run for real
    in unit tests
    '''
    full_script_path = '/usr/local/bin/{}'.format(script)
-    mock_script = dedent(r'''\
+    mock_script = dedent('''\
    #!/bin/bash -e
    echo "\$0 \$@" >> /var/log/{script}
    case "\$1 \$2" in'''.format(script=script))
--- a/test/requirements.txt
+++ b/test/requirements.txt
@@ -1,6 +1,6 @@
-docker-compose
-pytest
-pytest-xdist
-pytest-cov
-pytest-testinfra
-tox
+docker-compose==1.23.2
+pytest==4.3.0
+pytest-xdist==1.26.1
+pytest-cov==2.6.1
+testinfra==1.19.0
+tox==3.7.0
--- a/test/test_any_automated_install.py
+++ b/test/test_any_automated_install.py
--- a/test/test_any_utils.py
+++ b/test/test_any_utils.py
@@ -1,16 +0,0 @@
-def test_key_val_replacement_works(host):
-    ''' Confirms addOrEditKeyValPair provides the expected output '''
-    host.run('''
-    setupvars=./testoutput
-    source /opt/pihole/utils.sh
-    addOrEditKeyValPair "KEY_ONE" "value1" "./testoutput"
-    addOrEditKeyValPair "KEY_TWO" "value2" "./testoutput"
-    addOrEditKeyValPair "KEY_ONE" "value3" "./testoutput"
-    addOrEditKeyValPair "KEY_FOUR" "value4" "./testoutput"
-    cat ./testoutput
-    ''')
-    output = host.run('''
-    cat ./testoutput
-    ''')
-    expected_stdout = 'KEY_ONE=value3\nKEY_TWO=value2\nKEY_FOUR=value4\n'
-    assert expected_stdout == output.stdout
--- a/test/test_automated_install.py
+++ b/test/test_automated_install.py
@@ -0,0 +1,639 @@
+from textwrap import dedent
+import re
+from .conftest import (
+    SETUPVARS,
+    tick_box,
+    info_box,
+    cross_box,
+    mock_command,
+    mock_command_2,
+    run_script
+)
+
+
+def test_supported_package_manager(Pihole):
+    '''
+    confirm installer exits when no supported package manager found
+    '''
+    # break supported package managers
+    Pihole.run('rm -rf /usr/bin/apt-get')
+    Pihole.run('rm -rf /usr/bin/rpm')
+    package_manager_detect = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    ''')
+    expected_stdout = cross_box + ' No supported package manager found'
+    assert expected_stdout in package_manager_detect.stdout
+    # assert package_manager_detect.rc == 1
+
+
+def test_setupVars_are_sourced_to_global_scope(Pihole):
+    '''
+    currently update_dialogs sources setupVars with a dot,
+    then various other functions use the variables.
+    This confirms the sourced variables are in scope between functions
+    '''
+    setup_var_file = 'cat <<EOF> /etc/pihole/setupVars.conf\n'
+    for k, v in SETUPVARS.items():
+        setup_var_file += "{}={}\n".format(k, v)
+    setup_var_file += "EOF\n"
+    Pihole.run(setup_var_file)
+
+    script = dedent('''\
+    set -e
+    printSetupVars() {
+        # Currently debug test function only
+        echo "Outputting sourced variables"
+        echo "PIHOLE_INTERFACE=${PIHOLE_INTERFACE}"
+        echo "PIHOLE_DNS_1=${PIHOLE_DNS_1}"
+        echo "PIHOLE_DNS_2=${PIHOLE_DNS_2}"
+    }
+    update_dialogs() {
+        . /etc/pihole/setupVars.conf
+    }
+    update_dialogs
+    printSetupVars
+    ''')
+
+    output = run_script(Pihole, script).stdout
+
+    for k, v in SETUPVARS.items():
+        assert "{}={}".format(k, v) in output
+
+
+def test_setupVars_saved_to_file(Pihole):
+    '''
+    confirm saved settings are written to a file for future updates to re-use
+    '''
+    # dedent works better with this and padding matching script below
+    set_setup_vars = '\n'
+    for k, v in SETUPVARS.items():
+        set_setup_vars += "    {}={}\n".format(k, v)
+    Pihole.run(set_setup_vars).stdout
+
+    script = dedent('''\
+    set -e
+    echo start
+    TERM=xterm
+    source /opt/pihole/basic-install.sh
+    {}
+    mkdir -p /etc/dnsmasq.d
+    version_check_dnsmasq
+    echo "" > /etc/pihole/pihole-FTL.conf
+    finalExports
+    cat /etc/pihole/setupVars.conf
+    '''.format(set_setup_vars))
+
+    output = run_script(Pihole, script).stdout
+
+    for k, v in SETUPVARS.items():
+        assert "{}={}".format(k, v) in output
+
+
+def test_selinux_not_detected(Pihole):
+    '''
+    confirms installer continues when SELinux configuration file does not exist
+    '''
+    check_selinux = Pihole.run('''
+    rm -f /etc/selinux/config
+    source /opt/pihole/basic-install.sh
+    checkSelinux
+    ''')
+    expected_stdout = info_box + ' SELinux not detected'
+    assert expected_stdout in check_selinux.stdout
+    assert check_selinux.rc == 0
+
+
+def test_installPiholeWeb_fresh_install_no_errors(Pihole):
+    '''
+    confirms all web page assets from Core repo are installed on a fresh build
+    '''
+    installWeb = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    installPiholeWeb
+    ''')
+    expected_stdout = info_box + ' Installing blocking page...'
+    assert expected_stdout in installWeb.stdout
+    expected_stdout = tick_box + (' Creating directory for blocking page, '
+                                  'and copying files')
+    assert expected_stdout in installWeb.stdout
+    expected_stdout = info_box + ' Backing up index.lighttpd.html'
+    assert expected_stdout in installWeb.stdout
+    expected_stdout = ('No default index.lighttpd.html file found... '
+                       'not backing up')
+    assert expected_stdout in installWeb.stdout
+    expected_stdout = tick_box + ' Installing sudoer file'
+    assert expected_stdout in installWeb.stdout
+    web_directory = Pihole.run('ls -r /var/www/html/pihole').stdout
+    assert 'index.php' in web_directory
+    assert 'blockingpage.css' in web_directory
+
+
+def test_update_package_cache_success_no_errors(Pihole):
+    '''
+    confirms package cache was updated without any errors
+    '''
+    updateCache = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    update_package_cache
+    ''')
+    expected_stdout = tick_box + ' Update local cache of available packages'
+    assert expected_stdout in updateCache.stdout
+    assert 'error' not in updateCache.stdout.lower()
+
+
+def test_update_package_cache_failure_no_errors(Pihole):
+    '''
+    confirms package cache was not updated
+    '''
+    mock_command('apt-get', {'update': ('', '1')}, Pihole)
+    updateCache = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    update_package_cache
+    ''')
+    expected_stdout = cross_box + ' Update local cache of available packages'
+    assert expected_stdout in updateCache.stdout
+    assert 'Error: Unable to update package cache.' in updateCache.stdout
+
+
+def test_FTL_detect_aarch64_no_errors(Pihole):
+    '''
+    confirms only aarch64 package is downloaded for FTL engine
+    '''
+    # mock uname to return aarch64 platform
+    mock_command('uname', {'-m': ('aarch64', '0')}, Pihole)
+    # mock ldd to respond with aarch64 shared library
+    mock_command(
+        'ldd',
+        {
+            '/bin/ls': (
+                '/lib/ld-linux-aarch64.so.1',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Detected AArch64 (64 Bit ARM) processor'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_armv4t_no_errors(Pihole):
+    '''
+    confirms only armv4t package is downloaded for FTL engine
+    '''
+    # mock uname to return armv4t platform
+    mock_command('uname', {'-m': ('armv4t', '0')}, Pihole)
+    # mock ldd to respond with ld-linux shared library
+    mock_command('ldd', {'/bin/ls': ('/lib/ld-linux.so.3', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + (' Detected ARMv4 processor')
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_armv5te_no_errors(Pihole):
+    '''
+    confirms only armv5te package is downloaded for FTL engine
+    '''
+    # mock uname to return armv5te platform
+    mock_command('uname', {'-m': ('armv5te', '0')}, Pihole)
+    # mock ldd to respond with ld-linux shared library
+    mock_command('ldd', {'/bin/ls': ('/lib/ld-linux.so.3', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + (' Detected ARMv5 (or newer) processor')
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_armv6l_no_errors(Pihole):
+    '''
+    confirms only armv6l package is downloaded for FTL engine
+    '''
+    # mock uname to return armv6l platform
+    mock_command('uname', {'-m': ('armv6l', '0')}, Pihole)
+    # mock ldd to respond with ld-linux-armhf shared library
+    mock_command('ldd', {'/bin/ls': ('/lib/ld-linux-armhf.so.3', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + (' Detected ARMv6 processor '
+                                  '(with hard-float support)')
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_armv7l_no_errors(Pihole):
+    '''
+    confirms only armv7l package is downloaded for FTL engine
+    '''
+    # mock uname to return armv7l platform
+    mock_command('uname', {'-m': ('armv7l', '0')}, Pihole)
+    # mock ldd to respond with ld-linux-armhf shared library
+    mock_command('ldd', {'/bin/ls': ('/lib/ld-linux-armhf.so.3', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + (' Detected ARMv7 processor '
+                                  '(with hard-float support)')
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_armv8a_no_errors(Pihole):
+    '''
+    confirms only armv8a package is downloaded for FTL engine
+    '''
+    # mock uname to return armv8a platform
+    mock_command('uname', {'-m': ('armv8a', '0')}, Pihole)
+    # mock ldd to respond with ld-linux-armhf shared library
+    mock_command('ldd', {'/bin/ls': ('/lib/ld-linux-armhf.so.3', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Detected ARMv8 (or newer) processor'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_x86_64_no_errors(Pihole):
+    '''
+    confirms only x86_64 package is downloaded for FTL engine
+    '''
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = info_box + ' FTL Checks...'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Detected x86_64 processor'
+    assert expected_stdout in detectPlatform.stdout
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_detect_unknown_no_errors(Pihole):
+    ''' confirms only generic package is downloaded for FTL engine '''
+    # mock uname to return generic platform
+    mock_command('uname', {'-m': ('mips', '0')}, Pihole)
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    ''')
+    expected_stdout = 'Not able to detect processor (unknown: mips)'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_FTL_download_aarch64_no_errors(Pihole):
+    '''
+    confirms only aarch64 package is downloaded for FTL engine
+    '''
+    # mock whiptail answers and ensure installer dependencies
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    install_dependent_packages ${INSTALLER_DEPS[@]}
+    ''')
+    download_binary = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    FTLinstall "pihole-FTL-aarch64-linux-gnu"
+    ''')
+    expected_stdout = tick_box + ' Downloading and Installing FTL'
+    assert expected_stdout in download_binary.stdout
+    assert 'error' not in download_binary.stdout.lower()
+
+
+def test_FTL_binary_installed_and_responsive_no_errors(Pihole):
+    '''
+    confirms FTL binary is copied and functional in installed location
+    '''
+    installed_binary = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
+    pihole-FTL version
+    ''')
+    expected_stdout = 'v'
+    assert expected_stdout in installed_binary.stdout
+
+
+# def test_FTL_support_files_installed(Pihole):
+#     '''
+#     confirms FTL support files are installed
+#     '''
+#     support_files = Pihole.run('''
+#     source /opt/pihole/basic-install.sh
+#     FTLdetect
+#     stat -c '%a %n' /var/log/pihole-FTL.log
+#     stat -c '%a %n' /run/pihole-FTL.port
+#     stat -c '%a %n' /run/pihole-FTL.pid
+#     ls -lac /run
+#     ''')
+#     assert '644 /run/pihole-FTL.port' in support_files.stdout
+#     assert '644 /run/pihole-FTL.pid' in support_files.stdout
+#     assert '644 /var/log/pihole-FTL.log' in support_files.stdout
+
+
+def test_IPv6_only_link_local(Pihole):
+    '''
+    confirms IPv6 blocking is disabled for Link-local address
+    '''
+    # mock ip -6 address to return Link-local address
+    mock_command_2(
+        'ip',
+        {
+            '-6 address': (
+                'inet6 fe80::d210:52fa:fe00:7ad7/64 scope link',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    find_IPv6_information
+    ''')
+    expected_stdout = ('Unable to find IPv6 ULA/GUA address')
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_IPv6_only_ULA(Pihole):
+    '''
+    confirms IPv6 blocking is enabled for ULA addresses
+    '''
+    # mock ip -6 address to return ULA address
+    mock_command_2(
+        'ip',
+        {
+            '-6 address': (
+                'inet6 fda2:2001:5555:0:d210:52fa:fe00:7ad7/64 scope global',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    find_IPv6_information
+    ''')
+    expected_stdout = 'Found IPv6 ULA address'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_IPv6_only_GUA(Pihole):
+    '''
+    confirms IPv6 blocking is enabled for GUA addresses
+    '''
+    # mock ip -6 address to return GUA address
+    mock_command_2(
+        'ip',
+        {
+            '-6 address': (
+                'inet6 2003:12:1e43:301:d210:52fa:fe00:7ad7/64 scope global',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    find_IPv6_information
+    ''')
+    expected_stdout = 'Found IPv6 GUA address'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_IPv6_GUA_ULA_test(Pihole):
+    '''
+    confirms IPv6 blocking is enabled for GUA and ULA addresses
+    '''
+    # mock ip -6 address to return GUA and ULA addresses
+    mock_command_2(
+        'ip',
+        {
+            '-6 address': (
+                'inet6 2003:12:1e43:301:d210:52fa:fe00:7ad7/64 scope global\n'
+                'inet6 fda2:2001:5555:0:d210:52fa:fe00:7ad7/64 scope global',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    find_IPv6_information
+    ''')
+    expected_stdout = 'Found IPv6 ULA address'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_IPv6_ULA_GUA_test(Pihole):
+    '''
+    confirms IPv6 blocking is enabled for GUA and ULA addresses
+    '''
+    # mock ip -6 address to return ULA and GUA addresses
+    mock_command_2(
+        'ip',
+        {
+            '-6 address': (
+                'inet6 fda2:2001:5555:0:d210:52fa:fe00:7ad7/64 scope global\n'
+                'inet6 2003:12:1e43:301:d210:52fa:fe00:7ad7/64 scope global',
+                '0'
+            )
+        },
+        Pihole
+    )
+    detectPlatform = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    find_IPv6_information
+    ''')
+    expected_stdout = 'Found IPv6 ULA address'
+    assert expected_stdout in detectPlatform.stdout
+
+
+def test_validate_ip(Pihole):
+    '''
+    Tests valid_ip for various IP addresses
+    '''
+
+    def test_address(addr, success=True):
+        output = Pihole.run('''
+        source /opt/pihole/basic-install.sh
+        valid_ip "{addr}"
+        '''.format(addr=addr))
+
+        assert output.rc == 0 if success else 1
+
+    test_address('192.168.1.1')
+    test_address('127.0.0.1')
+    test_address('255.255.255.255')
+    test_address('255.255.255.256', False)
+    test_address('255.255.256.255', False)
+    test_address('255.256.255.255', False)
+    test_address('256.255.255.255', False)
+    test_address('1092.168.1.1', False)
+    test_address('not an IP', False)
+    test_address('8.8.8.8#', False)
+    test_address('8.8.8.8#0')
+    test_address('8.8.8.8#1')
+    test_address('8.8.8.8#42')
+    test_address('8.8.8.8#888')
+    test_address('8.8.8.8#1337')
+    test_address('8.8.8.8#65535')
+    test_address('8.8.8.8#65536', False)
+    test_address('8.8.8.8#-1', False)
+    test_address('00.0.0.0', False)
+    test_address('010.0.0.0', False)
+    test_address('001.0.0.0', False)
+    test_address('0.0.0.0#00', False)
+    test_address('0.0.0.0#01', False)
+    test_address('0.0.0.0#001', False)
+    test_address('0.0.0.0#0001', False)
+    test_address('0.0.0.0#00001', False)
+
+
+def test_os_check_fails(Pihole):
+    ''' Confirms install fails on unsupported OS '''
+    Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    install_dependent_packages ${OS_CHECK_DEPS[@]}
+    install_dependent_packages ${INSTALLER_DEPS[@]}
+    cat <<EOT > /etc/os-release
+    ID=UnsupportedOS
+    VERSION_ID="2"
+    EOT
+    ''')
+    detectOS = Pihole.run('''t
+    source /opt/pihole/basic-install.sh
+    os_check
+    ''')
+    expected_stdout = 'Unsupported OS detected: UnsupportedOS'
+    assert expected_stdout in detectOS.stdout
+
+
+def test_os_check_passes(Pihole):
+    ''' Confirms OS meets the requirements '''
+    Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    install_dependent_packages ${OS_CHECK_DEPS[@]}
+    install_dependent_packages ${INSTALLER_DEPS[@]}
+    ''')
+    detectOS = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    os_check
+    ''')
+    expected_stdout = 'Supported OS detected'
+    assert expected_stdout in detectOS.stdout
+
+
+def test_package_manager_has_installer_deps(Pihole):
+    ''' Confirms OS is able to install the required packages for the installer'''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    output = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    install_dependent_packages ${INSTALLER_DEPS[@]}
+    ''')
+
+    assert 'No package' not in output.stdout  # centos7 still exits 0...
+    assert output.rc == 0
+
+
+def test_package_manager_has_pihole_deps(Pihole):
+    ''' Confirms OS is able to install the required packages for Pi-hole '''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    output = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    select_rpm_php
+    install_dependent_packages ${PIHOLE_DEPS[@]}
+    ''')
+
+    assert 'No package' not in output.stdout  # centos7 still exits 0...
+    assert output.rc == 0
+
+
+def test_package_manager_has_web_deps(Pihole):
+    ''' Confirms OS is able to install the required packages for web '''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    output = Pihole.run('''
+    source /opt/pihole/basic-install.sh
+    package_manager_detect
+    select_rpm_php
+    install_dependent_packages ${PIHOLE_WEB_DEPS[@]}
+    ''')
+
+    assert 'No package' not in output.stdout  # centos7 still exits 0...
+    assert output.rc == 0
--- a/test/test_centos_7_support.py
+++ b/test/test_centos_7_support.py
@@ -5,11 +5,11 @@ from .conftest import (
 )


-def test_php_upgrade_default_optout_centos_eq_7(host):
+def test_php_upgrade_default_optout_centos_eq_7(Pihole):
    '''
    confirms the default behavior to opt-out of installing PHP7 from REMI
    '''
-    package_manager_detect = host.run('''
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -17,18 +17,18 @@ def test_php_upgrade_default_optout_centos_eq_7(host):
    expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                  'Deprecated PHP may be in use.')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_upgrade_user_optout_centos_eq_7(host):
+def test_php_upgrade_user_optout_centos_eq_7(Pihole):
    '''
    confirms installer behavior when user opt-out of installing PHP7 from REMI
    (php not currently installed)
    '''
    # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '1')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -36,18 +36,18 @@ def test_php_upgrade_user_optout_centos_eq_7(host):
    expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                  'Deprecated PHP may be in use.')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_upgrade_user_optin_centos_eq_7(host):
+def test_php_upgrade_user_optin_centos_eq_7(Pihole):
    '''
    confirms installer behavior when user opt-in to installing PHP7 from REMI
    (php not currently installed)
    '''
    # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -59,5 +59,5 @@ def test_php_upgrade_user_optin_centos_eq_7(host):
    expected_stdout = tick_box + (' Remi\'s RPM repository has '
                                  'been enabled for PHP7')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert remi_package.is_installed
--- a/test/test_centos_8_support.py
+++ b/test/test_centos_8_support.py
@@ -5,12 +5,12 @@ from .conftest import (
 )


-def test_php_upgrade_default_continue_centos_gte_8(host):
+def test_php_upgrade_default_continue_centos_gte_8(Pihole):
    '''
    confirms the latest version of CentOS continues / does not optout
    (should trigger on CentOS7 only)
    '''
-    package_manager_detect = host.run('''
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -19,19 +19,19 @@ def test_php_upgrade_default_continue_centos_gte_8(host):
                                    ' Deprecated PHP may be in use.')
    assert unexpected_stdout not in package_manager_detect.stdout
    # ensure remi was not installed on latest CentOS
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_upgrade_user_optout_skipped_centos_gte_8(host):
+def test_php_upgrade_user_optout_skipped_centos_gte_8(Pihole):
    '''
    confirms installer skips user opt-out of installing PHP7 from REMI on
    latest CentOS (should trigger on CentOS7 only)
    (php not currently installed)
    '''
    # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '1')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -40,19 +40,19 @@ def test_php_upgrade_user_optout_skipped_centos_gte_8(host):
                                    ' Deprecated PHP may be in use.')
    assert unexpected_stdout not in package_manager_detect.stdout
    # ensure remi was not installed on latest CentOS
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_upgrade_user_optin_skipped_centos_gte_8(host):
+def test_php_upgrade_user_optin_skipped_centos_gte_8(Pihole):
    '''
    confirms installer skips user opt-in to installing PHP7 from REMI on
    latest CentOS (should trigger on CentOS7 only)
    (php not currently installed)
    '''
    # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -64,5 +64,5 @@ def test_php_upgrade_user_optin_skipped_centos_gte_8(host):
    unexpected_stdout = tick_box + (' Remi\'s RPM repository has '
                                    'been enabled for PHP7')
    assert unexpected_stdout not in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed
--- a/test/test_centos_common_support.py
+++ b/test/test_centos_common_support.py
@@ -7,13 +7,13 @@ from .conftest import (
 )


-def test_release_supported_version_check_centos(host):
+def test_release_supported_version_check_centos(Pihole):
    '''
    confirms installer exits on unsupported releases of CentOS
    '''
    # modify /etc/redhat-release to mock an unsupported CentOS release
-    host.run('echo "CentOS Linux release 6.9" > /etc/redhat-release')
-    package_manager_detect = host.run('''
+    Pihole.run('echo "CentOS Linux release 6.9" > /etc/redhat-release')
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -24,11 +24,11 @@ def test_release_supported_version_check_centos(host):
    assert expected_stdout in package_manager_detect.stdout


-def test_enable_epel_repository_centos(host):
+def test_enable_epel_repository_centos(Pihole):
    '''
    confirms the EPEL package repository is enabled when installed on CentOS
    '''
-    package_manager_detect = host.run('''
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -38,22 +38,22 @@ def test_enable_epel_repository_centos(host):
    assert expected_stdout in package_manager_detect.stdout
    expected_stdout = tick_box + ' Installed epel-release'
    assert expected_stdout in package_manager_detect.stdout
-    epel_package = host.package('epel-release')
+    epel_package = Pihole.package('epel-release')
    assert epel_package.is_installed


-def test_php_version_lt_7_detected_upgrade_default_optout_centos(host):
+def test_php_version_lt_7_detected_upgrade_default_optout_centos(Pihole):
    '''
    confirms the default behavior to opt-out of upgrading to PHP7 from REMI
    '''
    # first we will install the default php version to test installer behavior
-    php_install = host.run('yum install -y php')
+    php_install = Pihole.run('yum install -y php')
    assert php_install.rc == 0
-    php_package = host.package('php')
+    php_package = Pihole.package('php')
    default_centos_php_version = php_package.version.split('.')[0]
    if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
        pytest.skip("Test deprecated . Detected default PHP version >= 7")
-    package_manager_detect = host.run('''
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -61,24 +61,24 @@ def test_php_version_lt_7_detected_upgrade_default_optout_centos(host):
    expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                  'Deprecated PHP may be in use.')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_version_lt_7_detected_upgrade_user_optout_centos(host):
+def test_php_version_lt_7_detected_upgrade_user_optout_centos(Pihole):
    '''
    confirms installer behavior when user opt-out to upgrade to PHP7 via REMI
    '''
    # first we will install the default php version to test installer behavior
-    php_install = host.run('yum install -y php')
+    php_install = Pihole.run('yum install -y php')
    assert php_install.rc == 0
-    php_package = host.package('php')
+    php_package = Pihole.package('php')
    default_centos_php_version = php_package.version.split('.')[0]
    if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
        pytest.skip("Test deprecated . Detected default PHP version >= 7")
    # Whiptail dialog returns Cancel for user prompt
-    mock_command('whiptail', {'*': ('', '1')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '1')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -86,24 +86,24 @@ def test_php_version_lt_7_detected_upgrade_user_optout_centos(host):
    expected_stdout = info_box + (' User opt-out of PHP 7 upgrade on CentOS. '
                                  'Deprecated PHP may be in use.')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed


-def test_php_version_lt_7_detected_upgrade_user_optin_centos(host):
+def test_php_version_lt_7_detected_upgrade_user_optin_centos(Pihole):
    '''
    confirms installer behavior when user opt-in to upgrade to PHP7 via REMI
    '''
    # first we will install the default php version to test installer behavior
-    php_install = host.run('yum install -y php')
+    php_install = Pihole.run('yum install -y php')
    assert php_install.rc == 0
-    php_package = host.package('php')
+    php_package = Pihole.package('php')
    default_centos_php_version = php_package.version.split('.')[0]
    if int(default_centos_php_version) >= 7:  # PHP7 is supported/recommended
        pytest.skip("Test deprecated . Detected default PHP version >= 7")
    # Whiptail dialog returns Continue for user prompt
-    mock_command('whiptail', {'*': ('', '0')}, host)
-    package_manager_detect = host.run('''
+    mock_command('whiptail', {'*': ('', '0')}, Pihole)
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
@@ -118,8 +118,8 @@ def test_php_version_lt_7_detected_upgrade_user_optin_centos(host):
    expected_stdout = tick_box + (' Remi\'s RPM repository has '
                                  'been enabled for PHP7')
    assert expected_stdout in package_manager_detect.stdout
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert remi_package.is_installed
-    updated_php_package = host.package('php')
+    updated_php_package = Pihole.package('php')
    updated_php_version = updated_php_package.version.split('.')[0]
    assert int(updated_php_version) == 7
--- a/test/test_centos_fedora_common_support.py
+++ b/test/test_centos_fedora_common_support.py
@@ -5,7 +5,7 @@ from .conftest import (
 )


-def mock_selinux_config(state, host):
+def mock_selinux_config(state, Pihole):
    '''
    Creates a mock SELinux config file with expected content
    '''
@@ -13,20 +13,20 @@ def mock_selinux_config(state, host):
    valid_states = ['enforcing', 'permissive', 'disabled']
    assert state in valid_states
    # getenforce returns the running state of SELinux
-    mock_command('getenforce', {'*': (state.capitalize(), '0')}, host)
+    mock_command('getenforce', {'*': (state.capitalize(), '0')}, Pihole)
    # create mock configuration with desired content
-    host.run('''
+    Pihole.run('''
    mkdir /etc/selinux
    echo "SELINUX={state}" > /etc/selinux/config
    '''.format(state=state.lower()))


-def test_selinux_enforcing_exit(host):
+def test_selinux_enforcing_exit(Pihole):
    '''
    confirms installer prompts to exit when SELinux is Enforcing by default
    '''
-    mock_selinux_config("enforcing", host)
-    check_selinux = host.run('''
+    mock_selinux_config("enforcing", Pihole)
+    check_selinux = Pihole.run('''
    source /opt/pihole/basic-install.sh
    checkSelinux
    ''')
@@ -37,12 +37,12 @@ def test_selinux_enforcing_exit(host):
    assert check_selinux.rc == 1


-def test_selinux_permissive(host):
+def test_selinux_permissive(Pihole):
    '''
    confirms installer continues when SELinux is Permissive
    '''
-    mock_selinux_config("permissive", host)
-    check_selinux = host.run('''
+    mock_selinux_config("permissive", Pihole)
+    check_selinux = Pihole.run('''
    source /opt/pihole/basic-install.sh
    checkSelinux
    ''')
@@ -51,12 +51,12 @@ def test_selinux_permissive(host):
    assert check_selinux.rc == 0


-def test_selinux_disabled(host):
+def test_selinux_disabled(Pihole):
    '''
    confirms installer continues when SELinux is Disabled
    '''
-    mock_selinux_config("disabled", host)
-    check_selinux = host.run('''
+    mock_selinux_config("disabled", Pihole)
+    check_selinux = Pihole.run('''
    source /opt/pihole/basic-install.sh
    checkSelinux
    ''')
--- a/test/test_fedora_support.py
+++ b/test/test_fedora_support.py
@@ -1,16 +1,16 @@
-def test_epel_and_remi_not_installed_fedora(host):
+def test_epel_and_remi_not_installed_fedora(Pihole):
    '''
    confirms installer does not attempt to install EPEL/REMI repositories
    on Fedora
    '''
-    package_manager_detect = host.run('''
+    package_manager_detect = Pihole.run('''
    source /opt/pihole/basic-install.sh
    package_manager_detect
    select_rpm_php
    ''')
    assert package_manager_detect.stdout == ''

-    epel_package = host.package('epel-release')
+    epel_package = Pihole.package('epel-release')
    assert not epel_package.is_installed
-    remi_package = host.package('remi-release')
+    remi_package = Pihole.package('remi-release')
    assert not remi_package.is_installed
--- a/test/tox.centos_7.ini
+++ b/test/tox.centos_7.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _centos_7.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py ./test_centos_7_support.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py ./test_centos_7_support.py
--- a/test/tox.centos_8.ini
+++ b/test/tox.centos_8.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _centos_8.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py ./test_centos_8_support.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py ./test_centos_fedora_common_support.py ./test_centos_common_support.py ./test_centos_8_support.py
--- a/test/tox.debian_10.ini
+++ b/test/tox.debian_10.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _debian_10.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.debian_11.ini
+++ b/test/tox.debian_11.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _debian_11.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.debian_9.ini
+++ b/test/tox.debian_9.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _debian_9.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.fedora_33.ini
+++ b/test/tox.fedora_33.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _fedora_33.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_fedora_support.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py ./test_centos_fedora_common_support.py ./test_fedora_support.py
--- a/test/tox.fedora_34.ini
+++ b/test/tox.fedora_34.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _fedora_34.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py ./test_fedora_support.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py ./test_centos_fedora_common_support.py ./test_fedora_support.py
--- a/test/tox.ubuntu_16.ini
+++ b/test/tox.ubuntu_16.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _ubuntu_16.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.ubuntu_18.ini
+++ b/test/tox.ubuntu_18.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _ubuntu_18.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.ubuntu_20.ini
+++ b/test/tox.ubuntu_20.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _ubuntu_20.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
--- a/test/tox.ubuntu_21.ini
+++ b/test/tox.ubuntu_21.ini
@@ -1,8 +1,8 @@
 [tox]
-envlist = py38
+envlist = py37

 [testenv]
 whitelist_externals = docker
 deps = -rrequirements.txt
 commands = docker build -f _ubuntu_21.Dockerfile -t pytest_pihole:test_container ../
-           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py
+           pytest {posargs:-vv -n auto} ./test_automated_install.py
Author	SHA1	Message	Date
Christian König	0841a7ad06	Fix typos Signed-off-by: Christian König <ckoenig@posteo.de>	2021-10-31 18:30:40 +01:00
Christian König	496955a513	Hand arguments to functions Signed-off-by: Christian König <ckoenig@posteo.de>	2021-10-26 21:11:38 +02:00
Christian König	49f218866f	Document all pihole -a functions in help text and remove two obsolet functions Signed-off-by: Christian König <ckoenig@posteo.de>	2021-10-26 20:09:33 +02:00