Merge pull request #3160 from pi-hole/release/v4.3.5

Hotfix 4.3.5

advanced/Scripts/piholeCheckout.sh

@@ -46,6 +46,12 @@ checkout() {
     local corebranches
     local webbranches
 
+    # Check if FTL is installed - do this early on as FTL is a hard dependency for Pi-hole
+    local funcOutput
+    funcOutput=$(get_binary_name) #Store output of get_binary_name here
+    local binary
+    binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
+
     # Avoid globbing
     set -f
 
@@ -86,7 +92,6 @@ checkout() {
         fi
         #echo -e "  ${TICK} Pi-hole Core"
 
-        get_binary_name
         local path
         path="development/${binary}"
         echo "development" > /etc/pihole/ftlbranch
@@ -100,7 +105,6 @@ checkout() {
             fetch_checkout_pull_branch "${webInterfaceDir}" "master" || { echo "  ${CROSS} Unable to pull Web master branch"; exit 1; }
         fi
         #echo -e "  ${TICK} Web Interface"
-        get_binary_name
         local path
         path="master/${binary}"
         echo "master" > /etc/pihole/ftlbranch
@@ -159,7 +163,6 @@ checkout() {
         fi
         checkout_pull_branch "${webInterfaceDir}" "${2}"
     elif [[ "${1}" == "ftl" ]] ; then
-        get_binary_name
         local path
         path="${2}/${binary}"
 

advanced/Scripts/piholeDebug.sh

@@ -643,19 +643,21 @@ ping_internet() {
 }
 
 compare_port_to_service_assigned() {
-    local service_name="${1}"
-    # The programs we use may change at some point, so they are in a varible here
-    local resolver="pihole-FTL"
-    local web_server="lighttpd"
-    local ftl="pihole-FTL"
+    local service_name
+    local expected_service
+    local port
+
+    service_name="${2}"
+    expected_service="${1}"
+    port="${3}"
 
     # If the service is a Pi-hole service, highlight it in green
-    if [[ "${service_name}" == "${resolver}" ]] || [[ "${service_name}" == "${web_server}" ]] || [[ "${service_name}" == "${ftl}" ]]; then
-        log_write "[${COL_GREEN}${port_number}${COL_NC}] is in use by ${COL_GREEN}${service_name}${COL_NC}"
+    if [[ "${service_name}" == "${expected_service}" ]]; then
+        log_write "[${COL_GREEN}${port}${COL_NC}] is in use by ${COL_GREEN}${service_name}${COL_NC}"
     # Otherwise,
     else
         # Show the service name in red since it's non-standard
-        log_write "[${COL_RED}${port_number}${COL_NC}] is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
+        log_write "[${COL_RED}${port}${COL_NC}] is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
     fi
 }
 
@@ -689,11 +691,11 @@ check_required_ports() {
         fi
         # Use a case statement to determine if the right services are using the right ports
         case "$(echo "$port_number" | rev | cut -d: -f1 | rev)" in
-            53) compare_port_to_service_assigned  "${resolver}"
+            53) compare_port_to_service_assigned  "${resolver}" "${service_name}" 53
                 ;;
-            80) compare_port_to_service_assigned  "${web_server}"
+            80) compare_port_to_service_assigned  "${web_server}" "${service_name}" 80
                 ;;
-            4711) compare_port_to_service_assigned  "${ftl}"
+            4711) compare_port_to_service_assigned  "${ftl}" "${service_name}" 4711
                 ;;
             # If it's not a default port that Pi-hole needs, just print it out for the user to see
             *) log_write "${port_number} ${service_name} (${protocol_type})";

advanced/Scripts/update.sh

@@ -31,7 +31,6 @@ source "/opt/pihole/COL_TABLE"
 # make_repo() sourced from basic-install.sh
 # update_repo() source from basic-install.sh
 # getGitFiles() sourced from basic-install.sh
-# get_binary_name() sourced from basic-install.sh
 # FTLcheckUpdate() sourced from basic-install.sh
 
 GitCheckUpdateAvail() {
@@ -129,7 +128,12 @@ main() {
         fi
     fi
 
-    if FTLcheckUpdate > /dev/null; then
+    local funcOutput
+    funcOutput=$(get_binary_name) #Store output of get_binary_name here
+    local binary
+    binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
+
+    if FTLcheckUpdate "${binary}" > /dev/null; then
         FTL_update=true
         echo -e "  ${INFO} FTL:\\t\\t${COL_YELLOW}update available${COL_NC}"
     else
@@ -194,6 +198,14 @@ main() {
         ${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || \
         echo -e "${basicError}" && exit 1
     fi
+
+    if [[ "${FTL_update}" == true || "${core_update}" == true || "${web_update}" == true ]]; then
+        # Force an update of the updatechecker
+        /opt/pihole/updatecheck.sh
+        /opt/pihole/updatecheck.sh x remote
+        echo -e "  ${INFO} Local version file information updated."
+    fi
+
     echo ""
     exit 0
 }

automated install/basic-install.sh

@@ -139,9 +139,6 @@ else
     OVER="\\r\\033[K"
 fi
 
-# Define global binary variable
-binary="tbd"
-
 # A simple function that just echoes out our logo in ASCII format
 # This lets users know that it is a Pi-hole, LLC product
 show_ascii_berry() {
@@ -2154,21 +2151,15 @@ clone_or_update_repos() {
 }
 
 # Download FTL binary to random temp directory and install FTL binary
+# Disable directive for SC2120 a value _can_ be passed to this function, but it is passed from an external script that sources this one
+# shellcheck disable=SC2120
 FTLinstall() {
+
     # Local, named variables
     local latesttag
     local str="Downloading and Installing FTL"
     printf "  %b %s..." "${INFO}" "${str}"
 
-    # Find the latest version tag for FTL
-    latesttag=$(curl -sI https://github.com/pi-hole/FTL/releases/latest | grep "Location" | awk -F '/' '{print $NF}')
-    # Tags should always start with v, check for that.
-    if [[ ! "${latesttag}" == v* ]]; then
-        printf "%b  %b %s\\n" "${OVER}" "${CROSS}" "${str}"
-        printf "  %bError: Unable to get latest release location from GitHub%b\\n" "${COL_LIGHT_RED}" "${COL_NC}"
-        return 1
-    fi
-
     # Move into the temp ftl directory
     pushd "$(mktemp -d)" > /dev/null || { printf "Unable to make temporary directory for FTL binary download\\n"; return 1; }
 
@@ -2184,9 +2175,12 @@ FTLinstall() {
         ftlBranch="master"
     fi
 
+    local binary
+    binary="${1}"
+
     # Determine which version of FTL to download
     if [[ "${ftlBranch}" == "master" ]];then
-        url="https://github.com/pi-hole/FTL/releases/download/${latesttag%$'\r'}"
+        url="https://github.com/pi-hole/ftl/releases/latest/download"
     else
         url="https://ftl.pi-hole.net/${ftlBranch}"
     fi
@@ -2259,6 +2253,8 @@ get_binary_name() {
     local machine
     machine=$(uname -m)
 
+    local l_binary
+
     local str="Detecting architecture"
     printf "  %b %s..." "${INFO}" "${str}"
     # If the machine is arm or aarch
@@ -2274,24 +2270,24 @@ get_binary_name() {
         if [[ "${lib}" == "/lib/ld-linux-aarch64.so.1" ]]; then
             printf "%b  %b Detected ARM-aarch64 architecture\\n" "${OVER}" "${TICK}"
             # set the binary to be used
-            binary="pihole-FTL-aarch64-linux-gnu"
+            l_binary="pihole-FTL-aarch64-linux-gnu"
         #
         elif [[ "${lib}" == "/lib/ld-linux-armhf.so.3" ]]; then
             #
             if [[ "${rev}" -gt 6 ]]; then
                 printf "%b  %b Detected ARM-hf architecture (armv7+)\\n" "${OVER}" "${TICK}"
                 # set the binary to be used
-                binary="pihole-FTL-arm-linux-gnueabihf"
+                l_binary="pihole-FTL-arm-linux-gnueabihf"
             # Otherwise,
             else
                 printf "%b  %b Detected ARM-hf architecture (armv6 or lower) Using ARM binary\\n" "${OVER}" "${TICK}"
                 # set the binary to be used
-                binary="pihole-FTL-arm-linux-gnueabi"
+                l_binary="pihole-FTL-arm-linux-gnueabi"
             fi
         else
             printf "%b  %b Detected ARM architecture\\n" "${OVER}" "${TICK}"
             # set the binary to be used
-            binary="pihole-FTL-arm-linux-gnueabi"
+            l_binary="pihole-FTL-arm-linux-gnueabi"
         fi
     elif [[ "${machine}" == "x86_64" ]]; then
         # This gives the architecture of packages dpkg installs (for example, "i386")
@@ -2304,12 +2300,12 @@ get_binary_name() {
         # in the past (see https://github.com/pi-hole/pi-hole/pull/2004)
         if [[ "${dpkgarch}" == "i386" ]]; then
             printf "%b  %b Detected 32bit (i686) architecture\\n" "${OVER}" "${TICK}"
-            binary="pihole-FTL-linux-x86_32"
+            l_binary="pihole-FTL-linux-x86_32"
         else
             # 64bit
             printf "%b  %b Detected x86_64 architecture\\n" "${OVER}" "${TICK}"
             # set the binary to be used
-            binary="pihole-FTL-linux-x86_64"
+            l_binary="pihole-FTL-linux-x86_64"
         fi
     else
         # Something else - we try to use 32bit executable and warn the user
@@ -2320,13 +2316,13 @@ get_binary_name() {
         else
             printf "%b  %b Detected 32bit (i686) architecture\\n" "${OVER}" "${TICK}"
         fi
-        binary="pihole-FTL-linux-x86_32"
+        l_binary="pihole-FTL-linux-x86_32"
     fi
+
+    echo ${l_binary}
 }
 
 FTLcheckUpdate() {
-    get_binary_name
-
     #In the next section we check to see if FTL is already installed (in case of pihole -r).
     #If the installed version matches the latest version, then check the installed sha1sum of the binary vs the remote sha1sum. If they do not match, then download
     printf "  %b Checking for existing FTL binary...\\n" "${INFO}"
@@ -2342,6 +2338,9 @@ FTLcheckUpdate() {
         ftlBranch="master"
     fi
 
+    local binary
+    binary="${1}"
+
     local remoteSha1
     local localSha1
 
@@ -2383,17 +2382,14 @@ FTLcheckUpdate() {
         if [[ ${ftlLoc} ]]; then
             local FTLversion
             FTLversion=$(/usr/bin/pihole-FTL tag)
-            local FTLreleaseData
             local FTLlatesttag
 
-            if ! FTLreleaseData=$(curl -sI https://github.com/pi-hole/FTL/releases/latest); then
+            if ! FTLlatesttag=$(curl -sI https://github.com/pi-hole/FTL/releases/latest | grep --color=never -i Location | awk -F / '{print $NF}' | tr -d '[:cntrl:]'); then
                 # There was an issue while retrieving the latest version
                 printf "  %b Failed to retrieve latest FTL release metadata" "${CROSS}"
                 return 3
             fi
 
-            FTLlatesttag=$(grep 'Location' <<< "${FTLreleaseData}" | awk -F '/' '{print $NF}' | tr -d '\r\n')
-
             if [[ "${FTLversion}" != "${FTLlatesttag}" ]]; then
                 return 0
             else
@@ -2420,8 +2416,10 @@ FTLcheckUpdate() {
 FTLdetect() {
     printf "\\n  %b FTL Checks...\\n\\n" "${INFO}"
 
-    if FTLcheckUpdate ; then
-        FTLinstall || return 1
+    printf "  %b" "${2}"
+
+    if FTLcheckUpdate "${1}"; then
+        FTLinstall "${1}" || return 1
     fi
 }
 
@@ -2581,8 +2579,17 @@ main() {
     else
         LIGHTTPD_ENABLED=false
     fi
+    # Create the pihole user
+    create_pihole_user
+
     # Check if FTL is installed - do this early on as FTL is a hard dependency for Pi-hole
-    if ! FTLdetect; then
+    local funcOutput
+    funcOutput=$(get_binary_name) #Store output of get_binary_name here
+    local binary
+    binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL)
+    local theRest
+    theRest="${funcOutput%pihole-FTL*}" # Print the rest of get_binary_name's output to display (cut out from first instance of "pihole-FTL")
+    if ! FTLdetect "${binary}" "${theRest}"; then
         printf "  %b FTL Engine not installed\\n" "${CROSS}"
         exit 1
     fi

test/test_automated_install.py

@@ -398,7 +398,11 @@ def test_FTL_detect_aarch64_no_errors(Pihole):
     )
     detectPlatform = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     ''')
     expected_stdout = info_box + ' FTL Checks...'
     assert expected_stdout in detectPlatform.stdout
@@ -418,7 +422,11 @@ def test_FTL_detect_armv6l_no_errors(Pihole):
     mock_command('ldd', {'/bin/ls': ('/lib/ld-linux-armhf.so.3', '0')}, Pihole)
     detectPlatform = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     ''')
     expected_stdout = info_box + ' FTL Checks...'
     assert expected_stdout in detectPlatform.stdout
@@ -439,7 +447,11 @@ def test_FTL_detect_armv7l_no_errors(Pihole):
     mock_command('ldd', {'/bin/ls': ('/lib/ld-linux-armhf.so.3', '0')}, Pihole)
     detectPlatform = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     ''')
     expected_stdout = info_box + ' FTL Checks...'
     assert expected_stdout in detectPlatform.stdout
@@ -455,7 +467,11 @@ def test_FTL_detect_x86_64_no_errors(Pihole):
     '''
     detectPlatform = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     ''')
     expected_stdout = info_box + ' FTL Checks...'
     assert expected_stdout in detectPlatform.stdout
@@ -471,7 +487,11 @@ def test_FTL_detect_unknown_no_errors(Pihole):
     mock_command('uname', {'-m': ('mips', '0')}, Pihole)
     detectPlatform = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     ''')
     expected_stdout = 'Not able to detect architecture (unknown: mips)'
     assert expected_stdout in detectPlatform.stdout
@@ -490,68 +510,25 @@ def test_FTL_download_aarch64_no_errors(Pihole):
     ''')
     download_binary = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    binary="pihole-FTL-aarch64-linux-gnu"
-    FTLinstall
+    create_pihole_user
+    FTLinstall "pihole-FTL-aarch64-linux-gnu"
     ''')
     expected_stdout = tick_box + ' Downloading and Installing FTL'
     assert expected_stdout in download_binary.stdout
     assert 'error' not in download_binary.stdout.lower()
 
 
-def test_FTL_download_unknown_fails_no_errors(Pihole):
-    '''
-    confirms unknown binary is not downloaded for FTL engine
-    '''
-    # mock whiptail answers and ensure installer dependencies
-    mock_command('whiptail', {'*': ('', '0')}, Pihole)
-    Pihole.run('''
-    source /opt/pihole/basic-install.sh
-    distro_check
-    install_dependent_packages ${INSTALLER_DEPS[@]}
-    ''')
-    download_binary = Pihole.run('''
-    source /opt/pihole/basic-install.sh
-    binary="pihole-FTL-mips"
-    FTLinstall
-    ''')
-    expected_stdout = cross_box + ' Downloading and Installing FTL'
-    assert expected_stdout in download_binary.stdout
-    error1 = 'Error: URL https://github.com/pi-hole/FTL/releases/download/'
-    assert error1 in download_binary.stdout
-    error2 = 'not found'
-    assert error2 in download_binary.stdout
-
-
-def test_FTL_download_binary_unset_no_errors(Pihole):
-    '''
-    confirms unset binary variable does not download FTL engine
-    '''
-    # mock whiptail answers and ensure installer dependencies
-    mock_command('whiptail', {'*': ('', '0')}, Pihole)
-    Pihole.run('''
-    source /opt/pihole/basic-install.sh
-    distro_check
-    install_dependent_packages ${INSTALLER_DEPS[@]}
-    ''')
-    download_binary = Pihole.run('''
-    source /opt/pihole/basic-install.sh
-    FTLinstall
-    ''')
-    expected_stdout = cross_box + ' Downloading and Installing FTL'
-    assert expected_stdout in download_binary.stdout
-    error1 = 'Error: URL https://github.com/pi-hole/FTL/releases/download/'
-    assert error1 in download_binary.stdout
-    error2 = 'not found'
-    assert error2 in download_binary.stdout
-
-
 def test_FTL_binary_installed_and_responsive_no_errors(Pihole):
     '''
     confirms FTL binary is copied and functional in installed location
     '''
     installed_binary = Pihole.run('''
     source /opt/pihole/basic-install.sh
-    FTLdetect
+    create_pihole_user
+    funcOutput=$(get_binary_name)
+    binary="pihole-FTL${funcOutput##*pihole-FTL}"
+    theRest="${funcOutput%pihole-FTL*}"
+    FTLdetect "${binary}" "${theRest}"
     pihole-FTL version
     ''')
     expected_stdout = 'v'